To further assist anyone wishing to hack on sata_promise.c, I just
uploaded the long-since-GPL'd vendor drivers for Generation-I and
Generation-II chipsets to http://gkernel.sourceforge.net/specs/promise/
This should help with isolating the proper initialization sequence for a
given set of chips, particularly.
If someone knows of updated versions of these GPL'd drivers, please let
me know.
Jeff
> To further assist anyone wishing to hack on sata_promise.c, I just
> uploaded the long-since-GPL'd vendor drivers for Generation-I and
> Generation-II chipsets to
> http://gkernel.sourceforge.net/specs/promise/
>
> This should help with isolating the proper initialization
> sequence for a given set of chips, particularly.
>
> If someone knows of updated versions of these GPL'd drivers,
> please let me know.
The uploaded versions seem to be version 1.00.0.15 for kernel 2.4 only.
The newest version (for sataII TX4/300, TX4/150 and friends) I find on
the promise website is 1.01.0.20 for the 2.6 kernel series; not much
newer though, the files are timestamped 2005-07-05.
Also: I'm not quite sure about the license: while the top level files
are GPL, the stuff in cam/ subdirectory seems to have a differenc
license:
* Copyright (c) 2002 Promise Technology, Inc. All rights reserved.
* No part of this document may be reproduced or transmitted in any form
or
* by any means, electronic or mechanical, for any purpose, without the
* express written permission of Promise Technology, Inc.
Same license appears in the archives you uploaded to sourceforge btw.
I had been using the promise drivers for quite some time on 2.6.13
because I needed the hotplug functionality - didn't work reliably
though, used to crash the kernel with about 25% probability when
connecting new drives.
Finaly gave up a few days ago, got a SiI 3114 based controller and
upgraded to 2.6.18 which has the new eh and hotplug for that chipset.
Bye, Martin