From: Colin Ian King <[email protected]>
There are a couple of spelling mistakes in dm_error messages and
a comment. Fix these.
Signed-off-by: Colin Ian King <[email protected]>
---
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dsc.c | 2 +-
drivers/gpu/drm/amd/display/dc/dsc/dc_dsc.c | 8 ++++----
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dsc.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dsc.c
index be49fc7f4abe..ffd0014ec3b5 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dsc.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dsc.c
@@ -126,7 +126,7 @@ static void dsc2_get_enc_caps(struct dsc_enc_caps *dsc_enc_caps, int pixel_clock
/* Maximum total throughput with all the slices combined. This is different from how DP spec specifies it.
* Our decoder's total throughput in Pix/s is equal to DISPCLK. This is then shared between slices.
- * The value below is the absolute maximum value. The actual througput may be lower, but it'll always
+ * The value below is the absolute maximum value. The actual throughput may be lower, but it'll always
* be sufficient to process the input pixel rate fed into a single DSC engine.
*/
dsc_enc_caps->max_total_throughput_mps = DCN20_MAX_DISPLAY_CLOCK_Mhz;
diff --git a/drivers/gpu/drm/amd/display/dc/dsc/dc_dsc.c b/drivers/gpu/drm/amd/display/dc/dsc/dc_dsc.c
index 77e7a0f8a527..ef5f84a144c3 100644
--- a/drivers/gpu/drm/amd/display/dc/dsc/dc_dsc.c
+++ b/drivers/gpu/drm/amd/display/dc/dsc/dc_dsc.c
@@ -47,7 +47,7 @@ static bool dsc_buff_block_size_from_dpcd(int dpcd_buff_block_size, int *buff_bl
*buff_block_size = 64 * 1024;
break;
default: {
- dm_error("%s: DPCD DSC buffer size not recoginzed.\n", __func__);
+ dm_error("%s: DPCD DSC buffer size not recognized.\n", __func__);
return false;
}
}
@@ -63,7 +63,7 @@ static bool dsc_line_buff_depth_from_dpcd(int dpcd_line_buff_bit_depth, int *lin
else if (dpcd_line_buff_bit_depth == 8)
*line_buff_bit_depth = 8;
else {
- dm_error("%s: DPCD DSC buffer depth not recoginzed.\n", __func__);
+ dm_error("%s: DPCD DSC buffer depth not recognized.\n", __func__);
return false;
}
@@ -123,7 +123,7 @@ static bool dsc_throughput_from_dpcd(int dpcd_throughput, int *throughput)
*throughput = 1000;
break;
default: {
- dm_error("%s: DPCD DSC througput mode not recoginzed.\n", __func__);
+ dm_error("%s: DPCD DSC throughput mode not recognized.\n", __func__);
return false;
}
}
@@ -152,7 +152,7 @@ static bool dsc_bpp_increment_div_from_dpcd(int bpp_increment_dpcd, uint32_t *bp
*bpp_increment_div = 1;
break;
default: {
- dm_error("%s: DPCD DSC bits-per-pixel increment not recoginzed.\n", __func__);
+ dm_error("%s: DPCD DSC bits-per-pixel increment not recognized.\n", __func__);
return false;
}
}
--
2.20.1
Hi Colin,
On Wed, 26 Jun 2019 at 14:24, Colin King <[email protected]> wrote:
> There are a couple of spelling mistakes in dm_error messages and
> a comment. Fix these.
Whilst there, you might fix the '[next[' typo in the commit message.
Cheers,
Daniel
On 26/06/2019 14:25, Daniel Stone wrote:
> Hi Colin,
>
> On Wed, 26 Jun 2019 at 14:24, Colin King <[email protected]> wrote:
>> There are a couple of spelling mistakes in dm_error messages and
>> a comment. Fix these.
>
> Whilst there, you might fix the '[next[' typo in the commit message.
Ugh, fickle fingers. Maybe the upstream devs will fix that before
applying...
>
> Cheers,
> Daniel
>
On Wed, Jun 26, 2019 at 9:32 AM Colin Ian King <[email protected]> wrote:
>
> On 26/06/2019 14:25, Daniel Stone wrote:
> > Hi Colin,
> >
> > On Wed, 26 Jun 2019 at 14:24, Colin King <[email protected]> wrote:
> >> There are a couple of spelling mistakes in dm_error messages and
> >> a comment. Fix these.
> >
> > Whilst there, you might fix the '[next[' typo in the commit message.
>
> Ugh, fickle fingers. Maybe the upstream devs will fix that before
> applying...
Fixed up and applied.
Thanks,
Alex
>
>
> >
> > Cheers,
> > Daniel
> >
>
> _______________________________________________
> dri-devel mailing list
> [email protected]
> https://lists.freedesktop.org/mailman/listinfo/dri-devel