> From: Shawn Starr [mailto:[email protected]]
> I see that you see APIC level
>
> CPU0
> 0: 12194031 XT-PIC timer
> 1: 15 XT-PIC i8042
> 2: 0 XT-PIC cascade
> 3: 149 XT-PIC serial
> 5: 0 XT-PIC soundblaster
> 8: 1 XT-PIC rtc
> 9: 0 XT-PIC acpi
> 10: 20 XT-PIC aic7xxx
> 11: 49135 XT-PIC uhci-hcd, eth0
> 12: 60 XT-PIC i8042
> 14: 6082 XT-PIC ide0
> 15: 9 XT-PIC ide1
> NMI: 0
> LOC: 12193302
> ERR: 0
> MIS: 0
>
>
> Since this box has ACPI why didn't it move the PCI SCSI controller
> (aic7xxx) to a higher IRQ?
>
> I thought this would happen with ACPI enabled?
This system appears to be in PIC mode, not IOAPIC mode, so irq 15 is as
high as it goes.
Regards -- Andy