On Tue, Apr 19, 2022 at 11:01 AM Greg KH <[email protected]> wrote:
>
> On Tue, Apr 19, 2022 at 10:35:17AM -0700, Luck, Tony wrote:
> > On Tue, Apr 19, 2022 at 07:20:54PM +0200, Greg KH wrote:
> > > > +/*
> > > > + * Note there is no need for a ->remove() call back. There isn't an
> > > > + * "unload" operation to remove the scan binary from the BIOS reserved
> > > > + * area. Also ".dev_groups" removal order will guarantee that any in
> > > > + * flight tests have completed.
> > > > + */
> > >
> > > So you are ok with the warning the kernel gives you when you unload the
> > > driver? That feels wrong :(
> >
> > What warning?
> >
> > # dmesg | tail -5
> > [ 38.084165] virbr0: port 1(virbr0-nic) entered listening state
> > [ 38.149621] virbr0: port 1(virbr0-nic) entered disabled state
> > [ 38.582054] broken atomic modeset userspace detected, disabling atomic
> > [ 43.703321] igc 0000:01:00.0 enp1s0: NIC Link is Up 2500 Mbps Full Duplex, Flow Control: RX
> > [ 43.703470] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
> > # modprobe intel_ifs
> > # ls /sys/devices/platform/intel_ifs.0/
> > details driver_override modalias reload status uevent
> > driver image_version power run_test subsystem
> > # rmmod intel_ifs
> > # dmesg | tail -5
> > [ 38.084165] virbr0: port 1(virbr0-nic) entered listening state
> > [ 38.149621] virbr0: port 1(virbr0-nic) entered disabled state
> > [ 38.582054] broken atomic modeset userspace detected, disabling atomic
> > [ 43.703321] igc 0000:01:00.0 enp1s0: NIC Link is Up 2500 Mbps Full Duplex, Flow Control: RX
> > [ 43.703470] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
> > #
>
> If there's no warning when the device goes away, why the crazy comment
> trying to justify the lack of a remove callback?
The comment clarifies the nuance that driver.dev_groups coordinates
flushing access sysfs ops users before ->remove() is called. It can
certainly be dropped.