[1.] One line summary of the problem:
MTRR support doesn't work properly with Rage128 pro based card.
[2.] Full description of the problem/report:
Graphic acceleration features do not work under X since I
installed kernel
release 2.5.0.
The problem arises mainly with games which use 3D rendering
features
(such as Tux Racer, Gl Tron ecc.)
I tried to patch with 2.5.1, 2.5.2, 2.5.3-pre6 : I saw no
improvement.
[3.] Keywords (i.e., modules, networking, kernel):
mtrr , r128, dri, kernel, graphic acceleration
[4.] Kernel version (from /proc/version):
2.5.3-pre6 (since 2.5.0)
2.4.3 behaves correctly
[5.] Output of Oops.. message (if applicable) [snip]
(From /var/log/kernel/warnings)
mtrr: no MTRR for dc000000,2000000 found
[6.] A small shell script or example program which triggers the
problem (if possible)
Not available
[7.] Environment
Kde 2.1.1
XFree86 ver. 4.0.3
[7.1.] Software (add the output of the ver_linux script here)
Linux QUENTIN 2.5.3-pre6 #8 mer gen 30 20:13:17 EST 2002 i686
unknown
Gnu C 2.96
Gnu make 3.79.1
binutils 2.10.1.0.2
util-linux 2.10s
mount 2.11b
modutils 2.4.3
e2fsprogs 1.19
PPP 2.4.0
Linux C Library 2.2.2
Dynamic linker (ldd) 2.2.2
Procps 2.0.7
Net-tools 1.59
Console-tools 0.2.3
Sh-utils 2.0
Modules Loaded via82cxxx_audio ac97_codec 8139too crc32
ov511
usb-uhci usbcore nls_iso8859-1 nls_cp850
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 3
cpu MHz : 598.483
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge
mca cmov
pat pse36 mmx fxsr sse
bogomips : 1192.75
[7.3.] Module information (from /proc/modules):
via82cxxx_audio 17792 2
ac97_codec 9456 0 [via82cxxx_audio]
8139too 12464 1 (autoclean)
crc32 896 1 (autoclean) [8139too]
ov511 72176 0
usb-uhci 21360 0 (unused)
usbcore 55568 1 [ov511 usb-uhci]
nls_iso8859-1 2880 1 (autoclean)
nls_cp850 3616 1 (autoclean)
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
(from /proc/iomem)
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-07febfff : System RAM
00100000-002395c9 : Kernel code
002395ca-00291fef : Kernel data
07fec000-07feefff : ACPI Tables
07fef000-07ffefff : reserved
07fff000-07ffffff : ACPI Non-volatile Storage
da000000-da0000ff : Realtek Semiconductor Co., Ltd. RTL-8139
da000000-da0000ff : 8139too
da800000-daffffff : PCI Bus #01
da800000-da803fff : ATI Technologies Inc Rage 128 PF
db000000-db0000ff : Motorola SM56 PCI Modem
dbf00000-dfffffff : PCI Bus #01
dc000000-dfffffff : ATI Technologies Inc Rage 128 PF
e0000000-e7ffffff : VIA Technologies, Inc. VT82C693A/694x [Apollo
PRO133x]
ffff0000-ffffffff : reserved
(from /proc/ioports)
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
9800-98ff : Realtek Semiconductor Co., Ltd. RTL-8139
9800-98ff : 8139too
a000-a003 : VIA Technologies, Inc. AC97 Audio Controller
a000-a003 : via82cxxx_audio
a400-a403 : VIA Technologies, Inc. AC97 Audio Controller
a400-a403 : via82cxxx_audio
a800-a8ff : VIA Technologies, Inc. AC97 Audio Controller
a800-a8ff : via82cxxx_audio
b000-b01f : VIA Technologies, Inc. UHCI USB (#2)
b000-b01f : usb-uhci
b400-b41f : VIA Technologies, Inc. UHCI USB
b400-b41f : usb-uhci
b800-b80f : VIA Technologies, Inc. Bus Master IDE
b800-b807 : ide0
b808-b80f : ide1
d000-dfff : PCI Bus #01
d800-d8ff : ATI Technologies Inc Rage 128 PF
e400-e4ff : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
e800-e80f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: VIA Technologies, Inc. VT82C691 [Apollo PRO] (rev c2)
Subsystem: Asustek Computer, Inc.: Unknown device 8020
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2
Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=x2
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3 AGP]
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: da800000-daffffff
Prefetchable memory behind bridge: dbf00000-dfffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super] (rev 22)
Subsystem: Asustek Computer, Inc.: Unknown device 8020
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:04.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 10)
(prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at b800 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10)
(prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at b400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.3 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10)
(prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at b000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
(rev
30)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 [Apollo
Super AC97/Audio] (rev 20)
Subsystem: Asustek Computer, Inc.: Unknown device 1013
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 9
Region 0: I/O ports at a800 [size=256]
Region 1: I/O ports at a400 [size=4]
Region 2: I/O ports at a000 [size=4]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Communication controller: Motorola SM56 PCI Modem
Subsystem: CIS Technology Inc SM56 PCI Speakerphone Modem
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (250ns min, 63750ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at db000000 (32-bit, prefetchable) [size=256]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0+,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME+
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev
10)
Subsystem: Unex Technology Corp. ND010
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 9800 [size=256]
Region 1: Memory at da000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF (prog-if
00
[VGA])
Subsystem: ATI Technologies Inc: Unknown device 0018
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at dc000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at d800 [size=256]
Region 2: Memory at da800000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at dbfe0000 [disabled] [size=128K]
Capabilities: [50] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x2
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[7.6.] SCSI information (from /proc/scsi/scsi)
Not available (no scsi devices mounted)
[7.7.] Other information that might be relevant to the problem
(from /proc/mtrr)
reg00: base=0x00000000 ( 0MB), size= 128MB: write-back,
count=1
reg01: base=0xe0000000 (3584MB), size= 128MB:
write-combining, count=2
reg02: base=0xdc000000 (3520MB), size= 64MB:
write-combining, count=4
slot offset size type flags address
mtrr
(from /proc/dri/0/vm)
0 0xda800000 0x00080000 REG 0x02 0xca883000 none
1 0xe0302000 0x004e0000 AGP 0x00 0x00000000 1
2 0xe0102000 0x00200000 AGP 0x00 0xcaa08000 1
3 0xe0101000 0x00001000 AGP 0x02 0xcaa06000 1
4 0xe0000000 0x00101000 AGP 0x02 0xca904000 1
5 0xdc000000 0x02000000 FB 0x00 0xc887f000 2
6 0xc887d000 0x00001000 SHM 0x20 0xc887d000 none
[X.] Other notes, patches, fixes, workarounds:
Nothing in particular.
Thanks in advance for help,
Vincenzo Cuciti
_________________________________________________________________
MSN Photos ? il metodo pi? semplice per condividere e stampare le tue foto:
http://photos.msn.it/Support/WorldWide.aspx
> Kde 2.1.1
> XFree86 ver. 4.0.3
XFree 4.1 is required for the 2.5 kernel DRM packages
Could you send an output of cat /proc/mtrr when you're in X. Incidentally,
do you have framebuffer support compiled in?
Regards,
Zwane Mwaikambo