Currently, even-channel number is set as tx direction and odd is set as rx.
However, though video-in uses ch6, the direction is not tx but rx.
This patch sets video-in's DMA direction correctly.
Signed-off-by: Tomoya MORINAGA <[email protected]>
---
V2: Update Koul-Vinod's comments
---
drivers/dma/pch_dma.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c
index 8d8fef1..c84b18d 100644
--- a/drivers/dma/pch_dma.c
+++ b/drivers/dma/pch_dma.c
@@ -478,7 +478,6 @@ static int pd_alloc_chan_resources(struct dma_chan *chan)
spin_unlock_bh(&pd_chan->lock);
pdc_enable_irq(chan, 1);
- pdc_set_dir(chan);
return pd_chan->descs_allocated;
}
@@ -561,6 +560,9 @@ static struct dma_async_tx_descriptor *pd_prep_slave_sg(struct dma_chan *chan,
else
return NULL;
+ pd_chan->dir = direction;
+ pdc_set_dir(chan);
+
for_each_sg(sgl, sg, sg_len, i) {
desc = pdc_desc_get(pd_chan);
@@ -850,8 +852,6 @@ static int __devinit pch_dma_probe(struct pci_dev *pdev,
pd_chan->membase = ®s->desc[i];
- pd_chan->dir = (i % 2) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
-
spin_lock_init(&pd_chan->lock);
INIT_LIST_HEAD(&pd_chan->active_list);
--
1.7.4
Fix checkpatch warnings.
Signed-off-by: Tomoya MORINAGA <[email protected]>
---
V3: Update Joe's comments (Change linefeed position)
---
drivers/dma/pch_dma.c | 9 ++++++---
1 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c
index c84b18d..0fa01e7 100644
--- a/drivers/dma/pch_dma.c
+++ b/drivers/dma/pch_dma.c
@@ -138,7 +138,8 @@ struct pch_dma {
#define dma_writel(pd, name, val) \
writel((val), (pd)->membase + PCH_DMA_##name)
-static inline struct pch_dma_desc *to_pd_desc(struct dma_async_tx_descriptor *txd)
+static inline
+struct pch_dma_desc *to_pd_desc(struct dma_async_tx_descriptor *txd)
{
return container_of(txd, struct pch_dma_desc, txd);
}
@@ -163,13 +164,15 @@ static inline struct device *chan2parent(struct dma_chan *chan)
return chan->dev->device.parent;
}
-static inline struct pch_dma_desc *pdc_first_active(struct pch_dma_chan *pd_chan)
+static inline
+struct pch_dma_desc *pdc_first_active(struct pch_dma_chan *pd_chan)
{
return list_first_entry(&pd_chan->active_list,
struct pch_dma_desc, desc_node);
}
-static inline struct pch_dma_desc *pdc_first_queued(struct pch_dma_chan *pd_chan)
+static inline
+struct pch_dma_desc *pdc_first_queued(struct pch_dma_chan *pd_chan)
{
return list_first_entry(&pd_chan->queue,
struct pch_dma_desc, desc_node);
--
1.7.4
Currently, Direct-Start mode(*) is enabled.
Our IOH's devices must not use this mode.
This causes unexpected behavior.
This patch deletes Direct-Start setting.
(*) This mode is used in order for CPU to generate the DMA request.
Signed-off-by: Tomoya MORINAGA <[email protected]>
---
drivers/dma/pch_dma.c | 7 -------
1 files changed, 0 insertions(+), 7 deletions(-)
diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c
index 0fa01e7..a755756 100644
--- a/drivers/dma/pch_dma.c
+++ b/drivers/dma/pch_dma.c
@@ -254,9 +254,6 @@ static bool pdc_is_idle(struct pch_dma_chan *pd_chan)
static void pdc_dostart(struct pch_dma_chan *pd_chan, struct pch_dma_desc* desc)
{
- struct pch_dma *pd = to_pd(pd_chan->chan.device);
- u32 val;
-
if (!pdc_is_idle(pd_chan)) {
dev_err(chan2dev(&pd_chan->chan),
"BUG: Attempt to start non-idle channel\n");
@@ -282,10 +279,6 @@ static void pdc_dostart(struct pch_dma_chan *pd_chan, struct pch_dma_desc* desc)
channel_writel(pd_chan, NEXT, desc->txd.phys);
pdc_set_mode(&pd_chan->chan, DMA_CTL0_SG);
}
-
- val = dma_readl(pd, CTL2);
- val |= 1 << (DMA_CTL2_START_SHIFT_BITS + pd_chan->chan.chan_id);
- dma_writel(pd, CTL2, val);
}
static void pdc_chain_complete(struct pch_dma_chan *pd_chan,
--
1.7.4
Support I2S device for ML7213 IOH
Signed-off-by: Tomoya MORINAGA <[email protected]>
---
drivers/dma/pch_dma.c | 62 +++++++++++++++++++++++++++++++++++++------------
1 files changed, 47 insertions(+), 15 deletions(-)
diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c
index a755756..c307316 100644
--- a/drivers/dma/pch_dma.c
+++ b/drivers/dma/pch_dma.c
@@ -77,10 +77,10 @@ struct pch_dma_regs {
u32 dma_ctl0;
u32 dma_ctl1;
u32 dma_ctl2;
- u32 reserved1;
+ u32 dma_ctl3;
u32 dma_sts0;
u32 dma_sts1;
- u32 reserved2;
+ u32 dma_sts2;
u32 reserved3;
struct pch_dma_desc_regs desc[MAX_CHAN_NR];
};
@@ -130,6 +130,7 @@ struct pch_dma {
#define PCH_DMA_CTL0 0x00
#define PCH_DMA_CTL1 0x04
#define PCH_DMA_CTL2 0x08
+#define PCH_DMA_CTL3 0x0C
#define PCH_DMA_STS0 0x10
#define PCH_DMA_STS1 0x14
@@ -202,16 +203,30 @@ static void pdc_set_dir(struct dma_chan *chan)
struct pch_dma *pd = to_pd(chan->device);
u32 val;
- val = dma_readl(pd, CTL0);
+ if (chan->chan_id < 8) {
+ val = dma_readl(pd, CTL0);
- if (pd_chan->dir == DMA_TO_DEVICE)
- val |= 0x1 << (DMA_CTL0_BITS_PER_CH * chan->chan_id +
- DMA_CTL0_DIR_SHIFT_BITS);
- else
- val &= ~(0x1 << (DMA_CTL0_BITS_PER_CH * chan->chan_id +
- DMA_CTL0_DIR_SHIFT_BITS));
+ if (pd_chan->dir == DMA_TO_DEVICE)
+ val |= 0x1 << (DMA_CTL0_BITS_PER_CH * chan->chan_id +
+ DMA_CTL0_DIR_SHIFT_BITS);
+ else
+ val &= ~(0x1 << (DMA_CTL0_BITS_PER_CH * chan->chan_id +
+ DMA_CTL0_DIR_SHIFT_BITS));
+
+ dma_writel(pd, CTL0, val);
+ } else {
+ int ch = chan->chan_id - 8; /* ch8-->0 ch9-->1 ... ch11->3 */
+ val = dma_readl(pd, CTL3);
- dma_writel(pd, CTL0, val);
+ if (pd_chan->dir == DMA_TO_DEVICE)
+ val |= 0x1 << (DMA_CTL0_BITS_PER_CH * ch +
+ DMA_CTL0_DIR_SHIFT_BITS);
+ else
+ val &= ~(0x1 << (DMA_CTL0_BITS_PER_CH * ch +
+ DMA_CTL0_DIR_SHIFT_BITS));
+
+ dma_writel(pd, CTL3, val);
+ }
dev_dbg(chan2dev(chan), "pdc_set_dir: chan %d -> %x\n",
chan->chan_id, val);
@@ -222,13 +237,26 @@ static void pdc_set_mode(struct dma_chan *chan, u32 mode)
struct pch_dma *pd = to_pd(chan->device);
u32 val;
- val = dma_readl(pd, CTL0);
+ if (chan->chan_id < 8) {
+ val = dma_readl(pd, CTL0);
- val &= ~(DMA_CTL0_MODE_MASK_BITS <<
- (DMA_CTL0_BITS_PER_CH * chan->chan_id));
- val |= mode << (DMA_CTL0_BITS_PER_CH * chan->chan_id);
+ val &= ~(DMA_CTL0_MODE_MASK_BITS <<
+ (DMA_CTL0_BITS_PER_CH * chan->chan_id));
+ val |= mode << (DMA_CTL0_BITS_PER_CH * chan->chan_id);
- dma_writel(pd, CTL0, val);
+ dma_writel(pd, CTL0, val);
+ } else {
+ int ch = chan->chan_id - 8; /* ch8-->0 ch9-->1 ... ch11->3 */
+
+ val = dma_readl(pd, CTL3);
+
+ val &= ~(DMA_CTL0_MODE_MASK_BITS <<
+ (DMA_CTL0_BITS_PER_CH * ch));
+ val |= mode << (DMA_CTL0_BITS_PER_CH * ch);
+
+ dma_writel(pd, CTL3, val);
+
+ }
dev_dbg(chan2dev(chan), "pdc_set_mode: chan %d -> %x\n",
chan->chan_id, val);
@@ -701,6 +729,7 @@ static void pch_dma_save_regs(struct pch_dma *pd)
pd->regs.dma_ctl0 = dma_readl(pd, CTL0);
pd->regs.dma_ctl1 = dma_readl(pd, CTL1);
pd->regs.dma_ctl2 = dma_readl(pd, CTL2);
+ pd->regs.dma_ctl3 = dma_readl(pd, CTL3);
list_for_each_entry_safe(chan, _c, &pd->dma.channels, device_node) {
pd_chan = to_pd_chan(chan);
@@ -723,6 +752,7 @@ static void pch_dma_restore_regs(struct pch_dma *pd)
dma_writel(pd, CTL0, pd->regs.dma_ctl0);
dma_writel(pd, CTL1, pd->regs.dma_ctl1);
dma_writel(pd, CTL2, pd->regs.dma_ctl2);
+ dma_writel(pd, CTL3, pd->regs.dma_ctl3);
list_for_each_entry_safe(chan, _c, &pd->dma.channels, device_node) {
pd_chan = to_pd_chan(chan);
@@ -925,6 +955,7 @@ static void __devexit pch_dma_remove(struct pci_dev *pdev)
#define PCI_DEVICE_ID_ML7213_DMA1_8CH 0x8026
#define PCI_DEVICE_ID_ML7213_DMA2_8CH 0x802B
#define PCI_DEVICE_ID_ML7213_DMA3_4CH 0x8034
+#define PCI_DEVICE_ID_ML7213_DMA4_12CH 0x8032
static const struct pci_device_id pch_dma_id_table[] = {
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_EG20T_PCH_DMA_8CH), 8 },
@@ -932,6 +963,7 @@ static const struct pci_device_id pch_dma_id_table[] = {
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA1_8CH), 8}, /* UART Video */
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA2_8CH), 8}, /* PCMIF SPI */
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA3_4CH), 4}, /* FPGA */
+ { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA4_12CH), 12}, /* I2S */
{ 0, },
};
--
1.7.4
Support new device OKI SEMICONDUCTOR ML7223 IOH(Input/Output Hub).
The ML7223 IOH is for MP(Media Phone) use.
The ML7223 is companion chip for Intel Atom E6xx series.
The ML7223 is completely compatible for Intel EG20T PCH.
Signed-off-by: Tomoya MORINAGA <[email protected]>
---
V3: Update Joe's comments (Add "DMA support" description)
---
drivers/dma/Kconfig | 12 +++++++-----
drivers/dma/pch_dma.c | 8 ++++++++
2 files changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index a572600..25cf327 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -200,16 +200,18 @@ config PL330_DMA
platform_data for a dma-pl330 device.
config PCH_DMA
- tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7213 IOH DMA support"
+ tristate "Intel EG20T PCH / OKI Semi IOH(ML7213/ML7223) DMA support"
depends on PCI && X86
select DMA_ENGINE
help
Enable support for Intel EG20T PCH DMA engine.
- This driver also can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/
- Output Hub) which is for IVI(In-Vehicle Infotainment) use.
- ML7213 is companion chip for Intel Atom E6xx series.
- ML7213 is completely compatible for Intel EG20T PCH.
+ This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
+ Output Hub), ML7213 and ML7223.
+ ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is
+ for MP(Media Phone) use.
+ ML7213/ML7223 is companion chip for Intel Atom E6xx series.
+ ML7213/ML7223 is completely compatible for Intel EG20T PCH.
config IMX_SDMA
tristate "i.MX SDMA support"
diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c
index c307316..9c98739 100644
--- a/drivers/dma/pch_dma.c
+++ b/drivers/dma/pch_dma.c
@@ -956,6 +956,10 @@ static void __devexit pch_dma_remove(struct pci_dev *pdev)
#define PCI_DEVICE_ID_ML7213_DMA2_8CH 0x802B
#define PCI_DEVICE_ID_ML7213_DMA3_4CH 0x8034
#define PCI_DEVICE_ID_ML7213_DMA4_12CH 0x8032
+#define PCI_DEVICE_ID_ML7223_DMA1_4CH 0x800B
+#define PCI_DEVICE_ID_ML7223_DMA2_4CH 0x800E
+#define PCI_DEVICE_ID_ML7223_DMA3_4CH 0x8017
+#define PCI_DEVICE_ID_ML7223_DMA4_4CH 0x803B
static const struct pci_device_id pch_dma_id_table[] = {
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_EG20T_PCH_DMA_8CH), 8 },
@@ -964,6 +968,10 @@ static const struct pci_device_id pch_dma_id_table[] = {
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA2_8CH), 8}, /* PCMIF SPI */
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA3_4CH), 4}, /* FPGA */
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA4_12CH), 12}, /* I2S */
+ { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_DMA1_4CH), 4}, /* UART */
+ { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_DMA2_4CH), 4}, /* Video SPI */
+ { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_DMA3_4CH), 4}, /* Security */
+ { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_DMA4_4CH), 4}, /* FPGA */
{ 0, },
};
--
1.7.4
Signed-off-by: Tomoya MORINAGA <[email protected]>
---
drivers/dma/pch_dma.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c
index 9c98739..b321eaf 100644
--- a/drivers/dma/pch_dma.c
+++ b/drivers/dma/pch_dma.c
@@ -961,7 +961,7 @@ static void __devexit pch_dma_remove(struct pci_dev *pdev)
#define PCI_DEVICE_ID_ML7223_DMA3_4CH 0x8017
#define PCI_DEVICE_ID_ML7223_DMA4_4CH 0x803B
-static const struct pci_device_id pch_dma_id_table[] = {
+DEFINE_PCI_DEVICE_TABLE(pch_dma_id_table) = {
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_EG20T_PCH_DMA_8CH), 8 },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_EG20T_PCH_DMA_4CH), 4 },
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA1_8CH), 8}, /* UART Video */
--
1.7.4
On Mon, 2011-05-09 at 16:09 +0900, Tomoya MORINAGA wrote:
> Currently, even-channel number is set as tx direction and odd is set as rx.
> However, though video-in uses ch6, the direction is not tx but rx.
> This patch sets video-in's DMA direction correctly.
>
> Signed-off-by: Tomoya MORINAGA <[email protected]>
> ---
> V2: Update Koul-Vinod's comments
If you're sending a patch series please ensure you send with the cover
letter - git send-email can do this for you.
Applied this time
--
~Vinod
Hi Vinod
On Monday, May 09, 2011 8:43 PM, Koul, Vinod wrote:
> If you're sending a patch series please ensure you send with
> the cover letter - git send-email can do this for you.
I couldn't understand your saying.
What does "cover letter" mean ?
I always use "git send-email".
Let me know in more detail.
>
> Applied this time
Thank you for your applied.
With Best Regards,
-----------------------------------------
Tomoya MORINAGA
OKI SEMICONDUCTOR CO., LTD.