Hello All,
This patch adds support for 1078 type controller (device id : 0x62).
Patch is made against the latest git snapshot of scsi-misc-2.6 tree.
Please review it and all comments are appreciated.
Thanks,
Sumant Patro
Signed-off-by: Sumant Patro <[email protected]>
diff -uprN linux2.6.orig/Documentation/scsi/ChangeLog.megaraid_sas
linux2.6/Documentation/scsi/ChangeLog.megaraid_sas
--- linux2.6.orig/Documentation/scsi/ChangeLog.megaraid_sas 2006-01-23
15:08:40.000000000 -0800
+++ linux2.6/Documentation/scsi/ChangeLog.megaraid_sas 2006-01-23
15:53:46.000000000 -0800
@@ -1,3 +1,11 @@
+1 Release Date : Mon Jan 23 15:16:30 PST 2006 - Sumant Patro
<[email protected]>
+2 Current Version : 00.00.02.02
+3 Older Version : 00.00.02.01
+
+i. Support for 1078 type (ppc IOP) controller, device id : 0x62 added.
During initialisation, depending on the device id, the template members
are intialised with function pointers specfic to the ppc or xscale
controllers.
+
+ -Sumant Patro <[email protected]>
+
1 Release Date : Mon Jan 23 14:09:01 PST 2006 - Sumant Patro
<[email protected]>
2 Current Version : 00.00.02.02
3 Older Version : 00.00.02.01
diff -uprN linux2.6.orig/drivers/scsi/megaraid/megaraid_sas.c
linux2.6/drivers/scsi/megaraid/megaraid_sas.c
--- linux2.6.orig/drivers/scsi/megaraid/megaraid_sas.c 2006-01-23
15:41:00.000000000 -0800
+++ linux2.6/drivers/scsi/megaraid/megaraid_sas.c 2006-01-23
15:41:49.000000000 -0800
@@ -60,6 +60,12 @@ static struct pci_device_id megasas_pci_
PCI_ANY_ID,
},
{
+ PCI_VENDOR_ID_LSI_LOGIC,
+ PCI_DEVICE_ID_LSI_SAS1078R, // ppc IOP
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ },
+ {
PCI_VENDOR_ID_DELL,
PCI_DEVICE_ID_DELL_PERC5, // xscale IOP
PCI_ANY_ID,
@@ -199,6 +205,86 @@ static struct megasas_instance_template
*/
/**
+* The following functions are defined for ppc (deviceid : 0x62)
+* controllers
+*/
+
+/**
+ * megasas_enable_intr_ppc - Enables interrupts
+ * @regs: MFI register set
+ */
+static inline void
+megasas_enable_intr_ppc(struct megasas_register_set __iomem * regs)
+{
+ writel(0xFFFFFFFF, &(regs)->outbound_doorbell_clear);
+
+ writel(~0x80000004, &(regs)->outbound_intr_mask);
+
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_intr_mask);
+}
+
+/**
+ * megasas_read_fw_status_reg_ppc - returns the current FW status value
+ * @regs: MFI register set
+ */
+static u32
+megasas_read_fw_status_reg_ppc(struct megasas_register_set __iomem *
regs)
+{
+ return readl(&(regs)->outbound_scratch_pad);
+}
+
+/**
+ * megasas_clear_interrupt_ppc - Check & clear interrupt
+ * @regs: MFI register set
+ */
+static int
+megasas_clear_intr_ppc(struct megasas_register_set __iomem * regs)
+{
+ u32 status;
+ /*
+ * Check if it is our interrupt
+ */
+ status = readl(®s->outbound_intr_status);
+
+ if (!(status & MFI_REPLY_1078_MESSAGE_INTERRUPT)) {
+ return 1;
+ }
+
+ /*
+ * Clear the interrupt by writing back the same value
+ */
+ writel(status, ®s->outbound_doorbell_clear);
+
+ return 0;
+}
+/**
+ * megasas_fire_cmd_ppc - Sends command to the FW
+ * @frame_phys_addr : Physical address of cmd
+ * @frame_count : Number of frames for the command
+ * @regs : MFI register set
+ */
+static inline void
+megasas_fire_cmd_ppc(dma_addr_t frame_phys_addr, u32 frame_count,
struct megasas_register_set __iomem *regs)
+{
+ writel((frame_phys_addr | (frame_count<<1))|1,
+ &(regs)->inbound_queue_port);
+}
+
+static struct megasas_instance_template megasas_instance_template_ppc =
{
+
+ .fire_cmd = megasas_fire_cmd_ppc,
+ .enable_intr = megasas_enable_intr_ppc,
+ .clear_intr = megasas_clear_intr_ppc,
+ .read_fw_status_reg = megasas_read_fw_status_reg_ppc,
+};
+
+/**
+* This is the end of set of functions & definitions
+* specific to ppc (deviceid : 0x62) controllers
+*/
+
+/**
* megasas_disable_intr - Disables interrupts
* @regs: MFI register set
*/
@@ -1607,7 +1693,17 @@ static int megasas_init_mfi(struct megas
reg_set = instance->reg_set;
- instance->instancet = &megasas_instance_template_xscale;
+ switch(instance->pdev->device)
+ {
+ case PCI_DEVICE_ID_LSI_SAS1078R:
+ instance->instancet = &megasas_instance_template_ppc;
+ break;
+ case PCI_DEVICE_ID_LSI_SAS1064R:
+ case PCI_DEVICE_ID_DELL_PERC5:
+ default:
+ instance->instancet = &megasas_instance_template_xscale;
+ break;
+ }
/*
* We expect the FW state to be READY
diff -uprN linux2.6.orig/drivers/scsi/megaraid/megaraid_sas.h
linux2.6/drivers/scsi/megaraid/megaraid_sas.h
--- linux2.6.orig/drivers/scsi/megaraid/megaraid_sas.h 2006-01-23
15:40:11.000000000 -0800
+++ linux2.6/drivers/scsi/megaraid/megaraid_sas.h 2006-01-23
15:42:12.000000000 -0800
@@ -20,7 +20,7 @@
*/
#define MEGASAS_VERSION "00.00.02.02"
#define MEGASAS_RELDATE "Jan 23, 2006"
-#define MEGASAS_EXT_VERSION "Mon Jan 23 14:09:01 PST 2006"
+#define MEGASAS_EXT_VERSION "Mon Jan 23 15:16:30 PST 2006"
/*
* =====================================
* MegaRAID SAS MFI firmware definitions
@@ -553,31 +553,46 @@ struct megasas_ctrl_info {
#define MFI_OB_INTR_STATUS_MASK 0x00000002
#define MFI_POLL_TIMEOUT_SECS 10
+#define MFI_REPLY_1078_MESSAGE_INTERRUPT 0x80000000
+#define PCI_DEVICE_ID_LSI_SAS1078R 0x00000062
+
struct megasas_register_set {
+ u32 reserved_0[4]; /*0000h*/
- u32 reserved_0[4]; /*0000h */
+ u32 inbound_msg_0; /*0010h*/
+ u32 inbound_msg_1; /*0014h*/
+ u32 outbound_msg_0; /*0018h*/
+ u32 outbound_msg_1; /*001Ch*/
- u32 inbound_msg_0; /*0010h */
- u32 inbound_msg_1; /*0014h */
- u32 outbound_msg_0; /*0018h */
- u32 outbound_msg_1; /*001Ch */
+ u32 inbound_doorbell; /*0020h*/
+ u32 inbound_intr_status; /*0024h*/
+ u32 inbound_intr_mask; /*0028h*/
- u32 inbound_doorbell; /*0020h */
- u32 inbound_intr_status; /*0024h */
- u32 inbound_intr_mask; /*0028h */
+ u32 outbound_doorbell; /*002Ch*/
+ u32 outbound_intr_status; /*0030h*/
+ u32 outbound_intr_mask; /*0034h*/
- u32 outbound_doorbell; /*002Ch */
- u32 outbound_intr_status; /*0030h */
- u32 outbound_intr_mask; /*0034h */
+ u32 reserved_1[2]; /*0038h*/
- u32 reserved_1[2]; /*0038h */
+ u32 inbound_queue_port; /*0040h*/
+ u32 outbound_queue_port; /*0044h*/
- u32 inbound_queue_port; /*0040h */
- u32 outbound_queue_port; /*0044h */
+ u32 reserved_2[22]; /*0048h*/
- u32 reserved_2; /*004Ch */
+ u32 outbound_doorbell_clear; /*00A0h*/
- u32 index_registers[1004]; /*0050h */
+ u32 reserved_3[3]; /*00A4h*/
+
+ u32 outbound_scratch_pad ; /*00B0h*/
+
+ u32 reserved_4[3]; /*00B4h*/
+
+ u32 inbound_low_queue_port ; /*00C0h*/
+
+ u32 inbound_high_queue_port ; /*00C4h*/
+
+ u32 reserved_5; /*00C8h*/
+ u32 index_registers[820]; /*00CCh*/
} __attribute__ ((packed));
On Wednesday, January 25, 2006 1:06 PM, Sumant Patro wrote:
>
> Hello All,
>
> This patch adds support for 1078 type controller
> (device id : 0x62).
> Patch is made against the latest git snapshot of scsi-misc-2.6 tree.
>
> Please review it and all comments are appreciated.
>
> Thanks,
>
James - NACK this patch.
I noticed you have picked up this patch in your scsi-rc-fixes stream.
http://www.kernel.org/pub/linux/kernel/people/jejb/scsi-rc-fixes-2.6.cha
ngelog
There is a mistake with this patch. This SAS1078 device id (0x62) is
the same
id we are claiming for our fusion drivers. Our device ID is 0x62. You
can see
that at this link: http://pci-ids.ucw.cz/iii/?i=10000062. I haven't got
around
to it, but I plan to post support for that soon.
A different version of SAS1078 is being manufactured by the megaraid
group.
Neela Syam Kolli is aware of this issue, and I believe they are working
out the details,
and will be posting a patch to solve this.
Can this patch be backed out if its not fixed before 2.6.16 kernel is
released.
Eric Moore
We will be sending a new patch that takes care of this problem.
Thanks,
Neela Syam Kolli.
-----Original Message-----
From: Moore, Eric
Sent: Monday, January 30, 2006 4:29 PM
To: Patro, Sumant; [email protected]; [email protected];
[email protected]; [email protected]
Cc: Bagalkote, Sreenivas; Kolli, Neela; Yang, Bo; Doelfel, Hardy
Subject: RE: [PATCH 3/3] megaraid_sas: support for 1078 type controller
added
On Wednesday, January 25, 2006 1:06 PM, Sumant Patro wrote:
>
> Hello All,
>
> This patch adds support for 1078 type controller
> (device id : 0x62).
> Patch is made against the latest git snapshot of scsi-misc-2.6 tree.
>
> Please review it and all comments are appreciated.
>
> Thanks,
>
James - NACK this patch.
I noticed you have picked up this patch in your scsi-rc-fixes stream.
http://www.kernel.org/pub/linux/kernel/people/jejb/scsi-rc-fixes-2.6.cha
ngelog
There is a mistake with this patch. This SAS1078 device id (0x62) is
the same
id we are claiming for our fusion drivers. Our device ID is 0x62. You
can see
that at this link: http://pci-ids.ucw.cz/iii/?i=10000062. I haven't got
around
to it, but I plan to post support for that soon.
A different version of SAS1078 is being manufactured by the megaraid
group.
Neela Syam Kolli is aware of this issue, and I believe they are working
out the details,
and will be posting a patch to solve this.
Can this patch be backed out if its not fixed before 2.6.16 kernel is
released.
Eric Moore