From: Cliff Wickman <[email protected]>
This patch fixes BAU initialization for systems containing
nodes with no memory and for systems with non-consecutive
node numbers.
Fixes and clarifies situations where pnode should be used instead
of node id.
Tested on the UV hardware simulator.
Diffed against 2.6.29
Signed-off-by: Cliff Wickman <[email protected]>
---
arch/x86/kernel/tlb_uv.c | 108 ++++++++++++++++++++++++++---------------------
1 file changed, 61 insertions(+), 47 deletions(-)
Index: linux/arch/x86/kernel/tlb_uv.c
===================================================================
--- linux.orig/arch/x86/kernel/tlb_uv.c
+++ linux/arch/x86/kernel/tlb_uv.c
@@ -32,6 +32,34 @@ static DEFINE_PER_CPU(struct ptc_stats,
static DEFINE_PER_CPU(struct bau_control, bau_control);
/*
+ * Determine the first node on a blade.
+ */
+static int __init blade_to_first_node(int blade)
+{
+ int node, b;
+
+ for_each_online_node(node) {
+ b = uv_node_to_blade_id(node);
+ if (blade == b)
+ return node;
+ }
+ BUG();
+}
+
+/*
+ * Determine the apicid of the first cpu on a blade.
+ */
+static int __init blade_to_first_apicid(int blade)
+{
+ int cpu;
+
+ for_each_present_cpu(cpu)
+ if (blade == uv_cpu_to_blade_id(cpu))
+ return per_cpu(x86_cpu_to_apicid, cpu);
+ return -1;
+}
+
+/*
* Free a software acknowledge hardware resource by clearing its Pending
* bit. This will return a reply to the sender.
* If the message has timed out, a reply has already been sent by the
@@ -67,7 +95,7 @@ static void uv_bau_process_message(struc
msp = __get_cpu_var(bau_control).msg_statuses + msg_slot;
cpu = uv_blade_processor_id();
msg->number_of_cpus =
- uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id()));
+ uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id()));
this_cpu_mask = 1UL << cpu;
if (msp->seen_by.bits & this_cpu_mask)
return;
@@ -215,14 +243,14 @@ static int uv_wait_completion(struct bau
* Returns @flush_mask if some remote flushing remains to be done. The
* mask will have some bits still set.
*/
-const struct cpumask *uv_flush_send_and_wait(int cpu, int this_blade,
+const struct cpumask *uv_flush_send_and_wait(int cpu, int this_pnode,
struct bau_desc *bau_desc,
struct cpumask *flush_mask)
{
int completion_status = 0;
int right_shift;
int tries = 0;
- int blade;
+ int pnode;
int bit;
unsigned long mmr_offset;
unsigned long index;
@@ -265,8 +293,8 @@ const struct cpumask *uv_flush_send_and_
* use the IPI method of shootdown on them.
*/
for_each_cpu(bit, flush_mask) {
- blade = uv_cpu_to_blade_id(bit);
- if (blade == this_blade)
+ pnode = uv_cpu_to_pnode(bit);
+ if (pnode == this_pnode)
continue;
cpumask_clear_cpu(bit, flush_mask);
}
@@ -309,16 +337,16 @@ const struct cpumask *uv_flush_tlb_other
struct cpumask *flush_mask = __get_cpu_var(uv_flush_tlb_mask);
int i;
int bit;
- int blade;
+ int pnode;
int uv_cpu;
- int this_blade;
+ int this_pnode;
int locals = 0;
struct bau_desc *bau_desc;
cpumask_andnot(flush_mask, cpumask, cpumask_of(cpu));
uv_cpu = uv_blade_processor_id();
- this_blade = uv_numa_blade_id();
+ this_pnode = uv_hub_info->pnode;
bau_desc = __get_cpu_var(bau_control).descriptor_base;
bau_desc += UV_ITEMS_PER_DESCRIPTOR * uv_cpu;
@@ -326,13 +354,13 @@ const struct cpumask *uv_flush_tlb_other
i = 0;
for_each_cpu(bit, flush_mask) {
- blade = uv_cpu_to_blade_id(bit);
- BUG_ON(blade > (UV_DISTRIBUTION_SIZE - 1));
- if (blade == this_blade) {
+ pnode = uv_cpu_to_pnode(bit);
+ BUG_ON(pnode > (UV_DISTRIBUTION_SIZE - 1));
+ if (pnode == this_pnode) {
locals++;
continue;
}
- bau_node_set(blade, &bau_desc->distribution);
+ bau_node_set(pnode, &bau_desc->distribution);
i++;
}
if (i == 0) {
@@ -350,7 +378,7 @@ const struct cpumask *uv_flush_tlb_other
bau_desc->payload.address = va;
bau_desc->payload.sending_cpu = cpu;
- return uv_flush_send_and_wait(uv_cpu, this_blade, bau_desc, flush_mask);
+ return uv_flush_send_and_wait(uv_cpu, this_pnode, bau_desc, flush_mask);
}
/*
@@ -482,8 +510,7 @@ static int uv_ptc_seq_show(struct seq_fi
stat->requestee, stat->onetlb, stat->alltlb,
stat->s_retry, stat->d_retry, stat->ptc_i);
seq_printf(file, "%lx %ld %ld %ld %ld %ld %ld\n",
- uv_read_global_mmr64(uv_blade_to_pnode
- (uv_cpu_to_blade_id(cpu)),
+ uv_read_global_mmr64(uv_cpu_to_pnode(cpu),
UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE),
stat->sflush, stat->dflush,
stat->retriesok, stat->nomsg,
@@ -617,16 +644,18 @@ static struct bau_control * __init uv_ta
* finish the initialization of the per-blade control structures
*/
static void __init
-uv_table_bases_finish(int blade, int node, int cur_cpu,
+uv_table_bases_finish(int blade,
struct bau_control *bau_tablesp,
struct bau_desc *adp)
{
struct bau_control *bcp;
- int i;
+ int cpu;
- for (i = cur_cpu; i < cur_cpu + uv_blade_nr_possible_cpus(blade); i++) {
- bcp = (struct bau_control *)&per_cpu(bau_control, i);
+ for_each_present_cpu(cpu) {
+ if (blade != uv_cpu_to_blade_id(cpu))
+ continue;
+ bcp = (struct bau_control *)&per_cpu(bau_control, cpu);
bcp->bau_msg_head = bau_tablesp->va_queue_first;
bcp->va_queue_first = bau_tablesp->va_queue_first;
bcp->va_queue_last = bau_tablesp->va_queue_last;
@@ -649,8 +678,7 @@ uv_activation_descriptor_init(int node,
struct bau_desc *adp;
struct bau_desc *ad2;
- adp = (struct bau_desc *)
- kmalloc_node(16384, GFP_KERNEL, node);
+ adp = (struct bau_desc *)kmalloc_node(16384, GFP_KERNEL, node);
BUG_ON(!adp);
pa = __pa((unsigned long)adp);
@@ -667,8 +695,7 @@ uv_activation_descriptor_init(int node,
for (i = 0, ad2 = adp; i < UV_ACTIVATION_DESCRIPTOR_SIZE; i++, ad2++) {
memset(ad2, 0, sizeof(struct bau_desc));
ad2->header.sw_ack_flag = 1;
- ad2->header.base_dest_nodeid =
- uv_blade_to_pnode(uv_cpu_to_blade_id(0));
+ ad2->header.base_dest_nodeid = uv_cpu_to_pnode(0);
ad2->header.command = UV_NET_ENDPOINT_INTD;
ad2->header.int_both = 1;
/*
@@ -715,8 +742,9 @@ uv_payload_queue_init(int node, int pnod
/*
* Initialization of each UV blade's structures
*/
-static int __init uv_init_blade(int blade, int node, int cur_cpu)
+static int __init uv_init_blade(int blade)
{
+ int node;
int pnode;
unsigned long pa;
unsigned long apicid;
@@ -724,16 +752,17 @@ static int __init uv_init_blade(int blad
struct bau_payload_queue_entry *pqp;
struct bau_control *bau_tablesp;
+ node = blade_to_first_node(blade);
bau_tablesp = uv_table_bases_init(blade, node);
pnode = uv_blade_to_pnode(blade);
adp = uv_activation_descriptor_init(node, pnode);
pqp = uv_payload_queue_init(node, pnode, bau_tablesp);
- uv_table_bases_finish(blade, node, cur_cpu, bau_tablesp, adp);
+ uv_table_bases_finish(blade, bau_tablesp, adp);
/*
* the below initialization can't be in firmware because the
* messaging IRQ will be determined by the OS
*/
- apicid = per_cpu(x86_cpu_to_apicid, cur_cpu);
+ apicid = blade_to_first_apicid(blade);
pa = uv_read_global_mmr64(pnode, UVH_BAU_DATA_CONFIG);
if ((pa & 0xff) != UV_BAU_MESSAGE) {
uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG,
@@ -748,9 +777,7 @@ static int __init uv_init_blade(int blad
static int __init uv_bau_init(void)
{
int blade;
- int node;
int nblades;
- int last_blade;
int cur_cpu;
if (!is_uv_system())
@@ -763,29 +790,16 @@ static int __init uv_bau_init(void)
uv_bau_retry_limit = 1;
uv_nshift = uv_hub_info->n_val;
uv_mmask = (1UL << uv_hub_info->n_val) - 1;
- nblades = 0;
- last_blade = -1;
- cur_cpu = 0;
- for_each_online_node(node) {
- blade = uv_node_to_blade_id(node);
- if (blade == last_blade)
- continue;
- last_blade = blade;
- nblades++;
- }
+ nblades = uv_num_possible_blades();
+
uv_bau_table_bases = (struct bau_control **)
kmalloc(nblades * sizeof(struct bau_control *), GFP_KERNEL);
BUG_ON(!uv_bau_table_bases);
- last_blade = -1;
- for_each_online_node(node) {
- blade = uv_node_to_blade_id(node);
- if (blade == last_blade)
- continue;
- last_blade = blade;
- uv_init_blade(blade, node, cur_cpu);
- cur_cpu += uv_blade_nr_possible_cpus(blade);
- }
+ for (blade = 0; blade < nblades; blade++)
+ if (uv_blade_nr_possible_cpus(blade))
+ uv_init_blade(blade);
+
alloc_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1);
uv_enable_timeouts();
Commit-ID: 9674f35b1ec17577163897f052f405c1e9e5893d
Gitweb: http://git.kernel.org/tip/9674f35b1ec17577163897f052f405c1e9e5893d
Author: Cliff Wickman <[email protected]>
AuthorDate: Fri, 3 Apr 2009 08:34:05 -0500
Committer: Ingo Molnar <[email protected]>
CommitDate: Fri, 3 Apr 2009 18:25:26 +0200
x86: UV BAU and nodes with no memory
This patch fixes BAU initialization for systems containing
nodes with no memory and for systems with non-consecutive
node numbers.
Fixes and clarifies situations where pnode should be used instead
of node id.
Tested on the UV hardware simulator.
Signed-off-by: Cliff Wickman <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
---
arch/x86/kernel/tlb_uv.c | 108 ++++++++++++++++++++++++++--------------------
1 files changed, 61 insertions(+), 47 deletions(-)
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 79c0732..b833bc6 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -32,6 +32,34 @@ static DEFINE_PER_CPU(struct ptc_stats, ptcstats);
static DEFINE_PER_CPU(struct bau_control, bau_control);
/*
+ * Determine the first node on a blade.
+ */
+static int __init blade_to_first_node(int blade)
+{
+ int node, b;
+
+ for_each_online_node(node) {
+ b = uv_node_to_blade_id(node);
+ if (blade == b)
+ return node;
+ }
+ BUG();
+}
+
+/*
+ * Determine the apicid of the first cpu on a blade.
+ */
+static int __init blade_to_first_apicid(int blade)
+{
+ int cpu;
+
+ for_each_present_cpu(cpu)
+ if (blade == uv_cpu_to_blade_id(cpu))
+ return per_cpu(x86_cpu_to_apicid, cpu);
+ return -1;
+}
+
+/*
* Free a software acknowledge hardware resource by clearing its Pending
* bit. This will return a reply to the sender.
* If the message has timed out, a reply has already been sent by the
@@ -67,7 +95,7 @@ static void uv_bau_process_message(struct bau_payload_queue_entry *msg,
msp = __get_cpu_var(bau_control).msg_statuses + msg_slot;
cpu = uv_blade_processor_id();
msg->number_of_cpus =
- uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id()));
+ uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id()));
this_cpu_mask = 1UL << cpu;
if (msp->seen_by.bits & this_cpu_mask)
return;
@@ -215,14 +243,14 @@ static int uv_wait_completion(struct bau_desc *bau_desc,
* Returns @flush_mask if some remote flushing remains to be done. The
* mask will have some bits still set.
*/
-const struct cpumask *uv_flush_send_and_wait(int cpu, int this_blade,
+const struct cpumask *uv_flush_send_and_wait(int cpu, int this_pnode,
struct bau_desc *bau_desc,
struct cpumask *flush_mask)
{
int completion_status = 0;
int right_shift;
int tries = 0;
- int blade;
+ int pnode;
int bit;
unsigned long mmr_offset;
unsigned long index;
@@ -265,8 +293,8 @@ const struct cpumask *uv_flush_send_and_wait(int cpu, int this_blade,
* use the IPI method of shootdown on them.
*/
for_each_cpu(bit, flush_mask) {
- blade = uv_cpu_to_blade_id(bit);
- if (blade == this_blade)
+ pnode = uv_cpu_to_pnode(bit);
+ if (pnode == this_pnode)
continue;
cpumask_clear_cpu(bit, flush_mask);
}
@@ -308,16 +336,16 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
struct cpumask *flush_mask = &__get_cpu_var(flush_tlb_mask);
int i;
int bit;
- int blade;
+ int pnode;
int uv_cpu;
- int this_blade;
+ int this_pnode;
int locals = 0;
struct bau_desc *bau_desc;
cpumask_andnot(flush_mask, cpumask, cpumask_of(cpu));
uv_cpu = uv_blade_processor_id();
- this_blade = uv_numa_blade_id();
+ this_pnode = uv_hub_info->pnode;
bau_desc = __get_cpu_var(bau_control).descriptor_base;
bau_desc += UV_ITEMS_PER_DESCRIPTOR * uv_cpu;
@@ -325,13 +353,13 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
i = 0;
for_each_cpu(bit, flush_mask) {
- blade = uv_cpu_to_blade_id(bit);
- BUG_ON(blade > (UV_DISTRIBUTION_SIZE - 1));
- if (blade == this_blade) {
+ pnode = uv_cpu_to_pnode(bit);
+ BUG_ON(pnode > (UV_DISTRIBUTION_SIZE - 1));
+ if (pnode == this_pnode) {
locals++;
continue;
}
- bau_node_set(blade, &bau_desc->distribution);
+ bau_node_set(pnode, &bau_desc->distribution);
i++;
}
if (i == 0) {
@@ -349,7 +377,7 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
bau_desc->payload.address = va;
bau_desc->payload.sending_cpu = cpu;
- return uv_flush_send_and_wait(uv_cpu, this_blade, bau_desc, flush_mask);
+ return uv_flush_send_and_wait(uv_cpu, this_pnode, bau_desc, flush_mask);
}
/*
@@ -481,8 +509,7 @@ static int uv_ptc_seq_show(struct seq_file *file, void *data)
stat->requestee, stat->onetlb, stat->alltlb,
stat->s_retry, stat->d_retry, stat->ptc_i);
seq_printf(file, "%lx %ld %ld %ld %ld %ld %ld\n",
- uv_read_global_mmr64(uv_blade_to_pnode
- (uv_cpu_to_blade_id(cpu)),
+ uv_read_global_mmr64(uv_cpu_to_pnode(cpu),
UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE),
stat->sflush, stat->dflush,
stat->retriesok, stat->nomsg,
@@ -616,16 +643,18 @@ static struct bau_control * __init uv_table_bases_init(int blade, int node)
* finish the initialization of the per-blade control structures
*/
static void __init
-uv_table_bases_finish(int blade, int node, int cur_cpu,
+uv_table_bases_finish(int blade,
struct bau_control *bau_tablesp,
struct bau_desc *adp)
{
struct bau_control *bcp;
- int i;
+ int cpu;
- for (i = cur_cpu; i < cur_cpu + uv_blade_nr_possible_cpus(blade); i++) {
- bcp = (struct bau_control *)&per_cpu(bau_control, i);
+ for_each_present_cpu(cpu) {
+ if (blade != uv_cpu_to_blade_id(cpu))
+ continue;
+ bcp = (struct bau_control *)&per_cpu(bau_control, cpu);
bcp->bau_msg_head = bau_tablesp->va_queue_first;
bcp->va_queue_first = bau_tablesp->va_queue_first;
bcp->va_queue_last = bau_tablesp->va_queue_last;
@@ -648,8 +677,7 @@ uv_activation_descriptor_init(int node, int pnode)
struct bau_desc *adp;
struct bau_desc *ad2;
- adp = (struct bau_desc *)
- kmalloc_node(16384, GFP_KERNEL, node);
+ adp = (struct bau_desc *)kmalloc_node(16384, GFP_KERNEL, node);
BUG_ON(!adp);
pa = __pa((unsigned long)adp);
@@ -666,8 +694,7 @@ uv_activation_descriptor_init(int node, int pnode)
for (i = 0, ad2 = adp; i < UV_ACTIVATION_DESCRIPTOR_SIZE; i++, ad2++) {
memset(ad2, 0, sizeof(struct bau_desc));
ad2->header.sw_ack_flag = 1;
- ad2->header.base_dest_nodeid =
- uv_blade_to_pnode(uv_cpu_to_blade_id(0));
+ ad2->header.base_dest_nodeid = uv_cpu_to_pnode(0);
ad2->header.command = UV_NET_ENDPOINT_INTD;
ad2->header.int_both = 1;
/*
@@ -714,8 +741,9 @@ uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp)
/*
* Initialization of each UV blade's structures
*/
-static int __init uv_init_blade(int blade, int node, int cur_cpu)
+static int __init uv_init_blade(int blade)
{
+ int node;
int pnode;
unsigned long pa;
unsigned long apicid;
@@ -723,16 +751,17 @@ static int __init uv_init_blade(int blade, int node, int cur_cpu)
struct bau_payload_queue_entry *pqp;
struct bau_control *bau_tablesp;
+ node = blade_to_first_node(blade);
bau_tablesp = uv_table_bases_init(blade, node);
pnode = uv_blade_to_pnode(blade);
adp = uv_activation_descriptor_init(node, pnode);
pqp = uv_payload_queue_init(node, pnode, bau_tablesp);
- uv_table_bases_finish(blade, node, cur_cpu, bau_tablesp, adp);
+ uv_table_bases_finish(blade, bau_tablesp, adp);
/*
* the below initialization can't be in firmware because the
* messaging IRQ will be determined by the OS
*/
- apicid = per_cpu(x86_cpu_to_apicid, cur_cpu);
+ apicid = blade_to_first_apicid(blade);
pa = uv_read_global_mmr64(pnode, UVH_BAU_DATA_CONFIG);
if ((pa & 0xff) != UV_BAU_MESSAGE) {
uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG,
@@ -747,9 +776,7 @@ static int __init uv_init_blade(int blade, int node, int cur_cpu)
static int __init uv_bau_init(void)
{
int blade;
- int node;
int nblades;
- int last_blade;
int cur_cpu;
if (!is_uv_system())
@@ -758,29 +785,16 @@ static int __init uv_bau_init(void)
uv_bau_retry_limit = 1;
uv_nshift = uv_hub_info->n_val;
uv_mmask = (1UL << uv_hub_info->n_val) - 1;
- nblades = 0;
- last_blade = -1;
- cur_cpu = 0;
- for_each_online_node(node) {
- blade = uv_node_to_blade_id(node);
- if (blade == last_blade)
- continue;
- last_blade = blade;
- nblades++;
- }
+ nblades = uv_num_possible_blades();
+
uv_bau_table_bases = (struct bau_control **)
kmalloc(nblades * sizeof(struct bau_control *), GFP_KERNEL);
BUG_ON(!uv_bau_table_bases);
- last_blade = -1;
- for_each_online_node(node) {
- blade = uv_node_to_blade_id(node);
- if (blade == last_blade)
- continue;
- last_blade = blade;
- uv_init_blade(blade, node, cur_cpu);
- cur_cpu += uv_blade_nr_possible_cpus(blade);
- }
+ for (blade = 0; blade < nblades; blade++)
+ if (uv_blade_nr_possible_cpus(blade))
+ uv_init_blade(blade);
+
alloc_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1);
uv_enable_timeouts();