Add a generic AX88179A entry for the 0b95:1790 device id:
kernel: usb 2-1: New USB device found, idVendor=0b95, idProduct=1790, bcdDevice= 2.00
kernel: usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
kernel: usb 2-1: Product: AX88179A
kernel: usb 2-1: Manufacturer: ASIX
kernel: usb 2-1: SerialNumber: 00D24DC0
kernel: asix 2-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0000: -32
kernel: asix: probe of 2-1:1.0 failed with error -32
kernel: ax88179_178a 2-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0040: -32
kernel: ax88179_178a 2-1:1.0 eth1: register 'ax88179_178a' at usb-0000:01:00.0-1, ASIX AX88179 USB 3.0 Gigabit Ethernet, 20:7b:d2:d2:4d:c0
Signed-off-by: Christian Hewitt <[email protected]>
---
The change is tested by a LibreELEC (distro) user who reports the NIC to be working
fine (and logs support this) but the "Failed to read reg index 0x0000: -32" errors
suggest ax88178_info might not be the correct choice. I'm not a serious coder so I
need to "ask the audience" for suggestions on what more might be needed?
drivers/net/usb/asix_devices.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index f7cff58fe044..9a7b1136cd98 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -1506,6 +1506,10 @@ static const struct usb_device_id products [] = {
// ASIX AX88178 10/100/1000
USB_DEVICE (0x0b95, 0x1780),
.driver_info = (unsigned long) &ax88178_info,
+}, {
+ // ASIX AX88179A 10/100/1000
+ USB_DEVICE(0x0b95, 0x1790),
+ .driver_info = (unsigned long)&ax88178_info,
}, {
// Logitec LAN-GTJ/U2A
USB_DEVICE (0x0789, 0x0160),
--
2.34.1
On Mon, Feb 05, 2024 at 10:40:48AM +0000, Christian Hewitt wrote:
> Add a generic AX88179A entry for the 0b95:1790 device id:
>
> kernel: usb 2-1: New USB device found, idVendor=0b95, idProduct=1790, bcdDevice= 2.00
> kernel: usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> kernel: usb 2-1: Product: AX88179A
> kernel: usb 2-1: Manufacturer: ASIX
> kernel: usb 2-1: SerialNumber: 00D24DC0
> kernel: asix 2-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0000: -32
> kernel: asix: probe of 2-1:1.0 failed with error -32
> kernel: ax88179_178a 2-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0040: -32
> kernel: ax88179_178a 2-1:1.0 eth1: register 'ax88179_178a' at usb-0000:01:00.0-1, ASIX AX88179 USB 3.0 Gigabit Ethernet, 20:7b:d2:d2:4d:c0
>
> Signed-off-by: Christian Hewitt <[email protected]>
> ---
> The change is tested by a LibreELEC (distro) user who reports the NIC to be working
> fine (and logs support this) but the "Failed to read reg index 0x0000: -32" errors
> suggest ax88178_info might not be the correct choice. I'm not a serious coder so I
> need to "ask the audience" for suggestions on what more might be needed?
I would probably start by determining what ax88179_read_cmd() is
causing that print. Maybe print in addition cmd, and value. Or add a
WARN() so you get a stack trace.
It might be possible to figure it out by just looking at the code. How
many places actually pass index=0?
Andrew
On Mon, Feb 5, 2024 at 2:40 AM Christian Hewitt
<[email protected]> wrote:
>
> Add a generic AX88179A entry for the 0b95:1790 device id:
>
> kernel: usb 2-1: New USB device found, idVendor=0b95, idProduct=1790, bcdDevice= 2.00
> kernel: usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> kernel: usb 2-1: Product: AX88179A
> kernel: usb 2-1: Manufacturer: ASIX
> kernel: usb 2-1: SerialNumber: 00D24DC0
> kernel: asix 2-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0000: -32
> kernel: asix: probe of 2-1:1.0 failed with error -32
> kernel: ax88179_178a 2-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0040: -32
> kernel: ax88179_178a 2-1:1.0 eth1: register 'ax88179_178a' at usb-0000:01:00.0-1, ASIX AX88179 USB 3.0 Gigabit Ethernet, 20:7b:d2:d2:4d:c0
>
> Signed-off-by: Christian Hewitt <[email protected]>
> ---
> The change is tested by a LibreELEC (distro) user who reports the NIC to be working
> fine (and logs support this) but the "Failed to read reg index 0x0000: -32" errors
> suggest ax88178_info might not be the correct choice. I'm not a serious coder so I
> need to "ask the audience" for suggestions on what more might be needed?
>
> drivers/net/usb/asix_devices.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
> index f7cff58fe044..9a7b1136cd98 100644
> --- a/drivers/net/usb/asix_devices.c
> +++ b/drivers/net/usb/asix_devices.c
> @@ -1506,6 +1506,10 @@ static const struct usb_device_id products [] = {
> // ASIX AX88178 10/100/1000
> USB_DEVICE (0x0b95, 0x1780),
> .driver_info = (unsigned long) &ax88178_info,
> +}, {
> + // ASIX AX88179A 10/100/1000
> + USB_DEVICE(0x0b95, 0x1790),
> + .driver_info = (unsigned long)&ax88178_info,
> }, {
Hi Christian!
Seems like there are two problems here:
1) The USB output is telling you this device is a AX88179A : the
changes most likely should be in ax88179_178a.c using the
ax881798_info:
https://elixir.bootlin.com/linux/latest/source/drivers/net/usb/ax88179_178a.c#L1690
2) What Andrew Lunn said. I'll add the asix driver should not be
probing (or claiming) this device - or at least be quiet about it when
it does.
Thanks for looking into this!
cheers,
grant
> // Logitec LAN-GTJ/U2A
> USB_DEVICE (0x0789, 0x0160),
> --
> 2.34.1
>
On Sat, Feb 10, 2024 at 10:20 AM Grant Grundler <[email protected]> wrote:
>
> On Mon, Feb 5, 2024 at 2:40 AM Christian Hewitt
> <[email protected]> wrote:
> >
> > Add a generic AX88179A entry for the 0b95:1790 device id:
> >
> > kernel: usb 2-1: New USB device found, idVendor=0b95, idProduct=1790, bcdDevice= 2.00
> > kernel: usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> > kernel: usb 2-1: Product: AX88179A
> > kernel: usb 2-1: Manufacturer: ASIX
> > kernel: usb 2-1: SerialNumber: 00D24DC0
> > kernel: asix 2-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0000: -32
> > kernel: asix: probe of 2-1:1.0 failed with error -32
> > kernel: ax88179_178a 2-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0040: -32
> > kernel: ax88179_178a 2-1:1.0 eth1: register 'ax88179_178a' at usb-0000:01:00.0-1, ASIX AX88179 USB 3.0 Gigabit Ethernet, 20:7b:d2:d2:4d:c0
> >
> > Signed-off-by: Christian Hewitt <[email protected]>
> > ---
> > The change is tested by a LibreELEC (distro) user who reports the NIC to be working
> > fine (and logs support this) but the "Failed to read reg index 0x0000: -32" errors
> > suggest ax88178_info might not be the correct choice. I'm not a serious coder so I
> > need to "ask the audience" for suggestions on what more might be needed?
> >
> > drivers/net/usb/asix_devices.c | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
> > diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
> > index f7cff58fe044..9a7b1136cd98 100644
> > --- a/drivers/net/usb/asix_devices.c
> > +++ b/drivers/net/usb/asix_devices.c
> > @@ -1506,6 +1506,10 @@ static const struct usb_device_id products [] = {
> > // ASIX AX88178 10/100/1000
> > USB_DEVICE (0x0b95, 0x1780),
> > .driver_info = (unsigned long) &ax88178_info,
> > +}, {
> > + // ASIX AX88179A 10/100/1000
> > + USB_DEVICE(0x0b95, 0x1790),
> > + .driver_info = (unsigned long)&ax88178_info,
> > }, {
>
> Hi Christian!
> Seems like there are two problems here:
> 1) The USB output is telling you this device is a AX88179A : the
> changes most likely should be in ax88179_178a.c using the
> ax881798_info:
> https://elixir.bootlin.com/linux/latest/source/drivers/net/usb/ax88179_178a.c#L1690
Christian,
Let me restate this more clearly: ax88179_178a is already claiming
this device. No need to add anything to asix_devices.c
> 2) What Andrew Lunn said. I'll add the asix driver should not be
> probing (or claiming) this device - or at least be quiet about it when
> it does.
That's why Andrew was asking about where 0x40 index is used.... and
it's not obvious to me either right now since I don't see a definition
for register index 0x40 in ax88179_178a.c file.
Since this is happening with both drivers (asix and ax88179_178a) and
it looks like this is happening before SET_NETDEV_DEV() is called, I'm
going to assume this has something to do with usbnet_probe() calling
pm_runtime_enable().
Andrew's advice to add a WARN_ON call to the function printing "Failed
to read reg index" on failure, is really good as it will tell us the
exact call path through "a maze of twisty little passages, all the
same" (to quote "colossal cave adventure" game from 1977 :D).
cheers,
grant
> Thanks for looking into this!
>
> cheers,
> grant
>
> > // Logitec LAN-GTJ/U2A
> > USB_DEVICE (0x0789, 0x0160),
> > --
> > 2.34.1
> >
> On 10 Feb 2024, at 10:20 pm, Grant Grundler <[email protected]> wrote:
>
> On Mon, Feb 5, 2024 at 2:40 AM Christian Hewitt
> <[email protected]> wrote:
>>
>> Add a generic AX88179A entry for the 0b95:1790 device id:
>>
>> kernel: usb 2-1: New USB device found, idVendor=0b95, idProduct=1790, bcdDevice= 2.00
>> kernel: usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>> kernel: usb 2-1: Product: AX88179A
>> kernel: usb 2-1: Manufacturer: ASIX
>> kernel: usb 2-1: SerialNumber: 00D24DC0
>> kernel: asix 2-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0000: -32
>> kernel: asix: probe of 2-1:1.0 failed with error -32
>> kernel: ax88179_178a 2-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0040: -32
>> kernel: ax88179_178a 2-1:1.0 eth1: register 'ax88179_178a' at usb-0000:01:00.0-1, ASIX AX88179 USB 3.0 Gigabit Ethernet, 20:7b:d2:d2:4d:c0
>>
>> Signed-off-by: Christian Hewitt <[email protected]>
>> ---
>> The change is tested by a LibreELEC (distro) user who reports the NIC to be working
>> fine (and logs support this) but the "Failed to read reg index 0x0000: -32" errors
>> suggest ax88178_info might not be the correct choice. I'm not a serious coder so I
>> need to "ask the audience" for suggestions on what more might be needed?
>>
>> drivers/net/usb/asix_devices.c | 4 ++++
>> 1 file changed, 4 insertions(+)
>>
>> diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
>> index f7cff58fe044..9a7b1136cd98 100644
>> --- a/drivers/net/usb/asix_devices.c
>> +++ b/drivers/net/usb/asix_devices.c
>> @@ -1506,6 +1506,10 @@ static const struct usb_device_id products [] = {
>> // ASIX AX88178 10/100/1000
>> USB_DEVICE (0x0b95, 0x1780),
>> .driver_info = (unsigned long) &ax88178_info,
>> +}, {
>> + // ASIX AX88179A 10/100/1000
>> + USB_DEVICE(0x0b95, 0x1790),
>> + .driver_info = (unsigned long)&ax88178_info,
>> }, {
>
> Hi Christian!
> Seems like there are two problems here:
> 1) The USB output is telling you this device is a AX88179A : the
> changes most likely should be in ax88179_178a.c using the
> ax881798_info:
> https://elixir.bootlin.com/linux/latest/source/drivers/net/usb/ax88179_178a.c#L1690
Yup, having sent the patch some git grep’ing showed me the newer driver
already has the ID for the card included.
> 2) What Andrew Lunn said. I'll add the asix driver should not be
> probing (or claiming) this device - or at least be quiet about it when
> it does.
So the problem now is .. I have both drivers enabled in kernel config:
https://github.com/LibreELEC/LibreELEC.tv/blob/master/projects/RPi/devices/RPi5/linux/linux.aarch64.conf#L2324-L2325
And This is a Linux 6.6.10 kernel boot (without this patch):
https://paste.libreelec.tv/oriented-mastodon.log
The card is visible on the USB bus but why isn’t the correct (newer)
driver probing? ¯\_(ツ)_/¯
Christian