2019-11-29 09:27:09

by Biwen Li

Subject: [v6,1/3] dt-bindings: i2c: support property idle-state

This supports property idle-state

Signed-off-by: Biwen Li <[email protected]>
---
Change in v6:
- none

Change in v5:
- none

Change in v4:
- none

Change in v3:
- update subject and description
- add some information for property idle-state

Change in v2:
- update subject and description
- add property idle-state

Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt | 2 ++
1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
index 30ac6a60f041..7abda506b828 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
@@ -25,6 +25,8 @@ Required Properties:
Optional Properties:

- reset-gpios: Reference to the GPIO connected to the reset input.
+ - idle-state: if present, overrides i2c-mux-idle-disconnect,
+ Please refer to Documentation/devicetree/bindings/mux/mux-controller.txt
- i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
children in idle state. This is necessary for example, if there are several
multiplexers on the bus and the devices behind them use same I2C addresses.
--
2.17.1

2019-12-02 23:18:02

by Rob Herring

Subject: Re: [v6,1/3] dt-bindings: i2c: support property idle-state

On Fri, 29 Nov 2019 17:22:20 +0800, Biwen Li wrote:
> This supports property idle-state
>
> Signed-off-by: Biwen Li <[email protected]>
> ---
> Change in v6:
> - none
>
> Change in v5:
> - none
>
> Change in v4:
> - none
>
> Change in v3:
> - update subject and description
> - add some information for property idle-state
>
> Change in v2:
> - update subject and description
> - add property idle-state
>
> Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt | 2 ++
> 1 file changed, 2 insertions(+)
>

Please add Acked-by/Reviewed-by tags when posting new versions. However,
there's no need to repost patches *only* to add the tags. The upstream
maintainer will do that for acks received on the version they apply.

If a tag was not added on purpose, please state why and what changed.

2019-12-03 11:12:45

by Biwen Li

Subject: RE: [EXT] Re: [v6,1/3] dt-bindings: i2c: support property idle-state

>
> Caution: EXT Email
>
> On Fri, 29 Nov 2019 17:22:20 +0800, Biwen Li wrote:
> > This supports property idle-state
> >
> > Signed-off-by: Biwen Li <[email protected]>
> > ---
> > Change in v6:
> > - none
> >
> > Change in v5:
> > - none
> >
> > Change in v4:
> > - none
> >
> > Change in v3:
> > - update subject and description
> > - add some information for property idle-state
> >
> > Change in v2:
> > - update subject and description
> > - add property idle-state
> >
> > Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt | 2 ++
> > 1 file changed, 2 insertions(+)
> >
>
> Please add Acked-by/Reviewed-by tags when posting new versions. However,
> there's no need to repost patches *only* to add the tags. The upstream
> maintainer will do that for acks received on the version they apply.
>
> If a tag was not added on purpose, please state why and what changed.
Okay, got it, thanks.