Around a week ago I decided to test the acpismp=force boot time option
of the current -ac kernels, it worked great and I got the following
messages upon boot:
Nov 5 17:48:52 ledzep kernel: ACPI: Searched entire block, no RSDP was
found.
Nov 5 17:48:52 ledzep kernel: ACPI: RSDP located at physical address
c00f6f60
Nov 5 17:48:52 ledzep kernel: RSD PTR v0 [VIA694]
Nov 5 17:48:52 ledzep kernel: ACPI table found: RSDT v1 [VIA694
AWRDACPI 16944.11825]
Nov 5 17:48:52 ledzep kernel: ACPI table found: FACP v1 [VIA694
AWRDACPI 16944.11825]
Nov 5 17:48:52 ledzep kernel: ACPI table found: APIC v1 [VIA694
AWRDACPI 16944.11825]
Nov 5 17:48:52 ledzep kernel: LAPIC (acpi_id[0x0000] id[0x0]
enabled[1])
Nov 5 17:48:52 ledzep kernel: CPU 0 (0x0000) enabledProcessor #0
Pentium(tm) Pro APIC version 16
Nov 5 17:48:52 ledzep kernel:
Nov 5 17:48:52 ledzep kernel: LAPIC (acpi_id[0x0001] id[0x1]
enabled[1])
Nov 5 17:48:52 ledzep kernel: CPU 1 (0x0100) enabledProcessor #1
Pentium(tm) Pro APIC version 16
Nov 5 17:48:52 ledzep kernel:
Nov 5 17:48:52 ledzep kernel: IOAPIC (id[0x2] address[0xfec00000]
global_irq_base[0x0])
Nov 5 17:48:52 ledzep kernel: INT_SRC_OVR (bus[0] irq[0x0]
global_irq[0x2] polarity[0x0] trigger[0x0])
Nov 5 17:48:52 ledzep kernel: INT_SRC_OVR (bus[0] irq[0x9]
global_irq[0x9] polarity[0x0] trigger[0x0])
Nov 5 17:48:52 ledzep kernel: 2 CPUs total
Nov 5 17:48:52 ledzep kernel: Local APIC address fee00000
Nov 5 17:48:52 ledzep kernel: Enabling the CPU's according to the ACPI
table
Then while setting up a 2.4.15-pre4 kernel I noticed that it also had
this option now and decided to try it with that kernel as well, however
it has some mm/init.c error messages on boot, are these harmeless or if
not can they be fixed, here are the messages:
Nov 12 20:15:14 ledzep kernel: ACPI: Searched entire block, no RSDP was
found.
Nov 12 20:15:14 ledzep kernel: ACPI: RSDP located at physical address
c00f6f60
Nov 12 20:15:14 ledzep kernel: RSD PTR v0 [VIA694]
Nov 12 20:15:14 ledzep kernel: ACPI table found: RSDT v1 [VIA694
AWRDACPI 16944.11825]
Nov 12 20:15:14 ledzep kernel: init.c:147: bad pte 3fff3163.
Nov 12 20:15:14 ledzep kernel: ACPI table found: FACP v1 [VIA694
AWRDACPI 16944.11825]
Nov 12 20:15:14 ledzep kernel: init.c:147: bad pte 3fff3163.
Nov 12 20:15:14 ledzep kernel: ACPI table found: APIC v1 [VIA694
AWRDACPI 16944.11825]
Nov 12 20:15:14 ledzep kernel: init.c:147: bad pte 3fff5163.
Nov 12 20:15:14 ledzep kernel: LAPIC (acpi_id[0x0000] id[0x0]
enabled[1])
Nov 12 20:15:14 ledzep kernel: CPU 0 (0x0000) enabled Processor #0
Pentium(tm) Pro APIC version 16
Nov 12 20:15:14 ledzep kernel:
Nov 12 20:15:14 ledzep kernel: LAPIC (acpi_id[0x0001] id[0x1]
enabled[1])
Nov 12 20:15:14 ledzep kernel: CPU 1 (0x0100) enabled Processor #1
Pentium(tm) Pro APIC version 16
Nov 12 20:15:14 ledzep kernel:
Nov 12 20:15:14 ledzep kernel: IOAPIC (id[0x2] address[0xfec00000]
global_irq_base[0x0])
Nov 12 20:15:14 ledzep kernel: INT_SRC_OVR (bus[0] irq[0x0]
global_irq[0x2] polarity[0x0] trigger[0x0])
Nov 12 20:15:14 ledzep kernel: INT_SRC_OVR (bus[0] irq[0x7]
global_irq[0x7] polarity[0x0] trigger[0x0])
Nov 12 20:15:14 ledzep kernel: 2 CPUs total
Nov 12 20:15:14 ledzep kernel: Local APIC address fee00000
Nov 12 20:15:14 ledzep kernel: Enabling the CPU's according to the ACPI
table
Thank you for any help in figuring out what these messages mean. BTW,
these messages only appear when booting 2.4.15-pre4 using acpismp=force
not when booting the same kernel without the option specified.
Jordan
In article <[email protected]> you wrote:
> Around a week ago I decided to test the acpismp=force boot time option
> of the current -ac kernels, it worked great and I got the following
> messages upon boot:
> Nov 12 20:15:14 ledzep kernel: init.c:147: bad pte 3fff3163.
Yes known problem; I'm figuring out how to fix this properly instead of with
the hack that is currently used...