> -----Original Message-----
> From: U-Boot [mailto:[email protected]] On Behalf Of
> [email protected]
> Sent: Thursday, July 27, 2017 3:19 PM
> To: [email protected]
> Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
> <[email protected]>; Mihai Emilian Bantea <[email protected]>;
> Horia Geantă <[email protected]>; Marc Zyngier
> <[email protected]>; Gang Liu <[email protected]>; open list <linux-
> [email protected]>; Scott Wood <[email protected]>; Rajat Srivastava
> <[email protected]>; Yinbo Zhu <[email protected]>; moderated
> list:ARM64 PORT (AARCH64 ARCHITECTURE) <linux-arm-
> [email protected]>
> Subject: [U-Boot] [PATCH] config: ls1012aqds: Add USB EHCI support for
> ls1012aqds
>
> From: Rajesh Bhagat <[email protected]>
>
> Add USB EHCI support for ls1012aqds platform
>
> Signed-off-by: Rajat Srivastava <[email protected]>
> Signed-off-by: Rajesh Bhagat <[email protected]>
> Signed-off-by: yinbo.zhu <[email protected]>
> ---
> arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h | 1 +
> include/configs/ls1012aqds.h | 2 ++
> include/usb/ehci-ci.h | 2 +-
> 3 files changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
> b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
> index 8ad199f..4afc338 100644
> --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
> +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
> @@ -35,6 +35,7 @@
> #define CONFIG_SYS_XHCI_USB1_ADDR (CONFIG_SYS_IMMR +
> 0x01f00000)
> #define CONFIG_SYS_XHCI_USB2_ADDR (CONFIG_SYS_IMMR +
> 0x02000000)
> #define CONFIG_SYS_XHCI_USB3_ADDR (CONFIG_SYS_IMMR +
> 0x02100000)
> +#define CONFIG_SYS_EHCI_USB1_ADDR (CONFIG_SYS_IMMR +
> 0x07600000)
> #define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_IMMR +
> 0x2400000)
> #define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_IMMR +
> 0x2500000)
> #define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_IMMR +
> 0x2600000)
> diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
> index 5b8500b..55f2578 100644
> --- a/include/configs/ls1012aqds.h
> +++ b/include/configs/ls1012aqds.h
> @@ -115,6 +115,8 @@
>
> #ifdef CONFIG_HAS_FSL_DR_USB
> #define CONFIG_USB_EHCI_FSL
> +#define CONFIG_USB_ULPI
> +#define CONFIG_USB_ULPI_VIEWPORT
> #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
> #endif
>
> diff --git a/include/usb/ehci-ci.h b/include/usb/ehci-ci.h
> index 847b698..cd3eb47 100644
> --- a/include/usb/ehci-ci.h
> +++ b/include/usb/ehci-ci.h
> @@ -156,7 +156,7 @@
> #elif defined(CONFIG_MPC85xx)
> #define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_MPC85xx_USB1_ADDR
> #define CONFIG_SYS_FSL_USB2_ADDR CONFIG_SYS_MPC85xx_USB2_ADDR
> -#elif defined(CONFIG_ARCH_LS1021A)
> +#elif defined(CONFIG_LS102XA) || defined(CONFIG_ARCH_LS1012A)
Why CONFIG_ARCH_LS1021A has been replaced by CONFIG_LS102XA?
-prabhakar