2019-11-13 16:53:24

by Ivan Mikhaylov

[permalink] [raw]
Subject: [PATCH 0/2] add inversion signal presence support

Vesnin BMC uses microSD with card presence signal inversion in the
schematics. Change the .get_cd callback to detect 'cd-inverted' option
in dts. There is no WP switch, due to this 'disable-wp' also was added
into vesnin dts for sdhci.

Ivan Mikhaylov (2):
aspeed: dts: add sd card for vesnin
mmc: sdhci-of-aspeed: add inversion signal presence

arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts | 13 ++++++++++++
drivers/mmc/host/sdhci-of-aspeed.c | 23 +++++++++++++++++++++
2 files changed, 36 insertions(+)

--
2.20.1


2019-11-13 18:55:12

by Ivan Mikhaylov

[permalink] [raw]
Subject: [PATCH 1/2] aspeed: dts: add sd card for vesnin

Presence signal is inverted for vesnin boards, 'cd-inverted' added
for invertion signal enablement. Vesnin BMC uses microSD, there is
no WP switch, 'disable-wp' is used for this purpose.

Signed-off-by: Ivan Mikhaylov <[email protected]>

diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
index a27c88d23056..7ae3436e0d99 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
@@ -232,3 +232,16 @@
&wdt2 {
aspeed,alt-boot;
};
+
+&sdmmc {
+ status = "okay";
+};
+
+&sdhci1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd2_default>;
+ cd-inverted;
+ disable-wp;
+};
--
2.20.1

2019-11-13 18:55:42

by Ivan Mikhaylov

[permalink] [raw]
Subject: [PATCH 2/2] mmc: sdhci-of-aspeed: add inversion signal presence

Change the default .get_cd callback. Add inverted signal card detection
check.

Signed-off-by: Ivan Mikhaylov <[email protected]>

diff --git a/drivers/mmc/host/sdhci-of-aspeed.c b/drivers/mmc/host/sdhci-of-aspeed.c
index 8962f6664381..8eded8a6ed8d 100644
--- a/drivers/mmc/host/sdhci-of-aspeed.c
+++ b/drivers/mmc/host/sdhci-of-aspeed.c
@@ -31,6 +31,7 @@ struct aspeed_sdc {
struct aspeed_sdhci {
struct aspeed_sdc *parent;
u32 width_mask;
+ u8 cd_inverted;
};

static void aspeed_sdc_configure_8bit_mode(struct aspeed_sdc *sdc,
@@ -143,6 +144,21 @@ static inline int aspeed_sdhci_calculate_slot(struct aspeed_sdhci *dev,
return (delta / 0x100) - 1;
}

+static int aspeed_get_cd(struct mmc_host *mmc)
+{
+ struct aspeed_sdhci *aspeed_sdhci;
+ struct sdhci_pltfm_host *pltfm_priv;
+ struct sdhci_host *host = mmc_priv(mmc);
+
+ int presence = !!(sdhci_readl(host, SDHCI_PRESENT_STATE)
+ & SDHCI_CARD_PRESENT);
+
+ pltfm_priv = sdhci_priv(host);
+ aspeed_sdhci = sdhci_pltfm_priv(pltfm_priv);
+
+ return presence ^ aspeed_sdhci->cd_inverted;
+}
+
static int aspeed_sdhci_probe(struct platform_device *pdev)
{
struct sdhci_pltfm_host *pltfm_host;
@@ -183,6 +199,13 @@ static int aspeed_sdhci_probe(struct platform_device *pdev)
goto err_pltfm_free;
}

+ dev->cd_inverted = 0;
+ host->mmc_host_ops.get_cd = aspeed_get_cd;
+ if (of_property_read_bool(pdev->dev.of_node, "cd-inverted")) {
+ dev->cd_inverted = 1;
+ dev_info(&pdev->dev, "aspeed: sdhci: presence signal inversion enabled\n");
+ }
+
ret = mmc_of_parse(host->mmc);
if (ret)
goto err_sdhci_add;
--
2.20.1

2019-11-14 00:05:40

by Milton Miller II

[permalink] [raw]
Subject: Re: [PATCH 2/2] mmc: sdhci-of-aspeed: add inversion signal presence

On 11/13/2019 around 09:57AM in some time zone, Ivan Mikhaylov wrote:
>Change the default .get_cd callback. Add inverted signal card
>detection
>check.
>
>Signed-off-by: Ivan Mikhaylov <[email protected]>
>
>diff --git a/drivers/mmc/host/sdhci-of-aspeed.c
>b/drivers/mmc/host/sdhci-of-aspeed.c
>index 8962f6664381..8eded8a6ed8d 100644
>--- a/drivers/mmc/host/sdhci-of-aspeed.c
>+++ b/drivers/mmc/host/sdhci-of-aspeed.c
>@@ -31,6 +31,7 @@ struct aspeed_sdc {
> struct aspeed_sdhci {
> struct aspeed_sdc *parent;
> u32 width_mask;
>+ u8 cd_inverted;

The mmc core/host.c checks the device tree and stores the
result as mmc->caps2 & MMC_CAP2_CD_ACTIVE_HIGH

This appears to be accessale as sdhci_host->mmc->caps2.

Please reuse this bit like the other drivers.

> };
>
> static void aspeed_sdc_configure_8bit_mode(struct aspeed_sdc *sdc,
>@@ -143,6 +144,21 @@ static inline int
>aspeed_sdhci_calculate_slot(struct aspeed_sdhci *dev,
> return (delta / 0x100) - 1;
> }
>
>+static int aspeed_get_cd(struct mmc_host *mmc)
>+{
>+ struct aspeed_sdhci *aspeed_sdhci;
>+ struct sdhci_pltfm_host *pltfm_priv;
>+ struct sdhci_host *host = mmc_priv(mmc);
>+
>+ int presence = !!(sdhci_readl(host, SDHCI_PRESENT_STATE)
>+ & SDHCI_CARD_PRESENT);
>+
>+ pltfm_priv = sdhci_priv(host);
>+ aspeed_sdhci = sdhci_pltfm_priv(pltfm_priv);
>+
>+ return presence ^ aspeed_sdhci->cd_inverted;
>+}
>+
> static int aspeed_sdhci_probe(struct platform_device *pdev)
> {
> struct sdhci_pltfm_host *pltfm_host;
>@@ -183,6 +199,13 @@ static int aspeed_sdhci_probe(struct
>platform_device *pdev)
> goto err_pltfm_free;
> }
>
>+ dev->cd_inverted = 0;
>+ host->mmc_host_ops.get_cd = aspeed_get_cd;
>+ if (of_property_read_bool(pdev->dev.of_node, "cd-inverted")) {
>+ dev->cd_inverted = 1;
>+ dev_info(&pdev->dev, "aspeed: sdhci: presence signal inversion
>enabled\n");
>+ }
>+
> ret = mmc_of_parse(host->mmc);
> if (ret)
> goto err_sdhci_add;
>--
>2.20.1
>
>