2022-07-19 07:36:28

by Peng Fan (OSS)

[permalink] [raw]
Subject: [PATCH V6 3/6] soc: imx: add i.MX93 SRC power domain driver

From: Peng Fan <[email protected]>

Support controlling power domain managed by System Reset
Controller(SRC). Current supported power domain is mediamix power
domain.

Signed-off-by: Peng Fan <[email protected]>
---
drivers/soc/imx/Kconfig | 8 ++
drivers/soc/imx/Makefile | 1 +
drivers/soc/imx/imx93-pd.c | 163 ++++++++++++++++++++++++++++++++++++
drivers/soc/imx/imx93-src.c | 32 +++++++
4 files changed, 204 insertions(+)
create mode 100644 drivers/soc/imx/imx93-pd.c
create mode 100644 drivers/soc/imx/imx93-src.c

diff --git a/drivers/soc/imx/Kconfig b/drivers/soc/imx/Kconfig
index a840494e849a..4b906791d6c7 100644
--- a/drivers/soc/imx/Kconfig
+++ b/drivers/soc/imx/Kconfig
@@ -20,4 +20,12 @@ config SOC_IMX8M
support, it will provide the SoC info like SoC family,
ID and revision etc.

+config SOC_IMX9
+ tristate "i.MX9 SoC family support"
+ depends on ARCH_MXC || COMPILE_TEST
+ default ARCH_MXC && ARM64
+ select SOC_BUS
+ help
+ If you say yes here, you get support for the NXP i.MX9 family
+
endmenu
diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile
index 63cd29f6d4d2..a0baa2a01adb 100644
--- a/drivers/soc/imx/Makefile
+++ b/drivers/soc/imx/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o
obj-$(CONFIG_SOC_IMX8M) += imx8m-blk-ctrl.o
obj-$(CONFIG_SOC_IMX8M) += imx8mp-blk-ctrl.o
+obj-$(CONFIG_SOC_IMX9) += imx93-src.o imx93-pd.o
diff --git a/drivers/soc/imx/imx93-pd.c b/drivers/soc/imx/imx93-pd.c
new file mode 100644
index 000000000000..48437c303b78
--- /dev/null
+++ b/drivers/soc/imx/imx93-pd.c
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2022 NXP
+ */
+
+#include <linux/clk.h>
+#include <linux/of_device.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+
+#define MIX_SLICE_SW_CTRL_OFF 0x20
+#define SLICE_SW_CTRL_PSW_CTRL_OFF_MASK BIT(4)
+#define SLICE_SW_CTRL_PDN_SOFT_MASK BIT(31)
+
+#define MIX_FUNC_STAT_OFF 0xB4
+
+#define FUNC_STAT_PSW_STAT_MASK BIT(0)
+#define FUNC_STAT_RST_STAT_MASK BIT(2)
+#define FUNC_STAT_ISO_STAT_MASK BIT(4)
+
+struct imx93_power_domain {
+ struct generic_pm_domain genpd;
+ struct device *dev;
+ void __iomem *addr;
+ struct clk_bulk_data *clks;
+ int num_clks;
+ bool init_off;
+};
+
+#define to_imx93_pd(_genpd) container_of(_genpd, struct imx93_power_domain, genpd)
+
+static int imx93_pd_on(struct generic_pm_domain *genpd)
+{
+ struct imx93_power_domain *domain = to_imx93_pd(genpd);
+ void __iomem *addr = domain->addr;
+ u32 val;
+ int ret;
+
+ ret = clk_bulk_prepare_enable(domain->num_clks, domain->clks);
+ if (ret) {
+ dev_err(domain->dev, "failed to enable clocks for domain: %s\n", genpd->name);
+ return ret;
+ }
+
+ val = readl(addr + MIX_SLICE_SW_CTRL_OFF);
+ val &= ~SLICE_SW_CTRL_PDN_SOFT_MASK;
+ writel(val, addr + MIX_SLICE_SW_CTRL_OFF);
+
+ ret = readl_poll_timeout(addr + MIX_FUNC_STAT_OFF, val,
+ !(val & FUNC_STAT_ISO_STAT_MASK), 1, 10000);
+ if (ret) {
+ dev_err(domain->dev, "pd_on timeout: name: %s, stat: %x\n", genpd->name, val);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int imx93_pd_off(struct generic_pm_domain *genpd)
+{
+ struct imx93_power_domain *domain = to_imx93_pd(genpd);
+ void __iomem *addr = domain->addr;
+ int ret;
+ u32 val;
+
+ /* Power off MIX */
+ val = readl(addr + MIX_SLICE_SW_CTRL_OFF);
+ val |= SLICE_SW_CTRL_PDN_SOFT_MASK;
+ writel(val, addr + MIX_SLICE_SW_CTRL_OFF);
+
+ ret = readl_poll_timeout(addr + MIX_FUNC_STAT_OFF, val,
+ val & FUNC_STAT_PSW_STAT_MASK, 1, 1000);
+ if (ret) {
+ dev_err(domain->dev, "pd_off timeout: name: %s, stat: %x\n", genpd->name, val);
+ return ret;
+ }
+
+ clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
+
+ return 0;
+};
+
+static int imx93_pd_remove(struct platform_device *pdev)
+{
+ struct imx93_power_domain *domain = platform_get_drvdata(pdev);
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+
+ if (!domain->init_off)
+ clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
+
+ of_genpd_del_provider(np);
+ pm_genpd_remove(&domain->genpd);
+
+ return 0;
+}
+
+static int imx93_pd_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct imx93_power_domain *domain;
+ int ret;
+
+ domain = devm_kzalloc(dev, sizeof(*domain), GFP_KERNEL);
+ if (!domain)
+ return -ENOMEM;
+ domain->addr = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(domain->addr))
+ return PTR_ERR(domain->addr);
+
+
+ domain->num_clks = devm_clk_bulk_get_all(dev, &domain->clks);
+ if (domain->num_clks < 0)
+ return dev_err_probe(dev, domain->num_clks, "Failed to get domain's clocks\n");
+
+ domain->genpd.name = dev_name(dev);
+ domain->genpd.power_off = imx93_pd_off;
+ domain->genpd.power_on = imx93_pd_on;
+ domain->dev = dev;
+
+ domain->init_off = readl(domain->addr + MIX_FUNC_STAT_OFF) & FUNC_STAT_ISO_STAT_MASK;
+ /* Just to sync the status of hardware */
+ if (!domain->init_off) {
+ ret = clk_bulk_prepare_enable(domain->num_clks, domain->clks);
+ if (ret) {
+ dev_err(domain->dev, "failed to enable clocks for domain: %s\n",
+ domain->genpd.name);
+ return 0;
+ }
+ }
+
+ ret = pm_genpd_init(&domain->genpd, NULL, domain->init_off);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, domain);
+
+ return of_genpd_add_provider_simple(np, &domain->genpd);
+}
+
+static const struct of_device_id imx93_dt_ids[] = {
+ { .compatible = "fsl,imx93-src-slice" },
+ { }
+};
+
+static struct platform_driver imx93_power_domain_driver = {
+ .driver = {
+ .name = "imx93_power_domain",
+ .owner = THIS_MODULE,
+ .of_match_table = imx93_dt_ids,
+ },
+ .probe = imx93_pd_probe,
+ .remove = imx93_pd_remove,
+};
+module_platform_driver(imx93_power_domain_driver);
+
+MODULE_AUTHOR("Peng Fan <[email protected]>");
+MODULE_DESCRIPTION("NXP i.MX93 power domain driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/soc/imx/imx93-src.c b/drivers/soc/imx/imx93-src.c
new file mode 100644
index 000000000000..6f14c241538e
--- /dev/null
+++ b/drivers/soc/imx/imx93-src.c
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2022 NXP
+ */
+
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+static int imx93_src_probe(struct platform_device *pdev)
+{
+ return devm_of_platform_populate(&pdev->dev);
+}
+
+static const struct of_device_id imx93_dt_ids[] = {
+ { .compatible = "fsl,imx93-src" },
+ { }
+};
+
+static struct platform_driver imx93_src_driver = {
+ .driver = {
+ .name = "imx93_src",
+ .owner = THIS_MODULE,
+ .of_match_table = imx93_dt_ids,
+ },
+ .probe = imx93_src_probe,
+};
+module_platform_driver(imx93_src_driver);
+
+MODULE_AUTHOR("Peng Fan <[email protected]>");
+MODULE_DESCRIPTION("NXP i.MX93 src driver");
+MODULE_LICENSE("GPL");
--
2.25.1


2022-08-21 03:08:06

by Shawn Guo

[permalink] [raw]
Subject: Re: [PATCH V6 3/6] soc: imx: add i.MX93 SRC power domain driver

On Tue, Jul 19, 2022 at 03:35:38PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <[email protected]>
>
> Support controlling power domain managed by System Reset
> Controller(SRC). Current supported power domain is mediamix power
> domain.
>
> Signed-off-by: Peng Fan <[email protected]>
> ---
> drivers/soc/imx/Kconfig | 8 ++
> drivers/soc/imx/Makefile | 1 +
> drivers/soc/imx/imx93-pd.c | 163 ++++++++++++++++++++++++++++++++++++
> drivers/soc/imx/imx93-src.c | 32 +++++++

Shouldn't a reset driver go to drivers/reset/?

> 4 files changed, 204 insertions(+)
> create mode 100644 drivers/soc/imx/imx93-pd.c
> create mode 100644 drivers/soc/imx/imx93-src.c
>
> diff --git a/drivers/soc/imx/Kconfig b/drivers/soc/imx/Kconfig
> index a840494e849a..4b906791d6c7 100644
> --- a/drivers/soc/imx/Kconfig
> +++ b/drivers/soc/imx/Kconfig
> @@ -20,4 +20,12 @@ config SOC_IMX8M
> support, it will provide the SoC info like SoC family,
> ID and revision etc.
>
> +config SOC_IMX9
> + tristate "i.MX9 SoC family support"
> + depends on ARCH_MXC || COMPILE_TEST
> + default ARCH_MXC && ARM64
> + select SOC_BUS
> + help
> + If you say yes here, you get support for the NXP i.MX9 family
> +
> endmenu
> diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile
> index 63cd29f6d4d2..a0baa2a01adb 100644
> --- a/drivers/soc/imx/Makefile
> +++ b/drivers/soc/imx/Makefile
> @@ -7,3 +7,4 @@ obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
> obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o
> obj-$(CONFIG_SOC_IMX8M) += imx8m-blk-ctrl.o
> obj-$(CONFIG_SOC_IMX8M) += imx8mp-blk-ctrl.o
> +obj-$(CONFIG_SOC_IMX9) += imx93-src.o imx93-pd.o
> diff --git a/drivers/soc/imx/imx93-pd.c b/drivers/soc/imx/imx93-pd.c
> new file mode 100644
> index 000000000000..48437c303b78
> --- /dev/null
> +++ b/drivers/soc/imx/imx93-pd.c
> @@ -0,0 +1,163 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright 2022 NXP
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/of_device.h>
> +#include <linux/delay.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_domain.h>
> +
> +#define MIX_SLICE_SW_CTRL_OFF 0x20
> +#define SLICE_SW_CTRL_PSW_CTRL_OFF_MASK BIT(4)
> +#define SLICE_SW_CTRL_PDN_SOFT_MASK BIT(31)
> +
> +#define MIX_FUNC_STAT_OFF 0xB4
> +
> +#define FUNC_STAT_PSW_STAT_MASK BIT(0)
> +#define FUNC_STAT_RST_STAT_MASK BIT(2)
> +#define FUNC_STAT_ISO_STAT_MASK BIT(4)
> +
> +struct imx93_power_domain {
> + struct generic_pm_domain genpd;
> + struct device *dev;
> + void __iomem *addr;
> + struct clk_bulk_data *clks;
> + int num_clks;
> + bool init_off;
> +};
> +
> +#define to_imx93_pd(_genpd) container_of(_genpd, struct imx93_power_domain, genpd)
> +
> +static int imx93_pd_on(struct generic_pm_domain *genpd)
> +{
> + struct imx93_power_domain *domain = to_imx93_pd(genpd);
> + void __iomem *addr = domain->addr;
> + u32 val;
> + int ret;
> +
> + ret = clk_bulk_prepare_enable(domain->num_clks, domain->clks);
> + if (ret) {
> + dev_err(domain->dev, "failed to enable clocks for domain: %s\n", genpd->name);
> + return ret;
> + }
> +
> + val = readl(addr + MIX_SLICE_SW_CTRL_OFF);
> + val &= ~SLICE_SW_CTRL_PDN_SOFT_MASK;
> + writel(val, addr + MIX_SLICE_SW_CTRL_OFF);
> +
> + ret = readl_poll_timeout(addr + MIX_FUNC_STAT_OFF, val,
> + !(val & FUNC_STAT_ISO_STAT_MASK), 1, 10000);
> + if (ret) {
> + dev_err(domain->dev, "pd_on timeout: name: %s, stat: %x\n", genpd->name, val);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int imx93_pd_off(struct generic_pm_domain *genpd)
> +{
> + struct imx93_power_domain *domain = to_imx93_pd(genpd);
> + void __iomem *addr = domain->addr;
> + int ret;
> + u32 val;
> +
> + /* Power off MIX */
> + val = readl(addr + MIX_SLICE_SW_CTRL_OFF);
> + val |= SLICE_SW_CTRL_PDN_SOFT_MASK;
> + writel(val, addr + MIX_SLICE_SW_CTRL_OFF);
> +
> + ret = readl_poll_timeout(addr + MIX_FUNC_STAT_OFF, val,
> + val & FUNC_STAT_PSW_STAT_MASK, 1, 1000);
> + if (ret) {
> + dev_err(domain->dev, "pd_off timeout: name: %s, stat: %x\n", genpd->name, val);
> + return ret;
> + }
> +
> + clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
> +
> + return 0;
> +};
> +
> +static int imx93_pd_remove(struct platform_device *pdev)
> +{
> + struct imx93_power_domain *domain = platform_get_drvdata(pdev);
> + struct device *dev = &pdev->dev;
> + struct device_node *np = dev->of_node;
> +
> + if (!domain->init_off)
> + clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
> +
> + of_genpd_del_provider(np);
> + pm_genpd_remove(&domain->genpd);
> +
> + return 0;
> +}
> +
> +static int imx93_pd_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *np = dev->of_node;
> + struct imx93_power_domain *domain;
> + int ret;
> +
> + domain = devm_kzalloc(dev, sizeof(*domain), GFP_KERNEL);
> + if (!domain)
> + return -ENOMEM;

Have a newline.

> + domain->addr = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(domain->addr))
> + return PTR_ERR(domain->addr);
> +
> +

One newline is enough.

> + domain->num_clks = devm_clk_bulk_get_all(dev, &domain->clks);
> + if (domain->num_clks < 0)
> + return dev_err_probe(dev, domain->num_clks, "Failed to get domain's clocks\n");
> +
> + domain->genpd.name = dev_name(dev);
> + domain->genpd.power_off = imx93_pd_off;
> + domain->genpd.power_on = imx93_pd_on;
> + domain->dev = dev;
> +
> + domain->init_off = readl(domain->addr + MIX_FUNC_STAT_OFF) & FUNC_STAT_ISO_STAT_MASK;
> + /* Just to sync the status of hardware */
> + if (!domain->init_off) {
> + ret = clk_bulk_prepare_enable(domain->num_clks, domain->clks);
> + if (ret) {
> + dev_err(domain->dev, "failed to enable clocks for domain: %s\n",
> + domain->genpd.name);
> + return 0;

This is a case of success?

> + }
> + }
> +
> + ret = pm_genpd_init(&domain->genpd, NULL, domain->init_off);
> + if (ret)
> + return ret;
> +
> + platform_set_drvdata(pdev, domain);
> +
> + return of_genpd_add_provider_simple(np, &domain->genpd);
> +}
> +
> +static const struct of_device_id imx93_dt_ids[] = {
> + { .compatible = "fsl,imx93-src-slice" },
> + { }
> +};

MODULE_DEVICE_TABLE()?

Shawn

> +
> +static struct platform_driver imx93_power_domain_driver = {
> + .driver = {
> + .name = "imx93_power_domain",
> + .owner = THIS_MODULE,
> + .of_match_table = imx93_dt_ids,
> + },
> + .probe = imx93_pd_probe,
> + .remove = imx93_pd_remove,
> +};
> +module_platform_driver(imx93_power_domain_driver);
> +
> +MODULE_AUTHOR("Peng Fan <[email protected]>");
> +MODULE_DESCRIPTION("NXP i.MX93 power domain driver");
> +MODULE_LICENSE("GPL");

"GPL v2" since you have "SPDX-License-Identifier: GPL-2.0" claimed in
the beginning?

Shawn

> diff --git a/drivers/soc/imx/imx93-src.c b/drivers/soc/imx/imx93-src.c
> new file mode 100644
> index 000000000000..6f14c241538e
> --- /dev/null
> +++ b/drivers/soc/imx/imx93-src.c
> @@ -0,0 +1,32 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright 2022 NXP
> + */
> +
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +
> +static int imx93_src_probe(struct platform_device *pdev)
> +{
> + return devm_of_platform_populate(&pdev->dev);
> +}
> +
> +static const struct of_device_id imx93_dt_ids[] = {
> + { .compatible = "fsl,imx93-src" },
> + { }
> +};
> +
> +static struct platform_driver imx93_src_driver = {
> + .driver = {
> + .name = "imx93_src",
> + .owner = THIS_MODULE,
> + .of_match_table = imx93_dt_ids,
> + },
> + .probe = imx93_src_probe,
> +};
> +module_platform_driver(imx93_src_driver);
> +
> +MODULE_AUTHOR("Peng Fan <[email protected]>");
> +MODULE_DESCRIPTION("NXP i.MX93 src driver");
> +MODULE_LICENSE("GPL");
> --
> 2.25.1
>

2022-08-22 03:58:11

by Peng Fan

[permalink] [raw]
Subject: RE: [PATCH V6 3/6] soc: imx: add i.MX93 SRC power domain driver

> Subject: Re: [PATCH V6 3/6] soc: imx: add i.MX93 SRC power domain driver
>
> On Tue, Jul 19, 2022 at 03:35:38PM +0800, Peng Fan (OSS) wrote:
> > From: Peng Fan <[email protected]>
> >
> > Support controlling power domain managed by System Reset
> > Controller(SRC). Current supported power domain is mediamix power
> > domain.
> >
> > Signed-off-by: Peng Fan <[email protected]>
> > ---
> > drivers/soc/imx/Kconfig | 8 ++
> > drivers/soc/imx/Makefile | 1 +
> > drivers/soc/imx/imx93-pd.c | 163
> > ++++++++++++++++++++++++++++++++++++
> > drivers/soc/imx/imx93-src.c | 32 +++++++
>
> Shouldn't a reset driver go to drivers/reset/?

Although it is named system reset controller(SRC), it is not just for reset.
- Deals with all global system reset sources from other modules, and
generates global system reset.
- Responsible for power gating of MIXs (Slices) and their memory
low power control.

The reset feature is actually being handled by secure world. Currently I
use the driver to populate subnodes, otherwise the mixs driver
will not probe.

Thanks,
Peng.


>
> > 4 files changed, 204 insertions(+)
> > create mode 100644 drivers/soc/imx/imx93-pd.c create mode 100644
> > drivers/soc/imx/imx93-src.c
> >
> > diff --git a/drivers/soc/imx/Kconfig b/drivers/soc/imx/Kconfig index
> > a840494e849a..4b906791d6c7 100644
> > --- a/drivers/soc/imx/Kconfig
> > +++ b/drivers/soc/imx/Kconfig
> > @@ -20,4 +20,12 @@ config SOC_IMX8M
> > support, it will provide the SoC info like SoC family,
> > ID and revision etc.
> >
> > +config SOC_IMX9
> > + tristate "i.MX9 SoC family support"
> > + depends on ARCH_MXC || COMPILE_TEST
> > + default ARCH_MXC && ARM64
> > + select SOC_BUS
> > + help
> > + If you say yes here, you get support for the NXP i.MX9 family
> > +
> > endmenu
> > diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile index
> > 63cd29f6d4d2..a0baa2a01adb 100644
> > --- a/drivers/soc/imx/Makefile
> > +++ b/drivers/soc/imx/Makefile
> > @@ -7,3 +7,4 @@ obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
> > obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o
> > obj-$(CONFIG_SOC_IMX8M) += imx8m-blk-ctrl.o
> > obj-$(CONFIG_SOC_IMX8M) += imx8mp-blk-ctrl.o
> > +obj-$(CONFIG_SOC_IMX9) += imx93-src.o imx93-pd.o
> > diff --git a/drivers/soc/imx/imx93-pd.c b/drivers/soc/imx/imx93-pd.c
> > new file mode 100644 index 000000000000..48437c303b78
> > --- /dev/null
> > +++ b/drivers/soc/imx/imx93-pd.c
> > @@ -0,0 +1,163 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright 2022 NXP
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/of_device.h>
> > +#include <linux/delay.h>
> > +#include <linux/iopoll.h>
> > +#include <linux/module.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_domain.h>
> > +
> > +#define MIX_SLICE_SW_CTRL_OFF 0x20
> > +#define SLICE_SW_CTRL_PSW_CTRL_OFF_MASK BIT(4)
> > +#define SLICE_SW_CTRL_PDN_SOFT_MASK BIT(31)
> > +
> > +#define MIX_FUNC_STAT_OFF 0xB4
> > +
> > +#define FUNC_STAT_PSW_STAT_MASK BIT(0)
> > +#define FUNC_STAT_RST_STAT_MASK BIT(2)
> > +#define FUNC_STAT_ISO_STAT_MASK BIT(4)
> > +
> > +struct imx93_power_domain {
> > + struct generic_pm_domain genpd;
> > + struct device *dev;
> > + void __iomem *addr;
> > + struct clk_bulk_data *clks;
> > + int num_clks;
> > + bool init_off;
> > +};
> > +
> > +#define to_imx93_pd(_genpd) container_of(_genpd, struct
> > +imx93_power_domain, genpd)
> > +
> > +static int imx93_pd_on(struct generic_pm_domain *genpd) {
> > + struct imx93_power_domain *domain = to_imx93_pd(genpd);
> > + void __iomem *addr = domain->addr;
> > + u32 val;
> > + int ret;
> > +
> > + ret = clk_bulk_prepare_enable(domain->num_clks, domain->clks);
> > + if (ret) {
> > + dev_err(domain->dev, "failed to enable clocks for
> domain: %s\n", genpd->name);
> > + return ret;
> > + }
> > +
> > + val = readl(addr + MIX_SLICE_SW_CTRL_OFF);
> > + val &= ~SLICE_SW_CTRL_PDN_SOFT_MASK;
> > + writel(val, addr + MIX_SLICE_SW_CTRL_OFF);
> > +
> > + ret = readl_poll_timeout(addr + MIX_FUNC_STAT_OFF, val,
> > + !(val & FUNC_STAT_ISO_STAT_MASK), 1,
> 10000);
> > + if (ret) {
> > + dev_err(domain->dev, "pd_on timeout: name: %s,
> stat: %x\n", genpd->name, val);
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int imx93_pd_off(struct generic_pm_domain *genpd) {
> > + struct imx93_power_domain *domain = to_imx93_pd(genpd);
> > + void __iomem *addr = domain->addr;
> > + int ret;
> > + u32 val;
> > +
> > + /* Power off MIX */
> > + val = readl(addr + MIX_SLICE_SW_CTRL_OFF);
> > + val |= SLICE_SW_CTRL_PDN_SOFT_MASK;
> > + writel(val, addr + MIX_SLICE_SW_CTRL_OFF);
> > +
> > + ret = readl_poll_timeout(addr + MIX_FUNC_STAT_OFF, val,
> > + val & FUNC_STAT_PSW_STAT_MASK, 1,
> 1000);
> > + if (ret) {
> > + dev_err(domain->dev, "pd_off timeout: name: %s,
> stat: %x\n", genpd->name, val);
> > + return ret;
> > + }
> > +
> > + clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
> > +
> > + return 0;
> > +};
> > +
> > +static int imx93_pd_remove(struct platform_device *pdev) {
> > + struct imx93_power_domain *domain =
> platform_get_drvdata(pdev);
> > + struct device *dev = &pdev->dev;
> > + struct device_node *np = dev->of_node;
> > +
> > + if (!domain->init_off)
> > + clk_bulk_disable_unprepare(domain->num_clks, domain-
> >clks);
> > +
> > + of_genpd_del_provider(np);
> > + pm_genpd_remove(&domain->genpd);
> > +
> > + return 0;
> > +}
> > +
> > +static int imx93_pd_probe(struct platform_device *pdev) {
> > + struct device *dev = &pdev->dev;
> > + struct device_node *np = dev->of_node;
> > + struct imx93_power_domain *domain;
> > + int ret;
> > +
> > + domain = devm_kzalloc(dev, sizeof(*domain), GFP_KERNEL);
> > + if (!domain)
> > + return -ENOMEM;
>
> Have a newline.
>
> > + domain->addr = devm_platform_ioremap_resource(pdev, 0);
> > + if (IS_ERR(domain->addr))
> > + return PTR_ERR(domain->addr);
> > +
> > +
>
> One newline is enough.
>
> > + domain->num_clks = devm_clk_bulk_get_all(dev, &domain->clks);
> > + if (domain->num_clks < 0)
> > + return dev_err_probe(dev, domain->num_clks, "Failed to
> get domain's
> > +clocks\n");
> > +
> > + domain->genpd.name = dev_name(dev);
> > + domain->genpd.power_off = imx93_pd_off;
> > + domain->genpd.power_on = imx93_pd_on;
> > + domain->dev = dev;
> > +
> > + domain->init_off = readl(domain->addr + MIX_FUNC_STAT_OFF) &
> FUNC_STAT_ISO_STAT_MASK;
> > + /* Just to sync the status of hardware */
> > + if (!domain->init_off) {
> > + ret = clk_bulk_prepare_enable(domain->num_clks, domain-
> >clks);
> > + if (ret) {
> > + dev_err(domain->dev, "failed to enable clocks for
> domain: %s\n",
> > + domain->genpd.name);
> > + return 0;
>
> This is a case of success?
>
> > + }
> > + }
> > +
> > + ret = pm_genpd_init(&domain->genpd, NULL, domain->init_off);
> > + if (ret)
> > + return ret;
> > +
> > + platform_set_drvdata(pdev, domain);
> > +
> > + return of_genpd_add_provider_simple(np, &domain->genpd); }
> > +
> > +static const struct of_device_id imx93_dt_ids[] = {
> > + { .compatible = "fsl,imx93-src-slice" },
> > + { }
> > +};
>
> MODULE_DEVICE_TABLE()?
>
> Shawn
>
> > +
> > +static struct platform_driver imx93_power_domain_driver = {
> > + .driver = {
> > + .name = "imx93_power_domain",
> > + .owner = THIS_MODULE,
> > + .of_match_table = imx93_dt_ids,
> > + },
> > + .probe = imx93_pd_probe,
> > + .remove = imx93_pd_remove,
> > +};
> > +module_platform_driver(imx93_power_domain_driver);
> > +
> > +MODULE_AUTHOR("Peng Fan <[email protected]>");
> MODULE_DESCRIPTION("NXP
> > +i.MX93 power domain driver"); MODULE_LICENSE("GPL");
>
> "GPL v2" since you have "SPDX-License-Identifier: GPL-2.0" claimed in the
> beginning?
>
> Shawn
>
> > diff --git a/drivers/soc/imx/imx93-src.c b/drivers/soc/imx/imx93-src.c
> > new file mode 100644 index 000000000000..6f14c241538e
> > --- /dev/null
> > +++ b/drivers/soc/imx/imx93-src.c
> > @@ -0,0 +1,32 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright 2022 NXP
> > + */
> > +
> > +#include <linux/module.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/platform_device.h>
> > +
> > +static int imx93_src_probe(struct platform_device *pdev) {
> > + return devm_of_platform_populate(&pdev->dev);
> > +}
> > +
> > +static const struct of_device_id imx93_dt_ids[] = {
> > + { .compatible = "fsl,imx93-src" },
> > + { }
> > +};
> > +
> > +static struct platform_driver imx93_src_driver = {
> > + .driver = {
> > + .name = "imx93_src",
> > + .owner = THIS_MODULE,
> > + .of_match_table = imx93_dt_ids,
> > + },
> > + .probe = imx93_src_probe,
> > +};
> > +module_platform_driver(imx93_src_driver);
> > +
> > +MODULE_AUTHOR("Peng Fan <[email protected]>");
> MODULE_DESCRIPTION("NXP
> > +i.MX93 src driver"); MODULE_LICENSE("GPL");
> > --
> > 2.25.1
> >