Signed-off-by: Alessio Igor Bogani <[email protected]>
---
v2 -> v3
Use appropriate git format-patch flag "-M" to detect renames
v1 -> v2
Address suggestion made by Scott Wood
Split the second patch in two
Don't remove "fsl,mpic" which it is required for 4-cell
interrupt specifiers
Remove pointless compatible in the dtsi
Use the right value for pcie clock-frequency (100 Mhz)
arch/powerpc/boot/dts/{ => fsl}/gef_ppc9a.dts | 0
arch/powerpc/boot/dts/{ => fsl}/gef_sbc310.dts | 0
arch/powerpc/boot/dts/{ => fsl}/gef_sbc610.dts | 0
arch/powerpc/boot/dts/{ => fsl}/mpc8641_hpcn.dts | 0
arch/powerpc/boot/dts/{ => fsl}/mpc8641_hpcn_36b.dts | 0
arch/powerpc/boot/dts/{ => fsl}/sbc8641d.dts | 0
6 files changed, 0 insertions(+), 0 deletions(-)
rename arch/powerpc/boot/dts/{ => fsl}/gef_ppc9a.dts (100%)
rename arch/powerpc/boot/dts/{ => fsl}/gef_sbc310.dts (100%)
rename arch/powerpc/boot/dts/{ => fsl}/gef_sbc610.dts (100%)
rename arch/powerpc/boot/dts/{ => fsl}/mpc8641_hpcn.dts (100%)
rename arch/powerpc/boot/dts/{ => fsl}/mpc8641_hpcn_36b.dts (100%)
rename arch/powerpc/boot/dts/{ => fsl}/sbc8641d.dts (100%)
diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts
similarity index 100%
rename from arch/powerpc/boot/dts/gef_ppc9a.dts
rename to arch/powerpc/boot/dts/fsl/gef_ppc9a.dts
diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/fsl/gef_sbc310.dts
similarity index 100%
rename from arch/powerpc/boot/dts/gef_sbc310.dts
rename to arch/powerpc/boot/dts/fsl/gef_sbc310.dts
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/fsl/gef_sbc610.dts
similarity index 100%
rename from arch/powerpc/boot/dts/gef_sbc610.dts
rename to arch/powerpc/boot/dts/fsl/gef_sbc610.dts
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts
similarity index 100%
rename from arch/powerpc/boot/dts/mpc8641_hpcn.dts
rename to arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts
similarity index 100%
rename from arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts
rename to arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts
diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/fsl/sbc8641d.dts
similarity index 100%
rename from arch/powerpc/boot/dts/sbc8641d.dts
rename to arch/powerpc/boot/dts/fsl/sbc8641d.dts
--
2.7.2
Avoid duplication of the interrupt-parent, migrate to 4 interrupt-cells
and set the right clock-frequency for pcie (100 Mhz).
Signed-off-by: Alessio Igor Bogani <[email protected]>
---
arch/powerpc/boot/dts/fsl/gef_ppc9a.dts | 73 ++++++++------------
arch/powerpc/boot/dts/fsl/gef_sbc310.dts | 79 ++++++++-------------
arch/powerpc/boot/dts/fsl/gef_sbc610.dts | 73 ++++++++------------
arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts | 95 ++++++++++----------------
arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts | 78 ++++++++-------------
arch/powerpc/boot/dts/fsl/sbc8641d.dts | 59 ++++++----------
6 files changed, 169 insertions(+), 288 deletions(-)
diff --git a/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts b/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts
index 83eb0fd..7e4487b 100644
--- a/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts
+++ b/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts
@@ -25,6 +25,7 @@
compatible = "gef,ppc9a";
#address-cells = <1>;
#size-cells = <1>;
+ interrupt-parent = <&mpic>;
aliases {
ethernet0 = &enet0;
@@ -72,8 +73,7 @@
#size-cells = <1>;
compatible = "fsl,mpc8641-localbus", "simple-bus";
reg = <0xfef05000 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <19 2 0 0>;
ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
1 0 0xe8000000 0x08000000 // Paged Flash 0
@@ -150,9 +150,7 @@
interrupt-controller;
compatible = "gef,ppc9a-fpga-pic", "gef,fpga-pic-1.00";
reg = <0x4 0x4000 0x20>;
- interrupts = <0x8
- 0x9>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x8 0x9 0 0>;
};
gef_gpio: gpio@7,14000 {
@@ -166,7 +164,6 @@
soc@fef00000 {
#address-cells = <1>;
#size-cells = <1>;
- #interrupt-cells = <2>;
device_type = "soc";
compatible = "fsl,mpc8641-soc", "simple-bus";
ranges = <0x0 0xfef00000 0x00100000>;
@@ -181,17 +178,15 @@
mcm@1000 {
compatible = "fsl,mpc8641-mcm", "fsl,mcm";
reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <17 2 0 0>;
};
- i2c1: i2c@3000 {
+ i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x2b 0x2 0 0>;
dfsrr;
hwmon@48 {
@@ -215,13 +210,12 @@
};
};
- i2c2: i2c@3100 {
+ i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x2b 0x2 0 0>;
dfsrr;
};
@@ -237,32 +231,28 @@
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
+ interrupts = <20 2 0 0>;
};
dma-channel@80 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
+ interrupts = <21 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
+ interrupts = <22 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
+ interrupts = <23 2 0 0>;
};
};
@@ -276,8 +266,7 @@
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "gmii";
@@ -315,8 +304,7 @@
reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "gmii";
@@ -340,8 +328,7 @@
compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <0x2a 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x2a 0x2 0 0>;
};
serial1: serial@4600 {
@@ -350,17 +337,16 @@
compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <0x1c 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x1c 0x2 0 0>;
};
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
- #interrupt-cells = <2>;
+ #interrupt-cells = <4>;
reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
+ compatible = "fsl,mpic", "chrp,open-pic";
device_type = "open-pic";
};
@@ -369,15 +355,14 @@
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
};
global-utilities@e0000 {
@@ -390,16 +375,14 @@
pci0: pcie@fef08000 {
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
- #interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xfef08000 0x1000>;
bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <0x18 0x2>;
+ clock-frequency = <100000000>;
+ interrupts = <0x18 0x2 0 0>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
diff --git a/arch/powerpc/boot/dts/fsl/gef_sbc310.dts b/arch/powerpc/boot/dts/fsl/gef_sbc310.dts
index d426dd3..1299011 100644
--- a/arch/powerpc/boot/dts/fsl/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/fsl/gef_sbc310.dts
@@ -25,6 +25,7 @@
compatible = "gef,sbc310";
#address-cells = <1>;
#size-cells = <1>;
+ interrupt-parent = <&mpic>;
aliases {
ethernet0 = &enet0;
@@ -73,8 +74,7 @@
#size-cells = <1>;
compatible = "fsl,mpc8641-localbus", "simple-bus";
reg = <0xfef05000 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <19 2 0 0>;
ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
1 0 0xe0000000 0x08000000 // Paged Flash 0
@@ -148,9 +148,7 @@
interrupt-controller;
compatible = "gef,sbc310-fpga-pic", "gef,fpga-pic";
reg = <0x4 0x4000 0x20>;
- interrupts = <0x8
- 0x9>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x8 0x9 0 0>;
};
gef_gpio: gpio@4,8000 {
@@ -164,7 +162,6 @@
soc@fef00000 {
#address-cells = <1>;
#size-cells = <1>;
- #interrupt-cells = <2>;
device_type = "soc";
compatible = "fsl,mpc8641-soc", "simple-bus";
ranges = <0x0 0xfef00000 0x00100000>;
@@ -179,17 +176,15 @@
mcm@1000 {
compatible = "fsl,mpc8641-mcm", "fsl,mcm";
reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <17 2 0 0>;
};
- i2c1: i2c@3000 {
+ i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x2b 0x2 0 0>;
dfsrr;
rtc@51 {
@@ -198,13 +193,12 @@
};
};
- i2c2: i2c@3100 {
+ i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x2b 0x2 0 0>;
dfsrr;
hwmon@48 {
@@ -235,32 +229,28 @@
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
+ interrupts = <20 2 0 0>;
};
dma-channel@80 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
+ interrupts = <21 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
+ interrupts = <22 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
+ interrupts = <23 2 0 0>;
};
};
@@ -274,8 +264,7 @@
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "gmii";
@@ -313,8 +302,7 @@
reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "gmii";
@@ -338,8 +326,7 @@
compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <0x2a 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x2a 0x2 0 0>;
};
serial1: serial@4600 {
@@ -348,17 +335,16 @@
compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <0x1c 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x1c 0x2 0 0>;
};
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
- #interrupt-cells = <2>;
+ #interrupt-cells = <4>;
reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
+ compatible = "fsl,mpic", "chrp,open-pic";
device_type = "open-pic";
};
@@ -367,15 +353,14 @@
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
};
global-utilities@e0000 {
@@ -388,16 +373,14 @@
pci0: pcie@fef08000 {
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
- #interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xfef08000 0x1000>;
bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <0x18 0x2>;
+ clock-frequency = <100000000>;
+ interrupts = <0x18 0x2 0 0>;
interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
interrupt-map = <
0x0000 0x0 0x0 0x1 &mpic 0x0 0x2
@@ -424,16 +407,14 @@
pci1: pcie@fef09000 {
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
- #interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xfef09000 0x1000>;
bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xfe400000 0x0 0x00400000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <0x19 0x2>;
+ clock-frequency = <100000000>;
+ interrupts = <0x19 0x2 0 0>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
0x0000 0x0 0x0 0x1 &mpic 0x4 0x2
diff --git a/arch/powerpc/boot/dts/fsl/gef_sbc610.dts b/arch/powerpc/boot/dts/fsl/gef_sbc610.dts
index 5db3399..3a1f438 100644
--- a/arch/powerpc/boot/dts/fsl/gef_sbc610.dts
+++ b/arch/powerpc/boot/dts/fsl/gef_sbc610.dts
@@ -25,6 +25,7 @@
compatible = "gef,sbc610";
#address-cells = <1>;
#size-cells = <1>;
+ interrupt-parent = <&mpic>;
aliases {
ethernet0 = &enet0;
@@ -72,8 +73,7 @@
#size-cells = <1>;
compatible = "fsl,mpc8641-localbus", "simple-bus";
reg = <0xfef05000 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <19 2 0 0>;
ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
1 0 0xe8000000 0x08000000 // Paged Flash 0
@@ -148,9 +148,7 @@
interrupt-controller;
compatible = "gef,fpga-pic";
reg = <0x4 0x4000 0x20>;
- interrupts = <0x8
- 0x9>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x8 0x9 0 0>;
};
gef_gpio: gpio@7,14000 {
@@ -164,7 +162,6 @@
soc@fef00000 {
#address-cells = <1>;
#size-cells = <1>;
- #interrupt-cells = <2>;
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xfef00000 0x00100000>;
@@ -179,17 +176,15 @@
mcm@1000 {
compatible = "fsl,mpc8641-mcm", "fsl,mcm";
reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <17 2 0 0>;
};
- i2c1: i2c@3000 {
+ i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x2b 0x2 0 0>;
dfsrr;
hwmon@48 {
@@ -213,13 +208,12 @@
};
};
- i2c2: i2c@3100 {
+ i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x2b 0x2 0 0>;
dfsrr;
};
@@ -235,32 +229,28 @@
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
+ interrupts = <20 2 0 0>;
};
dma-channel@80 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
+ interrupts = <21 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
+ interrupts = <22 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
+ interrupts = <23 2 0 0>;
};
};
@@ -274,8 +264,7 @@
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "gmii";
@@ -313,8 +302,7 @@
reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "gmii";
@@ -338,8 +326,7 @@
compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <0x2a 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x2a 0x2 0 0>;
};
serial1: serial@4600 {
@@ -348,17 +335,16 @@
compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <0x1c 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x1c 0x2 0 0>;
};
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
- #interrupt-cells = <2>;
+ #interrupt-cells = <4>;
reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
+ compatible = "fsl,mpic", "chrp,open-pic";
device_type = "open-pic";
};
@@ -367,15 +353,14 @@
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
};
global-utilities@e0000 {
@@ -388,16 +373,14 @@
pci0: pcie@fef08000 {
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
- #interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xfef08000 0x1000>;
bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <0x18 0x2>;
+ clock-frequency = <100000000>;
+ interrupts = <0x18 0x2 0 0>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
diff --git a/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts
index 1c03060..03ef3f7 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts
@@ -16,6 +16,7 @@
compatible = "fsl,mpc8641hpcn";
#address-cells = <1>;
#size-cells = <1>;
+ interrupt-parent = <&mpic>;
aliases {
ethernet0 = &enet0;
@@ -66,8 +67,7 @@
#size-cells = <1>;
compatible = "fsl,mpc8641-localbus", "simple-bus";
reg = <0xffe05000 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <19 2 0 0>;
ranges = <0 0 0xef800000 0x00800000
2 0 0xffdf8000 0x00008000
@@ -118,8 +118,7 @@
mcm@1000 {
compatible = "fsl,mpc8641-mcm", "fsl,mcm";
reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <17 2 0 0>;
};
i2c@3000 {
@@ -128,8 +127,7 @@
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <43 2 0 0>;
dfsrr;
};
@@ -139,8 +137,7 @@
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <43 2 0 0>;
dfsrr;
};
@@ -156,32 +153,28 @@
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
+ interrupts = <20 2 0 0>;
};
dma-channel@80 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
+ interrupts = <21 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
+ interrupts = <22 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
+ interrupts = <23 2 0 0>;
};
};
@@ -195,8 +188,7 @@
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
@@ -208,23 +200,19 @@
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
+ interrupts = <10 1 0 0>;
reg = <0>;
};
phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
+ interrupts = <10 1 0 0>;
reg = <1>;
};
phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
+ interrupts = <10 1 0 0>;
reg = <2>;
};
phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
+ interrupts = <10 1 0 0>;
reg = <3>;
};
tbi0: tbi-phy@11 {
@@ -244,8 +232,7 @@
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
@@ -273,8 +260,7 @@
reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
@@ -302,8 +288,7 @@
reg = <0x27000 0x1000>;
ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
@@ -327,8 +312,7 @@
compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <42 2 0 0>;
};
serial1: serial@4600 {
@@ -337,16 +321,15 @@
compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <28 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <28 2 0 0>;
};
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
- #interrupt-cells = <2>;
+ #interrupt-cells = <4>;
reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
+ compatible = "fsl,mpic", "chrp,open-pic";
device_type = "open-pic";
};
@@ -361,27 +344,27 @@
compatible = "fsl,srio-msg-unit";
reg = <0x0 0x100>;
interrupts = <
- 53 2 /* msg1_tx_irq */
- 54 2>;/* msg1_rx_irq */
+ 53 2 0 0 /* msg1_tx_irq */
+ 54 2 0 0>;/* msg1_rx_irq */
};
message-unit@100 {
compatible = "fsl,srio-msg-unit";
reg = <0x100 0x100>;
interrupts = <
- 55 2 /* msg2_tx_irq */
- 56 2>;/* msg2_rx_irq */
+ 55 2 0 0 /* msg2_tx_irq */
+ 56 2 0 0>;/* msg2_rx_irq */
};
doorbell-unit@400 {
compatible = "fsl,srio-dbell-unit";
reg = <0x400 0x80>;
interrupts = <
- 49 2 /* bell_outb_irq */
- 50 2>;/* bell_inb_irq */
+ 49 2 0 0 /* bell_outb_irq */
+ 50 2 0 0>;/* bell_inb_irq */
};
port-write-unit@4e0 {
compatible = "fsl,srio-port-write-unit";
reg = <0x4e0 0x20>;
- interrupts = <48 2>;
+ interrupts = <48 2 0 0>;
};
};
@@ -395,16 +378,14 @@
pci0: pcie@ffe08000 {
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
- #interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xffe08000 0x1000>;
bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xffc00000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
+ clock-frequency = <100000000>;
+ interrupts = <24 2 0 0>;
interrupt-map-mask = <0xff00 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 func 0 - PCI slot 1 */
@@ -545,7 +526,6 @@
0x0 0x00010000>;
isa@1e {
device_type = "isa";
- #interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
reg = <0xf000 0 0 0 0>;
@@ -562,8 +542,7 @@
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <9 2 0 0>;
};
i8042@60 {
@@ -571,8 +550,7 @@
#address-cells = <1>;
reg = <1 0x60 1 1 0x64 1>;
interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
+ interrupt-parent = <&i8259>;
keyboard@0 {
reg = <0>;
@@ -603,16 +581,14 @@
pci1: pcie@ffe09000 {
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
- #interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xffe09000 0x1000>;
bus-range = <0 0xff>;
ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xffc10000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
+ clock-frequency = <100000000>;
+ interrupts = <25 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
@@ -644,8 +620,7 @@
rapidio@ffec0000 {
reg = <0xffec0000 0x11000>;
compatible = "fsl,srio";
- interrupt-parent = <&mpic>;
- interrupts = <48 2>;
+ interrupts = <48 2 0 0>;
#address-cells = <2>;
#size-cells = <2>;
fsl,srio-rmu-handle = <&rmu>;
diff --git a/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts
index bb575e2..0a2c21f 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts
@@ -16,6 +16,7 @@
compatible = "fsl,mpc8641hpcn";
#address-cells = <2>;
#size-cells = <2>;
+ interrupt-parent = <&mpic>;
aliases {
ethernet0 = &enet0;
@@ -66,8 +67,7 @@
#size-cells = <1>;
compatible = "fsl,mpc8641-localbus", "simple-bus";
reg = <0x0f 0xffe05000 0x0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <19 2 0 0>;
ranges = <0 0 0xf 0xef800000 0x00800000
2 0 0xf 0xffdf8000 0x00008000
@@ -118,8 +118,7 @@
mcm@1000 {
compatible = "fsl,mpc8641-mcm", "fsl,mcm";
reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <17 2 0 0>;
};
i2c@3000 {
@@ -128,8 +127,7 @@
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <43 2 0 0>;
dfsrr;
};
@@ -139,8 +137,7 @@
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <43 2 0 0>;
dfsrr;
};
@@ -156,32 +153,28 @@
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
+ interrupts = <20 2 0 0>;
};
dma-channel@80 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
+ interrupts = <21 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
+ interrupts = <22 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
+ interrupts = <23 2 0 0>;
};
};
@@ -195,8 +188,7 @@
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
@@ -208,23 +200,19 @@
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
+ interrupts = <10 1 0 0>;
reg = <0>;
};
phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
+ interrupts = <10 1 0 0>;
reg = <1>;
};
phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
+ interrupts = <10 1 0 0>;
reg = <2>;
};
phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
+ interrupts = <10 1 0 0>;
reg = <3>;
};
tbi0: tbi-phy@11 {
@@ -244,8 +232,7 @@
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
@@ -273,8 +260,7 @@
reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
@@ -302,8 +288,7 @@
reg = <0x27000 0x1000>;
ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
@@ -327,8 +312,7 @@
compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <42 2 0 0>;
};
serial1: serial@4600 {
@@ -337,16 +321,15 @@
compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <28 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <28 2 0 0>;
};
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
- #interrupt-cells = <2>;
+ #interrupt-cells = <4>;
reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
+ compatible = "fsl,mpic", "chrp,open-pic";
device_type = "open-pic";
};
@@ -361,16 +344,14 @@
cell-index = <0>;
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
- #interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0x0f 0xffe08000 0x0 0x1000>;
bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0xe0000000 0x0c 0x00000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0x0f 0xffc00000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
+ clock-frequency = <100000000>;
+ interrupts = <24 2 0 0>;
interrupt-map-mask = <0xff00 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 func 0 - PCI slot 1 */
@@ -511,7 +492,6 @@
0x0 0x00010000>;
isa@1e {
device_type = "isa";
- #interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
reg = <0xf000 0 0 0 0>;
@@ -528,8 +508,7 @@
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <9 2 0 0>;
};
i8042@60 {
@@ -537,8 +516,7 @@
#address-cells = <1>;
reg = <1 0x60 1 1 0x64 1>;
interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
+ interrupt-parent = <&i8259>;
keyboard@0 {
reg = <0>;
@@ -570,16 +548,14 @@
cell-index = <1>;
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
- #interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0x0f 0xffe09000 0x0 0x1000>;
bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0xe0000000 0x0c 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0x0f 0xffc10000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
+ clock-frequency = <100000000>;
+ interrupts = <25 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
diff --git a/arch/powerpc/boot/dts/fsl/sbc8641d.dts b/arch/powerpc/boot/dts/fsl/sbc8641d.dts
index 68f0ed7..47c83a0 100644
--- a/arch/powerpc/boot/dts/fsl/sbc8641d.dts
+++ b/arch/powerpc/boot/dts/fsl/sbc8641d.dts
@@ -20,6 +20,7 @@
compatible = "wind,sbc8641";
#address-cells = <1>;
#size-cells = <1>;
+ interrupt-parent = <&mpic>;
aliases {
ethernet0 = &enet0;
@@ -70,8 +71,7 @@
#size-cells = <1>;
compatible = "fsl,mpc8641-localbus", "simple-bus";
reg = <0xf8005000 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <19 2 0 0>;
ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
1 0 0xf0000000 0x00010000 // 64KB EEPROM
@@ -137,8 +137,7 @@
mcm@1000 {
compatible = "fsl,mpc8641-mcm", "fsl,mcm";
reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <17 2 0 0>;
};
i2c@3000 {
@@ -147,8 +146,7 @@
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <43 2 0 0>;
dfsrr;
};
@@ -158,8 +156,7 @@
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <43 2 0 0>;
dfsrr;
};
@@ -175,32 +172,28 @@
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
+ interrupts = <20 2 0 0>;
};
dma-channel@80 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
+ interrupts = <21 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
+ interrupts = <22 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
+ interrupts = <23 2 0 0>;
};
};
@@ -214,8 +207,7 @@
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
@@ -255,8 +247,7 @@
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
@@ -284,8 +275,7 @@
reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
@@ -313,8 +303,7 @@
reg = <0x27000 0x1000>;
ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
@@ -338,8 +327,7 @@
compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <42 2 0 0>;
};
serial1: serial@4600 {
@@ -348,17 +336,16 @@
compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <28 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <28 2 0 0>;
};
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
- #interrupt-cells = <2>;
+ #interrupt-cells = <4>;
reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
+ compatible = "fsl,mpic", "chrp,open-pic";
device_type = "open-pic";
big-endian;
};
@@ -373,16 +360,14 @@
pci0: pcie@f8008000 {
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
- #interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xf8008000 0x1000>;
bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
+ clock-frequency = <100000000>;
+ interrupts = <24 2 0 0>;
interrupt-map-mask = <0xff00 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
@@ -411,16 +396,14 @@
pci1: pcie@f8009000 {
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
- #interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xf8009000 0x1000>;
bus-range = <0 0xff>;
ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
+ clock-frequency = <100000000>;
+ interrupts = <25 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
--
2.7.2
Signed-off-by: Alessio Igor Bogani <[email protected]>
---
arch/powerpc/boot/dts/fsl/gef_ppc9a.dts | 258 +++------------------
arch/powerpc/boot/dts/fsl/gef_sbc310.dts | 246 +++-----------------
arch/powerpc/boot/dts/fsl/gef_sbc610.dts | 258 +++------------------
arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts | 300 ++++---------------------
arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts | 298 ++++--------------------
arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi | 120 ++++++++++
arch/powerpc/boot/dts/fsl/mpc8641si-pre.dtsi | 58 +++++
arch/powerpc/boot/dts/fsl/sbc8641d.dts | 299 +++---------------------
8 files changed, 394 insertions(+), 1443 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/mpc8641si-pre.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts b/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts
index 7e4487b..0424fc2 100644
--- a/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts
+++ b/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts
@@ -18,62 +18,19 @@
* Compiled with dtc -I dts -O dtb -o gef_ppc9a.dtb gef_ppc9a.dts
*/
-/dts-v1/;
+/include/ "mpc8641si-pre.dtsi"
/ {
model = "GEF_PPC9A";
compatible = "gef,ppc9a";
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8641@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <32768>; // L1, 32K
- i-cache-size = <32768>; // L1, 32K
- timebase-frequency = <0>; // From uboot
- bus-frequency = <0>; // From uboot
- clock-frequency = <0>; // From uboot
- };
- PowerPC,8641@1 {
- device_type = "cpu";
- reg = <1>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <32768>; // L1, 32K
- i-cache-size = <32768>; // L1, 32K
- timebase-frequency = <0>; // From uboot
- bus-frequency = <0>; // From uboot
- clock-frequency = <0>; // From uboot
- };
- };
memory {
device_type = "memory";
reg = <0x0 0x40000000>; // set by uboot
};
- localbus@fef05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8641-localbus", "simple-bus";
+ lbc: localbus@fef05000 {
reg = <0xfef05000 0x1000>;
- interrupts = <19 2 0 0>;
ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
1 0 0xe8000000 0x08000000 // Paged Flash 0
@@ -161,34 +118,10 @@
};
};
- soc@fef00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,mpc8641-soc", "simple-bus";
+ soc: soc@fef00000 {
ranges = <0x0 0xfef00000 0x00100000>;
- bus-frequency = <33333333>;
-
- mcm-law@0 {
- compatible = "fsl,mcm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- mcm@1000 {
- compatible = "fsl,mpc8641-mcm", "fsl,mcm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2 0 0>;
- };
i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <0x2b 0x2 0 0>;
- dfsrr;
-
hwmon@48 {
compatible = "national,lm92";
reg = <0x48>;
@@ -210,192 +143,65 @@
};
};
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <0x2b 0x2 0 0>;
- dfsrr;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <20 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <21 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <22 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <23 2 0 0>;
- };
- };
-
enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "gmii";
+ };
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&gef_pic>;
- interrupts = <0x9 0x4>;
- reg = <1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&gef_pic>;
- interrupts = <0x8 0x4>;
- reg = <3>;
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x9 0x4>;
+ reg = <1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x8 0x4>;
+ reg = <3>;
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet1: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "gmii";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
};
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <0x2a 0x2 0 0>;
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <0x1c 0x2 0 0>;
+ enet2: ethernet@25000 {
+ status = "disabled";
};
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
+ mdio@25520 {
+ status = "disabled";
};
- msi@41600 {
- compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
+ enet3: ethernet@27000 {
+ status = "disabled";
};
- global-utilities@e0000 {
- compatible = "fsl,mpc8641-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
+ mdio@27520 {
+ status = "disabled";
};
};
pci0: pcie@fef08000 {
- compatible = "fsl,mpc8641-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xfef08000 0x1000>;
- bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
- clock-frequency = <100000000>;
- interrupts = <0x18 0x2 0 0>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0x0 0x80000000
0x02000000 0x0 0x80000000
0x0 0x40000000
@@ -406,3 +212,5 @@
};
};
};
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/gef_sbc310.dts b/arch/powerpc/boot/dts/fsl/gef_sbc310.dts
index 1299011..84b3d38 100644
--- a/arch/powerpc/boot/dts/fsl/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/fsl/gef_sbc310.dts
@@ -18,63 +18,23 @@
* Compiled with dtc -I dts -O dtb -o gef_sbc310.dtb gef_sbc310.dts
*/
-/dts-v1/;
+/include/ "mpc8641si-pre.dtsi"
/ {
model = "GEF_SBC310";
compatible = "gef,sbc310";
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&mpic>;
aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
pci1 = &pci1;
};
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8641@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <32768>; // L1, 32K
- i-cache-size = <32768>; // L1, 32K
- timebase-frequency = <0>; // From uboot
- bus-frequency = <0>; // From uboot
- clock-frequency = <0>; // From uboot
- };
- PowerPC,8641@1 {
- device_type = "cpu";
- reg = <1>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <32768>; // L1, 32K
- i-cache-size = <32768>; // L1, 32K
- timebase-frequency = <0>; // From uboot
- bus-frequency = <0>; // From uboot
- clock-frequency = <0>; // From uboot
- };
- };
-
memory {
device_type = "memory";
reg = <0x0 0x40000000>; // set by uboot
};
- localbus@fef05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8641-localbus", "simple-bus";
+ lbc: localbus@fef05000 {
reg = <0xfef05000 0x1000>;
- interrupts = <19 2 0 0>;
ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
1 0 0xe0000000 0x08000000 // Paged Flash 0
@@ -159,34 +119,10 @@
};
};
- soc@fef00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,mpc8641-soc", "simple-bus";
+ soc: soc@fef00000 {
ranges = <0x0 0xfef00000 0x00100000>;
- bus-frequency = <33333333>;
-
- mcm-law@0 {
- compatible = "fsl,mcm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- mcm@1000 {
- compatible = "fsl,mpc8641-mcm", "fsl,mcm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2 0 0>;
- };
i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <0x2b 0x2 0 0>;
- dfsrr;
-
rtc@51 {
compatible = "epson,rx8581";
reg = <0x00000051>;
@@ -194,13 +130,6 @@
};
i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <0x2b 0x2 0 0>;
- dfsrr;
-
hwmon@48 {
compatible = "national,lm92";
reg = <0x48>;
@@ -217,170 +146,63 @@
};
};
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <20 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <21 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <22 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <23 2 0 0>;
- };
- };
-
enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "gmii";
+ };
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&gef_pic>;
- interrupts = <0x9 0x4>;
- reg = <1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&gef_pic>;
- interrupts = <0x8 0x4>;
- reg = <3>;
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x9 0x4>;
+ reg = <1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x8 0x4>;
+ reg = <3>;
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet1: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "gmii";
+ };
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <0x2a 0x2 0 0>;
+ enet2: ethernet@25000 {
+ status = "disabled";
};
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <0x1c 0x2 0 0>;
+ mdio@25520 {
+ status = "disabled";
};
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
+ enet3: ethernet@27000 {
+ status = "disabled";
};
- msi@41600 {
- compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- global-utilities@e0000 {
- compatible = "fsl,mpc8641-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
+ mdio@27520 {
+ status = "disabled";
};
};
pci0: pcie@fef08000 {
- compatible = "fsl,mpc8641-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xfef08000 0x1000>;
- bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
- clock-frequency = <100000000>;
- interrupts = <0x18 0x2 0 0>;
interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
interrupt-map = <
0x0000 0x0 0x0 0x1 &mpic 0x0 0x2
@@ -390,10 +212,6 @@
>;
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0x0 0x80000000
0x02000000 0x0 0x80000000
0x0 0x40000000
@@ -438,3 +256,5 @@
};
};
};
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/gef_sbc610.dts b/arch/powerpc/boot/dts/fsl/gef_sbc610.dts
index 3a1f438..974446a 100644
--- a/arch/powerpc/boot/dts/fsl/gef_sbc610.dts
+++ b/arch/powerpc/boot/dts/fsl/gef_sbc610.dts
@@ -18,62 +18,19 @@
* Compiled with dtc -I dts -O dtb -o gef_sbc610.dtb gef_sbc610.dts
*/
-/dts-v1/;
+/include/ "mpc8641si-pre.dtsi"
/ {
model = "GEF_SBC610";
compatible = "gef,sbc610";
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8641@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <32768>; // L1, 32K
- i-cache-size = <32768>; // L1, 32K
- timebase-frequency = <0>; // From uboot
- bus-frequency = <0>; // From uboot
- clock-frequency = <0>; // From uboot
- };
- PowerPC,8641@1 {
- device_type = "cpu";
- reg = <1>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <32768>; // L1, 32K
- i-cache-size = <32768>; // L1, 32K
- timebase-frequency = <0>; // From uboot
- bus-frequency = <0>; // From uboot
- clock-frequency = <0>; // From uboot
- };
- };
memory {
device_type = "memory";
reg = <0x0 0x40000000>; // set by uboot
};
- localbus@fef05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8641-localbus", "simple-bus";
+ lbc: localbus@fef05000 {
reg = <0xfef05000 0x1000>;
- interrupts = <19 2 0 0>;
ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
1 0 0xe8000000 0x08000000 // Paged Flash 0
@@ -159,34 +116,10 @@
};
};
- soc@fef00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
+ soc: soc@fef00000 {
ranges = <0x0 0xfef00000 0x00100000>;
- bus-frequency = <33333333>;
-
- mcm-law@0 {
- compatible = "fsl,mcm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- mcm@1000 {
- compatible = "fsl,mpc8641-mcm", "fsl,mcm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2 0 0>;
- };
i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <0x2b 0x2 0 0>;
- dfsrr;
-
hwmon@48 {
compatible = "national,lm92";
reg = <0x48>;
@@ -208,192 +141,65 @@
};
};
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <0x2b 0x2 0 0>;
- dfsrr;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <20 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <21 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <22 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <23 2 0 0>;
- };
- };
-
enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "gmii";
+ };
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&gef_pic>;
- interrupts = <0x9 0x4>;
- reg = <1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&gef_pic>;
- interrupts = <0x8 0x4>;
- reg = <3>;
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x9 0x4>;
+ reg = <1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x8 0x4>;
+ reg = <3>;
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet1: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "gmii";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
};
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <0x2a 0x2 0 0>;
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <0x1c 0x2 0 0>;
+ enet2: ethernet@25000 {
+ status = "disabled";
};
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
+ mdio@25520 {
+ status = "disabled";
};
- msi@41600 {
- compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
+ enet3: ethernet@27000 {
+ status = "disabled";
};
- global-utilities@e0000 {
- compatible = "fsl,mpc8641-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
+ mdio@27520 {
+ status = "disabled";
};
};
pci0: pcie@fef08000 {
- compatible = "fsl,mpc8641-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xfef08000 0x1000>;
- bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
- clock-frequency = <100000000>;
- interrupts = <0x18 0x2 0 0>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0x0 0x80000000
0x02000000 0x0 0x80000000
0x0 0x40000000
@@ -404,3 +210,5 @@
};
};
};
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts
index 03ef3f7..554001f 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts
@@ -9,65 +9,23 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc8641si-pre.dtsi"
/ {
model = "MPC8641HPCN";
compatible = "fsl,mpc8641hpcn";
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&mpic>;
aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
pci1 = &pci1;
};
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8641@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <32>;
- i-cache-line-size = <32>;
- d-cache-size = <32768>; // L1
- i-cache-size = <32768>; // L1
- timebase-frequency = <0>; // From uboot
- bus-frequency = <0>; // From uboot
- clock-frequency = <0>; // From uboot
- };
- PowerPC,8641@1 {
- device_type = "cpu";
- reg = <1>;
- d-cache-line-size = <32>;
- i-cache-line-size = <32>;
- d-cache-size = <32768>;
- i-cache-size = <32768>;
- timebase-frequency = <0>; // From uboot
- bus-frequency = <0>; // From uboot
- clock-frequency = <0>; // From uboot
- };
- };
-
memory {
device_type = "memory";
reg = <0x00000000 0x40000000>; // 1G at 0x0
};
- localbus@ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8641-localbus", "simple-bus";
+ lbc: localbus@ffe05000 {
reg = <0xffe05000 0x1000>;
- interrupts = <19 2 0 0>;
ranges = <0 0 0xef800000 0x00800000
2 0 0xffdf8000 0x00008000
@@ -101,236 +59,75 @@
};
};
- soc8641@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
+ soc: soc8641@ffe00000 {
ranges = <0x00000000 0xffe00000 0x00100000>;
- bus-frequency = <0>;
-
- mcm-law@0 {
- compatible = "fsl,mcm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- mcm@1000 {
- compatible = "fsl,mpc8641-mcm", "fsl,mcm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2 0 0>;
- };
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
};
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <20 2 0 0>;
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <10 1 0 0>;
+ reg = <0>;
};
- dma-channel@80 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <21 2 0 0>;
+ phy1: ethernet-phy@1 {
+ interrupts = <10 1 0 0>;
+ reg = <1>;
};
- dma-channel@100 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <22 2 0 0>;
+ phy2: ethernet-phy@2 {
+ interrupts = <10 1 0 0>;
+ reg = <2>;
};
- dma-channel@180 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <23 2 0 0>;
+ phy3: ethernet-phy@3 {
+ interrupts = <10 1 0 0>;
+ reg = <3>;
};
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupts = <10 1 0 0>;
- reg = <0>;
- };
- phy1: ethernet-phy@1 {
- interrupts = <10 1 0 0>;
- reg = <1>;
- };
- phy2: ethernet-phy@2 {
- interrupts = <10 1 0 0>;
- reg = <2>;
- };
- phy3: ethernet-phy@3 {
- interrupts = <10 1 0 0>;
- reg = <3>;
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
+ };
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
+ };
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet3: ethernet@27000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <3>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- ranges = <0x0 0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
};
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <28 2 0 0>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
+ mdio@27520 {
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
rmu: rmu@d3000 {
@@ -358,7 +155,7 @@
compatible = "fsl,srio-dbell-unit";
reg = <0x400 0x80>;
interrupts = <
- 49 2 0 0 /* bell_outb_irq */
+ 49 2 0 0 /* bell_outb_irq */
50 2 0 0>;/* bell_inb_irq */
};
port-write-unit@4e0 {
@@ -367,25 +164,12 @@
interrupts = <48 2 0 0>;
};
};
-
- global-utilities@e0000 {
- compatible = "fsl,mpc8641-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
};
pci0: pcie@ffe08000 {
- compatible = "fsl,mpc8641-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xffe08000 0x1000>;
- bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xffc00000 0x0 0x00010000>;
- clock-frequency = <100000000>;
- interrupts = <24 2 0 0>;
interrupt-map-mask = <0xff00 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 func 0 - PCI slot 1 */
@@ -503,10 +287,6 @@
>;
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0x0 0x80000000
0x02000000 0x0 0x80000000
0x0 0x20000000
@@ -636,3 +416,5 @@
*/
};
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts
index 0a2c21f..fec5867 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts
@@ -9,65 +9,25 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc8641si-pre.dtsi"
/ {
model = "MPC8641HPCN";
compatible = "fsl,mpc8641hpcn";
#address-cells = <2>;
#size-cells = <2>;
- interrupt-parent = <&mpic>;
aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
pci1 = &pci1;
};
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8641@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <32768>; // L1, 32K
- i-cache-size = <32768>; // L1, 32K
- timebase-frequency = <0>; // 33 MHz, from uboot
- bus-frequency = <0>; // From uboot
- clock-frequency = <0>; // From uboot
- };
- PowerPC,8641@1 {
- device_type = "cpu";
- reg = <1>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <32768>; // L1, 32K
- i-cache-size = <32768>; // L1, 32K
- timebase-frequency = <0>; // 33 MHz, from uboot
- bus-frequency = <0>; // From uboot
- clock-frequency = <0>; // From uboot
- };
- };
-
memory {
device_type = "memory";
reg = <0x0 0x00000000 0x0 0x40000000>; // 1G at 0x0
};
- localbus@fffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8641-localbus", "simple-bus";
+ lbc: localbus@fffe05000 {
reg = <0x0f 0xffe05000 0x0 0x1000>;
- interrupts = <19 2 0 0>;
ranges = <0 0 0xf 0xef800000 0x00800000
2 0 0xf 0xffdf8000 0x00008000
@@ -101,257 +61,82 @@
};
};
- soc8641@fffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
+ soc: soc8641@fffe00000 {
ranges = <0x00000000 0x0f 0xffe00000 0x00100000>;
- bus-frequency = <0>;
- mcm-law@0 {
- compatible = "fsl,mcm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- mcm@1000 {
- compatible = "fsl,mpc8641-mcm", "fsl,mcm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2 0 0>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
};
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <20 2 0 0>;
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <10 1 0 0>;
+ reg = <0>;
};
- dma-channel@80 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <21 2 0 0>;
+ phy1: ethernet-phy@1 {
+ interrupts = <10 1 0 0>;
+ reg = <1>;
};
- dma-channel@100 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <22 2 0 0>;
+ phy2: ethernet-phy@2 {
+ interrupts = <10 1 0 0>;
+ reg = <2>;
};
- dma-channel@180 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <23 2 0 0>;
+ phy3: ethernet-phy@3 {
+ interrupts = <10 1 0 0>;
+ reg = <3>;
};
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupts = <10 1 0 0>;
- reg = <0>;
- };
- phy1: ethernet-phy@1 {
- interrupts = <10 1 0 0>;
- reg = <1>;
- };
- phy2: ethernet-phy@2 {
- interrupts = <10 1 0 0>;
- reg = <2>;
- };
- phy3: ethernet-phy@3 {
- interrupts = <10 1 0 0>;
- reg = <3>;
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
+ };
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
+ };
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet3: ethernet@27000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <3>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- ranges = <0x0 0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
};
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <28 2 0 0>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- };
-
- global-utilities@e0000 {
- compatible = "fsl,mpc8641-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
+ mdio@27520 {
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
};
pci0: pcie@fffe08000 {
- cell-index = <0>;
- compatible = "fsl,mpc8641-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0x0f 0xffe08000 0x0 0x1000>;
- bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0xe0000000 0x0c 0x00000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0x0f 0xffc00000 0x0 0x00010000>;
- clock-frequency = <100000000>;
- interrupts = <24 2 0 0>;
interrupt-map-mask = <0xff00 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 func 0 - PCI slot 1 */
@@ -469,10 +254,6 @@
>;
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0x0 0xe0000000
0x02000000 0x0 0xe0000000
0x0 0x20000000
@@ -545,7 +326,6 @@
};
pci1: pcie@fffe09000 {
- cell-index = <1>;
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
#size-cells = <2>;
@@ -579,3 +359,5 @@
};
};
};
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi
new file mode 100644
index 0000000..70889d8
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi
@@ -0,0 +1,120 @@
+/*
+ * MPC8641 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8641-localbus", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8641-soc", "simple-bus";
+ bus-frequency = <0>;
+
+ mcm-law@0 {
+ compatible = "fsl,mcm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ mcm@1000 {
+ compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+ serial@4600 {
+ interrupts = <28 2 0 0>;
+ };
+/include/ "pq3-dma-0.dtsi"
+ dma@21300 {
+ compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+ };
+ dma-channel@0 {
+ compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel";
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel";
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel";
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel";
+ };
+
+/include/ "pq3-etsec1-0.dtsi"
+ ethernet@24000 {
+ model = "TSEC";
+ };
+/include/ "pq3-etsec1-1.dtsi"
+ ethernet@25000 {
+ model = "TSEC";
+ };
+/include/ "pq3-etsec1-2.dtsi"
+ ethernet@26000 {
+ model = "TSEC";
+ };
+/include/ "pq3-etsec1-3.dtsi"
+ ethernet@27000 {
+ model = "TSEC";
+ };
+
+/include/ "qoriq-mpic.dtsi"
+ msi@41600 {
+ compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
+ };
+ msi@41800 {
+ compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
+ };
+ msi@41a00 {
+ compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8641-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
+
+&pci0 {
+ compatible = "fsl,mpc8641-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <100000000>;
+ interrupts = <24 2 0 0>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+
+ interrupt-map = <
+ 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1
+ >;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8641si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8641si-pre.dtsi
new file mode 100644
index 0000000..9e03328
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8641si-pre.dtsi
@@ -0,0 +1,58 @@
+/*
+ * MPC8641 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8641@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-size = <32768>;
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ };
+
+ PowerPC,8641@1 {
+ device_type = "cpu";
+ reg = <1>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-size = <32768>;
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/sbc8641d.dts b/arch/powerpc/boot/dts/fsl/sbc8641d.dts
index 47c83a0..0a9733c 100644
--- a/arch/powerpc/boot/dts/fsl/sbc8641d.dts
+++ b/arch/powerpc/boot/dts/fsl/sbc8641d.dts
@@ -13,65 +13,23 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc8641si-pre.dtsi"
/ {
model = "SBC8641D";
compatible = "wind,sbc8641";
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&mpic>;
aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
pci1 = &pci1;
};
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8641@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <32>;
- i-cache-line-size = <32>;
- d-cache-size = <32768>; // L1
- i-cache-size = <32768>; // L1
- timebase-frequency = <0>; // From uboot
- bus-frequency = <0>; // From uboot
- clock-frequency = <0>; // From uboot
- };
- PowerPC,8641@1 {
- device_type = "cpu";
- reg = <1>;
- d-cache-line-size = <32>;
- i-cache-line-size = <32>;
- d-cache-size = <32768>;
- i-cache-size = <32768>;
- timebase-frequency = <0>; // From uboot
- bus-frequency = <0>; // From uboot
- clock-frequency = <0>; // From uboot
- };
- };
-
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>; // 512M at 0x0
};
- localbus@f8005000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8641-localbus", "simple-bus";
+ lbc: localbus@f8005000 {
reg = <0xf8005000 0x1000>;
- interrupts = <19 2 0 0>;
ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
1 0 0xf0000000 0x00010000 // 64KB EEPROM
@@ -120,268 +78,81 @@
};
};
- soc@f8000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
+ soc: soc@f8000000 {
ranges = <0x00000000 0xf8000000 0x00100000>;
- bus-frequency = <0>;
-
- mcm-law@0 {
- compatible = "fsl,mcm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- mcm@1000 {
- compatible = "fsl,mpc8641-mcm", "fsl,mcm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2 0 0>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
- };
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
};
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <20 2 0 0>;
+ mdio@24520 {
+ phy0: ethernet-phy@1f {
+ reg = <0x1f>;
};
- dma-channel@80 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <21 2 0 0>;
+ phy1: ethernet-phy@0 {
+ reg = <0>;
};
- dma-channel@100 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <22 2 0 0>;
+ phy2: ethernet-phy@1 {
+ reg = <1>;
};
- dma-channel@180 {
- compatible = "fsl,mpc8641-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <23 2 0 0>;
+ phy3: ethernet-phy@2 {
+ reg = <2>;
};
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@1f {
- reg = <0x1f>;
- };
- phy1: ethernet-phy@0 {
- reg = <0>;
- };
- phy2: ethernet-phy@1 {
- reg = <1>;
- };
- phy3: ethernet-phy@2 {
- reg = <2>;
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
+ };
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
+ };
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet3: ethernet@27000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <3>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- ranges = <0x0 0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <28 2 0 0>;
};
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- big-endian;
- };
-
- global-utilities@e0000 {
- compatible = "fsl,mpc8641-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
+ mdio@27520 {
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
};
pci0: pcie@f8008000 {
- compatible = "fsl,mpc8641-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf8008000 0x1000>;
- bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
- clock-frequency = <100000000>;
- interrupts = <24 2 0 0>;
interrupt-map-mask = <0xff00 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0x0000 0 0 1 &mpic 0 1
- 0x0000 0 0 2 &mpic 1 1
- 0x0000 0 0 3 &mpic 2 1
- 0x0000 0 0 4 &mpic 3 1
- >;
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0x0 0x80000000
0x02000000 0x0 0x80000000
0x0 0x20000000
@@ -428,3 +199,5 @@
};
};
};
+
+/include/ "mpc8641si-post.dtsi"
--
2.7.2
On Wed, 2016-03-02 at 13:16 +0100, Alessio Igor Bogani wrote:
> Signed-off-by: Alessio Igor Bogani <[email protected]>
> ---
> v2 -> v3
> Use appropriate git format-patch flag "-M" to detect renames
>
> v1 -> v2
> Address suggestion made by Scott Wood
> Split the second patch in two
> Don't remove "fsl,mpic" which it is required for 4-cell
> interrupt specifiers
> Remove pointless compatible in the dtsi
> Use the right value for pcie clock-frequency (100 Mhz)
>
> arch/powerpc/boot/dts/{ => fsl}/gef_ppc9a.dts | 0
> arch/powerpc/boot/dts/{ => fsl}/gef_sbc310.dts | 0
> arch/powerpc/boot/dts/{ => fsl}/gef_sbc610.dts | 0
> arch/powerpc/boot/dts/{ => fsl}/mpc8641_hpcn.dts | 0
> arch/powerpc/boot/dts/{ => fsl}/mpc8641_hpcn_36b.dts | 0
> arch/powerpc/boot/dts/{ => fsl}/sbc8641d.dts | 0
> 6 files changed, 0 insertions(+), 0 deletions(-)
> rename arch/powerpc/boot/dts/{ => fsl}/gef_ppc9a.dts (100%)
> rename arch/powerpc/boot/dts/{ => fsl}/gef_sbc310.dts (100%)
> rename arch/powerpc/boot/dts/{ => fsl}/gef_sbc610.dts (100%)
> rename arch/powerpc/boot/dts/{ => fsl}/mpc8641_hpcn.dts (100%)
> rename arch/powerpc/boot/dts/{ => fsl}/mpc8641_hpcn_36b.dts (100%)
> rename arch/powerpc/boot/dts/{ => fsl}/sbc8641d.dts (100%)
This patchset looks OK -- were you going to send a non-RFC version? Or do you
want me to apply this one?
-Scott
Scott,
On 3 March 2016 at 21:47, Scott Wood <[email protected]> wrote:
> On Wed, 2016-03-02 at 13:16 +0100, Alessio Igor Bogani wrote:
>> Signed-off-by: Alessio Igor Bogani <[email protected]>
>> ---
>> v2 -> v3
>> Use appropriate git format-patch flag "-M" to detect renames
>>
>> v1 -> v2
>> Address suggestion made by Scott Wood
>> Split the second patch in two
>> Don't remove "fsl,mpic" which it is required for 4-cell
>> interrupt specifiers
>> Remove pointless compatible in the dtsi
>> Use the right value for pcie clock-frequency (100 Mhz)
>
> This patchset looks OK -- were you going to send a non-RFC version? Or do you
> want me to apply this one?
I have just sent you a non-RFC version. Thanks!
Ciao,
Alessio