From: "Dr. Git" <[email protected]>
[Yassine: Change label from modem to mss_pil, change smp2p and reserved mem handles, and
change smd-edge label to mpss.]
Original patch:
https://gitlab.com/msm8996-mainline/linux-msm8996/-/commit/ac73ebff6b74a75d1f3237342c2af8e0dc642353
Signed-off-by: Yassine Oudjana <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 57 +++++++++++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 559612a3ddeb..bb6bfd24256f 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1285,6 +1285,63 @@ lpass_q6_smmu: iommu@1600000 {
clock-names = "iface", "bus";
};
+ mss_pil: remoteproc@2080000 {
+ compatible = "qcom,msm8996-mss-pil";
+
+ reg = <0x02080000 0x100>,
+ <0x02180000 0x040>;
+ reg-names = "qdsp6", "rmb";
+
+ interrupts-extended = <&intc 0 448 IRQ_TYPE_EDGE_RISING>,
+ <&mpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&mpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&mpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&mpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&xo_board>,
+ <&gcc GCC_MSS_CFG_AHB_CLK>,
+ <&rpmcc RPM_SMD_PCNOC_CLK>,
+ <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+ <&gcc GCC_BOOT_ROM_AHB_CLK>,
+ <&gcc GCC_MSS_GPLL0_DIV_CLK>,
+ <&gcc GCC_MSS_SNOC_AXI_CLK>,
+ <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
+ <&rpmcc RPM_SMD_QDSS_CLK>;
+
+ clock-names = "xo", "iface", "pnoc", "bus",
+ "mem", "gpll0_mss", "snoc_axi",
+ "mnoc_axi", "qdss";
+
+ resets = <&gcc GCC_MSS_RESTART>;
+ reset-names = "mss_restart";
+
+ qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
+
+ qcom,smem-states = <&mpss_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ mba {
+ memory-region = <&mba_mem>;
+ };
+
+ mpss {
+ memory-region = <&mpss_mem>;
+ };
+
+ smd-edge {
+ interrupts = <0 449 IRQ_TYPE_EDGE_RISING>;
+
+ label = "mpss";
+ mboxes = <&apcs_glb 12>;
+ qcom,smd-edge = <0>;
+ qcom,remote-pid = <1>;
+ };
+ };
+
stm@3002000 {
compatible = "arm,coresight-stm", "arm,primecell";
reg = <0x3002000 0x1000>,
--
2.32.0