diff -rup --exclude='*.o' --exclude='*mod.c' --exclude='*.cmd' --exclude='*.ko' linux-2.6.19-rc2/drivers/ata/libata-sff.c linux-2.6.19-rc2-adma/drivers/ata/libata-sff.c
--- linux-2.6.19-rc2/drivers/ata/libata-sff.c 2006-10-16 18:04:44.000000000 -0600
+++ linux-2.6.19-rc2-adma/drivers/ata/libata-sff.c 2006-10-16 18:02:34.000000000 -0600
@@ -732,7 +732,7 @@ void ata_bmdma_drive_eh(struct ata_port
qc->tf.protocol == ATA_PROT_ATAPI_DMA)) {
u8 host_stat;
- host_stat = ata_bmdma_status(ap);
+ host_stat = ap->ops->bmdma_status(ap);
ata_ehi_push_desc(&ehc->i, "BMDMA stat 0x%x", host_stat);
diff -rup --exclude='*.o' --exclude='*mod.c' --exclude='*.cmd' --exclude='*.ko' linux-2.6.19-rc2/drivers/ata/sata_nv.c linux-2.6.19-rc2-adma/drivers/ata/sata_nv.c
--- linux-2.6.19-rc2/drivers/ata/sata_nv.c 2006-10-16 18:04:44.000000000 -0600
+++ linux-2.6.19-rc2-adma/drivers/ata/sata_nv.c 2006-10-20 18:57:47.000000000 -0600
@@ -29,6 +29,11 @@
* NV-specific details such as register offsets, SATA phy location,
* hotplug info, etc.
*
+ * CK804/MCP04 controllers support an alternate programming interface
+ * similar to the ADMA specification (with some modifications).
+ * This allows the use of NCQ. Non-DMA-mapped ATA commands are still
+ * sent through the legacy interface.
+ *
*/
#include <linux/kernel.h>
@@ -40,10 +45,13 @@
#include <linux/interrupt.h>
#include <linux/device.h>
#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
#include <linux/libata.h>
#define DRV_NAME "sata_nv"
-#define DRV_VERSION "2.0"
+#define DRV_VERSION "3.0"
+
+#define NV_ADMA_DMA_BOUNDARY 0xffffffffUL
enum {
NV_PORTS = 2,
@@ -78,8 +86,139 @@ enum {
// For PCI config register 20
NV_MCP_SATA_CFG_20 = 0x50,
NV_MCP_SATA_CFG_20_SATA_SPACE_EN = 0x04,
+ NV_MCP_SATA_CFG_20_PORT0_EN = (1 << 17),
+ NV_MCP_SATA_CFG_20_PORT1_EN = (1 << 16),
+ NV_MCP_SATA_CFG_20_PORT0_PWB_EN = (1 << 14),
+ NV_MCP_SATA_CFG_20_PORT1_PWB_EN = (1 << 12),
+
+ NV_ADMA_MAX_CPBS = 32,
+ NV_ADMA_CPB_SZ = 128,
+ NV_ADMA_APRD_SZ = 16,
+ NV_ADMA_SGTBL_LEN = (1024 - NV_ADMA_CPB_SZ) /
+ NV_ADMA_APRD_SZ,
+ NV_ADMA_SGTBL_TOTAL_LEN = NV_ADMA_SGTBL_LEN + 5,
+ NV_ADMA_SGTBL_SZ = NV_ADMA_SGTBL_LEN * NV_ADMA_APRD_SZ,
+ NV_ADMA_PORT_PRIV_DMA_SZ = NV_ADMA_MAX_CPBS *
+ (NV_ADMA_CPB_SZ + NV_ADMA_SGTBL_SZ),
+
+ /* BAR5 offset to ADMA general registers */
+ NV_ADMA_GEN = 0x400,
+ NV_ADMA_GEN_CTL = 0x00,
+ NV_ADMA_NOTIFIER_CLEAR = 0x30,
+
+ /* BAR5 offset to ADMA ports */
+ NV_ADMA_PORT = 0x480,
+
+ /* size of ADMA port register space */
+ NV_ADMA_PORT_SIZE = 0x100,
+
+ /* ADMA port registers */
+ NV_ADMA_CTL = 0x40,
+ NV_ADMA_CPB_COUNT = 0x42,
+ NV_ADMA_NEXT_CPB_IDX = 0x43,
+ NV_ADMA_STAT = 0x44,
+ NV_ADMA_CPB_BASE_LOW = 0x48,
+ NV_ADMA_CPB_BASE_HIGH = 0x4C,
+ NV_ADMA_APPEND = 0x50,
+ NV_ADMA_NOTIFIER = 0x68,
+ NV_ADMA_NOTIFIER_ERROR = 0x6C,
+
+ /* NV_ADMA_CTL register bits */
+ NV_ADMA_CTL_HOTPLUG_IEN = (1 << 0),
+ NV_ADMA_CTL_CHANNEL_RESET = (1 << 5),
+ NV_ADMA_CTL_GO = (1 << 7),
+ NV_ADMA_CTL_AIEN = (1 << 8),
+ NV_ADMA_CTL_READ_NON_COHERENT = (1 << 11),
+ NV_ADMA_CTL_WRITE_NON_COHERENT = (1 << 12),
+
+ /* CPB response flag bits */
+ NV_CPB_RESP_DONE = (1 << 0),
+ NV_CPB_RESP_ATA_ERR = (1 << 3),
+ NV_CPB_RESP_CMD_ERR = (1 << 4),
+ NV_CPB_RESP_CPB_ERR = (1 << 7),
+
+ /* CPB control flag bits */
+ NV_CPB_CTL_CPB_VALID = (1 << 0),
+ NV_CPB_CTL_QUEUE = (1 << 1),
+ NV_CPB_CTL_APRD_VALID = (1 << 2),
+ NV_CPB_CTL_IEN = (1 << 3),
+ NV_CPB_CTL_FPDMA = (1 << 4),
+
+ /* APRD flags */
+ NV_APRD_WRITE = (1 << 1),
+ NV_APRD_END = (1 << 2),
+ NV_APRD_CONT = (1 << 3),
+
+ /* NV_ADMA_STAT flags */
+ NV_ADMA_STAT_TIMEOUT = (1 << 0),
+ NV_ADMA_STAT_HOTUNPLUG = (1 << 1),
+ NV_ADMA_STAT_HOTPLUG = (1 << 2),
+ NV_ADMA_STAT_CPBERR = (1 << 4),
+ NV_ADMA_STAT_SERROR = (1 << 5),
+ NV_ADMA_STAT_CMD_COMPLETE = (1 << 6),
+ NV_ADMA_STAT_IDLE = (1 << 8),
+ NV_ADMA_STAT_LEGACY = (1 << 9),
+ NV_ADMA_STAT_STOPPED = (1 << 10),
+ NV_ADMA_STAT_DONE = (1 << 12),
+ NV_ADMA_STAT_ERR = NV_ADMA_STAT_CPBERR |
+ NV_ADMA_STAT_TIMEOUT,
+
+ /* port flags */
+ NV_ADMA_PORT_REGISTER_MODE = (1 << 0),
+
+};
+
+/* ADMA Physical Region Descriptor - one SG segment */
+struct nv_adma_prd {
+ __le64 addr;
+ __le32 len;
+ u8 flags;
+ u8 packet_len;
+ __le16 reserved;
+};
+
+enum nv_adma_regbits {
+ CMDEND = (1 << 15), /* end of command list */
+ WNB = (1 << 14), /* wait-not-BSY */
+ IGN = (1 << 13), /* ignore this entry */
+ CS1n = (1 << (4 + 8)), /* std. PATA signals follow... */
+ DA2 = (1 << (2 + 8)),
+ DA1 = (1 << (1 + 8)),
+ DA0 = (1 << (0 + 8)),
};
+/* ADMA Command Parameter Block
+ The first 5 SG segments are stored inside the Command Parameter Block itself.
+ If there are more than 5 segments the remainder are stored in a separate
+ memory area indicated by next_aprd. */
+struct nv_adma_cpb {
+ u8 resp_flags; /* 0 */
+ u8 reserved1; /* 1 */
+ u8 ctl_flags; /* 2 */
+ /* len is length of taskfile in 64 bit words */
+ u8 len; /* 3 */
+ u8 tag; /* 4 */
+ u8 next_cpb_idx; /* 5 */
+ __le16 reserved2; /* 6-7 */
+ __le16 tf[12]; /* 8-31 */
+ struct nv_adma_prd aprd[5]; /* 32-111 */
+ __le64 next_aprd; /* 112-119 */
+ __le64 reserved3; /* 120-127 */
+};
+
+
+struct nv_adma_port_priv {
+ struct nv_adma_cpb *cpb;
+ dma_addr_t cpb_dma;
+ struct nv_adma_prd *aprd;
+ dma_addr_t aprd_dma;
+ u8 flags;
+ u32 notifier;
+ u32 notifier_error;
+};
+
+#define NV_ADMA_CHECK_INTR(GCTL, PORT) ((GCTL) & ( 1 << (19 + (12 * (PORT)))))
+
static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
static void nv_ck804_host_stop(struct ata_host *host);
static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance);
@@ -93,13 +232,27 @@ static void nv_nf2_thaw(struct ata_port
static void nv_ck804_freeze(struct ata_port *ap);
static void nv_ck804_thaw(struct ata_port *ap);
static void nv_error_handler(struct ata_port *ap);
+static int nv_adma_slave_config(struct scsi_device *sdev);
+static void nv_adma_qc_prep(struct ata_queued_cmd *qc);
+static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc);
+static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance);
+static void nv_adma_irq_clear(struct ata_port *ap);
+static int nv_adma_port_start(struct ata_port *ap);
+static void nv_adma_port_stop(struct ata_port *ap);
+static void nv_adma_error_handler(struct ata_port *ap);
+static void nv_adma_host_stop(struct ata_host *host);
+static void nv_adma_bmdma_setup(struct ata_queued_cmd *qc);
+static void nv_adma_bmdma_start(struct ata_queued_cmd *qc);
+static void nv_adma_bmdma_stop(struct ata_queued_cmd *qc);
+static u8 nv_adma_bmdma_status(struct ata_port *ap);
enum nv_host_type
{
GENERIC,
NFORCE2,
NFORCE3 = NFORCE2, /* NF2 == NF3 as far as sata_nv is concerned */
- CK804
+ CK804,
+ ADMA
};
static const struct pci_device_id nv_pci_tbl[] = {
@@ -156,6 +309,25 @@ static struct scsi_host_template nv_sht
.bios_param = ata_std_bios_param,
};
+static struct scsi_host_template nv_adma_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = NV_ADMA_MAX_CPBS,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = NV_ADMA_DMA_BOUNDARY,
+ .slave_configure = nv_adma_slave_config,
+ .slave_destroy = ata_scsi_slave_destroy,
+ .bios_param = ata_std_bios_param,
+};
+
static const struct ata_port_operations nv_generic_ops = {
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
@@ -237,6 +409,33 @@ static const struct ata_port_operations
.host_stop = nv_ck804_host_stop,
};
+static const struct ata_port_operations nv_adma_ops = {
+ .port_disable = ata_port_disable,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .exec_command = ata_exec_command,
+ .check_status = ata_check_status,
+ .dev_select = ata_std_dev_select,
+ .bmdma_setup = nv_adma_bmdma_setup,
+ .bmdma_start = nv_adma_bmdma_start,
+ .bmdma_stop = nv_adma_bmdma_stop,
+ .bmdma_status = nv_adma_bmdma_status,
+ .qc_prep = nv_adma_qc_prep,
+ .qc_issue = nv_adma_qc_issue,
+ .freeze = nv_ck804_freeze,
+ .thaw = nv_ck804_thaw,
+ .error_handler = nv_adma_error_handler,
+ .post_internal_cmd = nv_adma_bmdma_stop,
+ .data_xfer = ata_mmio_data_xfer,
+ .irq_handler = nv_adma_interrupt,
+ .irq_clear = nv_adma_irq_clear,
+ .scr_read = nv_scr_read,
+ .scr_write = nv_scr_write,
+ .port_start = nv_adma_port_start,
+ .port_stop = nv_adma_port_stop,
+ .host_stop = nv_adma_host_stop,
+};
+
static struct ata_port_info nv_port_info[] = {
/* generic */
{
@@ -265,6 +464,16 @@ static struct ata_port_info nv_port_info
.udma_mask = NV_UDMA_MASK,
.port_ops = &nv_ck804_ops,
},
+ /* ADMA */
+ {
+ .sht = &nv_adma_sht,
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO | ATA_FLAG_NCQ,
+ .pio_mask = NV_PIO_MASK,
+ .mwdma_mask = NV_MWDMA_MASK,
+ .udma_mask = NV_UDMA_MASK,
+ .port_ops = &nv_adma_ops,
+ },
};
MODULE_AUTHOR("NVIDIA");
@@ -273,6 +482,619 @@ MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, nv_pci_tbl);
MODULE_VERSION(DRV_VERSION);
+static int adma_enabled = 1;
+
+static int nv_adma_slave_config(struct scsi_device *sdev)
+{
+ struct ata_port *ap = ata_shost_to_port(sdev->host);
+ u64 bounce_limit;
+ unsigned long segment_boundary;
+ unsigned short sg_tablesize;
+ int rc;
+
+ rc = ata_scsi_slave_config(sdev);
+
+ if (sdev->id >= ATA_MAX_DEVICES || sdev->channel || sdev->lun)
+ /* Not a proper libata device, ignore */
+ return rc;
+
+ if (ap->device[sdev->id].class == ATA_DEV_ATAPI) {
+ /*
+ * NVIDIA reports that ADMA mode does not support ATAPI commands.
+ * Therefore ATAPI commands are sent through the legacy interface.
+ * However, the legacy interface only supports 32-bit DMA.
+ * Restrict DMA parameters as required by the legacy interface
+ * when an ATAPI device is connected.
+ */
+ bounce_limit = ATA_DMA_MASK;
+ segment_boundary = ATA_DMA_BOUNDARY;
+ /* Subtract 1 since an extra entry may be needed for padding, see
+ libata-scsi.c */
+ sg_tablesize = LIBATA_MAX_PRD - 1;
+ }
+ else {
+ bounce_limit = *ap->dev->dma_mask;
+ segment_boundary = NV_ADMA_DMA_BOUNDARY;
+ sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN;
+ }
+
+ blk_queue_bounce_limit(sdev->request_queue, bounce_limit);
+ blk_queue_segment_boundary(sdev->request_queue, segment_boundary);
+ blk_queue_max_hw_segments(sdev->request_queue, sg_tablesize);
+ ata_port_printk(ap, KERN_INFO,
+ "bounce limit 0x%llX, segment boundary 0x%lX, hw segs %hu\n",
+ (unsigned long long)bounce_limit, segment_boundary, sg_tablesize);
+ return rc;
+}
+
+static unsigned int nv_adma_tf_to_cpb(struct ata_taskfile *tf, u16 *cpb)
+{
+ unsigned int idx = 0;
+
+ cpb[idx++] = cpu_to_le16((ATA_REG_DEVICE << 8) | tf->device | WNB);
+
+ if ((tf->flags & ATA_TFLAG_LBA48) == 0) {
+ cpb[idx++] = cpu_to_le16(IGN);
+ cpb[idx++] = cpu_to_le16(IGN);
+ cpb[idx++] = cpu_to_le16(IGN);
+ cpb[idx++] = cpu_to_le16(IGN);
+ cpb[idx++] = cpu_to_le16(IGN);
+ }
+ else {
+ cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->hob_feature);
+ cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->hob_nsect);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAL << 8) | tf->hob_lbal);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAM << 8) | tf->hob_lbam);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->hob_lbah);
+ }
+ cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->feature);
+ cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->nsect);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAL << 8) | tf->lbal);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAM << 8) | tf->lbam);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->lbah);
+
+ cpb[idx++] = cpu_to_le16((ATA_REG_CMD << 8) | tf->command | CMDEND);
+
+ return idx;
+}
+
+static inline void __iomem *__nv_adma_ctl_block(void __iomem *mmio,
+ unsigned int port_no)
+{
+ mmio += NV_ADMA_PORT + port_no * NV_ADMA_PORT_SIZE;
+ return mmio;
+}
+
+static inline void __iomem *nv_adma_ctl_block(struct ata_port *ap)
+{
+ return __nv_adma_ctl_block(ap->host->mmio_base, ap->port_no);
+}
+
+static inline void __iomem *nv_adma_gen_block(struct ata_port *ap)
+{
+ return (ap->host->mmio_base + NV_ADMA_GEN);
+}
+
+static inline void __iomem *nv_adma_notifier_clear_block(struct ata_port *ap)
+{
+ return (nv_adma_gen_block(ap) + NV_ADMA_NOTIFIER_CLEAR + (4 * ap->port_no));
+}
+
+static int nv_adma_host_intr(struct ata_port *ap)
+{
+ void __iomem *mmio = nv_adma_ctl_block(ap);
+ struct nv_adma_port_priv *pp = ap->private_data;
+ u16 status;
+ u32 gen_ctl;
+ u16 flags;
+ int have_global_err = 0;
+
+ /* if in ATA register mode, use standard ata interrupt handler */
+ if (pp->flags & NV_ADMA_PORT_REGISTER_MODE) {
+ struct ata_queued_cmd *qc;
+ VPRINTK("in ATA register mode\n");
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
+ return ata_host_intr(ap, qc);
+ else {
+ /* No request pending? Clear interrupt status
+ anyway, in case there's one pending. */
+ ap->ops->check_status(ap);
+ return 1;
+ }
+ }
+
+ gen_ctl = readl(nv_adma_gen_block(ap) + NV_ADMA_GEN_CTL);
+
+ if( !NV_ADMA_CHECK_INTR(gen_ctl, ap->port_no) && !pp->notifier &&
+ !pp->notifier_error)
+ /* Nothing to do */
+ return 0;
+
+ status = readw(mmio + NV_ADMA_STAT);
+
+ /* Clear status so that any CPB completions after this point in the
+ handler will raise another interrupt */
+ writew(status, mmio + NV_ADMA_STAT);
+ readl(mmio + NV_ADMA_STAT); /* flush posted write */
+ mb();
+
+ /* freeze if hotplugged */
+ if (unlikely(status & (NV_ADMA_STAT_HOTPLUG | NV_ADMA_STAT_HOTUNPLUG))) {
+ ata_port_printk(ap, KERN_NOTICE, "Hotplug event, freezing\n");
+ ata_port_freeze(ap);
+ return 1;
+ }
+
+ if (pp->notifier_error) {
+ ata_port_printk(ap, KERN_ERR, "notifier error, stat=0x%x, "
+ "notifier=0x%X, notifier_error=0x%X", status,
+ pp->notifier, pp->notifier_error );
+ have_global_err = 1;
+ }
+
+ if (status & NV_ADMA_STAT_TIMEOUT) {
+ ata_port_printk(ap, KERN_ERR, "timeout, stat=0x%x\n", status);
+ have_global_err = 1;
+ }
+ if (status & NV_ADMA_STAT_CPBERR) {
+ ata_port_printk(ap, KERN_ERR, "CPB error, stat=0x%x\n", status);
+ have_global_err = 1;
+ }
+ if (status & NV_ADMA_STAT_STOPPED) {
+ VPRINTK("ADMA stopped, stat = 0x%x\n", status);
+ }
+ if (status & NV_ADMA_STAT_CMD_COMPLETE) {
+ VPRINTK("ADMA command complete, stat = 0x%x\n", status);
+ }
+ if ((status & NV_ADMA_STAT_DONE) || have_global_err) {
+ /** Check CPBs for completed commands */
+ int i;
+ for( i=0;i<NV_ADMA_MAX_CPBS;i++)
+ if( ap->sactive & (1 << i ) ||
+ ( ata_tag_valid(ap->active_tag) && ap->active_tag == i ) ) {
+ struct nv_adma_cpb *cpb = &pp->cpb[i];
+ int complete = 0, have_err = 0;
+ flags = cpb->resp_flags;
+ VPRINTK("CPB %d, stat=0x%x, flags=0x%x\n", i, status, flags);
+
+ if (flags & NV_CPB_RESP_DONE) {
+ VPRINTK("CPB flags done, flags=0x%x\n", flags);
+ complete = 1;
+ }
+ if (flags & NV_CPB_RESP_ATA_ERR) {
+ ata_port_printk(ap, KERN_ERR, "CPB flags ATA err, flags=0x%x\n", flags);
+ have_err = 1;
+ complete = 1;
+ }
+ if (flags & NV_CPB_RESP_CMD_ERR) {
+ ata_port_printk(ap, KERN_ERR, "CPB flags CMD err, flags=0x%x\n", flags);
+ have_err = 1;
+ complete = 1;
+ }
+ if (flags & NV_CPB_RESP_CPB_ERR) {
+ ata_port_printk(ap, KERN_ERR, "CPB flags CPB err, flags=0x%x\n", flags);
+ have_err = 1;
+ complete = 1;
+ }
+ if(complete || have_global_err)
+ {
+ struct ata_queued_cmd *qc = ata_qc_from_tag(ap, i);
+ if(likely(qc)) {
+ u8 ata_status = 0;
+ /* Only use the ATA port status for non-NCQ commands.
+ For NCQ commands the current status may have nothing to do with
+ the command just completed. */
+ if(qc->tf.protocol != ATA_PROT_NCQ)
+ ata_status = readb(mmio + (ATA_REG_STATUS * 4));
+
+ if(have_err || have_global_err)
+ ata_status |= ATA_ERR;
+
+ qc->err_mask |= ac_err_mask(ata_status);
+ DPRINTK("Completing qc from tag %d with err_mask %u\n",i,qc->err_mask);
+ ata_qc_complete(qc);
+ }
+ }
+ }
+ }
+
+ return 1; /* irq handled if we got here */
+}
+
+static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
+{
+ struct ata_host *host = dev_instance;
+ int i, handled = 0;
+
+ spin_lock(&host->lock);
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
+ struct nv_adma_port_priv *pp = ap->private_data;
+ void __iomem *mmio = nv_adma_ctl_block(ap);
+ pp->notifier = readl(mmio + NV_ADMA_NOTIFIER);
+ pp->notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
+ handled += nv_adma_host_intr(ap);
+ }
+ }
+
+ /* Clear notifiers. Yes, this does appear to have to be done at the very end,
+ otherwise things grind to a halt quite quickly. */
+ if (handled)
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+ struct nv_adma_port_priv *pp = ap->private_data;
+ writel(pp->notifier | pp->notifier_error,
+ nv_adma_notifier_clear_block(ap));
+ }
+
+ spin_unlock(&host->lock);
+
+ return IRQ_RETVAL(handled);
+}
+
+static void nv_adma_irq_clear(struct ata_port *ap)
+{
+ void __iomem *mmio = nv_adma_ctl_block(ap);
+ u16 status = readw(mmio + NV_ADMA_STAT);
+ u32 notifier = readl(mmio + NV_ADMA_NOTIFIER);
+ u32 notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
+
+ /* clear ADMA status */
+ writew(status, mmio + NV_ADMA_STAT);
+ writel(notifier | notifier_error,
+ nv_adma_notifier_clear_block(ap));
+
+ /** clear legacy status */
+ ap->flags &= ~ATA_FLAG_MMIO;
+ ata_bmdma_irq_clear(ap);
+ ap->flags |= ATA_FLAG_MMIO;
+}
+
+static void nv_adma_bmdma_setup(struct ata_queued_cmd *qc)
+{
+ struct nv_adma_port_priv *pp = qc->ap->private_data;
+
+ if(pp->flags & NV_ADMA_PORT_REGISTER_MODE) {
+ WARN_ON(1);
+ return;
+ }
+
+ qc->ap->flags &= ~ATA_FLAG_MMIO;
+ ata_bmdma_setup(qc);
+ qc->ap->flags |= ATA_FLAG_MMIO;
+}
+
+static void nv_adma_bmdma_start(struct ata_queued_cmd *qc)
+{
+ struct nv_adma_port_priv *pp = qc->ap->private_data;
+
+ if(pp->flags & NV_ADMA_PORT_REGISTER_MODE) {
+ WARN_ON(1);
+ return;
+ }
+
+ qc->ap->flags &= ~ATA_FLAG_MMIO;
+ ata_bmdma_start(qc);
+ qc->ap->flags |= ATA_FLAG_MMIO;
+}
+
+static void nv_adma_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ struct nv_adma_port_priv *pp = qc->ap->private_data;
+
+ if(pp->flags & NV_ADMA_PORT_REGISTER_MODE)
+ return;
+
+ qc->ap->flags &= ~ATA_FLAG_MMIO;
+ ata_bmdma_stop(qc);
+ qc->ap->flags |= ATA_FLAG_MMIO;
+}
+
+static u8 nv_adma_bmdma_status(struct ata_port *ap)
+{
+ u8 status;
+ struct nv_adma_port_priv *pp = ap->private_data;
+
+ WARN_ON(pp->flags & NV_ADMA_PORT_REGISTER_MODE);
+
+ ap->flags &= ~ATA_FLAG_MMIO;
+ status = ata_bmdma_status(ap);
+ ap->flags |= ATA_FLAG_MMIO;
+ return status;
+}
+
+static void nv_adma_register_mode(struct ata_port *ap)
+{
+ void __iomem *mmio = nv_adma_ctl_block(ap);
+ struct nv_adma_port_priv *pp = ap->private_data;
+ u16 tmp;
+
+ if (pp->flags & NV_ADMA_PORT_REGISTER_MODE)
+ return;
+
+ tmp = readw(mmio + NV_ADMA_CTL);
+ writew(tmp & ~NV_ADMA_CTL_GO, mmio + NV_ADMA_CTL);
+
+ pp->flags |= NV_ADMA_PORT_REGISTER_MODE;
+}
+
+static void nv_adma_mode(struct ata_port *ap)
+{
+ void __iomem *mmio = nv_adma_ctl_block(ap);
+ struct nv_adma_port_priv *pp = ap->private_data;
+ u16 tmp;
+
+ if (!(pp->flags & NV_ADMA_PORT_REGISTER_MODE))
+ return;
+
+ tmp = readw(mmio + NV_ADMA_CTL);
+ writew(tmp | NV_ADMA_CTL_GO, mmio + NV_ADMA_CTL);
+
+ pp->flags &= ~NV_ADMA_PORT_REGISTER_MODE;
+}
+
+static int nv_adma_port_start(struct ata_port *ap)
+{
+ struct device *dev = ap->host->dev;
+ struct nv_adma_port_priv *pp;
+ int rc;
+ void *mem;
+ dma_addr_t mem_dma;
+ void __iomem *mmio = nv_adma_ctl_block(ap);
+ u16 tmp;
+
+ VPRINTK("ENTER\n");
+
+ rc = ata_port_start(ap);
+ if (rc)
+ return rc;
+
+ pp = kzalloc(sizeof(*pp), GFP_KERNEL);
+ if (!pp) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
+
+ mem = dma_alloc_coherent(dev, NV_ADMA_PORT_PRIV_DMA_SZ,
+ &mem_dma, GFP_KERNEL);
+
+ if (!mem) {
+ rc = -ENOMEM;
+ goto err_out_kfree;
+ }
+ memset(mem, 0, NV_ADMA_PORT_PRIV_DMA_SZ);
+
+ /*
+ * First item in chunk of DMA memory:
+ * 128-byte command parameter block (CPB)
+ * one for each command tag
+ */
+ pp->cpb = mem;
+ pp->cpb_dma = mem_dma;
+
+ writel(mem_dma & 0xFFFFFFFF, mmio + NV_ADMA_CPB_BASE_LOW);
+ writel((mem_dma >> 16 ) >> 16, mmio + NV_ADMA_CPB_BASE_HIGH);
+
+ mem += NV_ADMA_MAX_CPBS * NV_ADMA_CPB_SZ;
+ mem_dma += NV_ADMA_MAX_CPBS * NV_ADMA_CPB_SZ;
+
+ /*
+ * Second item: block of ADMA_SGTBL_LEN s/g entries
+ */
+ pp->aprd = mem;
+ pp->aprd_dma = mem_dma;
+
+ ap->private_data = pp;
+
+ /* clear any outstanding interrupt conditions */
+ writew(0xffff, mmio + NV_ADMA_STAT);
+
+ /* initialize port variables */
+ pp->flags = NV_ADMA_PORT_REGISTER_MODE;
+
+ /* clear CPB fetch count */
+ writew(0, mmio + NV_ADMA_CPB_COUNT);
+
+ /* clear GO for register mode */
+ tmp = readw(mmio + NV_ADMA_CTL);
+ writew(tmp & ~NV_ADMA_CTL_GO, mmio + NV_ADMA_CTL);
+
+ tmp = readw(mmio + NV_ADMA_CTL);
+ writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
+ readl( mmio + NV_ADMA_CTL ); /* flush posted write */
+ udelay(1);
+ writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
+ readl( mmio + NV_ADMA_CTL ); /* flush posted write */
+
+ return 0;
+
+err_out_kfree:
+ kfree(pp);
+err_out:
+ ata_port_stop(ap);
+ return rc;
+}
+
+static void nv_adma_port_stop(struct ata_port *ap)
+{
+ struct device *dev = ap->host->dev;
+ struct nv_adma_port_priv *pp = ap->private_data;
+ void __iomem *mmio = nv_adma_ctl_block(ap);
+
+ VPRINTK("ENTER\n");
+
+ writew(0, mmio + NV_ADMA_CTL);
+
+ ap->private_data = NULL;
+ dma_free_coherent(dev, NV_ADMA_PORT_PRIV_DMA_SZ, pp->cpb, pp->cpb_dma);
+ kfree(pp);
+ ata_port_stop(ap);
+}
+
+
+static void nv_adma_setup_port(struct ata_probe_ent *probe_ent, unsigned int port)
+{
+ void __iomem *mmio = probe_ent->mmio_base;
+ struct ata_ioports *ioport = &probe_ent->port[port];
+
+ VPRINTK("ENTER\n");
+
+ mmio += NV_ADMA_PORT + port * NV_ADMA_PORT_SIZE;
+
+ ioport->cmd_addr = (unsigned long) mmio;
+ ioport->data_addr = (unsigned long) mmio + (ATA_REG_DATA * 4);
+ ioport->error_addr =
+ ioport->feature_addr = (unsigned long) mmio + (ATA_REG_ERR * 4);
+ ioport->nsect_addr = (unsigned long) mmio + (ATA_REG_NSECT * 4);
+ ioport->lbal_addr = (unsigned long) mmio + (ATA_REG_LBAL * 4);
+ ioport->lbam_addr = (unsigned long) mmio + (ATA_REG_LBAM * 4);
+ ioport->lbah_addr = (unsigned long) mmio + (ATA_REG_LBAH * 4);
+ ioport->device_addr = (unsigned long) mmio + (ATA_REG_DEVICE * 4);
+ ioport->status_addr =
+ ioport->command_addr = (unsigned long) mmio + (ATA_REG_STATUS * 4);
+ ioport->altstatus_addr =
+ ioport->ctl_addr = (unsigned long) mmio + 0x20;
+}
+
+static int nv_adma_host_init(struct ata_probe_ent *probe_ent)
+{
+ struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
+ unsigned int i;
+ u32 tmp32;
+
+ VPRINTK("ENTER\n");
+
+ /* enable ADMA on the ports */
+ pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, &tmp32);
+ tmp32 |= NV_MCP_SATA_CFG_20_PORT0_EN |
+ NV_MCP_SATA_CFG_20_PORT0_PWB_EN |
+ NV_MCP_SATA_CFG_20_PORT1_EN |
+ NV_MCP_SATA_CFG_20_PORT1_PWB_EN;
+
+ pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32);
+
+ for (i = 0; i < probe_ent->n_ports; i++)
+ nv_adma_setup_port(probe_ent, i);
+
+ for (i = 0; i < probe_ent->n_ports; i++) {
+ void __iomem *mmio = __nv_adma_ctl_block(probe_ent->mmio_base, i);
+ u16 tmp;
+
+ /* enable interrupt, clear reset if not already clear */
+ tmp = readw(mmio + NV_ADMA_CTL);
+ writew(tmp | NV_ADMA_CTL_AIEN, mmio + NV_ADMA_CTL);
+ }
+
+ return 0;
+}
+
+static void nv_adma_fill_aprd(struct ata_queued_cmd *qc,
+ struct scatterlist *sg,
+ int idx,
+ struct nv_adma_prd *aprd)
+{
+ u32 flags;
+
+ memset(aprd, 0, sizeof(struct nv_adma_prd));
+
+ flags = 0;
+ if (qc->tf.flags & ATA_TFLAG_WRITE)
+ flags |= NV_APRD_WRITE;
+ if (idx == qc->n_elem - 1)
+ flags |= NV_APRD_END;
+ else if (idx != 4)
+ flags |= NV_APRD_CONT;
+
+ aprd->addr = cpu_to_le64(((u64)sg_dma_address(sg)));
+ aprd->len = cpu_to_le32(((u32)sg_dma_len(sg))); /* len in bytes */
+ aprd->flags = cpu_to_le32(flags);
+}
+
+static void nv_adma_fill_sg(struct ata_queued_cmd *qc, struct nv_adma_cpb *cpb)
+{
+ struct nv_adma_port_priv *pp = qc->ap->private_data;
+ unsigned int idx;
+ struct nv_adma_prd *aprd;
+ struct scatterlist *sg;
+
+ VPRINTK("ENTER\n");
+
+ idx = 0;
+
+ ata_for_each_sg(sg, qc) {
+ aprd = (idx < 5) ? &cpb->aprd[idx] : &pp->aprd[NV_ADMA_SGTBL_LEN * qc->tag + (idx-5)];
+ nv_adma_fill_aprd(qc, sg, idx, aprd);
+ idx++;
+ }
+ if (idx > 5)
+ cpb->next_aprd = cpu_to_le64(((u64)(pp->aprd_dma + NV_ADMA_SGTBL_SZ * qc->tag)));
+}
+
+static void nv_adma_qc_prep(struct ata_queued_cmd *qc)
+{
+ struct nv_adma_port_priv *pp = qc->ap->private_data;
+ struct nv_adma_cpb *cpb = &pp->cpb[qc->tag];
+ u8 ctl_flags = NV_CPB_CTL_CPB_VALID |
+ NV_CPB_CTL_APRD_VALID |
+ NV_CPB_CTL_IEN;
+
+ VPRINTK("qc->flags = 0x%lx\n", qc->flags);
+
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP) ||
+ qc->tf.protocol == ATA_PROT_ATAPI_DMA) {
+ ata_qc_prep(qc);
+ return;
+ }
+
+ memset(cpb, 0, sizeof(struct nv_adma_cpb));
+
+ cpb->len = 3;
+ cpb->tag = qc->tag;
+ cpb->next_cpb_idx = 0;
+
+ /* turn on NCQ flags for NCQ commands */
+ if (qc->tf.protocol == ATA_PROT_NCQ)
+ ctl_flags |= NV_CPB_CTL_QUEUE | NV_CPB_CTL_FPDMA;
+
+ nv_adma_tf_to_cpb(&qc->tf, cpb->tf);
+
+ nv_adma_fill_sg(qc, cpb);
+
+ /* Be paranoid and don't let the device see NV_CPB_CTL_CPB_VALID until we are
+ finished filling in all of the contents */
+ wmb();
+ cpb->ctl_flags = ctl_flags;
+}
+
+static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc)
+{
+ void __iomem *mmio = nv_adma_ctl_block(qc->ap);
+
+ VPRINTK("ENTER\n");
+
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP) ||
+ qc->tf.protocol == ATA_PROT_ATAPI_DMA) {
+ /* use ATA register mode */
+ VPRINTK("no dmamap or ATAPI, using ATA register mode: 0x%lx\n", qc->flags);
+ nv_adma_register_mode(qc->ap);
+ return ata_qc_issue_prot(qc);
+ } else
+ nv_adma_mode(qc->ap);
+
+ /* write append register, command tag in lower 8 bits
+ and (number of cpbs to append -1) in top 8 bits */
+ wmb();
+ writew(qc->tag, mmio + NV_ADMA_APPEND);
+
+ DPRINTK("Issued tag %u\n",qc->tag);
+
+ return 0;
+}
+
static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
@@ -462,6 +1284,56 @@ static void nv_error_handler(struct ata_
nv_hardreset, ata_std_postreset);
}
+static void nv_adma_error_handler(struct ata_port *ap)
+{
+ struct nv_adma_port_priv *pp = ap->private_data;
+ if(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) {
+ void __iomem *mmio = nv_adma_ctl_block(ap);
+ int i;
+ u16 tmp;
+
+ u32 notifier = readl(mmio + NV_ADMA_NOTIFIER);
+ u32 notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
+ u32 gen_ctl = readl(nv_adma_gen_block(ap) + NV_ADMA_GEN_CTL);
+ u32 status = readw(mmio + NV_ADMA_STAT);
+
+ ata_port_printk(ap, KERN_ERR, "EH in ADMA mode, notifier 0x%X "
+ "notifier_error 0x%X gen_ctl 0x%X status 0x%X\n",
+ notifier, notifier_error, gen_ctl, status);
+
+ for( i=0;i<NV_ADMA_MAX_CPBS;i++) {
+ struct nv_adma_cpb *cpb = &pp->cpb[i];
+ if( cpb->ctl_flags || cpb->resp_flags )
+ ata_port_printk(ap, KERN_ERR,
+ "CPB %d: ctl_flags 0x%x, resp_flags 0x%x\n",
+ i, cpb->ctl_flags, cpb->resp_flags);
+ }
+
+ /* Push us back into port register mode for error handling. */
+ nv_adma_register_mode(ap);
+
+ ata_port_printk(ap, KERN_ERR, "Resetting port\n");
+
+ /* Mark all of the CPBs as invalid to prevent them from being executed */
+ for( i=0;i<NV_ADMA_MAX_CPBS;i++)
+ pp->cpb[i].ctl_flags &= ~NV_CPB_CTL_CPB_VALID;
+
+ /* clear CPB fetch count */
+ writew(0, mmio + NV_ADMA_CPB_COUNT);
+
+ /* Reset channel */
+ tmp = readw(mmio + NV_ADMA_CTL);
+ writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
+ readl( mmio + NV_ADMA_CTL ); /* flush posted write */
+ udelay(1);
+ writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
+ readl( mmio + NV_ADMA_CTL ); /* flush posted write */
+ }
+
+ ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
+ nv_hardreset, ata_std_postreset);
+}
+
static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version = 0;
@@ -471,6 +1343,8 @@ static int nv_init_one (struct pci_dev *
int rc;
u32 bar;
unsigned long base;
+ unsigned long type = ent->driver_data;
+ int mask_set = 0;
// Make sure this is a SATA controller by counting the number of bars
// (NVIDIA SATA controllers will always have six bars). Otherwise,
@@ -479,9 +1353,9 @@ static int nv_init_one (struct pci_dev *
if (pci_resource_start(pdev, bar) == 0)
return -ENODEV;
- if (!printed_version++)
+ if ( !printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
-
+
rc = pci_enable_device(pdev);
if (rc)
goto err_out;
@@ -492,16 +1366,26 @@ static int nv_init_one (struct pci_dev *
goto err_out_disable;
}
- rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
- if (rc)
- goto err_out_regions;
- rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
- if (rc)
- goto err_out_regions;
+ if(type >= CK804 && adma_enabled) {
+ dev_printk(KERN_NOTICE, &pdev->dev, "Using ADMA mode\n");
+ type = ADMA;
+ if(!pci_set_dma_mask(pdev, DMA_64BIT_MASK) &&
+ !pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))
+ mask_set = 1;
+ }
+
+ if(!mask_set) {
+ rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ goto err_out_regions;
+ rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ goto err_out_regions;
+ }
rc = -ENOMEM;
- ppi[0] = ppi[1] = &nv_port_info[ent->driver_data];
+ ppi[0] = ppi[1] = &nv_port_info[type];
probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
if (!probe_ent)
goto err_out_regions;
@@ -518,7 +1402,7 @@ static int nv_init_one (struct pci_dev *
probe_ent->port[1].scr_addr = base + NV_PORT1_SCR_REG_OFFSET;
/* enable SATA space for CK804 */
- if (ent->driver_data == CK804) {
+ if (type >= CK804) {
u8 regval;
pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val);
@@ -528,6 +1412,12 @@ static int nv_init_one (struct pci_dev *
pci_set_master(pdev);
+ if (type == ADMA) {
+ rc = nv_adma_host_init(probe_ent);
+ if (rc)
+ goto err_out_iounmap;
+ }
+
rc = ata_device_add(probe_ent);
if (rc != NV_PORTS)
goto err_out_iounmap;
@@ -562,6 +1452,33 @@ static void nv_ck804_host_stop(struct at
ata_pci_host_stop(host);
}
+static void nv_adma_host_stop(struct ata_host *host)
+{
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+ int i;
+ u32 tmp32;
+
+ for (i = 0; i < host->n_ports; i++) {
+ void __iomem *mmio = __nv_adma_ctl_block(host->mmio_base, i);
+ u16 tmp;
+
+ /* disable interrupt */
+ tmp = readw(mmio + NV_ADMA_CTL);
+ writew(tmp & ~NV_ADMA_CTL_AIEN, mmio + NV_ADMA_CTL);
+ }
+
+ /* disable ADMA on the ports */
+ pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, &tmp32);
+ tmp32 &= ~(NV_MCP_SATA_CFG_20_PORT0_EN |
+ NV_MCP_SATA_CFG_20_PORT0_PWB_EN |
+ NV_MCP_SATA_CFG_20_PORT1_EN |
+ NV_MCP_SATA_CFG_20_PORT1_PWB_EN);
+
+ pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32);
+
+ nv_ck804_host_stop(host);
+}
+
static int __init nv_init(void)
{
return pci_register_driver(&nv_pci_driver);
@@ -574,3 +1491,5 @@ static void __exit nv_exit(void)
module_init(nv_init);
module_exit(nv_exit);
+module_param_named(adma, adma_enabled, bool, 0444);
+MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: false)");
Robert Hancock <[email protected]> writes:
> Here's the latest version of this patch. Changes since the last version I posted: fix to actually use the legacy interface for ATAPI as was intended, set the proper sg_tablesize for legacy and ADMA mode, some message and formatting cleanups, and ADMA is now enabled by default.
>
> This patch is against 2.6.19-rc2.
>
> As before, testing by people with this hardware would be appreciated. Also, it would be nice to get this into libata-dev or -mm to get some more exposure..
I tested it on a NF4-Professional system with 8GB RAM and a single
SATA disk. It first did nicely in LTP and some other tests,
but during a bonnie++ run it eventually blocked with all
IO hanging forever. No output either. I did a full backtrace
and it just showed the processes waiting for a IO wakeup.
-Andi
sata_nv 0000:00:07.0: Using ADMA mode
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata1: SATA max UDMA/133 cmd 0xFFFFC2000003C480 ctl 0xFFFFC2000003C4A0 bmdma 0x1C10 irq 22
ata2: SATA max UDMA/133 cmd 0xFFFFC2000003C580 ctl 0xFFFFC2000003C5A0 bmdma 0x1C18 irq 22
scsi0 : sata_nv
ata1: SATA link down (SStatus 0 SControl 300)
scsi1 : sata_nv
ata2: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSI1] -> GSI 21 (level, high) -> IRQ 21
sata_nv 0000:00:08.0: Using ADMA mode
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata3: SATA max UDMA/133 cmd 0xFFFFC2000003E480 ctl 0xFFFFC2000003E4A0 bmdma 0x1C20 irq 21
ata4: SATA max UDMA/133 cmd 0xFFFFC2000003E580 ctl 0xFFFFC2000003E5A0 bmdma 0x1C28 irq 21
scsi2 : sata_nv
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-6, max UDMA/133, 312581808 sectors: LBA48
ata3.00: ata3: dev 0 multi count 16
ata3.00: configured for UDMA/133
scsi3 : sata_nv
ata4: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA ST3160023AS 3.18 PQ: 0 ANSI: 5
ata3: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
Andi Kleen <[email protected]> writes:
> I tested it on a NF4-Professional system with 8GB RAM and a single
> SATA disk. It first did nicely in LTP and some other tests,
> but during a bonnie++ run it eventually blocked with all
> IO hanging forever. No output either. I did a full backtrace
> and it just showed the processes waiting for a IO wakeup.
Hmm, to follow myself up: after a few more minutes the machine recovered
and i could log in again (overall the stall was at least 5+ minutes
though)
Not sure whom to blame, the IO driver might be actually innocent
and it just be one of the usual known but unfixed IO starvation problems.
-Andi
Andi Kleen wrote:
> Andi Kleen <[email protected]> writes:
>
>> I tested it on a NF4-Professional system with 8GB RAM and a single
>> SATA disk. It first did nicely in LTP and some other tests,
>> but during a bonnie++ run it eventually blocked with all
>> IO hanging forever. No output either. I did a full backtrace
>> and it just showed the processes waiting for a IO wakeup.
>
> Hmm, to follow myself up: after a few more minutes the machine recovered
> and i could log in again (overall the stall was at least 5+ minutes
> though)
>
> Not sure whom to blame, the IO driver might be actually innocent
> and it just be one of the usual known but unfixed IO starvation problems.
>
> -Andi
Hmm.. The system hanging up for 5 minutes and then recovering seems
rather odd, as far as I know the timeouts in libata are all quite a bit
shorter than that. Was there anything unusual in dmesg? If the IO
commands weren't completing at the driver level then I would expect the
error handling to kick in in some fashion..
--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from [email protected]
Home Page: http://www.roberthancock.com/
On Sunday 22 October 2006 09:09, Robert Hancock wrote:
> Andi Kleen wrote:
> > Andi Kleen <[email protected]> writes:
> >
> >> I tested it on a NF4-Professional system with 8GB RAM and a single
> >> SATA disk. It first did nicely in LTP and some other tests,
> >> but during a bonnie++ run it eventually blocked with all
> >> IO hanging forever. No output either. I did a full backtrace
> >> and it just showed the processes waiting for a IO wakeup.
> >
> > Hmm, to follow myself up: after a few more minutes the machine recovered
> > and i could log in again (overall the stall was at least 5+ minutes
> > though)
> >
> > Not sure whom to blame, the IO driver might be actually innocent
> > and it just be one of the usual known but unfixed IO starvation problems.
> >
> > -Andi
>
> Hmm.. The system hanging up for 5 minutes
I've actually seen that before on different systems. Sometimes
under some IO loads writes can be really starved for that long
and they block the calling process. Normally it only happened
when a very slow IO device (like slow USB storage) was involved
e.g. typical trace:
sshd D ffff810001072b20 0 11554 3381 11556 11127 (NOTLB)
ffff810114dffb08 0000000000000086 5353535353535353 5353535353535353
5353535353535353 000000000000057e ffff81014b344af0 ffff81014b404770
000001ede41c7140 ffff81014b344cc8 5353535300000001 5353535353535353
Call Trace:
[<ffffffff802e8cc2>] start_this_handle+0x2f4/0x37b
[<ffffffff802e8e16>] journal_start+0xcd/0x105
[<ffff81014b11e800>]
DWARF2 unwinder stuck at 0xffff81014b11e800
Leftover inexact backtrace:
[<ffffffff802da5f5>] ext3_dirty_inode+0x28/0x7b
[<ffffffff80291bbb>] __mark_inode_dirty+0x2c/0x17d
[<ffffffff80256611>] do_generic_mapping_read+0x3b0/0x3c2
[<ffffffff80255415>] file_read_actor+0x0/0xd6
[<ffffffff80256d8b>] generic_file_aio_read+0x164/0x1b8
[<ffffffff80278774>] do_sync_read+0xc9/0x10c
[<ffffffff80241ecc>] autoremove_wake_function+0x0/0x2e
[<ffffffff80531aef>] cond_resched+0x34/0x3b
[<ffffffff80258f27>] __alloc_pages+0x5e/0x2ae
[<ffffffff8027365a>] cache_alloc_refill+0xf1/0x1f8
[<ffffffff80278ade>] vfs_read+0xa8/0x14e
[<ffffffff8027bbbd>] kernel_read+0x38/0x4c
[<ffffffff8027d6d4>] do_execve+0x105/0x1f9
[<ffffffff80207bc9>] sys_execve+0x33/0x8b
[<ffffffff80209857>] stub_execve+0x67/0xb0
I've got quite a lot of processes in journal_start -> start_this_handle.
I suppose they're waiting for the transaction to finish.
> and then recovering seems
> rather odd, as far as I know the timeouts in libata are all quite a bit
> shorter than that. Was there anything unusual in dmesg?
Nothing in dmesg except for the sysrqs I triggered.
> If the IO
> commands weren't completing at the driver level then I would expect the
> error handling to kick in in some fashion..
And print something, yes.
I assume it wasn't the driver for now.
Thanks for your work.
-Andi
Andi Kleen wrote:
>> Hmm.. The system hanging up for 5 minutes
>
> I've actually seen that before on different systems. Sometimes
> under some IO loads writes can be really starved for that long
> and they block the calling process. Normally it only happened
> when a very slow IO device (like slow USB storage) was involved
>
> e.g. typical trace:
>
> sshd D ffff810001072b20 0 11554 3381 11556 11127 (NOTLB)
> ffff810114dffb08 0000000000000086 5353535353535353 5353535353535353
> 5353535353535353 000000000000057e ffff81014b344af0 ffff81014b404770
> 000001ede41c7140 ffff81014b344cc8 5353535300000001 5353535353535353
> Call Trace:
> [<ffffffff802e8cc2>] start_this_handle+0x2f4/0x37b
> [<ffffffff802e8e16>] journal_start+0xcd/0x105
> [<ffff81014b11e800>]
> DWARF2 unwinder stuck at 0xffff81014b11e800
> Leftover inexact backtrace:
> [<ffffffff802da5f5>] ext3_dirty_inode+0x28/0x7b
> [<ffffffff80291bbb>] __mark_inode_dirty+0x2c/0x17d
> [<ffffffff80256611>] do_generic_mapping_read+0x3b0/0x3c2
> [<ffffffff80255415>] file_read_actor+0x0/0xd6
> [<ffffffff80256d8b>] generic_file_aio_read+0x164/0x1b8
> [<ffffffff80278774>] do_sync_read+0xc9/0x10c
> [<ffffffff80241ecc>] autoremove_wake_function+0x0/0x2e
> [<ffffffff80531aef>] cond_resched+0x34/0x3b
> [<ffffffff80258f27>] __alloc_pages+0x5e/0x2ae
> [<ffffffff8027365a>] cache_alloc_refill+0xf1/0x1f8
> [<ffffffff80278ade>] vfs_read+0xa8/0x14e
> [<ffffffff8027bbbd>] kernel_read+0x38/0x4c
> [<ffffffff8027d6d4>] do_execve+0x105/0x1f9
> [<ffffffff80207bc9>] sys_execve+0x33/0x8b
> [<ffffffff80209857>] stub_execve+0x67/0xb0
>
>
> I've got quite a lot of processes in journal_start -> start_this_handle.
> I suppose they're waiting for the transaction to finish.
It could be that with 8GB of RAM you've got a ton of buffered writes
piled up which the kernel has decided need to be written out and which
takes 5 minutes.. That amount of time seems a bit extreme to be blocking
other IO, though..
--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from [email protected]
Home Page: http://www.roberthancock.com/
--- linux-2.6.19-rc2/drivers/ata/sata_nv.c 2006-10-16 18:04:44.000000000 -0600
+++ linux-2.6.19-rc2-admatest/drivers/ata/sata_nv.c 2006-10-22 18:59:19.000000000 -0600
@@ -29,6 +29,11 @@
* NV-specific details such as register offsets, SATA phy location,
* hotplug info, etc.
*
+ * CK804/MCP04 controllers support an alternate programming interface
+ * similar to the ADMA specification (with some modifications).
+ * This allows the use of NCQ. Non-DMA-mapped ATA commands are still
+ * sent through the legacy interface.
+ *
*/
#include <linux/kernel.h>
@@ -40,10 +45,13 @@
#include <linux/interrupt.h>
#include <linux/device.h>
#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
#include <linux/libata.h>
#define DRV_NAME "sata_nv"
-#define DRV_VERSION "2.0"
+#define DRV_VERSION "3.0"
+
+#define NV_ADMA_DMA_BOUNDARY 0xffffffffUL
enum {
NV_PORTS = 2,
@@ -78,8 +86,139 @@ enum {
// For PCI config register 20
NV_MCP_SATA_CFG_20 = 0x50,
NV_MCP_SATA_CFG_20_SATA_SPACE_EN = 0x04,
+ NV_MCP_SATA_CFG_20_PORT0_EN = (1 << 17),
+ NV_MCP_SATA_CFG_20_PORT1_EN = (1 << 16),
+ NV_MCP_SATA_CFG_20_PORT0_PWB_EN = (1 << 14),
+ NV_MCP_SATA_CFG_20_PORT1_PWB_EN = (1 << 12),
+
+ NV_ADMA_MAX_CPBS = 32,
+ NV_ADMA_CPB_SZ = 128,
+ NV_ADMA_APRD_SZ = 16,
+ NV_ADMA_SGTBL_LEN = (1024 - NV_ADMA_CPB_SZ) /
+ NV_ADMA_APRD_SZ,
+ NV_ADMA_SGTBL_TOTAL_LEN = NV_ADMA_SGTBL_LEN + 5,
+ NV_ADMA_SGTBL_SZ = NV_ADMA_SGTBL_LEN * NV_ADMA_APRD_SZ,
+ NV_ADMA_PORT_PRIV_DMA_SZ = NV_ADMA_MAX_CPBS *
+ (NV_ADMA_CPB_SZ + NV_ADMA_SGTBL_SZ),
+
+ /* BAR5 offset to ADMA general registers */
+ NV_ADMA_GEN = 0x400,
+ NV_ADMA_GEN_CTL = 0x00,
+ NV_ADMA_NOTIFIER_CLEAR = 0x30,
+
+ /* BAR5 offset to ADMA ports */
+ NV_ADMA_PORT = 0x480,
+
+ /* size of ADMA port register space */
+ NV_ADMA_PORT_SIZE = 0x100,
+
+ /* ADMA port registers */
+ NV_ADMA_CTL = 0x40,
+ NV_ADMA_CPB_COUNT = 0x42,
+ NV_ADMA_NEXT_CPB_IDX = 0x43,
+ NV_ADMA_STAT = 0x44,
+ NV_ADMA_CPB_BASE_LOW = 0x48,
+ NV_ADMA_CPB_BASE_HIGH = 0x4C,
+ NV_ADMA_APPEND = 0x50,
+ NV_ADMA_NOTIFIER = 0x68,
+ NV_ADMA_NOTIFIER_ERROR = 0x6C,
+
+ /* NV_ADMA_CTL register bits */
+ NV_ADMA_CTL_HOTPLUG_IEN = (1 << 0),
+ NV_ADMA_CTL_CHANNEL_RESET = (1 << 5),
+ NV_ADMA_CTL_GO = (1 << 7),
+ NV_ADMA_CTL_AIEN = (1 << 8),
+ NV_ADMA_CTL_READ_NON_COHERENT = (1 << 11),
+ NV_ADMA_CTL_WRITE_NON_COHERENT = (1 << 12),
+
+ /* CPB response flag bits */
+ NV_CPB_RESP_DONE = (1 << 0),
+ NV_CPB_RESP_ATA_ERR = (1 << 3),
+ NV_CPB_RESP_CMD_ERR = (1 << 4),
+ NV_CPB_RESP_CPB_ERR = (1 << 7),
+
+ /* CPB control flag bits */
+ NV_CPB_CTL_CPB_VALID = (1 << 0),
+ NV_CPB_CTL_QUEUE = (1 << 1),
+ NV_CPB_CTL_APRD_VALID = (1 << 2),
+ NV_CPB_CTL_IEN = (1 << 3),
+ NV_CPB_CTL_FPDMA = (1 << 4),
+
+ /* APRD flags */
+ NV_APRD_WRITE = (1 << 1),
+ NV_APRD_END = (1 << 2),
+ NV_APRD_CONT = (1 << 3),
+
+ /* NV_ADMA_STAT flags */
+ NV_ADMA_STAT_TIMEOUT = (1 << 0),
+ NV_ADMA_STAT_HOTUNPLUG = (1 << 1),
+ NV_ADMA_STAT_HOTPLUG = (1 << 2),
+ NV_ADMA_STAT_CPBERR = (1 << 4),
+ NV_ADMA_STAT_SERROR = (1 << 5),
+ NV_ADMA_STAT_CMD_COMPLETE = (1 << 6),
+ NV_ADMA_STAT_IDLE = (1 << 8),
+ NV_ADMA_STAT_LEGACY = (1 << 9),
+ NV_ADMA_STAT_STOPPED = (1 << 10),
+ NV_ADMA_STAT_DONE = (1 << 12),
+ NV_ADMA_STAT_ERR = NV_ADMA_STAT_CPBERR |
+ NV_ADMA_STAT_TIMEOUT,
+
+ /* port flags */
+ NV_ADMA_PORT_REGISTER_MODE = (1 << 0),
+
+};
+
+/* ADMA Physical Region Descriptor - one SG segment */
+struct nv_adma_prd {
+ __le64 addr;
+ __le32 len;
+ u8 flags;
+ u8 packet_len;
+ __le16 reserved;
+};
+
+enum nv_adma_regbits {
+ CMDEND = (1 << 15), /* end of command list */
+ WNB = (1 << 14), /* wait-not-BSY */
+ IGN = (1 << 13), /* ignore this entry */
+ CS1n = (1 << (4 + 8)), /* std. PATA signals follow... */
+ DA2 = (1 << (2 + 8)),
+ DA1 = (1 << (1 + 8)),
+ DA0 = (1 << (0 + 8)),
};
+/* ADMA Command Parameter Block
+ The first 5 SG segments are stored inside the Command Parameter Block itself.
+ If there are more than 5 segments the remainder are stored in a separate
+ memory area indicated by next_aprd. */
+struct nv_adma_cpb {
+ u8 resp_flags; /* 0 */
+ u8 reserved1; /* 1 */
+ u8 ctl_flags; /* 2 */
+ /* len is length of taskfile in 64 bit words */
+ u8 len; /* 3 */
+ u8 tag; /* 4 */
+ u8 next_cpb_idx; /* 5 */
+ __le16 reserved2; /* 6-7 */
+ __le16 tf[12]; /* 8-31 */
+ struct nv_adma_prd aprd[5]; /* 32-111 */
+ __le64 next_aprd; /* 112-119 */
+ __le64 reserved3; /* 120-127 */
+};
+
+
+struct nv_adma_port_priv {
+ struct nv_adma_cpb *cpb;
+ dma_addr_t cpb_dma;
+ struct nv_adma_prd *aprd;
+ dma_addr_t aprd_dma;
+ u8 flags;
+ u32 notifier;
+ u32 notifier_error;
+};
+
+#define NV_ADMA_CHECK_INTR(GCTL, PORT) ((GCTL) & ( 1 << (19 + (12 * (PORT)))))
+
static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
static void nv_ck804_host_stop(struct ata_host *host);
static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance);
@@ -93,13 +232,27 @@ static void nv_nf2_thaw(struct ata_port
static void nv_ck804_freeze(struct ata_port *ap);
static void nv_ck804_thaw(struct ata_port *ap);
static void nv_error_handler(struct ata_port *ap);
+static int nv_adma_slave_config(struct scsi_device *sdev);
+static void nv_adma_qc_prep(struct ata_queued_cmd *qc);
+static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc);
+static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance);
+static void nv_adma_irq_clear(struct ata_port *ap);
+static int nv_adma_port_start(struct ata_port *ap);
+static void nv_adma_port_stop(struct ata_port *ap);
+static void nv_adma_error_handler(struct ata_port *ap);
+static void nv_adma_host_stop(struct ata_host *host);
+static void nv_adma_bmdma_setup(struct ata_queued_cmd *qc);
+static void nv_adma_bmdma_start(struct ata_queued_cmd *qc);
+static void nv_adma_bmdma_stop(struct ata_queued_cmd *qc);
+static u8 nv_adma_bmdma_status(struct ata_port *ap);
enum nv_host_type
{
GENERIC,
NFORCE2,
NFORCE3 = NFORCE2, /* NF2 == NF3 as far as sata_nv is concerned */
- CK804
+ CK804,
+ ADMA
};
static const struct pci_device_id nv_pci_tbl[] = {
@@ -156,6 +309,25 @@ static struct scsi_host_template nv_sht
.bios_param = ata_std_bios_param,
};
+static struct scsi_host_template nv_adma_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = NV_ADMA_MAX_CPBS,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = NV_ADMA_DMA_BOUNDARY,
+ .slave_configure = nv_adma_slave_config,
+ .slave_destroy = ata_scsi_slave_destroy,
+ .bios_param = ata_std_bios_param,
+};
+
static const struct ata_port_operations nv_generic_ops = {
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
@@ -237,6 +409,33 @@ static const struct ata_port_operations
.host_stop = nv_ck804_host_stop,
};
+static const struct ata_port_operations nv_adma_ops = {
+ .port_disable = ata_port_disable,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .exec_command = ata_exec_command,
+ .check_status = ata_check_status,
+ .dev_select = ata_std_dev_select,
+ .bmdma_setup = nv_adma_bmdma_setup,
+ .bmdma_start = nv_adma_bmdma_start,
+ .bmdma_stop = nv_adma_bmdma_stop,
+ .bmdma_status = nv_adma_bmdma_status,
+ .qc_prep = nv_adma_qc_prep,
+ .qc_issue = nv_adma_qc_issue,
+ .freeze = nv_ck804_freeze,
+ .thaw = nv_ck804_thaw,
+ .error_handler = nv_adma_error_handler,
+ .post_internal_cmd = nv_adma_bmdma_stop,
+ .data_xfer = ata_mmio_data_xfer,
+ .irq_handler = nv_adma_interrupt,
+ .irq_clear = nv_adma_irq_clear,
+ .scr_read = nv_scr_read,
+ .scr_write = nv_scr_write,
+ .port_start = nv_adma_port_start,
+ .port_stop = nv_adma_port_stop,
+ .host_stop = nv_adma_host_stop,
+};
+
static struct ata_port_info nv_port_info[] = {
/* generic */
{
@@ -265,6 +464,16 @@ static struct ata_port_info nv_port_info
.udma_mask = NV_UDMA_MASK,
.port_ops = &nv_ck804_ops,
},
+ /* ADMA */
+ {
+ .sht = &nv_adma_sht,
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO | ATA_FLAG_NCQ,
+ .pio_mask = NV_PIO_MASK,
+ .mwdma_mask = NV_MWDMA_MASK,
+ .udma_mask = NV_UDMA_MASK,
+ .port_ops = &nv_adma_ops,
+ },
};
MODULE_AUTHOR("NVIDIA");
@@ -273,6 +482,616 @@ MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, nv_pci_tbl);
MODULE_VERSION(DRV_VERSION);
+static int adma_enabled = 1;
+
+static int nv_adma_slave_config(struct scsi_device *sdev)
+{
+ struct ata_port *ap = ata_shost_to_port(sdev->host);
+ u64 bounce_limit;
+ unsigned long segment_boundary;
+ unsigned short sg_tablesize;
+ int rc;
+
+ rc = ata_scsi_slave_config(sdev);
+
+ if (sdev->id >= ATA_MAX_DEVICES || sdev->channel || sdev->lun)
+ /* Not a proper libata device, ignore */
+ return rc;
+
+ if (ap->device[sdev->id].class == ATA_DEV_ATAPI) {
+ /*
+ * NVIDIA reports that ADMA mode does not support ATAPI commands.
+ * Therefore ATAPI commands are sent through the legacy interface.
+ * However, the legacy interface only supports 32-bit DMA.
+ * Restrict DMA parameters as required by the legacy interface
+ * when an ATAPI device is connected.
+ */
+ bounce_limit = ATA_DMA_MASK;
+ segment_boundary = ATA_DMA_BOUNDARY;
+ /* Subtract 1 since an extra entry may be needed for padding, see
+ libata-scsi.c */
+ sg_tablesize = LIBATA_MAX_PRD - 1;
+ }
+ else {
+ bounce_limit = *ap->dev->dma_mask;
+ segment_boundary = NV_ADMA_DMA_BOUNDARY;
+ sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN;
+ }
+
+ blk_queue_bounce_limit(sdev->request_queue, bounce_limit);
+ blk_queue_segment_boundary(sdev->request_queue, segment_boundary);
+ blk_queue_max_hw_segments(sdev->request_queue, sg_tablesize);
+ ata_port_printk(ap, KERN_INFO,
+ "bounce limit 0x%llX, segment boundary 0x%lX, hw segs %hu\n",
+ (unsigned long long)bounce_limit, segment_boundary, sg_tablesize);
+ return rc;
+}
+
+static unsigned int nv_adma_tf_to_cpb(struct ata_taskfile *tf, u16 *cpb)
+{
+ unsigned int idx = 0;
+
+ cpb[idx++] = cpu_to_le16((ATA_REG_DEVICE << 8) | tf->device | WNB);
+
+ if ((tf->flags & ATA_TFLAG_LBA48) == 0) {
+ cpb[idx++] = cpu_to_le16(IGN);
+ cpb[idx++] = cpu_to_le16(IGN);
+ cpb[idx++] = cpu_to_le16(IGN);
+ cpb[idx++] = cpu_to_le16(IGN);
+ cpb[idx++] = cpu_to_le16(IGN);
+ }
+ else {
+ cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->hob_feature);
+ cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->hob_nsect);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAL << 8) | tf->hob_lbal);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAM << 8) | tf->hob_lbam);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->hob_lbah);
+ }
+ cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->feature);
+ cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->nsect);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAL << 8) | tf->lbal);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAM << 8) | tf->lbam);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->lbah);
+
+ cpb[idx++] = cpu_to_le16((ATA_REG_CMD << 8) | tf->command | CMDEND);
+
+ return idx;
+}
+
+static inline void __iomem *__nv_adma_ctl_block(void __iomem *mmio,
+ unsigned int port_no)
+{
+ mmio += NV_ADMA_PORT + port_no * NV_ADMA_PORT_SIZE;
+ return mmio;
+}
+
+static inline void __iomem *nv_adma_ctl_block(struct ata_port *ap)
+{
+ return __nv_adma_ctl_block(ap->host->mmio_base, ap->port_no);
+}
+
+static inline void __iomem *nv_adma_gen_block(struct ata_port *ap)
+{
+ return (ap->host->mmio_base + NV_ADMA_GEN);
+}
+
+static inline void __iomem *nv_adma_notifier_clear_block(struct ata_port *ap)
+{
+ return (nv_adma_gen_block(ap) + NV_ADMA_NOTIFIER_CLEAR + (4 * ap->port_no));
+}
+
+static void nv_adma_check_cpb(struct ata_port *ap, int cpb_num, int have_global_err)
+{
+ struct nv_adma_port_priv *pp = ap->private_data;
+ int complete = 0, have_err = 0;
+ u16 flags = pp->cpb[cpb_num].resp_flags;
+
+ VPRINTK("CPB %d, flags=0x%x\n", cpb_num, flags);
+
+ if (flags & NV_CPB_RESP_DONE) {
+ VPRINTK("CPB flags done, flags=0x%x\n", flags);
+ complete = 1;
+ }
+ if (flags & NV_CPB_RESP_ATA_ERR) {
+ ata_port_printk(ap, KERN_ERR, "CPB flags ATA err, flags=0x%x\n", flags);
+ have_err = 1;
+ complete = 1;
+ }
+ if (flags & NV_CPB_RESP_CMD_ERR) {
+ ata_port_printk(ap, KERN_ERR, "CPB flags CMD err, flags=0x%x\n", flags);
+ have_err = 1;
+ complete = 1;
+ }
+ if (flags & NV_CPB_RESP_CPB_ERR) {
+ ata_port_printk(ap, KERN_ERR, "CPB flags CPB err, flags=0x%x\n", flags);
+ have_err = 1;
+ complete = 1;
+ }
+ if(complete || have_global_err)
+ {
+ struct ata_queued_cmd *qc = ata_qc_from_tag(ap, cpb_num);
+ if(likely(qc)) {
+ u8 ata_status = 0;
+ /* Only use the ATA port status for non-NCQ commands.
+ For NCQ commands the current status may have nothing to do with
+ the command just completed. */
+ if(qc->tf.protocol != ATA_PROT_NCQ) {
+ ata_status = readb(nv_adma_ctl_block(ap) + (ATA_REG_STATUS * 4));
+ }
+
+ if(have_err || have_global_err || pp->notifier_error & (1 << cpb_num))
+ ata_status |= ATA_ERR;
+
+ qc->err_mask |= ac_err_mask(ata_status);
+ DPRINTK("Completing qc from tag %d with err_mask %u\n",cpb_num,
+ qc->err_mask);
+ ata_qc_complete(qc);
+ }
+ }
+}
+
+static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
+{
+ struct ata_host *host = dev_instance;
+ int i, handled = 0;
+
+ spin_lock(&host->lock);
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
+ struct nv_adma_port_priv *pp = ap->private_data;
+ void __iomem *mmio = nv_adma_ctl_block(ap);
+ u16 status;
+ u32 gen_ctl;
+ int have_global_err = 0;
+
+ /* if in ATA register mode, use standard ata interrupt handler */
+ if (pp->flags & NV_ADMA_PORT_REGISTER_MODE) {
+ struct ata_queued_cmd *qc;
+ VPRINTK("in ATA register mode\n");
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
+ handled += ata_host_intr(ap, qc);
+ else {
+ /* No request pending? Clear interrupt status
+ anyway, in case there's one pending. */
+ ap->ops->check_status(ap);
+ handled++;
+ }
+ continue;
+ }
+
+ pp->notifier = readl(mmio + NV_ADMA_NOTIFIER);
+ pp->notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
+ gen_ctl = readl(nv_adma_gen_block(ap) + NV_ADMA_GEN_CTL);
+
+ if( !NV_ADMA_CHECK_INTR(gen_ctl, ap->port_no) && !pp->notifier &&
+ !pp->notifier_error)
+ /* Nothing to do */
+ continue;
+
+ status = readw(mmio + NV_ADMA_STAT);
+
+ /* Clear status. Ensure the controller sees the clearing before we start
+ looking at any of the CPB statuses, so that any CPB completions after
+ this point in the handler will raise another interrupt. */
+ writew(status, mmio + NV_ADMA_STAT);
+ readw(mmio + NV_ADMA_STAT); /* flush posted write */
+ rmb();
+
+ /* freeze if hotplugged */
+ if (unlikely(status & (NV_ADMA_STAT_HOTPLUG | NV_ADMA_STAT_HOTUNPLUG))) {
+ ata_port_printk(ap, KERN_NOTICE, "Hotplug event, freezing\n");
+ ata_port_freeze(ap);
+ handled++;
+ continue;
+ }
+
+ if (status & NV_ADMA_STAT_TIMEOUT) {
+ ata_port_printk(ap, KERN_ERR, "timeout, stat=0x%x\n", status);
+ have_global_err = 1;
+ }
+ if (status & NV_ADMA_STAT_CPBERR) {
+ ata_port_printk(ap, KERN_ERR, "CPB error, stat=0x%x\n", status);
+ have_global_err = 1;
+ }
+ if ((status & NV_ADMA_STAT_DONE) || have_global_err) {
+ /** Check CPBs for completed commands */
+
+ if(ata_tag_valid(ap->active_tag))
+ /* Non-NCQ command */
+ nv_adma_check_cpb(ap, ap->active_tag, have_global_err);
+ else {
+ int pos;
+ u32 active = ap->sactive;
+ while( (pos = ffs(active)) ) {
+ pos--;
+ nv_adma_check_cpb(ap, pos, have_global_err);
+ active &= ~(1 << pos );
+ }
+ }
+ }
+
+ handled++; /* irq handled if we got here */
+ }
+ }
+
+ /* Clear notifiers. Yes, this does appear to have to be done at the very end,
+ otherwise things grind to a halt quite quickly. */
+ if (handled)
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+ struct nv_adma_port_priv *pp = ap->private_data;
+ writel(pp->notifier | pp->notifier_error,
+ nv_adma_notifier_clear_block(ap));
+ }
+
+ spin_unlock(&host->lock);
+
+ return IRQ_RETVAL(handled);
+}
+
+static void nv_adma_irq_clear(struct ata_port *ap)
+{
+ void __iomem *mmio = nv_adma_ctl_block(ap);
+ u16 status = readw(mmio + NV_ADMA_STAT);
+ u32 notifier = readl(mmio + NV_ADMA_NOTIFIER);
+ u32 notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
+
+ /* clear ADMA status */
+ writew(status, mmio + NV_ADMA_STAT);
+ writel(notifier | notifier_error,
+ nv_adma_notifier_clear_block(ap));
+
+ /** clear legacy status */
+ ap->flags &= ~ATA_FLAG_MMIO;
+ ata_bmdma_irq_clear(ap);
+ ap->flags |= ATA_FLAG_MMIO;
+}
+
+static void nv_adma_bmdma_setup(struct ata_queued_cmd *qc)
+{
+ struct nv_adma_port_priv *pp = qc->ap->private_data;
+
+ if(pp->flags & NV_ADMA_PORT_REGISTER_MODE) {
+ WARN_ON(1);
+ return;
+ }
+
+ qc->ap->flags &= ~ATA_FLAG_MMIO;
+ ata_bmdma_setup(qc);
+ qc->ap->flags |= ATA_FLAG_MMIO;
+}
+
+static void nv_adma_bmdma_start(struct ata_queued_cmd *qc)
+{
+ struct nv_adma_port_priv *pp = qc->ap->private_data;
+
+ if(pp->flags & NV_ADMA_PORT_REGISTER_MODE) {
+ WARN_ON(1);
+ return;
+ }
+
+ qc->ap->flags &= ~ATA_FLAG_MMIO;
+ ata_bmdma_start(qc);
+ qc->ap->flags |= ATA_FLAG_MMIO;
+}
+
+static void nv_adma_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ struct nv_adma_port_priv *pp = qc->ap->private_data;
+
+ if(pp->flags & NV_ADMA_PORT_REGISTER_MODE)
+ return;
+
+ qc->ap->flags &= ~ATA_FLAG_MMIO;
+ ata_bmdma_stop(qc);
+ qc->ap->flags |= ATA_FLAG_MMIO;
+}
+
+static u8 nv_adma_bmdma_status(struct ata_port *ap)
+{
+ u8 status;
+ struct nv_adma_port_priv *pp = ap->private_data;
+
+ WARN_ON(pp->flags & NV_ADMA_PORT_REGISTER_MODE);
+
+ ap->flags &= ~ATA_FLAG_MMIO;
+ status = ata_bmdma_status(ap);
+ ap->flags |= ATA_FLAG_MMIO;
+ return status;
+}
+
+static void nv_adma_register_mode(struct ata_port *ap)
+{
+ void __iomem *mmio = nv_adma_ctl_block(ap);
+ struct nv_adma_port_priv *pp = ap->private_data;
+ u16 tmp;
+
+ if (pp->flags & NV_ADMA_PORT_REGISTER_MODE)
+ return;
+
+ tmp = readw(mmio + NV_ADMA_CTL);
+ writew(tmp & ~NV_ADMA_CTL_GO, mmio + NV_ADMA_CTL);
+
+ pp->flags |= NV_ADMA_PORT_REGISTER_MODE;
+}
+
+static void nv_adma_mode(struct ata_port *ap)
+{
+ void __iomem *mmio = nv_adma_ctl_block(ap);
+ struct nv_adma_port_priv *pp = ap->private_data;
+ u16 tmp;
+
+ if (!(pp->flags & NV_ADMA_PORT_REGISTER_MODE))
+ return;
+
+ tmp = readw(mmio + NV_ADMA_CTL);
+ writew(tmp | NV_ADMA_CTL_GO, mmio + NV_ADMA_CTL);
+
+ pp->flags &= ~NV_ADMA_PORT_REGISTER_MODE;
+}
+
+static int nv_adma_port_start(struct ata_port *ap)
+{
+ struct device *dev = ap->host->dev;
+ struct nv_adma_port_priv *pp;
+ int rc;
+ void *mem;
+ dma_addr_t mem_dma;
+ void __iomem *mmio = nv_adma_ctl_block(ap);
+ u16 tmp;
+
+ VPRINTK("ENTER\n");
+
+ rc = ata_port_start(ap);
+ if (rc)
+ return rc;
+
+ pp = kzalloc(sizeof(*pp), GFP_KERNEL);
+ if (!pp) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
+
+ mem = dma_alloc_coherent(dev, NV_ADMA_PORT_PRIV_DMA_SZ,
+ &mem_dma, GFP_KERNEL);
+
+ if (!mem) {
+ rc = -ENOMEM;
+ goto err_out_kfree;
+ }
+ memset(mem, 0, NV_ADMA_PORT_PRIV_DMA_SZ);
+
+ /*
+ * First item in chunk of DMA memory:
+ * 128-byte command parameter block (CPB)
+ * one for each command tag
+ */
+ pp->cpb = mem;
+ pp->cpb_dma = mem_dma;
+
+ writel(mem_dma & 0xFFFFFFFF, mmio + NV_ADMA_CPB_BASE_LOW);
+ writel((mem_dma >> 16 ) >> 16, mmio + NV_ADMA_CPB_BASE_HIGH);
+
+ mem += NV_ADMA_MAX_CPBS * NV_ADMA_CPB_SZ;
+ mem_dma += NV_ADMA_MAX_CPBS * NV_ADMA_CPB_SZ;
+
+ /*
+ * Second item: block of ADMA_SGTBL_LEN s/g entries
+ */
+ pp->aprd = mem;
+ pp->aprd_dma = mem_dma;
+
+ ap->private_data = pp;
+
+ /* clear any outstanding interrupt conditions */
+ writew(0xffff, mmio + NV_ADMA_STAT);
+
+ /* initialize port variables */
+ pp->flags = NV_ADMA_PORT_REGISTER_MODE;
+
+ /* clear CPB fetch count */
+ writew(0, mmio + NV_ADMA_CPB_COUNT);
+
+ /* clear GO for register mode */
+ tmp = readw(mmio + NV_ADMA_CTL);
+ writew(tmp & ~NV_ADMA_CTL_GO, mmio + NV_ADMA_CTL);
+
+ tmp = readw(mmio + NV_ADMA_CTL);
+ writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
+ readl( mmio + NV_ADMA_CTL ); /* flush posted write */
+ udelay(1);
+ writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
+ readl( mmio + NV_ADMA_CTL ); /* flush posted write */
+
+ return 0;
+
+err_out_kfree:
+ kfree(pp);
+err_out:
+ ata_port_stop(ap);
+ return rc;
+}
+
+static void nv_adma_port_stop(struct ata_port *ap)
+{
+ struct device *dev = ap->host->dev;
+ struct nv_adma_port_priv *pp = ap->private_data;
+ void __iomem *mmio = nv_adma_ctl_block(ap);
+
+ VPRINTK("ENTER\n");
+
+ writew(0, mmio + NV_ADMA_CTL);
+
+ ap->private_data = NULL;
+ dma_free_coherent(dev, NV_ADMA_PORT_PRIV_DMA_SZ, pp->cpb, pp->cpb_dma);
+ kfree(pp);
+ ata_port_stop(ap);
+}
+
+
+static void nv_adma_setup_port(struct ata_probe_ent *probe_ent, unsigned int port)
+{
+ void __iomem *mmio = probe_ent->mmio_base;
+ struct ata_ioports *ioport = &probe_ent->port[port];
+
+ VPRINTK("ENTER\n");
+
+ mmio += NV_ADMA_PORT + port * NV_ADMA_PORT_SIZE;
+
+ ioport->cmd_addr = (unsigned long) mmio;
+ ioport->data_addr = (unsigned long) mmio + (ATA_REG_DATA * 4);
+ ioport->error_addr =
+ ioport->feature_addr = (unsigned long) mmio + (ATA_REG_ERR * 4);
+ ioport->nsect_addr = (unsigned long) mmio + (ATA_REG_NSECT * 4);
+ ioport->lbal_addr = (unsigned long) mmio + (ATA_REG_LBAL * 4);
+ ioport->lbam_addr = (unsigned long) mmio + (ATA_REG_LBAM * 4);
+ ioport->lbah_addr = (unsigned long) mmio + (ATA_REG_LBAH * 4);
+ ioport->device_addr = (unsigned long) mmio + (ATA_REG_DEVICE * 4);
+ ioport->status_addr =
+ ioport->command_addr = (unsigned long) mmio + (ATA_REG_STATUS * 4);
+ ioport->altstatus_addr =
+ ioport->ctl_addr = (unsigned long) mmio + 0x20;
+}
+
+static int nv_adma_host_init(struct ata_probe_ent *probe_ent)
+{
+ struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
+ unsigned int i;
+ u32 tmp32;
+
+ VPRINTK("ENTER\n");
+
+ /* enable ADMA on the ports */
+ pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, &tmp32);
+ tmp32 |= NV_MCP_SATA_CFG_20_PORT0_EN |
+ NV_MCP_SATA_CFG_20_PORT0_PWB_EN |
+ NV_MCP_SATA_CFG_20_PORT1_EN |
+ NV_MCP_SATA_CFG_20_PORT1_PWB_EN;
+
+ pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32);
+
+ for (i = 0; i < probe_ent->n_ports; i++)
+ nv_adma_setup_port(probe_ent, i);
+
+ for (i = 0; i < probe_ent->n_ports; i++) {
+ void __iomem *mmio = __nv_adma_ctl_block(probe_ent->mmio_base, i);
+ u16 tmp;
+
+ /* enable interrupt, clear reset if not already clear */
+ tmp = readw(mmio + NV_ADMA_CTL);
+ writew(tmp | NV_ADMA_CTL_AIEN, mmio + NV_ADMA_CTL);
+ }
+
+ return 0;
+}
+
+static void nv_adma_fill_aprd(struct ata_queued_cmd *qc,
+ struct scatterlist *sg,
+ int idx,
+ struct nv_adma_prd *aprd)
+{
+ u32 flags;
+
+ memset(aprd, 0, sizeof(struct nv_adma_prd));
+
+ flags = 0;
+ if (qc->tf.flags & ATA_TFLAG_WRITE)
+ flags |= NV_APRD_WRITE;
+ if (idx == qc->n_elem - 1)
+ flags |= NV_APRD_END;
+ else if (idx != 4)
+ flags |= NV_APRD_CONT;
+
+ aprd->addr = cpu_to_le64(((u64)sg_dma_address(sg)));
+ aprd->len = cpu_to_le32(((u32)sg_dma_len(sg))); /* len in bytes */
+ aprd->flags = cpu_to_le32(flags);
+}
+
+static void nv_adma_fill_sg(struct ata_queued_cmd *qc, struct nv_adma_cpb *cpb)
+{
+ struct nv_adma_port_priv *pp = qc->ap->private_data;
+ unsigned int idx;
+ struct nv_adma_prd *aprd;
+ struct scatterlist *sg;
+
+ VPRINTK("ENTER\n");
+
+ idx = 0;
+
+ ata_for_each_sg(sg, qc) {
+ aprd = (idx < 5) ? &cpb->aprd[idx] : &pp->aprd[NV_ADMA_SGTBL_LEN * qc->tag + (idx-5)];
+ nv_adma_fill_aprd(qc, sg, idx, aprd);
+ idx++;
+ }
+ if (idx > 5)
+ cpb->next_aprd = cpu_to_le64(((u64)(pp->aprd_dma + NV_ADMA_SGTBL_SZ * qc->tag)));
+}
+
+static void nv_adma_qc_prep(struct ata_queued_cmd *qc)
+{
+ struct nv_adma_port_priv *pp = qc->ap->private_data;
+ struct nv_adma_cpb *cpb = &pp->cpb[qc->tag];
+ u8 ctl_flags = NV_CPB_CTL_CPB_VALID |
+ NV_CPB_CTL_APRD_VALID |
+ NV_CPB_CTL_IEN;
+
+ VPRINTK("qc->flags = 0x%lx\n", qc->flags);
+
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP) ||
+ qc->tf.protocol == ATA_PROT_ATAPI_DMA) {
+ ata_qc_prep(qc);
+ return;
+ }
+
+ memset(cpb, 0, sizeof(struct nv_adma_cpb));
+
+ cpb->len = 3;
+ cpb->tag = qc->tag;
+ cpb->next_cpb_idx = 0;
+
+ /* turn on NCQ flags for NCQ commands */
+ if (qc->tf.protocol == ATA_PROT_NCQ)
+ ctl_flags |= NV_CPB_CTL_QUEUE | NV_CPB_CTL_FPDMA;
+
+ nv_adma_tf_to_cpb(&qc->tf, cpb->tf);
+
+ nv_adma_fill_sg(qc, cpb);
+
+ /* Be paranoid and don't let the device see NV_CPB_CTL_CPB_VALID until we are
+ finished filling in all of the contents */
+ wmb();
+ cpb->ctl_flags = ctl_flags;
+}
+
+static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc)
+{
+ void __iomem *mmio = nv_adma_ctl_block(qc->ap);
+
+ VPRINTK("ENTER\n");
+
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP) ||
+ qc->tf.protocol == ATA_PROT_ATAPI_DMA) {
+ /* use ATA register mode */
+ VPRINTK("no dmamap or ATAPI, using ATA register mode: 0x%lx\n", qc->flags);
+ nv_adma_register_mode(qc->ap);
+ return ata_qc_issue_prot(qc);
+ } else
+ nv_adma_mode(qc->ap);
+
+ /* write append register, command tag in lower 8 bits
+ and (number of cpbs to append -1) in top 8 bits */
+ wmb();
+ writew(qc->tag, mmio + NV_ADMA_APPEND);
+
+ DPRINTK("Issued tag %u\n",qc->tag);
+
+ return 0;
+}
+
static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
@@ -462,6 +1281,56 @@ static void nv_error_handler(struct ata_
nv_hardreset, ata_std_postreset);
}
+static void nv_adma_error_handler(struct ata_port *ap)
+{
+ struct nv_adma_port_priv *pp = ap->private_data;
+ if(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) {
+ void __iomem *mmio = nv_adma_ctl_block(ap);
+ int i;
+ u16 tmp;
+
+ u32 notifier = readl(mmio + NV_ADMA_NOTIFIER);
+ u32 notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
+ u32 gen_ctl = readl(nv_adma_gen_block(ap) + NV_ADMA_GEN_CTL);
+ u32 status = readw(mmio + NV_ADMA_STAT);
+
+ ata_port_printk(ap, KERN_ERR, "EH in ADMA mode, notifier 0x%X "
+ "notifier_error 0x%X gen_ctl 0x%X status 0x%X\n",
+ notifier, notifier_error, gen_ctl, status);
+
+ for( i=0;i<NV_ADMA_MAX_CPBS;i++) {
+ struct nv_adma_cpb *cpb = &pp->cpb[i];
+ if( cpb->ctl_flags || cpb->resp_flags )
+ ata_port_printk(ap, KERN_ERR,
+ "CPB %d: ctl_flags 0x%x, resp_flags 0x%x\n",
+ i, cpb->ctl_flags, cpb->resp_flags);
+ }
+
+ /* Push us back into port register mode for error handling. */
+ nv_adma_register_mode(ap);
+
+ ata_port_printk(ap, KERN_ERR, "Resetting port\n");
+
+ /* Mark all of the CPBs as invalid to prevent them from being executed */
+ for( i=0;i<NV_ADMA_MAX_CPBS;i++)
+ pp->cpb[i].ctl_flags &= ~NV_CPB_CTL_CPB_VALID;
+
+ /* clear CPB fetch count */
+ writew(0, mmio + NV_ADMA_CPB_COUNT);
+
+ /* Reset channel */
+ tmp = readw(mmio + NV_ADMA_CTL);
+ writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
+ readl( mmio + NV_ADMA_CTL ); /* flush posted write */
+ udelay(1);
+ writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
+ readl( mmio + NV_ADMA_CTL ); /* flush posted write */
+ }
+
+ ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
+ nv_hardreset, ata_std_postreset);
+}
+
static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version = 0;
@@ -471,6 +1340,8 @@ static int nv_init_one (struct pci_dev *
int rc;
u32 bar;
unsigned long base;
+ unsigned long type = ent->driver_data;
+ int mask_set = 0;
// Make sure this is a SATA controller by counting the number of bars
// (NVIDIA SATA controllers will always have six bars). Otherwise,
@@ -479,9 +1350,9 @@ static int nv_init_one (struct pci_dev *
if (pci_resource_start(pdev, bar) == 0)
return -ENODEV;
- if (!printed_version++)
+ if ( !printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
-
+
rc = pci_enable_device(pdev);
if (rc)
goto err_out;
@@ -492,16 +1363,26 @@ static int nv_init_one (struct pci_dev *
goto err_out_disable;
}
- rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
- if (rc)
- goto err_out_regions;
- rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
- if (rc)
- goto err_out_regions;
+ if(type >= CK804 && adma_enabled) {
+ dev_printk(KERN_NOTICE, &pdev->dev, "Using ADMA mode\n");
+ type = ADMA;
+ if(!pci_set_dma_mask(pdev, DMA_64BIT_MASK) &&
+ !pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))
+ mask_set = 1;
+ }
+
+ if(!mask_set) {
+ rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ goto err_out_regions;
+ rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ goto err_out_regions;
+ }
rc = -ENOMEM;
- ppi[0] = ppi[1] = &nv_port_info[ent->driver_data];
+ ppi[0] = ppi[1] = &nv_port_info[type];
probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
if (!probe_ent)
goto err_out_regions;
@@ -518,7 +1399,7 @@ static int nv_init_one (struct pci_dev *
probe_ent->port[1].scr_addr = base + NV_PORT1_SCR_REG_OFFSET;
/* enable SATA space for CK804 */
- if (ent->driver_data == CK804) {
+ if (type >= CK804) {
u8 regval;
pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val);
@@ -528,6 +1409,12 @@ static int nv_init_one (struct pci_dev *
pci_set_master(pdev);
+ if (type == ADMA) {
+ rc = nv_adma_host_init(probe_ent);
+ if (rc)
+ goto err_out_iounmap;
+ }
+
rc = ata_device_add(probe_ent);
if (rc != NV_PORTS)
goto err_out_iounmap;
@@ -562,6 +1449,33 @@ static void nv_ck804_host_stop(struct at
ata_pci_host_stop(host);
}
+static void nv_adma_host_stop(struct ata_host *host)
+{
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+ int i;
+ u32 tmp32;
+
+ for (i = 0; i < host->n_ports; i++) {
+ void __iomem *mmio = __nv_adma_ctl_block(host->mmio_base, i);
+ u16 tmp;
+
+ /* disable interrupt */
+ tmp = readw(mmio + NV_ADMA_CTL);
+ writew(tmp & ~NV_ADMA_CTL_AIEN, mmio + NV_ADMA_CTL);
+ }
+
+ /* disable ADMA on the ports */
+ pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, &tmp32);
+ tmp32 &= ~(NV_MCP_SATA_CFG_20_PORT0_EN |
+ NV_MCP_SATA_CFG_20_PORT0_PWB_EN |
+ NV_MCP_SATA_CFG_20_PORT1_EN |
+ NV_MCP_SATA_CFG_20_PORT1_PWB_EN);
+
+ pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32);
+
+ nv_ck804_host_stop(host);
+}
+
static int __init nv_init(void)
{
return pci_register_driver(&nv_pci_driver);
@@ -574,3 +1488,5 @@ static void __exit nv_exit(void)
module_init(nv_init);
module_exit(nv_exit);
+module_param_named(adma, adma_enabled, bool, 0444);
+MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: false)");
diff -rup --exclude='*.o' --exclude='*mod.c' --exclude='*.cmd' --exclude='*.ko' linux-2.6.19-rc3/drivers/ata/libata-sff.c linux-2.6.19-rc3-adma/drivers/ata/libata-sff.c
--- linux-2.6.19-rc3/drivers/ata/libata-sff.c 2006-10-23 21:11:25.000000000 -0600
+++ linux-2.6.19-rc3-adma/drivers/ata/libata-sff.c 2006-10-23 21:13:55.000000000 -0600
@@ -732,7 +732,7 @@ void ata_bmdma_drive_eh(struct ata_port
qc->tf.protocol == ATA_PROT_ATAPI_DMA)) {
u8 host_stat;
- host_stat = ata_bmdma_status(ap);
+ host_stat = ap->ops->bmdma_status(ap);
ata_ehi_push_desc(&ehc->i, "BMDMA stat 0x%x", host_stat);
diff -rup --exclude='*.o' --exclude='*mod.c' --exclude='*.cmd' --exclude='*.ko' linux-2.6.19-rc3/drivers/ata/sata_nv.c linux-2.6.19-rc3-adma/drivers/ata/sata_nv.c
--- linux-2.6.19-rc3/drivers/ata/sata_nv.c 2006-10-23 21:11:25.000000000 -0600
+++ linux-2.6.19-rc3-adma/drivers/ata/sata_nv.c 2006-10-25 21:30:22.000000000 -0600
@@ -29,6 +29,11 @@
* NV-specific details such as register offsets, SATA phy location,
* hotplug info, etc.
*
+ * CK804/MCP04 controllers support an alternate programming interface
+ * similar to the ADMA specification (with some modifications).
+ * This allows the use of NCQ. Non-DMA-mapped ATA commands are still
+ * sent through the legacy interface.
+ *
*/
#include <linux/kernel.h>
@@ -40,10 +45,13 @@
#include <linux/interrupt.h>
#include <linux/device.h>
#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
#include <linux/libata.h>
#define DRV_NAME "sata_nv"
-#define DRV_VERSION "2.0"
+#define DRV_VERSION "3.1"
+
+#define NV_ADMA_DMA_BOUNDARY 0xffffffffUL
enum {
NV_PORTS = 2,
@@ -78,8 +86,137 @@ enum {
// For PCI config register 20
NV_MCP_SATA_CFG_20 = 0x50,
NV_MCP_SATA_CFG_20_SATA_SPACE_EN = 0x04,
+ NV_MCP_SATA_CFG_20_PORT0_EN = (1 << 17),
+ NV_MCP_SATA_CFG_20_PORT1_EN = (1 << 16),
+ NV_MCP_SATA_CFG_20_PORT0_PWB_EN = (1 << 14),
+ NV_MCP_SATA_CFG_20_PORT1_PWB_EN = (1 << 12),
+
+ NV_ADMA_MAX_CPBS = 32,
+ NV_ADMA_CPB_SZ = 128,
+ NV_ADMA_APRD_SZ = 16,
+ NV_ADMA_SGTBL_LEN = (1024 - NV_ADMA_CPB_SZ) /
+ NV_ADMA_APRD_SZ,
+ NV_ADMA_SGTBL_TOTAL_LEN = NV_ADMA_SGTBL_LEN + 5,
+ NV_ADMA_SGTBL_SZ = NV_ADMA_SGTBL_LEN * NV_ADMA_APRD_SZ,
+ NV_ADMA_PORT_PRIV_DMA_SZ = NV_ADMA_MAX_CPBS *
+ (NV_ADMA_CPB_SZ + NV_ADMA_SGTBL_SZ),
+
+ /* BAR5 offset to ADMA general registers */
+ NV_ADMA_GEN = 0x400,
+ NV_ADMA_GEN_CTL = 0x00,
+ NV_ADMA_NOTIFIER_CLEAR = 0x30,
+
+ /* BAR5 offset to ADMA ports */
+ NV_ADMA_PORT = 0x480,
+
+ /* size of ADMA port register space */
+ NV_ADMA_PORT_SIZE = 0x100,
+
+ /* ADMA port registers */
+ NV_ADMA_CTL = 0x40,
+ NV_ADMA_CPB_COUNT = 0x42,
+ NV_ADMA_NEXT_CPB_IDX = 0x43,
+ NV_ADMA_STAT = 0x44,
+ NV_ADMA_CPB_BASE_LOW = 0x48,
+ NV_ADMA_CPB_BASE_HIGH = 0x4C,
+ NV_ADMA_APPEND = 0x50,
+ NV_ADMA_NOTIFIER = 0x68,
+ NV_ADMA_NOTIFIER_ERROR = 0x6C,
+
+ /* NV_ADMA_CTL register bits */
+ NV_ADMA_CTL_HOTPLUG_IEN = (1 << 0),
+ NV_ADMA_CTL_CHANNEL_RESET = (1 << 5),
+ NV_ADMA_CTL_GO = (1 << 7),
+ NV_ADMA_CTL_AIEN = (1 << 8),
+ NV_ADMA_CTL_READ_NON_COHERENT = (1 << 11),
+ NV_ADMA_CTL_WRITE_NON_COHERENT = (1 << 12),
+
+ /* CPB response flag bits */
+ NV_CPB_RESP_DONE = (1 << 0),
+ NV_CPB_RESP_ATA_ERR = (1 << 3),
+ NV_CPB_RESP_CMD_ERR = (1 << 4),
+ NV_CPB_RESP_CPB_ERR = (1 << 7),
+
+ /* CPB control flag bits */
+ NV_CPB_CTL_CPB_VALID = (1 << 0),
+ NV_CPB_CTL_QUEUE = (1 << 1),
+ NV_CPB_CTL_APRD_VALID = (1 << 2),
+ NV_CPB_CTL_IEN = (1 << 3),
+ NV_CPB_CTL_FPDMA = (1 << 4),
+
+ /* APRD flags */
+ NV_APRD_WRITE = (1 << 1),
+ NV_APRD_END = (1 << 2),
+ NV_APRD_CONT = (1 << 3),
+
+ /* NV_ADMA_STAT flags */
+ NV_ADMA_STAT_TIMEOUT = (1 << 0),
+ NV_ADMA_STAT_HOTUNPLUG = (1 << 1),
+ NV_ADMA_STAT_HOTPLUG = (1 << 2),
+ NV_ADMA_STAT_CPBERR = (1 << 4),
+ NV_ADMA_STAT_SERROR = (1 << 5),
+ NV_ADMA_STAT_CMD_COMPLETE = (1 << 6),
+ NV_ADMA_STAT_IDLE = (1 << 8),
+ NV_ADMA_STAT_LEGACY = (1 << 9),
+ NV_ADMA_STAT_STOPPED = (1 << 10),
+ NV_ADMA_STAT_DONE = (1 << 12),
+ NV_ADMA_STAT_ERR = NV_ADMA_STAT_CPBERR |
+ NV_ADMA_STAT_TIMEOUT,
+
+ /* port flags */
+ NV_ADMA_PORT_REGISTER_MODE = (1 << 0),
+
+};
+
+/* ADMA Physical Region Descriptor - one SG segment */
+struct nv_adma_prd {
+ __le64 addr;
+ __le32 len;
+ u8 flags;
+ u8 packet_len;
+ __le16 reserved;
+};
+
+enum nv_adma_regbits {
+ CMDEND = (1 << 15), /* end of command list */
+ WNB = (1 << 14), /* wait-not-BSY */
+ IGN = (1 << 13), /* ignore this entry */
+ CS1n = (1 << (4 + 8)), /* std. PATA signals follow... */
+ DA2 = (1 << (2 + 8)),
+ DA1 = (1 << (1 + 8)),
+ DA0 = (1 << (0 + 8)),
};
+/* ADMA Command Parameter Block
+ The first 5 SG segments are stored inside the Command Parameter Block itself.
+ If there are more than 5 segments the remainder are stored in a separate
+ memory area indicated by next_aprd. */
+struct nv_adma_cpb {
+ u8 resp_flags; /* 0 */
+ u8 reserved1; /* 1 */
+ u8 ctl_flags; /* 2 */
+ /* len is length of taskfile in 64 bit words */
+ u8 len; /* 3 */
+ u8 tag; /* 4 */
+ u8 next_cpb_idx; /* 5 */
+ __le16 reserved2; /* 6-7 */
+ __le16 tf[12]; /* 8-31 */
+ struct nv_adma_prd aprd[5]; /* 32-111 */
+ __le64 next_aprd; /* 112-119 */
+ __le64 reserved3; /* 120-127 */
+};
+
+
+struct nv_adma_port_priv {
+ struct nv_adma_cpb *cpb;
+ dma_addr_t cpb_dma;
+ struct nv_adma_prd *aprd;
+ dma_addr_t aprd_dma;
+ u8 flags;
+};
+
+#define NV_ADMA_CHECK_INTR(GCTL, PORT) ((GCTL) & ( 1 << (19 + (12 * (PORT)))))
+
static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
static void nv_ck804_host_stop(struct ata_host *host);
static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance);
@@ -93,13 +230,27 @@ static void nv_nf2_thaw(struct ata_port
static void nv_ck804_freeze(struct ata_port *ap);
static void nv_ck804_thaw(struct ata_port *ap);
static void nv_error_handler(struct ata_port *ap);
+static int nv_adma_slave_config(struct scsi_device *sdev);
+static void nv_adma_qc_prep(struct ata_queued_cmd *qc);
+static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc);
+static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance);
+static void nv_adma_irq_clear(struct ata_port *ap);
+static int nv_adma_port_start(struct ata_port *ap);
+static void nv_adma_port_stop(struct ata_port *ap);
+static void nv_adma_error_handler(struct ata_port *ap);
+static void nv_adma_host_stop(struct ata_host *host);
+static void nv_adma_bmdma_setup(struct ata_queued_cmd *qc);
+static void nv_adma_bmdma_start(struct ata_queued_cmd *qc);
+static void nv_adma_bmdma_stop(struct ata_queued_cmd *qc);
+static u8 nv_adma_bmdma_status(struct ata_port *ap);
enum nv_host_type
{
GENERIC,
NFORCE2,
NFORCE3 = NFORCE2, /* NF2 == NF3 as far as sata_nv is concerned */
- CK804
+ CK804,
+ ADMA
};
static const struct pci_device_id nv_pci_tbl[] = {
@@ -156,6 +307,25 @@ static struct scsi_host_template nv_sht
.bios_param = ata_std_bios_param,
};
+static struct scsi_host_template nv_adma_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = NV_ADMA_MAX_CPBS,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = NV_ADMA_DMA_BOUNDARY,
+ .slave_configure = nv_adma_slave_config,
+ .slave_destroy = ata_scsi_slave_destroy,
+ .bios_param = ata_std_bios_param,
+};
+
static const struct ata_port_operations nv_generic_ops = {
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
@@ -237,6 +407,33 @@ static const struct ata_port_operations
.host_stop = nv_ck804_host_stop,
};
+static const struct ata_port_operations nv_adma_ops = {
+ .port_disable = ata_port_disable,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .exec_command = ata_exec_command,
+ .check_status = ata_check_status,
+ .dev_select = ata_std_dev_select,
+ .bmdma_setup = nv_adma_bmdma_setup,
+ .bmdma_start = nv_adma_bmdma_start,
+ .bmdma_stop = nv_adma_bmdma_stop,
+ .bmdma_status = nv_adma_bmdma_status,
+ .qc_prep = nv_adma_qc_prep,
+ .qc_issue = nv_adma_qc_issue,
+ .freeze = nv_ck804_freeze,
+ .thaw = nv_ck804_thaw,
+ .error_handler = nv_adma_error_handler,
+ .post_internal_cmd = nv_adma_bmdma_stop,
+ .data_xfer = ata_mmio_data_xfer,
+ .irq_handler = nv_adma_interrupt,
+ .irq_clear = nv_adma_irq_clear,
+ .scr_read = nv_scr_read,
+ .scr_write = nv_scr_write,
+ .port_start = nv_adma_port_start,
+ .port_stop = nv_adma_port_stop,
+ .host_stop = nv_adma_host_stop,
+};
+
static struct ata_port_info nv_port_info[] = {
/* generic */
{
@@ -265,6 +462,16 @@ static struct ata_port_info nv_port_info
.udma_mask = NV_UDMA_MASK,
.port_ops = &nv_ck804_ops,
},
+ /* ADMA */
+ {
+ .sht = &nv_adma_sht,
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO | ATA_FLAG_NCQ,
+ .pio_mask = NV_PIO_MASK,
+ .mwdma_mask = NV_MWDMA_MASK,
+ .udma_mask = NV_UDMA_MASK,
+ .port_ops = &nv_adma_ops,
+ },
};
MODULE_AUTHOR("NVIDIA");
@@ -273,6 +480,614 @@ MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, nv_pci_tbl);
MODULE_VERSION(DRV_VERSION);
+static int adma_enabled = 1;
+
+static int nv_adma_slave_config(struct scsi_device *sdev)
+{
+ struct ata_port *ap = ata_shost_to_port(sdev->host);
+ u64 bounce_limit;
+ unsigned long segment_boundary;
+ unsigned short sg_tablesize;
+ int rc;
+
+ rc = ata_scsi_slave_config(sdev);
+
+ if (sdev->id >= ATA_MAX_DEVICES || sdev->channel || sdev->lun)
+ /* Not a proper libata device, ignore */
+ return rc;
+
+ if (ap->device[sdev->id].class == ATA_DEV_ATAPI) {
+ /*
+ * NVIDIA reports that ADMA mode does not support ATAPI commands.
+ * Therefore ATAPI commands are sent through the legacy interface.
+ * However, the legacy interface only supports 32-bit DMA.
+ * Restrict DMA parameters as required by the legacy interface
+ * when an ATAPI device is connected.
+ */
+ bounce_limit = ATA_DMA_MASK;
+ segment_boundary = ATA_DMA_BOUNDARY;
+ /* Subtract 1 since an extra entry may be needed for padding, see
+ libata-scsi.c */
+ sg_tablesize = LIBATA_MAX_PRD - 1;
+ }
+ else {
+ bounce_limit = *ap->dev->dma_mask;
+ segment_boundary = NV_ADMA_DMA_BOUNDARY;
+ sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN;
+ }
+
+ blk_queue_bounce_limit(sdev->request_queue, bounce_limit);
+ blk_queue_segment_boundary(sdev->request_queue, segment_boundary);
+ blk_queue_max_hw_segments(sdev->request_queue, sg_tablesize);
+ ata_port_printk(ap, KERN_INFO,
+ "bounce limit 0x%llX, segment boundary 0x%lX, hw segs %hu\n",
+ (unsigned long long)bounce_limit, segment_boundary, sg_tablesize);
+ return rc;
+}
+
+static unsigned int nv_adma_tf_to_cpb(struct ata_taskfile *tf, u16 *cpb)
+{
+ unsigned int idx = 0;
+
+ cpb[idx++] = cpu_to_le16((ATA_REG_DEVICE << 8) | tf->device | WNB);
+
+ if ((tf->flags & ATA_TFLAG_LBA48) == 0) {
+ cpb[idx++] = cpu_to_le16(IGN);
+ cpb[idx++] = cpu_to_le16(IGN);
+ cpb[idx++] = cpu_to_le16(IGN);
+ cpb[idx++] = cpu_to_le16(IGN);
+ cpb[idx++] = cpu_to_le16(IGN);
+ }
+ else {
+ cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->hob_feature);
+ cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->hob_nsect);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAL << 8) | tf->hob_lbal);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAM << 8) | tf->hob_lbam);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->hob_lbah);
+ }
+ cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->feature);
+ cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->nsect);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAL << 8) | tf->lbal);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAM << 8) | tf->lbam);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->lbah);
+
+ cpb[idx++] = cpu_to_le16((ATA_REG_CMD << 8) | tf->command | CMDEND);
+
+ return idx;
+}
+
+static inline void __iomem *__nv_adma_ctl_block(void __iomem *mmio,
+ unsigned int port_no)
+{
+ mmio += NV_ADMA_PORT + port_no * NV_ADMA_PORT_SIZE;
+ return mmio;
+}
+
+static inline void __iomem *nv_adma_ctl_block(struct ata_port *ap)
+{
+ return __nv_adma_ctl_block(ap->host->mmio_base, ap->port_no);
+}
+
+static inline void __iomem *nv_adma_gen_block(struct ata_port *ap)
+{
+ return (ap->host->mmio_base + NV_ADMA_GEN);
+}
+
+static inline void __iomem *nv_adma_notifier_clear_block(struct ata_port *ap)
+{
+ return (nv_adma_gen_block(ap) + NV_ADMA_NOTIFIER_CLEAR + (4 * ap->port_no));
+}
+
+static void nv_adma_check_cpb(struct ata_port *ap, int cpb_num, int force_err)
+{
+ struct nv_adma_port_priv *pp = ap->private_data;
+ int complete = 0, have_err = 0;
+ u16 flags = pp->cpb[cpb_num].resp_flags;
+
+ VPRINTK("CPB %d, flags=0x%x\n", cpb_num, flags);
+
+ if (flags & NV_CPB_RESP_DONE) {
+ VPRINTK("CPB flags done, flags=0x%x\n", flags);
+ complete = 1;
+ }
+ if (flags & NV_CPB_RESP_ATA_ERR) {
+ ata_port_printk(ap, KERN_ERR, "CPB flags ATA err, flags=0x%x\n", flags);
+ have_err = 1;
+ complete = 1;
+ }
+ if (flags & NV_CPB_RESP_CMD_ERR) {
+ ata_port_printk(ap, KERN_ERR, "CPB flags CMD err, flags=0x%x\n", flags);
+ have_err = 1;
+ complete = 1;
+ }
+ if (flags & NV_CPB_RESP_CPB_ERR) {
+ ata_port_printk(ap, KERN_ERR, "CPB flags CPB err, flags=0x%x\n", flags);
+ have_err = 1;
+ complete = 1;
+ }
+ if(complete || force_err)
+ {
+ struct ata_queued_cmd *qc = ata_qc_from_tag(ap, cpb_num);
+ if(likely(qc)) {
+ u8 ata_status = 0;
+ /* Only use the ATA port status for non-NCQ commands.
+ For NCQ commands the current status may have nothing to do with
+ the command just completed. */
+ if(qc->tf.protocol != ATA_PROT_NCQ)
+ ata_status = readb(nv_adma_ctl_block(ap) + (ATA_REG_STATUS * 4));
+
+ if(have_err || force_err)
+ ata_status |= ATA_ERR;
+
+ qc->err_mask |= ac_err_mask(ata_status);
+ DPRINTK("Completing qc from tag %d with err_mask %u\n",cpb_num,
+ qc->err_mask);
+ ata_qc_complete(qc);
+ }
+ }
+}
+
+static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
+{
+ struct ata_host *host = dev_instance;
+ int i, handled = 0;
+
+ spin_lock(&host->lock);
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
+ struct nv_adma_port_priv *pp = ap->private_data;
+ void __iomem *mmio = nv_adma_ctl_block(ap);
+ u16 status;
+ u32 gen_ctl;
+ int have_global_err = 0;
+ u32 notifier, notifier_error;
+
+ /* if in ATA register mode, use standard ata interrupt handler */
+ if (pp->flags & NV_ADMA_PORT_REGISTER_MODE) {
+ struct ata_queued_cmd *qc;
+ VPRINTK("in ATA register mode\n");
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
+ handled += ata_host_intr(ap, qc);
+ else {
+ /* No request pending? Clear interrupt status
+ anyway, in case there's one pending. */
+ ap->ops->check_status(ap);
+ handled++;
+ }
+ continue;
+ }
+
+ notifier = readl(mmio + NV_ADMA_NOTIFIER);
+ notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
+
+ gen_ctl = readl(nv_adma_gen_block(ap) + NV_ADMA_GEN_CTL);
+
+ /* Seems necessary to clear notifiers even when they were 0.
+ Otherwise we seem to stop receiving further interrupts.
+ Unsure why. */
+ writel(notifier | notifier_error, nv_adma_notifier_clear_block(ap));
+
+ if( !NV_ADMA_CHECK_INTR(gen_ctl, ap->port_no) && !notifier &&
+ !notifier_error)
+ /* Nothing to do */
+ continue;
+
+ status = readw(mmio + NV_ADMA_STAT);
+
+ /* Clear status. Ensure the controller sees the clearing before we start
+ looking at any of the CPB statuses, so that any CPB completions after
+ this point in the handler will raise another interrupt. */
+ writew(status, mmio + NV_ADMA_STAT);
+ readw(mmio + NV_ADMA_STAT); /* flush posted write */
+ rmb();
+
+ /* freeze if hotplugged */
+ if (unlikely(status & (NV_ADMA_STAT_HOTPLUG | NV_ADMA_STAT_HOTUNPLUG))) {
+ ata_port_printk(ap, KERN_NOTICE, "Hotplug event, freezing\n");
+ ata_port_freeze(ap);
+ handled++;
+ continue;
+ }
+
+ if (status & NV_ADMA_STAT_TIMEOUT) {
+ ata_port_printk(ap, KERN_ERR, "timeout, stat=0x%x\n", status);
+ have_global_err = 1;
+ }
+ if (status & NV_ADMA_STAT_CPBERR) {
+ ata_port_printk(ap, KERN_ERR, "CPB error, stat=0x%x\n", status);
+ have_global_err = 1;
+ }
+ if ((status & NV_ADMA_STAT_DONE) || have_global_err) {
+ /** Check CPBs for completed commands */
+
+ if(ata_tag_valid(ap->active_tag))
+ /* Non-NCQ command */
+ nv_adma_check_cpb(ap, ap->active_tag, have_global_err ||
+ (notifier_error & (1 << ap->active_tag)));
+ else {
+ int pos;
+ u32 active = ap->sactive;
+ while( (pos = ffs(active)) ) {
+ pos--;
+ nv_adma_check_cpb(ap, pos, have_global_err ||
+ (notifier_error & (1 << pos)) );
+ active &= ~(1 << pos );
+ }
+ }
+ }
+
+ handled++; /* irq handled if we got here */
+ }
+ }
+
+ spin_unlock(&host->lock);
+
+ return IRQ_RETVAL(handled);
+}
+
+static void nv_adma_irq_clear(struct ata_port *ap)
+{
+ void __iomem *mmio = nv_adma_ctl_block(ap);
+ u16 status = readw(mmio + NV_ADMA_STAT);
+ u32 notifier = readl(mmio + NV_ADMA_NOTIFIER);
+ u32 notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
+
+ /* clear ADMA status */
+ writew(status, mmio + NV_ADMA_STAT);
+ writel(notifier | notifier_error,
+ nv_adma_notifier_clear_block(ap));
+
+ /** clear legacy status */
+ ap->flags &= ~ATA_FLAG_MMIO;
+ ata_bmdma_irq_clear(ap);
+ ap->flags |= ATA_FLAG_MMIO;
+}
+
+static void nv_adma_bmdma_setup(struct ata_queued_cmd *qc)
+{
+ struct nv_adma_port_priv *pp = qc->ap->private_data;
+
+ if(pp->flags & NV_ADMA_PORT_REGISTER_MODE) {
+ WARN_ON(1);
+ return;
+ }
+
+ qc->ap->flags &= ~ATA_FLAG_MMIO;
+ ata_bmdma_setup(qc);
+ qc->ap->flags |= ATA_FLAG_MMIO;
+}
+
+static void nv_adma_bmdma_start(struct ata_queued_cmd *qc)
+{
+ struct nv_adma_port_priv *pp = qc->ap->private_data;
+
+ if(pp->flags & NV_ADMA_PORT_REGISTER_MODE) {
+ WARN_ON(1);
+ return;
+ }
+
+ qc->ap->flags &= ~ATA_FLAG_MMIO;
+ ata_bmdma_start(qc);
+ qc->ap->flags |= ATA_FLAG_MMIO;
+}
+
+static void nv_adma_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ struct nv_adma_port_priv *pp = qc->ap->private_data;
+
+ if(pp->flags & NV_ADMA_PORT_REGISTER_MODE)
+ return;
+
+ qc->ap->flags &= ~ATA_FLAG_MMIO;
+ ata_bmdma_stop(qc);
+ qc->ap->flags |= ATA_FLAG_MMIO;
+}
+
+static u8 nv_adma_bmdma_status(struct ata_port *ap)
+{
+ u8 status;
+ struct nv_adma_port_priv *pp = ap->private_data;
+
+ WARN_ON(pp->flags & NV_ADMA_PORT_REGISTER_MODE);
+
+ ap->flags &= ~ATA_FLAG_MMIO;
+ status = ata_bmdma_status(ap);
+ ap->flags |= ATA_FLAG_MMIO;
+ return status;
+}
+
+static void nv_adma_register_mode(struct ata_port *ap)
+{
+ void __iomem *mmio = nv_adma_ctl_block(ap);
+ struct nv_adma_port_priv *pp = ap->private_data;
+ u16 tmp;
+
+ if (pp->flags & NV_ADMA_PORT_REGISTER_MODE)
+ return;
+
+ tmp = readw(mmio + NV_ADMA_CTL);
+ writew(tmp & ~NV_ADMA_CTL_GO, mmio + NV_ADMA_CTL);
+
+ pp->flags |= NV_ADMA_PORT_REGISTER_MODE;
+}
+
+static void nv_adma_mode(struct ata_port *ap)
+{
+ void __iomem *mmio = nv_adma_ctl_block(ap);
+ struct nv_adma_port_priv *pp = ap->private_data;
+ u16 tmp;
+
+ if (!(pp->flags & NV_ADMA_PORT_REGISTER_MODE))
+ return;
+
+ tmp = readw(mmio + NV_ADMA_CTL);
+ writew(tmp | NV_ADMA_CTL_GO, mmio + NV_ADMA_CTL);
+
+ pp->flags &= ~NV_ADMA_PORT_REGISTER_MODE;
+}
+
+static int nv_adma_port_start(struct ata_port *ap)
+{
+ struct device *dev = ap->host->dev;
+ struct nv_adma_port_priv *pp;
+ int rc;
+ void *mem;
+ dma_addr_t mem_dma;
+ void __iomem *mmio = nv_adma_ctl_block(ap);
+ u16 tmp;
+
+ VPRINTK("ENTER\n");
+
+ rc = ata_port_start(ap);
+ if (rc)
+ return rc;
+
+ pp = kzalloc(sizeof(*pp), GFP_KERNEL);
+ if (!pp) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
+
+ mem = dma_alloc_coherent(dev, NV_ADMA_PORT_PRIV_DMA_SZ,
+ &mem_dma, GFP_KERNEL);
+
+ if (!mem) {
+ rc = -ENOMEM;
+ goto err_out_kfree;
+ }
+ memset(mem, 0, NV_ADMA_PORT_PRIV_DMA_SZ);
+
+ /*
+ * First item in chunk of DMA memory:
+ * 128-byte command parameter block (CPB)
+ * one for each command tag
+ */
+ pp->cpb = mem;
+ pp->cpb_dma = mem_dma;
+
+ writel(mem_dma & 0xFFFFFFFF, mmio + NV_ADMA_CPB_BASE_LOW);
+ writel((mem_dma >> 16 ) >> 16, mmio + NV_ADMA_CPB_BASE_HIGH);
+
+ mem += NV_ADMA_MAX_CPBS * NV_ADMA_CPB_SZ;
+ mem_dma += NV_ADMA_MAX_CPBS * NV_ADMA_CPB_SZ;
+
+ /*
+ * Second item: block of ADMA_SGTBL_LEN s/g entries
+ */
+ pp->aprd = mem;
+ pp->aprd_dma = mem_dma;
+
+ ap->private_data = pp;
+
+ /* clear any outstanding interrupt conditions */
+ writew(0xffff, mmio + NV_ADMA_STAT);
+
+ /* initialize port variables */
+ pp->flags = NV_ADMA_PORT_REGISTER_MODE;
+
+ /* clear CPB fetch count */
+ writew(0, mmio + NV_ADMA_CPB_COUNT);
+
+ /* clear GO for register mode */
+ tmp = readw(mmio + NV_ADMA_CTL);
+ writew(tmp & ~NV_ADMA_CTL_GO, mmio + NV_ADMA_CTL);
+
+ tmp = readw(mmio + NV_ADMA_CTL);
+ writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
+ readl( mmio + NV_ADMA_CTL ); /* flush posted write */
+ udelay(1);
+ writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
+ readl( mmio + NV_ADMA_CTL ); /* flush posted write */
+
+ return 0;
+
+err_out_kfree:
+ kfree(pp);
+err_out:
+ ata_port_stop(ap);
+ return rc;
+}
+
+static void nv_adma_port_stop(struct ata_port *ap)
+{
+ struct device *dev = ap->host->dev;
+ struct nv_adma_port_priv *pp = ap->private_data;
+ void __iomem *mmio = nv_adma_ctl_block(ap);
+
+ VPRINTK("ENTER\n");
+
+ writew(0, mmio + NV_ADMA_CTL);
+
+ ap->private_data = NULL;
+ dma_free_coherent(dev, NV_ADMA_PORT_PRIV_DMA_SZ, pp->cpb, pp->cpb_dma);
+ kfree(pp);
+ ata_port_stop(ap);
+}
+
+
+static void nv_adma_setup_port(struct ata_probe_ent *probe_ent, unsigned int port)
+{
+ void __iomem *mmio = probe_ent->mmio_base;
+ struct ata_ioports *ioport = &probe_ent->port[port];
+
+ VPRINTK("ENTER\n");
+
+ mmio += NV_ADMA_PORT + port * NV_ADMA_PORT_SIZE;
+
+ ioport->cmd_addr = (unsigned long) mmio;
+ ioport->data_addr = (unsigned long) mmio + (ATA_REG_DATA * 4);
+ ioport->error_addr =
+ ioport->feature_addr = (unsigned long) mmio + (ATA_REG_ERR * 4);
+ ioport->nsect_addr = (unsigned long) mmio + (ATA_REG_NSECT * 4);
+ ioport->lbal_addr = (unsigned long) mmio + (ATA_REG_LBAL * 4);
+ ioport->lbam_addr = (unsigned long) mmio + (ATA_REG_LBAM * 4);
+ ioport->lbah_addr = (unsigned long) mmio + (ATA_REG_LBAH * 4);
+ ioport->device_addr = (unsigned long) mmio + (ATA_REG_DEVICE * 4);
+ ioport->status_addr =
+ ioport->command_addr = (unsigned long) mmio + (ATA_REG_STATUS * 4);
+ ioport->altstatus_addr =
+ ioport->ctl_addr = (unsigned long) mmio + 0x20;
+}
+
+static int nv_adma_host_init(struct ata_probe_ent *probe_ent)
+{
+ struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
+ unsigned int i;
+ u32 tmp32;
+
+ VPRINTK("ENTER\n");
+
+ /* enable ADMA on the ports */
+ pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, &tmp32);
+ tmp32 |= NV_MCP_SATA_CFG_20_PORT0_EN |
+ NV_MCP_SATA_CFG_20_PORT0_PWB_EN |
+ NV_MCP_SATA_CFG_20_PORT1_EN |
+ NV_MCP_SATA_CFG_20_PORT1_PWB_EN;
+
+ pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32);
+
+ for (i = 0; i < probe_ent->n_ports; i++)
+ nv_adma_setup_port(probe_ent, i);
+
+ for (i = 0; i < probe_ent->n_ports; i++) {
+ void __iomem *mmio = __nv_adma_ctl_block(probe_ent->mmio_base, i);
+ u16 tmp;
+
+ /* enable interrupt, clear reset if not already clear */
+ tmp = readw(mmio + NV_ADMA_CTL);
+ writew(tmp | NV_ADMA_CTL_AIEN, mmio + NV_ADMA_CTL);
+ }
+
+ return 0;
+}
+
+static void nv_adma_fill_aprd(struct ata_queued_cmd *qc,
+ struct scatterlist *sg,
+ int idx,
+ struct nv_adma_prd *aprd)
+{
+ u32 flags;
+
+ memset(aprd, 0, sizeof(struct nv_adma_prd));
+
+ flags = 0;
+ if (qc->tf.flags & ATA_TFLAG_WRITE)
+ flags |= NV_APRD_WRITE;
+ if (idx == qc->n_elem - 1)
+ flags |= NV_APRD_END;
+ else if (idx != 4)
+ flags |= NV_APRD_CONT;
+
+ aprd->addr = cpu_to_le64(((u64)sg_dma_address(sg)));
+ aprd->len = cpu_to_le32(((u32)sg_dma_len(sg))); /* len in bytes */
+ aprd->flags = cpu_to_le32(flags);
+}
+
+static void nv_adma_fill_sg(struct ata_queued_cmd *qc, struct nv_adma_cpb *cpb)
+{
+ struct nv_adma_port_priv *pp = qc->ap->private_data;
+ unsigned int idx;
+ struct nv_adma_prd *aprd;
+ struct scatterlist *sg;
+
+ VPRINTK("ENTER\n");
+
+ idx = 0;
+
+ ata_for_each_sg(sg, qc) {
+ aprd = (idx < 5) ? &cpb->aprd[idx] : &pp->aprd[NV_ADMA_SGTBL_LEN * qc->tag + (idx-5)];
+ nv_adma_fill_aprd(qc, sg, idx, aprd);
+ idx++;
+ }
+ if (idx > 5)
+ cpb->next_aprd = cpu_to_le64(((u64)(pp->aprd_dma + NV_ADMA_SGTBL_SZ * qc->tag)));
+}
+
+static void nv_adma_qc_prep(struct ata_queued_cmd *qc)
+{
+ struct nv_adma_port_priv *pp = qc->ap->private_data;
+ struct nv_adma_cpb *cpb = &pp->cpb[qc->tag];
+ u8 ctl_flags = NV_CPB_CTL_CPB_VALID |
+ NV_CPB_CTL_APRD_VALID |
+ NV_CPB_CTL_IEN;
+
+ VPRINTK("qc->flags = 0x%lx\n", qc->flags);
+
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP) ||
+ qc->tf.protocol == ATA_PROT_ATAPI_DMA) {
+ ata_qc_prep(qc);
+ return;
+ }
+
+ memset(cpb, 0, sizeof(struct nv_adma_cpb));
+
+ cpb->len = 3;
+ cpb->tag = qc->tag;
+ cpb->next_cpb_idx = 0;
+
+ /* turn on NCQ flags for NCQ commands */
+ if (qc->tf.protocol == ATA_PROT_NCQ)
+ ctl_flags |= NV_CPB_CTL_QUEUE | NV_CPB_CTL_FPDMA;
+
+ nv_adma_tf_to_cpb(&qc->tf, cpb->tf);
+
+ nv_adma_fill_sg(qc, cpb);
+
+ /* Be paranoid and don't let the device see NV_CPB_CTL_CPB_VALID until we are
+ finished filling in all of the contents */
+ wmb();
+ cpb->ctl_flags = ctl_flags;
+}
+
+static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc)
+{
+ void __iomem *mmio = nv_adma_ctl_block(qc->ap);
+
+ VPRINTK("ENTER\n");
+
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP) ||
+ qc->tf.protocol == ATA_PROT_ATAPI_DMA) {
+ /* use ATA register mode */
+ VPRINTK("no dmamap or ATAPI, using ATA register mode: 0x%lx\n", qc->flags);
+ nv_adma_register_mode(qc->ap);
+ return ata_qc_issue_prot(qc);
+ } else
+ nv_adma_mode(qc->ap);
+
+ /* write append register, command tag in lower 8 bits
+ and (number of cpbs to append -1) in top 8 bits */
+ wmb();
+ writew(qc->tag, mmio + NV_ADMA_APPEND);
+
+ DPRINTK("Issued tag %u\n",qc->tag);
+
+ return 0;
+}
+
static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
@@ -462,6 +1277,56 @@ static void nv_error_handler(struct ata_
nv_hardreset, ata_std_postreset);
}
+static void nv_adma_error_handler(struct ata_port *ap)
+{
+ struct nv_adma_port_priv *pp = ap->private_data;
+ if(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) {
+ void __iomem *mmio = nv_adma_ctl_block(ap);
+ int i;
+ u16 tmp;
+
+ u32 notifier = readl(mmio + NV_ADMA_NOTIFIER);
+ u32 notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
+ u32 gen_ctl = readl(nv_adma_gen_block(ap) + NV_ADMA_GEN_CTL);
+ u32 status = readw(mmio + NV_ADMA_STAT);
+
+ ata_port_printk(ap, KERN_ERR, "EH in ADMA mode, notifier 0x%X "
+ "notifier_error 0x%X gen_ctl 0x%X status 0x%X\n",
+ notifier, notifier_error, gen_ctl, status);
+
+ for( i=0;i<NV_ADMA_MAX_CPBS;i++) {
+ struct nv_adma_cpb *cpb = &pp->cpb[i];
+ if( cpb->ctl_flags || cpb->resp_flags )
+ ata_port_printk(ap, KERN_ERR,
+ "CPB %d: ctl_flags 0x%x, resp_flags 0x%x\n",
+ i, cpb->ctl_flags, cpb->resp_flags);
+ }
+
+ /* Push us back into port register mode for error handling. */
+ nv_adma_register_mode(ap);
+
+ ata_port_printk(ap, KERN_ERR, "Resetting port\n");
+
+ /* Mark all of the CPBs as invalid to prevent them from being executed */
+ for( i=0;i<NV_ADMA_MAX_CPBS;i++)
+ pp->cpb[i].ctl_flags &= ~NV_CPB_CTL_CPB_VALID;
+
+ /* clear CPB fetch count */
+ writew(0, mmio + NV_ADMA_CPB_COUNT);
+
+ /* Reset channel */
+ tmp = readw(mmio + NV_ADMA_CTL);
+ writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
+ readl( mmio + NV_ADMA_CTL ); /* flush posted write */
+ udelay(1);
+ writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
+ readl( mmio + NV_ADMA_CTL ); /* flush posted write */
+ }
+
+ ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
+ nv_hardreset, ata_std_postreset);
+}
+
static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version = 0;
@@ -471,6 +1336,8 @@ static int nv_init_one (struct pci_dev *
int rc;
u32 bar;
unsigned long base;
+ unsigned long type = ent->driver_data;
+ int mask_set = 0;
// Make sure this is a SATA controller by counting the number of bars
// (NVIDIA SATA controllers will always have six bars). Otherwise,
@@ -479,9 +1346,9 @@ static int nv_init_one (struct pci_dev *
if (pci_resource_start(pdev, bar) == 0)
return -ENODEV;
- if (!printed_version++)
+ if ( !printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
-
+
rc = pci_enable_device(pdev);
if (rc)
goto err_out;
@@ -492,16 +1359,26 @@ static int nv_init_one (struct pci_dev *
goto err_out_disable;
}
- rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
- if (rc)
- goto err_out_regions;
- rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
- if (rc)
- goto err_out_regions;
+ if(type >= CK804 && adma_enabled) {
+ dev_printk(KERN_NOTICE, &pdev->dev, "Using ADMA mode\n");
+ type = ADMA;
+ if(!pci_set_dma_mask(pdev, DMA_64BIT_MASK) &&
+ !pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))
+ mask_set = 1;
+ }
+
+ if(!mask_set) {
+ rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ goto err_out_regions;
+ rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ goto err_out_regions;
+ }
rc = -ENOMEM;
- ppi[0] = ppi[1] = &nv_port_info[ent->driver_data];
+ ppi[0] = ppi[1] = &nv_port_info[type];
probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
if (!probe_ent)
goto err_out_regions;
@@ -518,7 +1395,7 @@ static int nv_init_one (struct pci_dev *
probe_ent->port[1].scr_addr = base + NV_PORT1_SCR_REG_OFFSET;
/* enable SATA space for CK804 */
- if (ent->driver_data == CK804) {
+ if (type >= CK804) {
u8 regval;
pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val);
@@ -528,6 +1405,12 @@ static int nv_init_one (struct pci_dev *
pci_set_master(pdev);
+ if (type == ADMA) {
+ rc = nv_adma_host_init(probe_ent);
+ if (rc)
+ goto err_out_iounmap;
+ }
+
rc = ata_device_add(probe_ent);
if (rc != NV_PORTS)
goto err_out_iounmap;
@@ -562,6 +1445,33 @@ static void nv_ck804_host_stop(struct at
ata_pci_host_stop(host);
}
+static void nv_adma_host_stop(struct ata_host *host)
+{
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+ int i;
+ u32 tmp32;
+
+ for (i = 0; i < host->n_ports; i++) {
+ void __iomem *mmio = __nv_adma_ctl_block(host->mmio_base, i);
+ u16 tmp;
+
+ /* disable interrupt */
+ tmp = readw(mmio + NV_ADMA_CTL);
+ writew(tmp & ~NV_ADMA_CTL_AIEN, mmio + NV_ADMA_CTL);
+ }
+
+ /* disable ADMA on the ports */
+ pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, &tmp32);
+ tmp32 &= ~(NV_MCP_SATA_CFG_20_PORT0_EN |
+ NV_MCP_SATA_CFG_20_PORT0_PWB_EN |
+ NV_MCP_SATA_CFG_20_PORT1_EN |
+ NV_MCP_SATA_CFG_20_PORT1_PWB_EN);
+
+ pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32);
+
+ nv_ck804_host_stop(host);
+}
+
static int __init nv_init(void)
{
return pci_register_driver(&nv_pci_driver);
@@ -574,3 +1484,5 @@ static void __exit nv_exit(void)
module_init(nv_init);
module_exit(nv_exit);
+module_param_named(adma, adma_enabled, bool, 0444);
+MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: true)");
> Another update to this patch, now version 7. This greatly
> simplifies the
> interrupt handler and gets rid of some of the weird code
> relating to the
> notifier clear registers (as well as a potential uninitialized value
> usage that was in version 6). There still seems to be the
> need to do a
> notifier clear in the interrupt handler even when the notifiers are
> empty. I'm not sure why that is, it would be nice to get some
> input from
> NVIDIA or those with the hardware specs as to what writing values
> (including zero values) to the notifier clear registers actually does.
You always have to write both notifiers even if one is 0, no interrupt
ack takes place until both are written.
-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may contain
confidential information. Any unauthorized review, use, disclosure or distribution
is prohibited. If you are not the intended recipient, please contact the sender by
reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------