linux/score lastest patch place at
http://www.sunplusct.com/images/linux-score-patch/linux-score-20090324.patch
diff -uprN -x linux-2.6-git.ori/Documentation/dontdiff
linux-2.6-git.ori/arch/score/boot/Makefile
linux-2.6-git.new/arch/score/boot/Makefile
--- linux-2.6-git.ori/arch/score/boot/Makefile 1970-01-01
08:00:00.000000000 +0800
+++ linux-2.6-git.new/arch/score/boot/Makefile 2009-03-24
16:55:29.000000000 +0800
@@ -0,0 +1,12 @@
+#
+# arch/score/boot/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General
Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+targets := vmlinux.bin
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
diff -uprN -x linux-2.6-git.ori/Documentation/dontdiff
linux-2.6-git.ori/arch/score/configs/spct6600_defconfig
linux-2.6-git.new/arch/score/configs/spct6600_defconfig
--- linux-2.6-git.ori/arch/score/configs/spct6600_defconfig 1970-01-01
08:00:00.000000000 +0800
+++ linux-2.6-git.new/arch/score/configs/spct6600_defconfig 2009-03-26
16:16:28.000000000 +0800
@@ -0,0 +1,753 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 20 09:14:43 2009
+#
+CONFIG_SCORE=y
+
+#
+# Machine selection
+#
+CONFIG_MACH_SPCT6600=y
+# CONFIG_MACH_SPG300 is not set
+# CONFIG_SCORE_SIM is not set
+CONFIG_CPU_SCORE7=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SCORE_L1_CACHE_SHIFT=5
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+CONFIG_PAGE_SIZE_4KB=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_MEMORY_START=0xa0000000
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=100
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=12
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_PROBE_INITRD_HEADER is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_MMU=y
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+CONFIG_REALTEK_PHY=y
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_RIO is not set
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_SCT=y
+CONFIG_SERIAL_SCT_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_CMDLINE=""
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_NETWORK=y
+# CONFIG_SECURITY_NETWORK_XFRM is not set
+# CONFIG_SECURITY_PATH is not set
+CONFIG_SECURITY_FILE_CAPABILITIES=y
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_CRYPTD=y
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff -uprN -x linux-2.6-git.ori/Documentation/dontdiff
linux-2.6-git.ori/arch/score/include/asm/a.out.h
linux-2.6-git.new/arch/score/include/asm/a.out.h
--- linux-2.6-git.ori/arch/score/include/asm/a.out.h 1970-01-01
08:00:00.000000000 +0800
+++ linux-2.6-git.new/arch/score/include/asm/a.out.h 2009-03-13
14:26:33.000000000 +0800
@@ -0,0 +1,23 @@
+#ifndef _ASM_A_OUT_H
+#define _ASM_A_OUT_H
+
+struct exec
+{
+ unsigned long a_info; /* Use macros N_MAGIC, etc for access */
+ unsigned a_text; /* length of text, in bytes */
+ unsigned a_data; /* length of data, in bytes */
+ unsigned a_bss; /* length of uninitialized data area for
+ file, in bytes */
+ unsigned a_syms; /* length of symbol table data in file,
+ in bytes */
+ unsigned a_entry; /* start address */
+ unsigned a_trsize; /* length of relocation info for text, in
+ bytes */
+ unsigned a_drsize; /* length of relocation info for data, in
bytes */
+};
+
+#define N_TRSIZE(a) ((a).a_trsize)
+#define N_DRSIZE(a) ((a).a_drsize)
+#define N_SYMSIZE(a) ((a).a_syms)
+
+#endif /* _ASM_A_OUT_H */
diff -uprN -x linux-2.6-git.ori/Documentation/dontdiff
linux-2.6-git.ori/arch/score/include/asm/asm.h
linux-2.6-git.new/arch/score/include/asm/asm.h
--- linux-2.6-git.ori/arch/score/include/asm/asm.h 1970-01-01
08:00:00.000000000 +0800
+++ linux-2.6-git.new/arch/score/include/asm/asm.h 2009-03-19
11:47:06.000000000 +0800
@@ -0,0 +1,161 @@
+#ifndef __ASM_ASM_H
+#define __ASM_ASM_H
+
+#include <asm/asm-offsets.h>
+
+#ifdef __ASSEMBLY__
+
+.macro SAVE_ALL
+ mfcr r30, cr0
+ mv r31, r0
+ nop
+ /* if UMs == 1, change stack. */
+ slli.c r30, r30, 28
+ bpl 8f
+ la r31, kernelsp
+ lw r31, [r31]
+8:
+ mv r30, r0
+ addri r0, r31, -PT_SIZE
+
+ sw r30, [r0, PT_R0]
+ .set r1
+ sw r1, [r0, PT_R1]
+ .set nor1
+ sw r2, [r0, PT_R2]
+ sw r3, [r0, PT_R3]
+ sw r4, [r0, PT_R4]
+ sw r5, [r0, PT_R5]
+ sw r6, [r0, PT_R6]
+ sw r7, [r0, PT_R7]
+
+ sw r8, [r0, PT_R8]
+ sw r9, [r0, PT_R9]
+ sw r10, [r0, PT_R10]
+ sw r11, [r0, PT_R11]
+ sw r12, [r0, PT_R12]
+ sw r13, [r0, PT_R13]
+ sw r14, [r0, PT_R14]
+ sw r15, [r0, PT_R15]
+
+ sw r16, [r0, PT_R16]
+ sw r17, [r0, PT_R17]
+ sw r18, [r0, PT_R18]
+ sw r19, [r0, PT_R19]
+ sw r20, [r0, PT_R20]
+ sw r21, [r0, PT_R21]
+ sw r22, [r0, PT_R22]
+ sw r23, [r0, PT_R23]
+
+ sw r24, [r0, PT_R24]
+ sw r25, [r0, PT_R25]
+ sw r25, [r0, PT_R25]
+ sw r26, [r0, PT_R26]
+ sw r27, [r0, PT_R27]
+
+ sw r28, [r0, PT_R28]
+ sw r29, [r0, PT_R29]
+ orri r28, r0, 0x1fff
+ li r31, 0x00001fff
+ xor r28, r28, r31
+
+ mfcehl r30, r31
+ sw r30, [r0, PT_CEH]
+ sw r31, [r0, PT_CEL]
+
+ mfcr r31, cr0
+ sw r31, [r0, PT_PSR]
+
+ mfcr r31, cr1
+ sw r31, [r0, PT_CONDITION]
+
+ mfcr r31, cr2
+ sw r31, [r0, PT_ECR]
+
+ mfcr r31, cr5
+ srli r31, r31, 1
+ slli r31, r31, 1
+ sw r31, [r0, PT_EPC]
+.endm
+
+.macro RESTORE_ALL_AND_RET
+ mfcr r30, cr0
+ srli r30, r30, 1
+ slli r30, r30, 1
+ mtcr r30, cr0
+ nop
+ nop
+ nop
+ nop
+ nop
+
+ .set r1
+ ldis r1, 0x00ff
+ and r30, r30, r1
+ not r1, r1
+ lw r31, [r0, PT_PSR]
+ and r31, r31, r1
+ .set nor1
+ or r31, r31, r30
+ mtcr r31, cr0
+ nop
+ nop
+ nop
+ nop
+ nop
+
+ lw r30, [r0, PT_CONDITION]
+ mtcr r30, cr1
+ nop
+ nop
+ nop
+ nop
+ nop
+
+ lw r30, [r0, PT_CEH]
+ lw r31, [r0, PT_CEL]
+ mtcehl r30, r31
+
+ .set r1
+ lw r1, [r0, PT_R1]
+ .set nor1
+ lw r2, [r0, PT_R2]
+ lw r3, [r0, PT_R3]
+ lw r4, [r0, PT_R4]
+ lw r5, [r0, PT_R5]
+ lw r6, [r0, PT_R6]
+ lw r7, [r0, PT_R7]
+
+ lw r8, [r0, PT_R8]
+ lw r9, [r0, PT_R9]
+ lw r10, [r0, PT_R10]
+ lw r11, [r0, PT_R11]
+ lw r12, [r0, PT_R12]
+ lw r13, [r0, PT_R13]
+ lw r14, [r0, PT_R14]
+ lw r15, [r0, PT_R15]
+
+ lw r16, [r0, PT_R16]
+ lw r17, [r0, PT_R17]
+ lw r18, [r0, PT_R18]
+ lw r19, [r0, PT_R19]
+ lw r20, [r0, PT_R20]
+ lw r21, [r0, PT_R21]
+ lw r22, [r0, PT_R22]
+ lw r23, [r0, PT_R23]
+
+ lw r24, [r0, PT_R24]
+ lw r25, [r0, PT_R25]
+ lw r26, [r0, PT_R26]
+ lw r27, [r0, PT_R27]
+ lw r28, [r0, PT_R28]
+ lw r29, [r0, PT_R29]
+
+ lw r30, [r0, PT_EPC]
+ lw r0, [r0, PT_R0]
+ mtcr r30, cr5
+ rte
+.endm
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_ASM_H */
diff -uprN -x linux-2.6-git.ori/Documentation/dontdiff
linux-2.6-git.ori/arch/score/include/asm/atomic.h
linux-2.6-git.new/arch/score/include/asm/atomic.h
--- linux-2.6-git.ori/arch/score/include/asm/atomic.h 1970-01-01
08:00:00.000000000 +0800
+++ linux-2.6-git.new/arch/score/include/asm/atomic.h 2009-03-23
17:45:14.000000000 +0800
@@ -0,0 +1,240 @@
+#ifndef _ASM_ATOMIC_H
+#define _ASM_ATOMIC_H
+
+#include <linux/irqflags.h>
+#include <asm/system.h>
+
+#define ATOMIC_INIT(i) {(i)}
+
+/*
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically reads the value of @v.
+ */
+#define atomic_read(v) ((v)->counter)
+
+/*
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.
+ */
+#define atomic_set(v, i) ((v)->counter = (i))
+
+/*
+ * atomic_add - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v.
+ */
+static __inline__ void atomic_add(int i, atomic_t *v)
+{
+ unsigned long flags;
+
+ raw_local_irq_save(flags);
+ v->counter += i;
+ raw_local_irq_restore(flags);
+}
+
+/*
+ * atomic_sub - subtract the atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v.
+ */
+static __inline__ void atomic_sub(int i, atomic_t *v)
+{
+ unsigned long flags;
+
+ raw_local_irq_save(flags);
+ v->counter -= i;
+ raw_local_irq_restore(flags);
+}
+
+/*
+ * Same as above, but return the result value
+ */
+static __inline__ int atomic_add_return(int i, atomic_t *v)
+{
+ unsigned long flags;
+ int temp;
+
+ raw_local_irq_save(flags);
+ temp = v->counter;
+ temp += i;
+ v->counter = temp;
+ raw_local_irq_restore(flags);
+
+ return temp;
+}
+
+static __inline__ int atomic_sub_return(int i, atomic_t *v)
+{
+ unsigned long flags;
+ int temp;
+
+ raw_local_irq_save(flags);
+ temp = v->counter;
+ temp -= i;
+ v->counter = temp;
+ raw_local_irq_restore(flags);
+
+ return temp;
+}
+
+/*
+ * atomic_sub_if_positive - conditionally subtract integer from atomic
variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically test @v and subtract @i if @v is greater or equal than @i.
+ * The function returns the old value of @v minus @i.
+ */
+static __inline__ int atomic_sub_if_positive(int i, atomic_t *v)
+{
+ unsigned long result;
+ unsigned long flags;
+
+ raw_local_irq_save(flags);
+ result = v->counter;
+ result -= i;
+ if (result >= 0)
+ v->counter = result;
+ raw_local_irq_restore(flags);
+
+ return result;
+}
+
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+ unsigned long flags;
+ int prev;
+
+ raw_local_irq_save(flags);
+ prev = atomic_read(v);
+ if (prev == old)
+ atomic_set(v, new);
+ raw_local_irq_restore(flags);
+ return prev;
+}
+
+static inline int atomic_xchg(atomic_t *v, int new)
+{
+ unsigned long flags;
+ int prev;
+
+ raw_local_irq_save(flags);
+ prev = atomic_read(v);
+ atomic_set(v, new);
+ raw_local_irq_restore(flags);
+ return prev;
+}
+
+/**
+ * atomic_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+{
+ int c, old;
+ c = atomic_read(v);
+ for (;;) {
+ if (unlikely(c == (u)))
+ break;
+ old = atomic_cmpxchg((v), c, c + (a));
+ if (likely(old == c))
+ break;
+ c = old;
+ }
+ return c != (u);
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#define atomic_dec_return(v) atomic_sub_return(1, (v))
+#define atomic_inc_return(v) atomic_add_return(1, (v))
+
+/*
+ * atomic_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0)
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+/*
+ * atomic_dec_and_test - decrement by 1 and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
+
+/*
+ * atomic_dec_if_positive - decrement by 1 if old value positive
+ * @v: pointer of type atomic_t
+ */
+#define atomic_dec_if_positive(v) atomic_sub_if_positive(1, v)
+
+/*
+ * atomic_inc - increment atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1.
+ */
+#define atomic_inc(v) atomic_add(1, (v))
+
+/*
+ * atomic_dec - decrement and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1.
+ */
+#define atomic_dec(v) atomic_sub(1, (v))
+
+/*
+ * atomic_add_negative - add and test if negative
+ * @v: pointer of type atomic_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @v and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+#define atomic_add_negative(i, v) (atomic_add_return(i, (v)) < 0)
+
+/*
+ * atomic*_return operations are serializing but not the non-*_return
+ * versions.
+ */
+#define smp_mb__before_atomic_dec() barrier()
+#define smp_mb__after_atomic_dec() barrier()
+#define smp_mb__before_atomic_inc() barrier()
+#define smp_mb__after_atomic_inc() barrier()
+
+#include <asm-generic/atomic.h>
+#endif /* _ASM_ATOMIC_H */
diff -uprN -x linux-2.6-git.ori/Documentation/dontdiff
linux-2.6-git.ori/arch/score/include/asm/auxvec.h
linux-2.6-git.new/arch/score/include/asm/auxvec.h
--- linux-2.6-git.ori/arch/score/include/asm/auxvec.h 1970-01-01
08:00:00.000000000 +0800
+++ linux-2.6-git.new/arch/score/include/asm/auxvec.h 2009-03-13
14:26:33.000000000 +0800
@@ -0,0 +1,4 @@
+#ifndef _ASM_AUXVEC_H
+#define _ASM_AUXVEC_H
+
+#endif /* _ASM_AUXVEC_H */
diff -uprN -x linux-2.6-git.ori/Documentation/dontdiff
linux-2.6-git.ori/arch/score/include/asm/bitops.h
linux-2.6-git.new/arch/score/include/asm/bitops.h
--- linux-2.6-git.ori/arch/score/include/asm/bitops.h 1970-01-01
08:00:00.000000000 +0800
+++ linux-2.6-git.new/arch/score/include/asm/bitops.h 2009-03-25
09:48:23.000000000 +0800
@@ -0,0 +1,253 @@
+#ifndef _ASM_BITOPS_H
+#define _ASM_BITOPS_H
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <linux/compiler.h>
+#include <linux/irqflags.h>
+#include <linux/types.h>
+#include <asm/system.h>
+#include <asm/byteorder.h>
+
+#define SZLONG_LOG 5
+#define SZLONG_MASK 31UL
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit() barrier()
+#define smp_mb__after_clear_bit() barrier()
+
+/*
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered. See __set_bit()
+ * if you do not require the atomic guarantees.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void set_bit(unsigned long nr, volatile unsigned long
*addr)
+{
+ unsigned short bit = nr & SZLONG_MASK;
+
+ volatile unsigned long *a = addr;
+ unsigned long mask;
+ unsigned long flags;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ *a |= mask;
+ raw_local_irq_restore(flags);
+}
+
+/*
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered. However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or
smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+static inline void clear_bit(unsigned long nr, volatile unsigned long
*addr)
+{
+ unsigned short bit = nr & SZLONG_MASK;
+
+ volatile unsigned long *a = addr;
+ unsigned long mask;
+ unsigned long flags;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ *a &= ~mask;
+ raw_local_irq_restore(flags);
+}
+
+/*
+ * clear_bit_unlock - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and implies release semantics before the memory
+ * operation. It can be used for an unlock.
+ */
+static inline void
+clear_bit_unlock(unsigned long nr, volatile unsigned long *addr)
+{
+ clear_bit(nr, addr);
+}
+
+/*
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void change_bit(unsigned long nr, volatile unsigned long
*addr)
+{
+ unsigned short bit = nr & SZLONG_MASK;
+ volatile unsigned long *a = addr;
+ unsigned long mask;
+ unsigned long flags;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ *a ^= mask;
+ raw_local_irq_restore(flags);
+}
+
+/*
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int
+test_and_set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ unsigned short bit = nr & SZLONG_MASK;
+ unsigned long res;
+ volatile unsigned long *a = addr;
+ unsigned long mask;
+ unsigned long flags;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ res = (mask & *a);
+ *a |= mask;
+ raw_local_irq_restore(flags);
+
+ return res != 0;
+}
+
+/*
+ * test_and_set_bit_lock - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and implies acquire ordering semantics
+ * after the memory operation.
+ */
+static inline int
+test_and_set_bit_lock(unsigned long nr, volatile unsigned long *addr)
+{
+ unsigned short bit = nr & SZLONG_MASK;
+ unsigned long res;
+ volatile unsigned long *a = addr;
+ unsigned long mask;
+ unsigned long flags;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ res = (mask & *a);
+ *a |= mask;
+ raw_local_irq_restore(flags);
+
+ return res != 0;
+}
+/*
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int
+test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ unsigned short bit = nr & SZLONG_MASK;
+ unsigned long res;
+ volatile unsigned long *a = addr;
+ unsigned long mask;
+ unsigned long flags;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ res = (mask & *a);
+ *a &= ~mask;
+ raw_local_irq_restore(flags);
+
+ return res != 0;
+}
+
+/*
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int
+test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ unsigned short bit = nr & SZLONG_MASK;
+ unsigned long res;
+ volatile unsigned long *a = addr;
+ unsigned long mask;
+ unsigned long flags;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ res = (mask & *a);
+ *a ^= mask;
+ raw_local_irq_restore(flags);
+
+ return res != 0;
+}
+
+#include <asm-generic/bitops/non-atomic.h>
+
+/*
+ * __clear_bit_unlock - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * __clear_bit() is non-atomic and implies release semantics before the
memory
+ * operation. It can be used for an unlock if no other CPUs can
concurrently
+ * modify other bits in the word.
+ */
+static inline void
+__clear_bit_unlock(unsigned long nr, volatile unsigned long *addr)
+{
+ __clear_bit(nr, addr);
+}
+
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/find.h>
+
+#ifdef __KERNEL__
+
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_BITOPS_H */
On Friday 27 March 2009, [email protected] wrote:
> linux/score lastest patch place at
> http://www.sunplusct.com/images/linux-score-patch/linux-score-20090324.patch
>
> diff -uprN -x linux-2.6-git.ori/Documentation/dontdiff
First of all, welcome here and thanks for your first posting of
patches to the Linux kernel. I'll start looking through your
code soon, but would like to give you some generic advices first.
It may be a lot of things to learn at the beginning but you've already
taken the biggest step of coming out to the public with your patches.
It seems that you are not using a specific tool to post your
patches, while we have git and quilt (amongst others) that help
you prepare the patch files for submission.
Most of the points should be listed in Documentation/SubmittingPatches,
including
* specific subject lines in each mail
* threaded mails so that all of them show up together
* line wrapping
* a multiline patch description in each mail
Since the kernel development cycle has entered the merge window
for 2.6.30, you should not expect the architecture to go into
2.6.30 but you have enough time for addressing all review comments
before 2.6.31, as long as you keep posting updates. Specific
comments about code that should be done differently don't mean
that you made a mistake, because any way you do it, you will
get complaints from somebody ;-)
Ideally, you should provide a git tree or a patch set so it
can be included in linux-next at first. Please just ask if you
need help setting up a git server.
Do you have a cross-compiler tool chain for x86 hosts somewhere
for download?
> --- linux-2.6-git.ori/arch/score/include/asm/a.out.h 1970-01-01
> 08:00:00.000000000 +0800
> +++ linux-2.6-git.new/arch/score/include/asm/a.out.h 2009-03-13
> 14:26:33.000000000 +0800
> @@ -0,0 +1,23 @@
> +#ifndef _ASM_A_OUT_H
> +#define _ASM_A_OUT_H
> +
> +struct exec
> +{
> + unsigned long a_info; /* Use macros N_MAGIC, etc for access */
> + unsigned a_text; /* length of text, in bytes */
> + unsigned a_data; /* length of data, in bytes */
> + unsigned a_bss; /* length of uninitialized data area for
> + file, in bytes */
> + unsigned a_syms; /* length of symbol table data in file,
> + in bytes */
> + unsigned a_entry; /* start address */
> + unsigned a_trsize; /* length of relocation info for text, in
> + bytes */
> + unsigned a_drsize; /* length of relocation info for data, in
> bytes */
> +};
> +
> +#define N_TRSIZE(a) ((a).a_trsize)
> +#define N_DRSIZE(a) ((a).a_drsize)
> +#define N_SYMSIZE(a) ((a).a_syms)
> +
> +#endif /* _ASM_A_OUT_H */
New architectures normally don't need a.out support any more, so this
could be left out.
> linux-2.6-git.ori/arch/score/include/asm/atomic.h
> linux-2.6-git.new/arch/score/include/asm/bitops.h
For these files (and many more), I have done a generic version that I
guess I should really post now so that you and the microblaze guys can just
use those files instead of copying new ones.
Arnd <><