Add dma multiplexer support for the Sophgo CV1800/SG2000 SoCs.
As the syscon device of CV1800 have a usb phy subdevices. The
binding of the syscon can not be complete without the usb phy
is finished. As a result, the binding of syscon is removed
and will be evolved in its original series after the usb phy
binding is fully explored.
Changed from v6:
1. fix copyright time.
2. driver only output mapping info in when debugging.
3. remove dma-master check in the driver init since the binding
always require it.
Changed from v5:
1. remove dead binding header.
2. make "reg" required so the syscon binding can have the same
example node of the dmamux binding.
Changed from v4:
1. remove the syscon binding since it can not be complete (still
lack some subdevices)
2. add reg description for the binding,
3. remove the fixed channel assign for dmamux binding
3. driver adopt to the binding change. Now the driver allocates all the
channel when initing and maps the request chan to the channel dynamicly.
Changed from v3:
1. fix dt-binding address issue.
Changed from v2:
1. add reg property of dmamux node in the binding of patch 2
Changed from v1:
1. fix wrong title of patch 2.
Inochi Amaoto (3):
dt-bindings: dmaengine: Add dma multiplexer for CV18XX/SG200X series
SoC
soc/sophgo: add top sysctrl layout file for CV18XX/SG200X
dmaengine: add driver for Sophgo CV18XX/SG200X dmamux
.../bindings/dma/sophgo,cv1800-dmamux.yaml | 51 ++++
drivers/dma/Kconfig | 9 +
drivers/dma/Makefile | 1 +
drivers/dma/cv1800-dmamux.c | 260 ++++++++++++++++++
include/soc/sophgo/cv1800-sysctl.h | 30 ++
5 files changed, 351 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/sophgo,cv1800-dmamux.yaml
create mode 100644 drivers/dma/cv1800-dmamux.c
create mode 100644 include/soc/sophgo/cv1800-sysctl.h
--
2.44.0
The DMA IP of Sophgo CV18XX/SG200X is based on a DW AXI CORE, with
an additional channel remap register located in the top system control
area. The DMA channel is exclusive to each core.
In addition, the DMA multiplexer is a subdevice of system controller,
so this binding only contains necessary properties for the multiplexer
itself.
Add the dmamux binding for CV18XX/SG200X series SoC.
Signed-off-by: Inochi Amaoto <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
---
.../bindings/dma/sophgo,cv1800-dmamux.yaml | 51 +++++++++++++++++++
1 file changed, 51 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/sophgo,cv1800-dmamux.yaml
diff --git a/Documentation/devicetree/bindings/dma/sophgo,cv1800-dmamux.yaml b/Documentation/devicetree/bindings/dma/sophgo,cv1800-dmamux.yaml
new file mode 100644
index 000000000000..480cb117db9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/sophgo,cv1800-dmamux.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/sophgo,cv1800-dmamux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo CV1800/SG200 Series DMA multiplexer
+
+maintainers:
+ - Inochi Amaoto <[email protected]>
+
+description: |
+ The DMA multiplexer of CV1800 is a subdevice of the system
+ controller. It support mapping 8 channels, but each channel
+ can be mapped only once.
+
+allOf:
+ - $ref: dma-router.yaml#
+
+properties:
+ compatible:
+ const: sophgo,cv1800-dmamux
+
+ reg:
+ items:
+ - description: DMA channal remapping register
+ - description: DMA channel interrupt mapping register
+
+ '#dma-cells':
+ const: 2
+ description:
+ The first cells is device id. The second one is the cpu id.
+
+ dma-masters:
+ maxItems: 1
+
+required:
+ - reg
+ - '#dma-cells'
+ - dma-masters
+
+additionalProperties: false
+
+examples:
+ - |
+ dma-router@154 {
+ compatible = "sophgo,cv1800-dmamux";
+ reg = <0x154 0x8>, <0x298 0x4>;
+ #dma-cells = <2>;
+ dma-masters = <&dmac>;
+ };
--
2.44.0
The "top" system controller of CV18XX/SG200X exposes control
register access for various devices. Add soc header file to
describe it.
Signed-off-by: Inochi Amaoto <[email protected]>
---
include/soc/sophgo/cv1800-sysctl.h | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
create mode 100644 include/soc/sophgo/cv1800-sysctl.h
diff --git a/include/soc/sophgo/cv1800-sysctl.h b/include/soc/sophgo/cv1800-sysctl.h
new file mode 100644
index 000000000000..b9396d33e240
--- /dev/null
+++ b/include/soc/sophgo/cv1800-sysctl.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2023 Inochi Amaoto <[email protected]>
+ */
+
+#ifndef CV1800_SYSCTL_H
+#define CV1800_SYSCTL_H
+
+/*
+ * SOPHGO CV1800/SG2000 SoC top system controller registers offsets.
+ */
+
+#define CV1800_CONF_INFO 0x004
+#define CV1800_SYS_CTRL_REG 0x008
+#define CV1800_USB_PHY_CTRL_REG 0x048
+#define CV1800_SDMA_DMA_CHANNEL_REMAP0 0x154
+#define CV1800_SDMA_DMA_CHANNEL_REMAP1 0x158
+#define CV1800_TOP_TIMER_CLK_SEL 0x1a0
+#define CV1800_TOP_WDT_CTRL 0x1a8
+#define CV1800_DDR_AXI_URGENT_OW 0x1b8
+#define CV1800_DDR_AXI_URGENT 0x1bc
+#define CV1800_DDR_AXI_QOS_0 0x1d8
+#define CV1800_DDR_AXI_QOS_1 0x1dc
+#define CV1800_SD_PWRSW_CTRL 0x1f4
+#define CV1800_SD_PWRSW_TIME 0x1f8
+#define CV1800_DDR_AXI_QOS_OW 0x23c
+#define CV1800_SD_CTRL_OPT 0x294
+#define CV1800_SDMA_DMA_INT_MUX 0x298
+
+#endif // CV1800_SYSCTL_H
--
2.44.0
Sophgo CV18XX/SG200X use DW AXI CORE with a multiplexer for remapping
its request lines. The multiplexer supports at most 8 request lines.
Add driver for Sophgo CV18XX/SG200X DMA multiplexer.
Signed-off-by: Inochi Amaoto <[email protected]>
---
drivers/dma/Kconfig | 9 ++
drivers/dma/Makefile | 1 +
drivers/dma/cv1800-dmamux.c | 260 ++++++++++++++++++++++++++++++++++++
3 files changed, 270 insertions(+)
create mode 100644 drivers/dma/cv1800-dmamux.c
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 002a5ec80620..cb31520b9f86 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -546,6 +546,15 @@ config PLX_DMA
These are exposed via extra functions on the switch's
upstream port. Each function exposes one DMA channel.
+config SOPHGO_CV1800_DMAMUX
+ tristate "Sophgo CV1800/SG2000 series SoC DMA multiplexer support"
+ depends on MFD_SYSCON
+ depends on ARCH_SOPHGO
+ help
+ Support for the DMA multiplexer on Sophgo CV1800/SG2000
+ series SoCs.
+ Say Y here if your board have this soc.
+
config STE_DMA40
bool "ST-Ericsson DMA40 support"
depends on ARCH_U8500
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index dfd40d14e408..7465f249ee47 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -67,6 +67,7 @@ obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
obj-$(CONFIG_PXA_DMA) += pxa_dma.o
obj-$(CONFIG_RENESAS_DMA) += sh/
obj-$(CONFIG_SF_PDMA) += sf-pdma/
+obj-$(CONFIG_SOPHGO_CV1800_DMAMUX) += cv1800-dmamux.o
obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
obj-$(CONFIG_STM32_DMA) += stm32-dma.o
obj-$(CONFIG_STM32_DMAMUX) += stm32-dmamux.o
diff --git a/drivers/dma/cv1800-dmamux.c b/drivers/dma/cv1800-dmamux.c
new file mode 100644
index 000000000000..ccee023f9d1d
--- /dev/null
+++ b/drivers/dma/cv1800-dmamux.c
@@ -0,0 +1,260 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2024 Inochi Amaoto <[email protected]>
+ */
+
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/of_dma.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/llist.h>
+#include <linux/regmap.h>
+#include <linux/spinlock.h>
+#include <linux/mfd/syscon.h>
+
+#include <soc/sophgo/cv1800-sysctl.h>
+
+#define DMAMUX_NCELLS 2
+#define MAX_DMA_MAPPING_ID 42
+#define MAX_DMA_CPU_ID 2
+#define MAX_DMA_CH_ID 7
+
+#define DMAMUX_INTMUX_REGISTER_LEN 4
+#define DMAMUX_NR_CH_PER_REGISTER 4
+#define DMAMUX_BIT_PER_CH 8
+#define DMAMUX_CH_MASk GENMASK(5, 0)
+#define DMAMUX_INT_BIT_PER_CPU 10
+#define DMAMUX_CH_UPDATE_BIT BIT(31)
+
+#define DMAMUX_CH_REGPOS(chid) \
+ ((chid) / DMAMUX_NR_CH_PER_REGISTER)
+#define DMAMUX_CH_REGOFF(chid) \
+ ((chid) % DMAMUX_NR_CH_PER_REGISTER)
+#define DMAMUX_CH_REG(chid) \
+ ((DMAMUX_CH_REGPOS(chid) * sizeof(u32)) + \
+ CV1800_SDMA_DMA_CHANNEL_REMAP0)
+#define DMAMUX_CH_SET(chid, val) \
+ (((val) << (DMAMUX_CH_REGOFF(chid) * DMAMUX_BIT_PER_CH)) | \
+ DMAMUX_CH_UPDATE_BIT)
+#define DMAMUX_CH_MASK(chid) \
+ DMAMUX_CH_SET(chid, DMAMUX_CH_MASk)
+
+#define DMAMUX_INT_BIT(chid, cpuid) \
+ BIT((cpuid) * DMAMUX_INT_BIT_PER_CPU + (chid))
+#define DMAMUX_INTEN_BIT(cpuid) \
+ DMAMUX_INT_BIT(8, cpuid)
+#define DMAMUX_INT_CH_BIT(chid, cpuid) \
+ (DMAMUX_INT_BIT(chid, cpuid) | DMAMUX_INTEN_BIT(cpuid))
+#define DMAMUX_INT_MASK(chid) \
+ (DMAMUX_INT_BIT(chid, 0) | \
+ DMAMUX_INT_BIT(chid, 1) | \
+ DMAMUX_INT_BIT(chid, 2))
+#define DMAMUX_INT_CH_MASK(chid, cpuid) \
+ (DMAMUX_INT_MASK(chid) | DMAMUX_INTEN_BIT(cpuid))
+
+struct cv1800_dmamux_data {
+ struct dma_router dmarouter;
+ struct regmap *regmap;
+ spinlock_t lock;
+ struct llist_head free_maps;
+ struct llist_head reserve_maps;
+ DECLARE_BITMAP(mapped_peripherals, MAX_DMA_MAPPING_ID);
+};
+
+struct cv1800_dmamux_map {
+ struct llist_node node;
+ unsigned int channel;
+ unsigned int peripheral;
+ unsigned int cpu;
+};
+
+static void cv1800_dmamux_free(struct device *dev, void *route_data)
+{
+ struct cv1800_dmamux_data *dmamux = dev_get_drvdata(dev);
+ struct cv1800_dmamux_map *map = route_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dmamux->lock, flags);
+
+ regmap_update_bits(dmamux->regmap,
+ DMAMUX_CH_REG(map->channel),
+ DMAMUX_CH_MASK(map->channel),
+ DMAMUX_CH_UPDATE_BIT);
+
+ regmap_update_bits(dmamux->regmap, CV1800_SDMA_DMA_INT_MUX,
+ DMAMUX_INT_CH_MASK(map->channel, map->cpu),
+ DMAMUX_INTEN_BIT(map->cpu));
+
+ spin_unlock_irqrestore(&dmamux->lock, flags);
+
+ dev_dbg(dev, "free channel %u for req %u (cpu %u)\n",
+ map->channel, map->peripheral, map->cpu);
+}
+
+static void *cv1800_dmamux_route_allocate(struct of_phandle_args *dma_spec,
+ struct of_dma *ofdma)
+{
+ struct platform_device *pdev = of_find_device_by_node(ofdma->of_node);
+ struct cv1800_dmamux_data *dmamux = platform_get_drvdata(pdev);
+ struct cv1800_dmamux_map *map;
+ struct llist_node *node;
+ unsigned long flags;
+ unsigned int chid, devid, cpuid;
+ int ret;
+
+ if (dma_spec->args_count != DMAMUX_NCELLS) {
+ dev_err(&pdev->dev, "invalid number of dma mux args\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ devid = dma_spec->args[0];
+ cpuid = dma_spec->args[1];
+ dma_spec->args_count = 1;
+
+ if (devid > MAX_DMA_MAPPING_ID) {
+ dev_err(&pdev->dev, "invalid device id: %u\n", devid);
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (cpuid > MAX_DMA_CPU_ID) {
+ dev_err(&pdev->dev, "invalid cpu id: %u\n", cpuid);
+ return ERR_PTR(-EINVAL);
+ }
+
+ dma_spec->np = of_parse_phandle(ofdma->of_node, "dma-masters", 0);
+ if (!dma_spec->np) {
+ dev_err(&pdev->dev, "can't get dma master\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ spin_lock_irqsave(&dmamux->lock, flags);
+
+ if (test_bit(devid, dmamux->mapped_peripherals)) {
+ llist_for_each_entry(map, dmamux->reserve_maps.first, node) {
+ if (map->peripheral == devid && map->cpu == cpuid)
+ goto found;
+ }
+
+ ret = -EINVAL;
+ goto failed;
+ } else {
+ node = llist_del_first(&dmamux->free_maps);
+ if (!node) {
+ ret = -ENODEV;
+ goto failed;
+ }
+
+ map = llist_entry(node, struct cv1800_dmamux_map, node);
+ llist_add(&map->node, &dmamux->reserve_maps);
+ set_bit(devid, dmamux->mapped_peripherals);
+ }
+
+found:
+ chid = map->channel;
+ map->peripheral = devid;
+ map->cpu = cpuid;
+
+ regmap_set_bits(dmamux->regmap,
+ DMAMUX_CH_REG(chid),
+ DMAMUX_CH_SET(chid, devid));
+
+ regmap_update_bits(dmamux->regmap, CV1800_SDMA_DMA_INT_MUX,
+ DMAMUX_INT_CH_MASK(chid, cpuid),
+ DMAMUX_INT_CH_BIT(chid, cpuid));
+
+ spin_unlock_irqrestore(&dmamux->lock, flags);
+
+ dma_spec->args[0] = chid;
+
+ dev_dbg(&pdev->dev, "register channel %u for req %u (cpu %u)\n",
+ chid, devid, cpuid);
+
+ return map;
+
+failed:
+ spin_unlock_irqrestore(&dmamux->lock, flags);
+ of_node_put(dma_spec->np);
+ dev_err(&pdev->dev, "errno %d\n", ret);
+ return ERR_PTR(ret);
+
+}
+
+static int cv1800_dmamux_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *mux_node = dev->of_node;
+ struct cv1800_dmamux_data *data;
+ struct cv1800_dmamux_map *tmp;
+ struct device *parent = dev->parent;
+ struct device_node *dma_master;
+ struct regmap *regmap = NULL;
+ unsigned int i;
+
+ if (!parent)
+ return -ENODEV;
+
+ regmap = device_node_to_regmap(parent->of_node);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ data = devm_kmalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ spin_lock_init(&data->lock);
+ init_llist_head(&data->free_maps);
+
+ for (i = 0; i <= MAX_DMA_CH_ID; i++) {
+ tmp = devm_kmalloc(dev, sizeof(*tmp), GFP_KERNEL);
+ if (!tmp) {
+ /* It is OK for not allocating all channel */
+ dev_warn(dev, "can not allocate channel %u\n", i);
+ continue;
+ }
+
+ init_llist_node(&tmp->node);
+ tmp->channel = i;
+ llist_add(&tmp->node, &data->free_maps);
+ }
+
+ /* if no channel is allocated, the probe must fail */
+ if (llist_empty(&data->free_maps))
+ return -ENOMEM;
+
+ data->regmap = regmap;
+ data->dmarouter.dev = dev;
+ data->dmarouter.route_free = cv1800_dmamux_free;
+
+ platform_set_drvdata(pdev, data);
+
+ return of_dma_router_register(mux_node,
+ cv1800_dmamux_route_allocate,
+ &data->dmarouter);
+}
+
+static void cv1800_dmamux_remove(struct platform_device *pdev)
+{
+ of_dma_controller_free(pdev->dev.of_node);
+}
+
+static const struct of_device_id cv1800_dmamux_ids[] = {
+ { .compatible = "sophgo,cv1800-dmamux", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, cv1800_dmamux_ids);
+
+static struct platform_driver cv1800_dmamux_driver = {
+ .driver = {
+ .name = "cv1800-dmamux",
+ .of_match_table = cv1800_dmamux_ids,
+ },
+ .probe = cv1800_dmamux_probe,
+ .remove_new = cv1800_dmamux_remove,
+};
+module_platform_driver(cv1800_dmamux_driver);
+
+MODULE_AUTHOR("Inochi Amaoto <[email protected]>");
+MODULE_DESCRIPTION("Sophgo CV1800/SG2000 Series Soc DMAMUX driver");
+MODULE_LICENSE("GPL");
--
2.44.0
Hi Inochi,
kernel test robot noticed the following build warnings:
[auto build test WARNING on vkoul-dmaengine/next]
[also build test WARNING on robh/for-next krzk-dt/for-next linus/master v6.9-rc3 next-20240410]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Inochi-Amaoto/dt-bindings-dmaengine-Add-dma-multiplexer-for-CV18XX-SG200X-series-SoC/20240410-092207
base: https://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine.git next
patch link: https://lore.kernel.org/r/IA1PR20MB495310B8E4D7A6705A112004BB062%40IA1PR20MB4953.namprd20.prod.outlook.com
patch subject: [PATCH v7 3/3] dmaengine: add driver for Sophgo CV18XX/SG200X dmamux
config: riscv-allyesconfig (https://download.01.org/0day-ci/archive/20240411/[email protected]/config)
compiler: clang version 19.0.0git (https://github.com/llvm/llvm-project 8b3b4a92adee40483c27f26c478a384cd69c6f05)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240411/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All warnings (new ones prefixed by >>):
In file included from drivers/dma/cv1800-dmamux.c:8:
In file included from include/linux/of_dma.h:14:
In file included from include/linux/dmaengine.h:12:
In file included from include/linux/scatterlist.h:8:
In file included from include/linux/mm.h:2208:
include/linux/vmstat.h:508:43: warning: arithmetic between different enumeration types ('enum zone_stat_item' and 'enum numa_stat_item') [-Wenum-enum-conversion]
508 | return vmstat_text[NR_VM_ZONE_STAT_ITEMS +
| ~~~~~~~~~~~~~~~~~~~~~ ^
509 | item];
| ~~~~
include/linux/vmstat.h:515:43: warning: arithmetic between different enumeration types ('enum zone_stat_item' and 'enum numa_stat_item') [-Wenum-enum-conversion]
515 | return vmstat_text[NR_VM_ZONE_STAT_ITEMS +
| ~~~~~~~~~~~~~~~~~~~~~ ^
516 | NR_VM_NUMA_EVENT_ITEMS +
| ~~~~~~~~~~~~~~~~~~~~~~
include/linux/vmstat.h:522:36: warning: arithmetic between different enumeration types ('enum node_stat_item' and 'enum lru_list') [-Wenum-enum-conversion]
522 | return node_stat_name(NR_LRU_BASE + lru) + 3; // skip "nr_"
| ~~~~~~~~~~~ ^ ~~~
include/linux/vmstat.h:527:43: warning: arithmetic between different enumeration types ('enum zone_stat_item' and 'enum numa_stat_item') [-Wenum-enum-conversion]
527 | return vmstat_text[NR_VM_ZONE_STAT_ITEMS +
| ~~~~~~~~~~~~~~~~~~~~~ ^
528 | NR_VM_NUMA_EVENT_ITEMS +
| ~~~~~~~~~~~~~~~~~~~~~~
include/linux/vmstat.h:536:43: warning: arithmetic between different enumeration types ('enum zone_stat_item' and 'enum numa_stat_item') [-Wenum-enum-conversion]
536 | return vmstat_text[NR_VM_ZONE_STAT_ITEMS +
| ~~~~~~~~~~~~~~~~~~~~~ ^
537 | NR_VM_NUMA_EVENT_ITEMS +
| ~~~~~~~~~~~~~~~~~~~~~~
>> drivers/dma/cv1800-dmamux.c:191:22: warning: unused variable 'dma_master' [-Wunused-variable]
191 | struct device_node *dma_master;
| ^~~~~~~~~~
6 warnings generated.
vim +/dma_master +191 drivers/dma/cv1800-dmamux.c
183
184 static int cv1800_dmamux_probe(struct platform_device *pdev)
185 {
186 struct device *dev = &pdev->dev;
187 struct device_node *mux_node = dev->of_node;
188 struct cv1800_dmamux_data *data;
189 struct cv1800_dmamux_map *tmp;
190 struct device *parent = dev->parent;
> 191 struct device_node *dma_master;
192 struct regmap *regmap = NULL;
193 unsigned int i;
194
195 if (!parent)
196 return -ENODEV;
197
198 regmap = device_node_to_regmap(parent->of_node);
199 if (IS_ERR(regmap))
200 return PTR_ERR(regmap);
201
202 data = devm_kmalloc(dev, sizeof(*data), GFP_KERNEL);
203 if (!data)
204 return -ENOMEM;
205
206 spin_lock_init(&data->lock);
207 init_llist_head(&data->free_maps);
208
209 for (i = 0; i <= MAX_DMA_CH_ID; i++) {
210 tmp = devm_kmalloc(dev, sizeof(*tmp), GFP_KERNEL);
211 if (!tmp) {
212 /* It is OK for not allocating all channel */
213 dev_warn(dev, "can not allocate channel %u\n", i);
214 continue;
215 }
216
217 init_llist_node(&tmp->node);
218 tmp->channel = i;
219 llist_add(&tmp->node, &data->free_maps);
220 }
221
222 /* if no channel is allocated, the probe must fail */
223 if (llist_empty(&data->free_maps))
224 return -ENOMEM;
225
226 data->regmap = regmap;
227 data->dmarouter.dev = dev;
228 data->dmarouter.route_free = cv1800_dmamux_free;
229
230 platform_set_drvdata(pdev, data);
231
232 return of_dma_router_register(mux_node,
233 cv1800_dmamux_route_allocate,
234 &data->dmarouter);
235 }
236
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki