This patch adds support for ROHM BD28623MUV class D speaker
amplifier codec driver.
This driver only refers information of HW specification document
that can be derivered at website of ROHM.
http://www.rohm.com/web/global/products/-/product/BD28623MUV
---
Changes in v2:
- Change gpio properties to optional
- Change VCCA, VCCP-supply to mandatory
- Fix lisence comment style
- Use _cansleep() version for manipulating GPIO
- Use ASoC component remove() function instead of
platform remove() function to power off this IC
- Remove update function that was just alias of gpiod_set_value
Katsuhiro Suzuki (2):
ASoC: add DT bindings documentation for ROHM BD28623 codec
ASoC: support ROHM BD28623 codec
.../devicetree/bindings/sound/rohm,bd28623.txt | 29 +++
sound/soc/codecs/Kconfig | 8 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/bd28623.c | 242 +++++++++++++++++++++
4 files changed, 281 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/rohm,bd28623.txt
create mode 100644 sound/soc/codecs/bd28623.c
--
2.16.1
This patch adds DT bindings documentation for ROHM BD28623MUV
class D speaker amplifier.
Signed-off-by: Katsuhiro Suzuki <[email protected]>
---
Changes in v2:
- Change gpio properties to optional
- Change VCCA, VCCP-supply to mandatory
---
.../devicetree/bindings/sound/rohm,bd28623.txt | 29 ++++++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/rohm,bd28623.txt
diff --git a/Documentation/devicetree/bindings/sound/rohm,bd28623.txt b/Documentation/devicetree/bindings/sound/rohm,bd28623.txt
new file mode 100644
index 000000000000..d84557c2686e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rohm,bd28623.txt
@@ -0,0 +1,29 @@
+ROHM BD28623MUV Class D speaker amplifier for digital input
+
+This codec does not have any control buses such as I2C, it detect format and
+rate of I2S signal automatically. It has two signals that can be connected
+to GPIOs: reset and mute.
+
+Required properties:
+- compatible : should be "rohm,bd28623"
+- #sound-dai-cells: should be 0.
+- VCCA-supply : regulator phandle for the VCCA supply
+- VCCP1-supply : regulator phandle for the VCCP1 supply
+- VCCP2-supply : regulator phandle for the VCCP2 supply
+
+Optional properties:
+- reset-gpios : GPIO specifier for the active low reset line
+- mute-gpios : GPIO specifier for the active low mute line
+
+Example:
+
+ codec {
+ compatible = "rohm,bd28623";
+ #sound-dai-cells = <0>;
+
+ VCCA-supply = <&vcc_reg>;
+ VCCP1-supply = <&vcc_reg>;
+ VCCP2-supply = <&vcc_reg>;
+ reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ mute-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
--
2.16.1
This patch adds support of the ROHM BD28623MUV
Class D speaker amplifier for Flat-panel TVs.
This IC delivers an output power of 20W + 20W.
Signed-off-by: Katsuhiro Suzuki <[email protected]>
---
Changes in v2:
- Fix lisence comment style
- Use _cansleep() version for manipulating GPIO
- Use ASoC component remove() function instead of
platform remove() function to power off this IC
- Remove update function that was just alias of gpiod_set_value
---
sound/soc/codecs/Kconfig | 8 ++
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/bd28623.c | 242 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 252 insertions(+)
create mode 100644 sound/soc/codecs/bd28623.c
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index f72a90104a58..6a53e188ead6 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -47,6 +47,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_ALC5623 if I2C
select SND_SOC_ALC5632 if I2C
select SND_SOC_BT_SCO
+ select SND_SOC_BD28623
select SND_SOC_CQ0093VC
select SND_SOC_CS35L32 if I2C
select SND_SOC_CS35L33 if I2C
@@ -418,6 +419,13 @@ config SND_SOC_ALC5623
config SND_SOC_ALC5632
tristate
+config SND_SOC_BD28623
+ tristate "ROHM BD28623 CODEC"
+ help
+ Enable support for ROHM BD28623MUV Class D speaker amplifier.
+ This codec does not have any control buses such as I2C, it
+ detect format of I2S automatically.
+
config SND_SOC_BT_SCO
tristate "Dummy BT SCO codec driver"
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index 56c3252820d2..f2c710e16557 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -37,6 +37,7 @@ snd-soc-ak4671-objs := ak4671.o
snd-soc-ak5386-objs := ak5386.o
snd-soc-ak5558-objs := ak5558.o
snd-soc-arizona-objs := arizona.o
+snd-soc-bd28623-objs := bd28623.o
snd-soc-bt-sco-objs := bt-sco.o
snd-soc-cq93vc-objs := cq93vc.o
snd-soc-cs35l32-objs := cs35l32.o
@@ -285,6 +286,7 @@ obj-$(CONFIG_SND_SOC_AK5558) += snd-soc-ak5558.o
obj-$(CONFIG_SND_SOC_ALC5623) += snd-soc-alc5623.o
obj-$(CONFIG_SND_SOC_ALC5632) += snd-soc-alc5632.o
obj-$(CONFIG_SND_SOC_ARIZONA) += snd-soc-arizona.o
+obj-$(CONFIG_SND_SOC_BD28623) += snd-soc-bd28623.o
obj-$(CONFIG_SND_SOC_BT_SCO) += snd-soc-bt-sco.o
obj-$(CONFIG_SND_SOC_CQ0093VC) += snd-soc-cq93vc.o
obj-$(CONFIG_SND_SOC_CS35L32) += snd-soc-cs35l32.o
diff --git a/sound/soc/codecs/bd28623.c b/sound/soc/codecs/bd28623.c
new file mode 100644
index 000000000000..31904ef5c88b
--- /dev/null
+++ b/sound/soc/codecs/bd28623.c
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// ROHM BD28623MUV class D speaker amplifier codec driver.
+//
+// Copyright (c) 2018 Socionext Inc.
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+
+#define BD28623_NUM_SUPPLIES 3
+
+static const char *const bd28623_supply_names[BD28623_NUM_SUPPLIES] = {
+ "VCCA",
+ "VCCP1",
+ "VCCP2",
+};
+
+struct bd28623_priv {
+ struct device *dev;
+ struct regulator_bulk_data supplies[BD28623_NUM_SUPPLIES];
+ struct gpio_desc *reset_gpio;
+ struct gpio_desc *mute_gpio;
+
+ int switch_spk;
+};
+
+static const struct snd_soc_dapm_widget bd28623_widgets[] = {
+ SND_SOC_DAPM_DAC("DAC", "Playback", SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_OUTPUT("OUT1P"),
+ SND_SOC_DAPM_OUTPUT("OUT1N"),
+ SND_SOC_DAPM_OUTPUT("OUT2P"),
+ SND_SOC_DAPM_OUTPUT("OUT2N"),
+};
+
+static const struct snd_soc_dapm_route bd28623_routes[] = {
+ { "OUT1P", NULL, "DAC" },
+ { "OUT1N", NULL, "DAC" },
+ { "OUT2P", NULL, "DAC" },
+ { "OUT2N", NULL, "DAC" },
+};
+
+static int bd28623_power_on(struct bd28623_priv *bd)
+{
+ int ret;
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(bd->supplies), bd->supplies);
+ if (ret) {
+ dev_err(bd->dev, "Failed to enable supplies: %d\n", ret);
+ return ret;
+ }
+
+ gpiod_set_value_cansleep(bd->reset_gpio, 0);
+ usleep_range(300000, 400000);
+
+ return 0;
+}
+
+static void bd28623_power_off(struct bd28623_priv *bd)
+{
+ gpiod_set_value_cansleep(bd->reset_gpio, 1);
+
+ regulator_bulk_disable(ARRAY_SIZE(bd->supplies), bd->supplies);
+}
+
+static int bd28623_get_switch_spk(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component =
+ snd_soc_kcontrol_component(kcontrol);
+ struct bd28623_priv *bd = snd_soc_component_get_drvdata(component);
+
+ ucontrol->value.integer.value[0] = bd->switch_spk;
+
+ return 0;
+}
+
+static int bd28623_set_switch_spk(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component =
+ snd_soc_kcontrol_component(kcontrol);
+ struct bd28623_priv *bd = snd_soc_component_get_drvdata(component);
+
+ if (bd->switch_spk == ucontrol->value.integer.value[0])
+ return 0;
+
+ bd->switch_spk = ucontrol->value.integer.value[0];
+
+ gpiod_set_value_cansleep(bd->mute_gpio, bd->switch_spk ? 0 : 1);
+
+ return 0;
+}
+
+static const struct snd_kcontrol_new bd28623_controls[] = {
+ SOC_SINGLE_BOOL_EXT("Speaker Switch", 0,
+ bd28623_get_switch_spk, bd28623_set_switch_spk),
+};
+
+static int bd28623_codec_probe(struct snd_soc_component *component)
+{
+ struct bd28623_priv *bd = snd_soc_component_get_drvdata(component);
+ int ret;
+
+ bd->switch_spk = 1;
+
+ ret = bd28623_power_on(bd);
+ if (ret)
+ return ret;
+
+ gpiod_set_value_cansleep(bd->mute_gpio, bd->switch_spk ? 0 : 1);
+
+ return 0;
+}
+
+static void bd28623_codec_remove(struct snd_soc_component *component)
+{
+ struct bd28623_priv *bd = snd_soc_component_get_drvdata(component);
+
+ bd28623_power_off(bd);
+}
+
+static int bd28623_codec_suspend(struct snd_soc_component *component)
+{
+ struct bd28623_priv *bd = snd_soc_component_get_drvdata(component);
+
+ bd28623_power_off(bd);
+
+ return 0;
+}
+
+static int bd28623_codec_resume(struct snd_soc_component *component)
+{
+ struct bd28623_priv *bd = snd_soc_component_get_drvdata(component);
+ int ret;
+
+ ret = bd28623_power_on(bd);
+ if (ret)
+ return ret;
+
+ gpiod_set_value_cansleep(bd->mute_gpio, bd->switch_spk ? 0 : 1);
+
+ return 0;
+}
+
+static const struct snd_soc_component_driver soc_codec_bd = {
+ .probe = bd28623_codec_probe,
+ .remove = bd28623_codec_remove,
+ .suspend = bd28623_codec_suspend,
+ .resume = bd28623_codec_resume,
+ .dapm_widgets = bd28623_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(bd28623_widgets),
+ .dapm_routes = bd28623_routes,
+ .num_dapm_routes = ARRAY_SIZE(bd28623_routes),
+ .controls = bd28623_controls,
+ .num_controls = ARRAY_SIZE(bd28623_controls),
+ .idle_bias_on = 1,
+ .use_pmdown_time = 1,
+ .endianness = 1,
+ .non_legacy_dai_naming = 1,
+};
+
+static struct snd_soc_dai_driver soc_dai_bd = {
+ .name = "bd28623-speaker",
+ .playback = {
+ .stream_name = "Playback",
+ .formats = SNDRV_PCM_FMTBIT_S32_LE |
+ SNDRV_PCM_FMTBIT_S24_LE |
+ SNDRV_PCM_FMTBIT_S16_LE,
+ .rates = SNDRV_PCM_RATE_48000 |
+ SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_32000,
+ .channels_min = 2,
+ .channels_max = 2,
+ },
+};
+
+static int bd28623_probe(struct platform_device *pdev)
+{
+ struct bd28623_priv *bd;
+ struct device *dev = &pdev->dev;
+ int i, ret;
+
+ bd = devm_kzalloc(&pdev->dev, sizeof(struct bd28623_priv), GFP_KERNEL);
+ if (!bd)
+ return -ENOMEM;
+
+ for (i = 0; i < ARRAY_SIZE(bd->supplies); i++)
+ bd->supplies[i].supply = bd28623_supply_names[i];
+
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(bd->supplies),
+ bd->supplies);
+ if (ret) {
+ dev_err(dev, "Failed to get supplies: %d\n", ret);
+ return ret;
+ }
+
+ bd->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(bd->reset_gpio)) {
+ dev_err(dev, "Failed to request reset_gpio: %ld\n",
+ PTR_ERR(bd->reset_gpio));
+ return PTR_ERR(bd->reset_gpio);
+ }
+
+ bd->mute_gpio = devm_gpiod_get_optional(dev, "mute",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(bd->mute_gpio)) {
+ dev_err(dev, "Failed to request mute_gpio: %ld\n",
+ PTR_ERR(bd->mute_gpio));
+ return PTR_ERR(bd->mute_gpio);
+ }
+
+ platform_set_drvdata(pdev, bd);
+ bd->dev = dev;
+
+ return devm_snd_soc_register_component(dev, &soc_codec_bd,
+ &soc_dai_bd, 1);
+}
+
+static const struct of_device_id bd28623_of_match[] = {
+ { .compatible = "rohm,bd28623", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, bd28623_of_match);
+
+static struct platform_driver bd28623_codec_driver = {
+ .driver = {
+ .name = "bd28623",
+ .of_match_table = of_match_ptr(bd28623_of_match),
+ },
+ .probe = bd28623_probe,
+};
+module_platform_driver(bd28623_codec_driver);
+
+MODULE_AUTHOR("Katsuhiro Suzuki <[email protected]>");
+MODULE_DESCRIPTION("ROHM BD28623 speaker amplifier driver");
+MODULE_LICENSE("GPL v2");
--
2.16.1
The patch
ASoC: add DT bindings documentation for ROHM BD28623 codec
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From f5ca3ab9bc1b160966c1e5cc7bf831f7b8ec31e5 Mon Sep 17 00:00:00 2001
From: Katsuhiro Suzuki <[email protected]>
Date: Fri, 23 Feb 2018 10:17:16 +0900
Subject: [PATCH] ASoC: add DT bindings documentation for ROHM BD28623 codec
This patch adds DT bindings documentation for ROHM BD28623MUV
class D speaker amplifier.
Signed-off-by: Katsuhiro Suzuki <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
---
.../devicetree/bindings/sound/rohm,bd28623.txt | 29 ++++++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/rohm,bd28623.txt
diff --git a/Documentation/devicetree/bindings/sound/rohm,bd28623.txt b/Documentation/devicetree/bindings/sound/rohm,bd28623.txt
new file mode 100644
index 000000000000..d84557c2686e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rohm,bd28623.txt
@@ -0,0 +1,29 @@
+ROHM BD28623MUV Class D speaker amplifier for digital input
+
+This codec does not have any control buses such as I2C, it detect format and
+rate of I2S signal automatically. It has two signals that can be connected
+to GPIOs: reset and mute.
+
+Required properties:
+- compatible : should be "rohm,bd28623"
+- #sound-dai-cells: should be 0.
+- VCCA-supply : regulator phandle for the VCCA supply
+- VCCP1-supply : regulator phandle for the VCCP1 supply
+- VCCP2-supply : regulator phandle for the VCCP2 supply
+
+Optional properties:
+- reset-gpios : GPIO specifier for the active low reset line
+- mute-gpios : GPIO specifier for the active low mute line
+
+Example:
+
+ codec {
+ compatible = "rohm,bd28623";
+ #sound-dai-cells = <0>;
+
+ VCCA-supply = <&vcc_reg>;
+ VCCP1-supply = <&vcc_reg>;
+ VCCP2-supply = <&vcc_reg>;
+ reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ mute-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
--
2.16.1