Amend the atmel mci pin controller to optionally take a pin control
handle and set the state of the pins to:
- "default" on boot, resume and before performing an transfer.
- "sleep" on suspend().
This should make it possible to optimize energy usage for the pins
both for the suspend/resume cycle.
Signed-off-by: Wenyou Yang <[email protected]>
---
Hi Ulf,
Thanks a lot.
According to your advice, remove pinctrl_pm_select_default_state(&pdev->dev) from the _probe function.
Best Regards,
Wenyou Yang
drivers/mmc/host/atmel-mci.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 4df1599..a7b59ba 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -39,6 +39,7 @@
#include <linux/atmel_pdc.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
+#include <linux/pinctrl/consumer.h>
#include <asm/cacheflush.h>
#include <asm/io.h>
@@ -2568,6 +2569,8 @@ static int atmci_runtime_suspend(struct device *dev)
clk_disable_unprepare(host->mck);
+ pinctrl_pm_select_sleep_state(dev);
+
return 0;
}
@@ -2575,6 +2578,8 @@ static int atmci_runtime_resume(struct device *dev)
{
struct atmel_mci *host = dev_get_drvdata(dev);
+ pinctrl_pm_select_default_state(dev);
+
return clk_prepare_enable(host->mck);
}
#endif
--
1.7.9.5
On 7 November 2014 01:48, Wenyou Yang <[email protected]> wrote:
> Amend the atmel mci pin controller to optionally take a pin control
> handle and set the state of the pins to:
> - "default" on boot, resume and before performing an transfer.
> - "sleep" on suspend().
>
> This should make it possible to optimize energy usage for the pins
> both for the suspend/resume cycle.
>
> Signed-off-by: Wenyou Yang <[email protected]>
Thanks! Applied for next.
Kind regards
Uffe
> ---
> Hi Ulf,
>
> Thanks a lot.
>
> According to your advice, remove pinctrl_pm_select_default_state(&pdev->dev) from the _probe function.
>
> Best Regards,
> Wenyou Yang
>
> drivers/mmc/host/atmel-mci.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
> index 4df1599..a7b59ba 100644
> --- a/drivers/mmc/host/atmel-mci.c
> +++ b/drivers/mmc/host/atmel-mci.c
> @@ -39,6 +39,7 @@
> #include <linux/atmel_pdc.h>
> #include <linux/pm.h>
> #include <linux/pm_runtime.h>
> +#include <linux/pinctrl/consumer.h>
>
> #include <asm/cacheflush.h>
> #include <asm/io.h>
> @@ -2568,6 +2569,8 @@ static int atmci_runtime_suspend(struct device *dev)
>
> clk_disable_unprepare(host->mck);
>
> + pinctrl_pm_select_sleep_state(dev);
> +
> return 0;
> }
>
> @@ -2575,6 +2578,8 @@ static int atmci_runtime_resume(struct device *dev)
> {
> struct atmel_mci *host = dev_get_drvdata(dev);
>
> + pinctrl_pm_select_default_state(dev);
> +
> return clk_prepare_enable(host->mck);
> }
> #endif
> --
> 1.7.9.5
>