2020-02-28 06:33:07

by Amit Kucheria

[permalink] [raw]
Subject: [PATCH v4 0/3] Cleanup dtbs_check warnings for tsens

Make dtbs_check pass for tsens bits. I'm working on another series to
cleanup other DT warnings for QC platforms.

Changes since v3:
- Fixed up subject prefix
- Added acks.

Amit Kucheria (3):
dt-bindings: thermal: tsens: Add entry for sc7180 tsens to binding
arm64: dts: qcom: msm8916:: Add qcom,tsens-v0_1 to msm8916.dtsi
compatible
arm64: dts: qcom: msm8996:: Add qcom,tsens-v2 to msm8996.dtsi
compatible

Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +-
arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++--
3 files changed, 4 insertions(+), 3 deletions(-)

--
2.20.1


2020-02-28 06:33:29

by Amit Kucheria

[permalink] [raw]
Subject: [PATCH v4 1/3] dt-bindings: thermal: tsens: Add entry for sc7180 tsens to binding

The qcom-tsens binding requires a SoC-specific and a TSENS
family-specific binding to be specified in the compatible string.

Since qcom,sc7180-tsens is not listed in the YAML binding, we see the
following warnings in 'make dtbs_check'. Fix them.

builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible: ['qcom,sc7180-tsens',
'qcom,tsens-v2'] is not valid under any of the given schemas (Possible
causes of the failure):
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:1: 'qcom,tsens-v0_1' was expected
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:1: 'qcom,tsens-v1' was expected

builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible: ['qcom,sc7180-tsens',
'qcom,tsens-v2'] is not valid under any of the given schemas (Possible
causes of the failure):
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:1: 'qcom,tsens-v0_1' was expected
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:1: 'qcom,tsens-v1' was expected

Signed-off-by: Amit Kucheria <[email protected]>
Reviewed-by: Vinod Koul <[email protected]>
---
Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index eef13b9446a8..13e294328932 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -39,6 +39,7 @@ properties:
- qcom,msm8996-tsens
- qcom,msm8998-tsens
- qcom,sdm845-tsens
+ - qcom,sc7180-tsens
- const: qcom,tsens-v2

reg:
--
2.20.1

2020-02-28 06:34:39

by Amit Kucheria

[permalink] [raw]
Subject: [PATCH v4 2/3] arm64: dts: qcom: msm8916:: Add qcom,tsens-v0_1 to msm8916.dtsi compatible

The qcom-tsens binding requires a SoC-specific and a TSENS
family-specific binding to be specified in the compatible string.

Since them family-specific binding is not listed in the .dtsi file, we
see the following warnings in 'make dtbs_check'. Fix them.

/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
thermal-sensor@4a9000: compatible: ['qcom,msm8916-tsens'] is not valid
under any of the given schemas (Possible causes of the failure):
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
thermal-sensor@4a9000: compatible: ['qcom,msm8916-tsens'] is too short
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
thermal-sensor@4a9000: compatible:0: 'qcom,msm8916-tsens' is not one of
['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
thermal-sensor@4a9000: compatible:0: 'qcom,msm8916-tsens' is not one of
['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']

Signed-off-by: Amit Kucheria <[email protected]>
Reviewed-by: Vinod Koul <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 9f31064f2374..1748ea3f4b4f 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -860,7 +860,7 @@
};

tsens: thermal-sensor@4a9000 {
- compatible = "qcom,msm8916-tsens";
+ compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
reg = <0x4a9000 0x1000>, /* TM */
<0x4a8000 0x1000>; /* SROT */
nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
--
2.20.1

2020-02-28 06:34:41

by Amit Kucheria

[permalink] [raw]
Subject: [PATCH v4 3/3] arm64: dts: qcom: msm8996:: Add qcom,tsens-v2 to msm8996.dtsi compatible

The qcom-tsens binding requires a SoC-specific and a TSENS
family-specific binding to be specified in the compatible string.

Since them family-specific binding is not listed in the .dtsi file, we
see the following warnings in 'make dtbs_check'. Fix them.

/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible: ['qcom,msm8996-tsens'] is not valid
under any of the given schemas (Possible causes of the failure):
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible: ['qcom,msm8996-tsens'] is too short
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible:0: 'qcom,msm8996-tsens' is not one of
['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4a9000: compatible:0: 'qcom,msm8996-tsens' is not one of
['qcom,msm8976-tsens', 'qcom,qcs404-tsens']

/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible: ['qcom,msm8996-tsens'] is not valid
under any of the given schemas (Possible causes of the failure):
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible: ['qcom,msm8996-tsens'] is too short
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible:0: 'qcom,msm8996-tsens' is not one of
['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
/home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml:
thermal-sensor@4ad000: compatible:0: 'qcom,msm8996-tsens' is not one of
['qcom,msm8976-tsens', 'qcom,qcs404-tsens']

Signed-off-by: Amit Kucheria <[email protected]>
Reviewed-by: Vinod Koul <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 7ae082ea14ea..f157cd4f53b4 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -446,7 +446,7 @@
};

tsens0: thermal-sensor@4a9000 {
- compatible = "qcom,msm8996-tsens";
+ compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
reg = <0x004a9000 0x1000>, /* TM */
<0x004a8000 0x1000>; /* SROT */
#qcom,sensors = <13>;
@@ -457,7 +457,7 @@
};

tsens1: thermal-sensor@4ad000 {
- compatible = "qcom,msm8996-tsens";
+ compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
reg = <0x004ad000 0x1000>, /* TM */
<0x004ac000 0x1000>; /* SROT */
#qcom,sensors = <8>;
--
2.20.1

2020-02-28 06:46:55

by Bjorn Andersson

[permalink] [raw]
Subject: Re: [PATCH v4 0/3] Cleanup dtbs_check warnings for tsens

On Thu 27 Feb 22:32 PST 2020, Amit Kucheria wrote:

> Make dtbs_check pass for tsens bits. I'm working on another series to
> cleanup other DT warnings for QC platforms.
>

Thanks for the fast respin, patch 2 and 3 applied.

> Changes since v3:
> - Fixed up subject prefix
> - Added acks.
>
> Amit Kucheria (3):
> dt-bindings: thermal: tsens: Add entry for sc7180 tsens to binding
> arm64: dts: qcom: msm8916:: Add qcom,tsens-v0_1 to msm8916.dtsi
> compatible
> arm64: dts: qcom: msm8996:: Add qcom,tsens-v2 to msm8996.dtsi
> compatible
>
> Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
> arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +-
> arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++--
> 3 files changed, 4 insertions(+), 3 deletions(-)
>
> --
> 2.20.1
>

2020-03-03 01:30:09

by Rob Herring (Arm)

[permalink] [raw]
Subject: Re: [PATCH v4 1/3] dt-bindings: thermal: tsens: Add entry for sc7180 tsens to binding

On Fri, 28 Feb 2020 12:02:40 +0530, Amit Kucheria wrote:
> The qcom-tsens binding requires a SoC-specific and a TSENS
> family-specific binding to be specified in the compatible string.
>
> Since qcom,sc7180-tsens is not listed in the YAML binding, we see the
> following warnings in 'make dtbs_check'. Fix them.
>
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible: ['qcom,sc7180-tsens',
> 'qcom,tsens-v2'] is not valid under any of the given schemas (Possible
> causes of the failure):
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible:1: 'qcom,tsens-v0_1' was expected
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible:1: 'qcom,tsens-v1' was expected
>
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible: ['qcom,sc7180-tsens',
> 'qcom,tsens-v2'] is not valid under any of the given schemas (Possible
> causes of the failure):
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible:1: 'qcom,tsens-v0_1' was expected
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible:1: 'qcom,tsens-v1' was expected
>
> Signed-off-by: Amit Kucheria <[email protected]>
> Reviewed-by: Vinod Koul <[email protected]>
> ---
> Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
> 1 file changed, 1 insertion(+)
>

Acked-by: Rob Herring <[email protected]>

2020-03-03 08:07:09

by Daniel Lezcano

[permalink] [raw]
Subject: Re: [PATCH v4 1/3] dt-bindings: thermal: tsens: Add entry for sc7180 tsens to binding

On 28/02/2020 07:32, Amit Kucheria wrote:

[ ... ]

> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> index eef13b9446a8..13e294328932 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> @@ -39,6 +39,7 @@ properties:
> - qcom,msm8996-tsens
> - qcom,msm8998-tsens
> - qcom,sdm845-tsens
> + - qcom,sc7180-tsens

This change is already done by

https://patchwork.kernel.org/patch/11319259/

I've applied it.

--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

2020-03-03 08:54:07

by Amit Kucheria

[permalink] [raw]
Subject: Re: [PATCH v4 1/3] dt-bindings: thermal: tsens: Add entry for sc7180 tsens to binding

On Tue, Mar 3, 2020 at 1:35 PM Daniel Lezcano <[email protected]> wrote:
>
> On 28/02/2020 07:32, Amit Kucheria wrote:
>
> [ ... ]
>
> > diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> > index eef13b9446a8..13e294328932 100644
> > --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> > +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> > @@ -39,6 +39,7 @@ properties:
> > - qcom,msm8996-tsens
> > - qcom,msm8998-tsens
> > - qcom,sdm845-tsens
> > + - qcom,sc7180-tsens
>
> This change is already done by
>
> https://patchwork.kernel.org/patch/11319259/
>
> I've applied it.

Good catch! I'd forgotten I'd even reviewed it when I saw all these
warnings with dtbs_check :-)