2017-12-18 02:51:11

by Yangbo Lu

[permalink] [raw]
Subject: RE: [v2] arm: dts: ls1021a: fix the value of TMR_FIPER1

Hi Shawn,

Sorry for bother. I just couldn??t find this patch on your git tree.
Could you help to check?
Thanks a lot.

Best regards,
Yangbo Lu

> -----Original Message-----
> From: Shawn Guo [mailto:[email protected]]
> Sent: 2017??11??30?? 8:29
> To: Y.b. Lu <[email protected]>
> Cc: [email protected]; [email protected];
> [email protected]; Mark Rutland <[email protected]>;
> Rob Herring <[email protected]>; Russell King <[email protected]>
> Subject: Re: [v2] arm: dts: ls1021a: fix the value of TMR_FIPER1
>
> On Wed, Nov 29, 2017 at 02:54:58PM +0800, Yangbo Lu wrote:
> > The timer fixed interval period pulse generator register is used to
> > generate periodic pulses. The down count register loads the value
> > programmed in the fixed period interval (FIPER). At every tick of the
> > timer accumulator overflow, the counter decrements by the value of
> > TMR_CTRL[TCLK_PERIOD]. It generates a pulse when the down counter
> > value reaches zero. It reloads the down counter in the cycle following
> > a pulse. To use the TMR_FIPER1 register to generate a 1 PPS event, the
> > value
> > (10^9 nanoseconds) - TCLK_PERIOD should be programmed.
> > It should be 999999995 not 999999990 since TCLK_PERIOD is 5.
> >
> > Signed-off-by: Yangbo Lu <[email protected]>
>
>
> Again, for arm dts, we usually use prefix like 'ARM: dts: ...'
>
> I fixed it up and applied the patch.
>
> Shawn
>
> > ---
> > Changes for v2:
> > - Added Shawn into cc list.
> > ---
> > arch/arm/boot/dts/ls1021a.dtsi | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/boot/dts/ls1021a.dtsi
> > b/arch/arm/boot/dts/ls1021a.dtsi index 64249726b3cb..a861a4b9e319
> > 100644
> > --- a/arch/arm/boot/dts/ls1021a.dtsi
> > +++ b/arch/arm/boot/dts/ls1021a.dtsi
> > @@ -589,7 +589,7 @@
> > fsl,tclk-period = <5>;
> > fsl,tmr-prsc = <2>;
> > fsl,tmr-add = <0xaaaaaaab>;
> > - fsl,tmr-fiper1 = <999999990>;
> > + fsl,tmr-fiper1 = <999999995>;
> > fsl,tmr-fiper2 = <99990>;
> > fsl,max-adj = <499999999>;
> > };
> > --
> > 2.14.1
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > [email protected]
> > https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flist
> >
> s.infradead.org%2Fmailman%2Flistinfo%2Flinux-arm-kernel&data=02%7C01%
> 7
> >
> Cyangbo.lu%40nxp.com%7C703a7f8c490745cac3d708d537896a63%7C686ea
> 1d3bc2b
> >
> 4c6fa92cd99c5c301635%7C0%7C0%7C636475985694945094&sdata=XLw6lJ
> ONCoo2jq
> > Hoixb%2BtlYTDcLC4tPbKWT3eQ7RI7c%3D&reserved=0


2017-12-20 03:33:50

by Shawn Guo

[permalink] [raw]
Subject: Re: [v2] arm: dts: ls1021a: fix the value of TMR_FIPER1

On Mon, Dec 18, 2017 at 02:51:06AM +0000, Y.b. Lu wrote:
> Hi Shawn,
>
> Sorry for bother. I just couldn’t find this patch on your git tree.
> Could you help to check?

Sorry. I forgot to push the update. Just pushed now.

Shawn