2006-11-13 23:22:15

by Greg.Chandler

[permalink] [raw]
Subject: [PATCH 1/1] drivers/block/Kconfig text update. Try #2


Sorry...
I've attached the new one.

>
> The second line of the drivers/block/cciss.c file says:
>
> " * Disk Array driver for HP SA 5xxx and 6xxx Controllers"
>
> I couldn't find the 6 series anywhere in the menu, and I ended up
> finding it in the code...

Please read/observe Documentation/SubmittingPatches:
the --- & +++ lines should begin with linux/drivers/... or a/drivers/...
so that the patch can be applied with "patch -p1".

> --- drivers/block/Kconfig.old 2006-11-13 14:20:12.000000000 -0800
> +++ drivers/block/Kconfig 2006-11-13 14:20:32.000000000 -0800
> @@ -155,10 +155,10 @@
> this driver.
>
> config BLK_CPQ_CISS_DA
> - tristate "Compaq Smart Array 5xxx support"
> + tristate "Compaq Smart Array 5xxx/6xxx support"
> depends on PCI
> help
> - This is the driver for Compaq Smart Array 5xxx controllers.
> + This is the driver for Compaq Smart Array 5xxx/6xxx
> controllers.

Patch is line-wrapped on the line above.

> Everyone using these boards should say Y here.
> See <file:Documentation/cciss.txt> for the current list of
> boards supported by this driver, and for further information

---
~Randy


Attachments:
block_cciss_menu_update.diff (756.00 B)
block_cciss_menu_update.diff

2006-11-13 23:34:05

by Randy Dunlap

[permalink] [raw]
Subject: Re: [PATCH 1/1] drivers/block/Kconfig text update. Try #2

[email protected] wrote:
>
> Sorry...
> I've attached the new one.

OK, thanks.

>> The second line of the drivers/block/cciss.c file says:
>>
>> " * Disk Array driver for HP SA 5xxx and 6xxx Controllers"
>>
>> I couldn't find the 6 series anywhere in the menu, and I ended up
>> finding it in the code...
>
> Please read/observe Documentation/SubmittingPatches:
> the --- & +++ lines should begin with linux/drivers/... or a/drivers/...
> so that the patch can be applied with "patch -p1".
>
>> --- drivers/block/Kconfig.old 2006-11-13 14:20:12.000000000 -0800
>> +++ drivers/block/Kconfig 2006-11-13 14:20:32.000000000 -0800
>> @@ -155,10 +155,10 @@
>> this driver.
>>
>> config BLK_CPQ_CISS_DA
>> - tristate "Compaq Smart Array 5xxx support"
>> + tristate "Compaq Smart Array 5xxx/6xxx support"
>> depends on PCI
>> help
>> - This is the driver for Compaq Smart Array 5xxx controllers.
>> + This is the driver for Compaq Smart Array 5xxx/6xxx
>> controllers.
>
> Patch is line-wrapped on the line above.
>
>> Everyone using these boards should say Y here.
>> See <file:Documentation/cciss.txt> for the current list of
>> boards supported by this driver, and for further information
>
> ---

--
~Randy

2006-11-13 23:47:36

by Jiri Slaby

[permalink] [raw]
Subject: Re: [PATCH 1/1] drivers/block/Kconfig text update. Try #2

[email protected] wrote:
>
> Sorry...
> I've attached the new one.

Content-Type: application/octet-stream

Not so good idea.

regards,
--
http://www.fi.muni.cz/~xslaby/ Jiri Slaby
faculty of informatics, masaryk university, brno, cz
e-mail: jirislaby gmail com, gpg pubkey fingerprint:
B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E