Turning on CONFIG_DMA_API_DEBUG_SG results in the following warning:
DMA-API: mmci-pl18x 48220000.mmc: cacheline tracking EEXIST,
overlapping mappings aren't supported
WARNING: CPU: 1 PID: 51 at kernel/dma/debug.c:568
add_dma_entry+0x234/0x2f4
Modules linked in:
CPU: 1 PID: 51 Comm: kworker/1:2 Not tainted 6.1.28 #1
Hardware name: STMicroelectronics STM32MP257F-EV1 Evaluation Board (DT)
Workqueue: events_freezable mmc_rescan
Call trace:
add_dma_entry+0x234/0x2f4
debug_dma_map_sg+0x198/0x350
__dma_map_sg_attrs+0xa0/0x110
dma_map_sg_attrs+0x10/0x2c
sdmmc_idma_prep_data+0x80/0xc0
mmci_prep_data+0x38/0x84
mmci_start_data+0x108/0x2dc
mmci_request+0xe4/0x190
__mmc_start_request+0x68/0x140
mmc_start_request+0x94/0xc0
mmc_wait_for_req+0x70/0x100
mmc_send_tuning+0x108/0x1ac
sdmmc_execute_tuning+0x14c/0x210
mmc_execute_tuning+0x48/0xec
mmc_sd_init_uhs_card.part.0+0x208/0x464
mmc_sd_init_card+0x318/0x89c
mmc_attach_sd+0xe4/0x180
mmc_rescan+0x244/0x320
DMA API debug brings to light leaking dma-mappings as dma_map_sg and
dma_unmap_sg are not correctly balanced.
If an error occurs in mmci_cmd_irq function, only mmci_dma_error
function is called and as this API is not managed on stm32 variant,
dma_unmap_sg is never called in this error path.
Signed-off-by: Christophe Kerello <[email protected]>
---
drivers/mmc/host/mmci_stm32_sdmmc.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/mmc/host/mmci_stm32_sdmmc.c b/drivers/mmc/host/mmci_stm32_sdmmc.c
index 35067e1e6cd8..f5da7f9baa52 100644
--- a/drivers/mmc/host/mmci_stm32_sdmmc.c
+++ b/drivers/mmc/host/mmci_stm32_sdmmc.c
@@ -225,6 +225,8 @@ static int sdmmc_idma_start(struct mmci_host *host, unsigned int *datactrl)
struct scatterlist *sg;
int i;
+ host->dma_in_progress = true;
+
if (!host->variant->dma_lli || data->sg_len == 1 ||
idma->use_bounce_buffer) {
u32 dma_addr;
@@ -263,9 +265,30 @@ static int sdmmc_idma_start(struct mmci_host *host, unsigned int *datactrl)
return 0;
}
+static void sdmmc_idma_error(struct mmci_host *host)
+{
+ struct mmc_data *data = host->data;
+ struct sdmmc_idma *idma = host->dma_priv;
+
+ if (!dma_inprogress(host))
+ return;
+
+ writel_relaxed(0, host->base + MMCI_STM32_IDMACTRLR);
+ host->dma_in_progress = false;
+ data->host_cookie = 0;
+
+ if (!idma->use_bounce_buffer)
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+ mmc_get_dma_dir(data));
+}
+
static void sdmmc_idma_finalize(struct mmci_host *host, struct mmc_data *data)
{
+ if (!dma_inprogress(host))
+ return;
+
writel_relaxed(0, host->base + MMCI_STM32_IDMACTRLR);
+ host->dma_in_progress = false;
if (!data->host_cookie)
sdmmc_idma_unprep_data(host, data, 0);
@@ -676,6 +699,7 @@ static struct mmci_host_ops sdmmc_variant_ops = {
.dma_setup = sdmmc_idma_setup,
.dma_start = sdmmc_idma_start,
.dma_finalize = sdmmc_idma_finalize,
+ .dma_error = sdmmc_idma_error,
.set_clkreg = mmci_sdmmc_set_clkreg,
.set_pwrreg = mmci_sdmmc_set_pwrreg,
.busy_complete = sdmmc_busy_complete,
--
2.25.1
On Wed, 7 Feb 2024 at 15:40, Christophe Kerello
<[email protected]> wrote:
>
> Turning on CONFIG_DMA_API_DEBUG_SG results in the following warning:
>
> DMA-API: mmci-pl18x 48220000.mmc: cacheline tracking EEXIST,
> overlapping mappings aren't supported
> WARNING: CPU: 1 PID: 51 at kernel/dma/debug.c:568
> add_dma_entry+0x234/0x2f4
> Modules linked in:
> CPU: 1 PID: 51 Comm: kworker/1:2 Not tainted 6.1.28 #1
> Hardware name: STMicroelectronics STM32MP257F-EV1 Evaluation Board (DT)
> Workqueue: events_freezable mmc_rescan
> Call trace:
> add_dma_entry+0x234/0x2f4
> debug_dma_map_sg+0x198/0x350
> __dma_map_sg_attrs+0xa0/0x110
> dma_map_sg_attrs+0x10/0x2c
> sdmmc_idma_prep_data+0x80/0xc0
> mmci_prep_data+0x38/0x84
> mmci_start_data+0x108/0x2dc
> mmci_request+0xe4/0x190
> __mmc_start_request+0x68/0x140
> mmc_start_request+0x94/0xc0
> mmc_wait_for_req+0x70/0x100
> mmc_send_tuning+0x108/0x1ac
> sdmmc_execute_tuning+0x14c/0x210
> mmc_execute_tuning+0x48/0xec
> mmc_sd_init_uhs_card.part.0+0x208/0x464
> mmc_sd_init_card+0x318/0x89c
> mmc_attach_sd+0xe4/0x180
> mmc_rescan+0x244/0x320
>
> DMA API debug brings to light leaking dma-mappings as dma_map_sg and
> dma_unmap_sg are not correctly balanced.
>
> If an error occurs in mmci_cmd_irq function, only mmci_dma_error
> function is called and as this API is not managed on stm32 variant,
> dma_unmap_sg is never called in this error path.
>
> Signed-off-by: Christophe Kerello <[email protected]>
Applied for fixes and by adding a fixes- and stable-tag, thanks!
Kind regards
Uffe
> ---
> drivers/mmc/host/mmci_stm32_sdmmc.c | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/drivers/mmc/host/mmci_stm32_sdmmc.c b/drivers/mmc/host/mmci_stm32_sdmmc.c
> index 35067e1e6cd8..f5da7f9baa52 100644
> --- a/drivers/mmc/host/mmci_stm32_sdmmc.c
> +++ b/drivers/mmc/host/mmci_stm32_sdmmc.c
> @@ -225,6 +225,8 @@ static int sdmmc_idma_start(struct mmci_host *host, unsigned int *datactrl)
> struct scatterlist *sg;
> int i;
>
> + host->dma_in_progress = true;
> +
> if (!host->variant->dma_lli || data->sg_len == 1 ||
> idma->use_bounce_buffer) {
> u32 dma_addr;
> @@ -263,9 +265,30 @@ static int sdmmc_idma_start(struct mmci_host *host, unsigned int *datactrl)
> return 0;
> }
>
> +static void sdmmc_idma_error(struct mmci_host *host)
> +{
> + struct mmc_data *data = host->data;
> + struct sdmmc_idma *idma = host->dma_priv;
> +
> + if (!dma_inprogress(host))
> + return;
> +
> + writel_relaxed(0, host->base + MMCI_STM32_IDMACTRLR);
> + host->dma_in_progress = false;
> + data->host_cookie = 0;
> +
> + if (!idma->use_bounce_buffer)
> + dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
> + mmc_get_dma_dir(data));
> +}
> +
> static void sdmmc_idma_finalize(struct mmci_host *host, struct mmc_data *data)
> {
> + if (!dma_inprogress(host))
> + return;
> +
> writel_relaxed(0, host->base + MMCI_STM32_IDMACTRLR);
> + host->dma_in_progress = false;
>
> if (!data->host_cookie)
> sdmmc_idma_unprep_data(host, data, 0);
> @@ -676,6 +699,7 @@ static struct mmci_host_ops sdmmc_variant_ops = {
> .dma_setup = sdmmc_idma_setup,
> .dma_start = sdmmc_idma_start,
> .dma_finalize = sdmmc_idma_finalize,
> + .dma_error = sdmmc_idma_error,
> .set_clkreg = mmci_sdmmc_set_clkreg,
> .set_pwrreg = mmci_sdmmc_set_pwrreg,
> .busy_complete = sdmmc_busy_complete,
> --
> 2.25.1
>