2010-11-07 21:10:26

by Joe Perches

Subject: [PATCH] drivers/serial/bfin_5xx.c: Fix line continuation defects

Signed-off-by: Joe Perches <[email protected]>
---
drivers/serial/bfin_5xx.c | 6 ++----
1 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index a9eff2b..351cc03 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -734,8 +734,7 @@ static int bfin_serial_startup(struct uart_port *port)
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
IRQF_DISABLED, "BFIN_UART_CTS", uart)) {
uart->cts_pin = -1;
- pr_info("Unable to attach BlackFin UART CTS interrupt.\
- So, disable it.\n");
+ pr_info("Unable to attach BlackFin UART CTS interrupt. So, disable it.\n");
}
}
if (uart->rts_pin >= 0) {
@@ -747,8 +746,7 @@ static int bfin_serial_startup(struct uart_port *port)
if (request_irq(uart->status_irq,
bfin_serial_mctrl_cts_int,
IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) {
- pr_info("Unable to attach BlackFin UART Modem \
- Status interrupt.\n");
+ pr_info("Unable to attach BlackFin UART Modem Status interrupt.\n");
}

/* CTS RTS PINs are negative assertive. */

2010-11-08 02:42:26

by Zhang, Sonic

Subject: RE: [PATCH] drivers/serial/bfin_5xx.c: Fix line continuation defects

>-----Original Message-----
>From: Joe Perches [mailto:[email protected]]
>Sent: Monday, November 08, 2010 5:10 AM
>To: Zhang, Sonic; Mike Frysinger; Greg Kroah-Hartman
>Cc: [email protected];
>[email protected]
>Subject: [PATCH] drivers/serial/bfin_5xx.c: Fix line
>continuation defects
>
>Signed-off-by: Joe Perches <[email protected]>


Acked-by: Sonic Zhang <[email protected]>

Thanks

Sonic Zhang

>---
> drivers/serial/bfin_5xx.c | 6 ++----
> 1 files changed, 2 insertions(+), 4 deletions(-)
>
>diff --git a/drivers/serial/bfin_5xx.c
>b/drivers/serial/bfin_5xx.c index a9eff2b..351cc03 100644
>--- a/drivers/serial/bfin_5xx.c
>+++ b/drivers/serial/bfin_5xx.c
>@@ -734,8 +734,7 @@ static int bfin_serial_startup(struct
>uart_port *port)
> IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
> IRQF_DISABLED, "BFIN_UART_CTS", uart)) {
> uart->cts_pin = -1;
>- pr_info("Unable to attach BlackFin UART
>CTS interrupt.\
>- So, disable it.\n");
>+ pr_info("Unable to attach BlackFin UART
>CTS interrupt. So, disable
>+it.\n");
> }
> }
> if (uart->rts_pin >= 0) {
>@@ -747,8 +746,7 @@ static int bfin_serial_startup(struct
>uart_port *port)
> if (request_irq(uart->status_irq,
> bfin_serial_mctrl_cts_int,
> IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) {
>- pr_info("Unable to attach BlackFin UART Modem \
>- Status interrupt.\n");
>+ pr_info("Unable to attach BlackFin UART Modem
>Status interrupt.\n");
> }
>
> /* CTS RTS PINs are negative assertive. */
>
>
>