Phase 2 of the smpenum rewrite is available at:
ftp://ftp.kernel.org/pub/linux/kernel/people/grover/ .
smp-20030224-2.5.63.diff.gz - the patch
smp-20030224-2.5.63-broken-out.tar.gz - individual cset diffs
The goal of smpenum is to replace the current SMP enumeration code's
heavy use of MPS-specific data structures with smaller, generic
structures. Then, MPS and ACPI can be modularized into
"SMP-enumerators", which report found resources (CPUs, IOAPICs, etc.)
through clean interfaces.
This phase consolidates MPS and ACPI I/O APIC enumeration through a
common interface, like the previous phase consolidated CPU enumeration.
IOAPIC ID assignation for each now uses the same code path, and is more
conformant to the MPS specification. In addition, we can now cleanly
fall back to MPS, if the ACPI APIC table is bad.
It also fixes the previous patch's build issues with various x86 subarch
and other config options.
If you have an SMP box, especially one with multiple IOAPICs, test
reports would be appreciated. This patch should have no visible effects,
yet -- things should just keep working like they always have.
diffstat and changelogs below.
Regards -- Andy
arch/i386/Kconfig | 14
arch/i386/kernel/Makefile | 16
arch/i386/kernel/acpi.c | 55 +
arch/i386/kernel/acpi/boot.c | 12
arch/i386/kernel/apic.c | 29
arch/i386/kernel/io_apic.c | 259 +++-----
arch/i386/kernel/mpparse.c | 462 +++++----------
arch/i386/kernel/setup.c | 42 -
arch/i386/kernel/smpboot.c | 8
arch/i386/kernel/smpenum.c | 209 +++++-
arch/i386/kernel/time.c | 1
arch/i386/kernel/timers/timer_pit.c | 2
arch/i386/mach-visws/mpparse.c | 95 ---
arch/i386/mm/discontig.c | 2
drivers/acpi/Kconfig | 1
drivers/acpi/bus.c | 1
drivers/acpi/pci_irq.c | 3
include/asm-i386/acpi.h | 9
include/asm-i386/io_apic.h | 10
include/asm-i386/mach-bigsmp/mach_apic.h | 13
include/asm-i386/mach-default/mach_apic.h | 15
include/asm-i386/mach-default/mach_mpparse.h | 8
include/asm-i386/mach-numaq/mach_apic.h | 13
include/asm-i386/mach-numaq/mach_mpparse.h | 12
include/asm-i386/mach-summit/mach_apic.h | 14
include/asm-i386/mach-summit/mach_mpparse.h | 8
include/asm-i386/mach-visws/mach_apic.h | 8
include/asm-i386/mpspec.h | 43 -
include/asm-i386/smp.h | 3
include/asm-i386/smpenum.h | 329 +++++++---
30 files changed, 855 insertions(+), 841 deletions(-)
ChangeSets:
<[email protected]> (03/02/24 1.990.9.6)
[smpenum] fix a lot of compilation issues when compiling for the
various
x86 subarches
<[email protected]> (03/02/21 1.990.9.5)
[snmpenum] Hmm, maybe we want a CONFIG_X86_MPPARSE after all
<[email protected]> (03/02/20 1.990.9.4)
[smpenum] fix for UP compile
<[email protected]> (03/02/19 1.990.9.3)
Cset exclude: [email protected]|ChangeSet|20030125011210|06056
<[email protected]> (03/02/19 1.990.9.2)
<[email protected]> (03/01/25 1.914.65.12)
[smpenum] Add some dprintks so we know when bad stuff happens
<[email protected]> (03/01/24 1.914.65.11)
[smpenum] change mpc_apic_id to take individual params instead of a
struct ptr
<[email protected]> (03/01/24 1.914.65.10)
[smpenum] This cset starts the modularization of SMP enumerators. MPS
and ACPI
now use a registration function with smpenum (only 1 function ptr
passed so
far) but the groundwork is there for better isolation of variables
and
data structures.
This also implements MPS fallback. If ACPI cannot parse any of the
tables,
it resets any variables it might have set, and lets MPS be used.
Finally, since smp_processor_register only takes 2 params, we just
pass them,
instead of passing a struct with them as members.
<[email protected]> (03/01/24 1.914.65.9)
[smpenum] Previously, I changed all instances of smp_found_config to
mps_found_config. Now, I have re-added smp_found_config. It means
(acpi_found_config || mps_found_config).
<[email protected]> (03/01/24 1.914.65.8)
[smpenum] No reason for CONFIG_X86_MPPARSE option - remove it
<[email protected]> (03/01/23 1.914.65.7)
[smpenum] Get things compiling again for all variations of UP with or
without
LAPIC and IOAPIC
<[email protected]> (03/01/23 1.914.65.6)
[smpenum] Unify IOAPIC code through added smp_ioapic_register
function
This patch renames setup_io_apic_ids_from_mpc to setup_io_apic_ids.
It makes
ACPI use this function, and also changes the apicid discovery
algorithm to
precisely match what the MPS spec says (most notably, if the apicid
already
has a value programmed, use that over what the BIOS says)
We save space and make the code simpler by only having the fields we
need in
the kernel data structures, instead of using the entire MPS-defined
one.
<[email protected]> (03/01/22 1.914.65.5)
[smpenum] Rename APIC_BROADCAST_ID to APIC_MAX_ID, since that's what
it
really is.
<[email protected]> (03/01/21 1.914.65.4)
[smpenum] Make MP bus enumeration use a non-MPS interface called
smp_bus_register.
<[email protected]> (03/01/21 1.914.65.3)
[smpenum] Add smpenum.c
struct/variable/function renames (mainly mpc_record -> mps_record)
Remove MP_processor_info, and change code to call
smp_processor_register
instead.
Move non-MPS variables to smpenum.c
No real reason to call find_smp_config from setup_memory - move it
to setup_arch, which is where the ACPI equivalent function is called
from.
<[email protected]> (03/01/21 1.914.65.2)
[smpenum] struct mpc_config_processor no longer includes
mpc_cpufeature
member, so remove printks that reference that.
<[email protected]> (03/01/21 1.914.65.1)
[smpenum] rename structs and variables
Regards -- Andy