Hi Geert,
> -----Original Message-----
> From: Geert Uytterhoeven <[email protected]>
> Sent: 26 November 2020 13:41
> To: Prabhakar <[email protected]>; Magnus Damm <[email protected]>; Rob Herring
> <[email protected]>
> Cc: Biju Das <[email protected]>; [email protected];
> [email protected]; [email protected]; Prabhakar Mahadev Lad <prabhakar.mahadev-
> [email protected]>; Geert Uytterhoeven <[email protected]>
> Subject: [PATCH v4 1/2] ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Separate out ov5640 nodes
>
> From: Lad Prabhakar <[email protected]>
>
> The camera daughter board can also be connected to 8-bit ov7725 sensors,
> so in preparation for configurable option to choose depending on the
> camera's connected separate out the ov5640 nodes in a dtsi file.
>
> Signed-off-by: Lad Prabhakar <[email protected]>
> Reviewed-by: Biju Das <[email protected]>
> [geert: describe a single camera in the .dtsi, include multiple times]
> Signed-off-by: Geert Uytterhoeven <[email protected]>
> ---
> v4:
> - Describe a single camera in the .dtsi file,
> - Include the .dtsi multiple times,
>
> .../boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts | 151 +++++++++---------
> .../r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi | 30 ++++
> 2 files changed, 103 insertions(+), 78 deletions(-)
> create mode 100644 arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
>
That looks much cleaner thank you.
Cheers,
Prabhakar
> diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-
> dbcm-ca.dts
> index 98c3fbd89fa6c5c7..00634eb58ce39da5 100644
> --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
> +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
> @@ -91,67 +91,12 @@ &hscif0 {
> status = "okay";
> };
>
> -&i2c0 {
> - ov5640@3c {
> - compatible = "ovti,ov5640";
> - reg = <0x3c>;
> - clocks = <&mclk_cam1>;
> - clock-names = "xclk";
> -
> - port {
> - ov5640_0: endpoint {
> - bus-width = <8>;
> - data-shift = <2>;
> - bus-type = <6>;
> - pclk-sample = <1>;
> - remote-endpoint = <&vin0ep>;
> - };
> - };
> - };
> -};
> -
> &i2c1 {
> pinctrl-0 = <&i2c1_pins>;
> pinctrl-names = "default";
>
> status = "okay";
> clock-frequency = <400000>;
> -
> - ov5640@3c {
> - compatible = "ovti,ov5640";
> - reg = <0x3c>;
> - clocks = <&mclk_cam2>;
> - clock-names = "xclk";
> -
> - port {
> - ov5640_1: endpoint {
> - bus-width = <8>;
> - data-shift = <2>;
> - bus-type = <6>;
> - pclk-sample = <1>;
> - remote-endpoint = <&vin1ep>;
> - };
> - };
> - };
> -};
> -
> -&i2c2 {
> - ov5640@3c {
> - compatible = "ovti,ov5640";
> - reg = <0x3c>;
> - clocks = <&mclk_cam3>;
> - clock-names = "xclk";
> -
> - port {
> - ov5640_2: endpoint {
> - bus-width = <8>;
> - data-shift = <2>;
> - bus-type = <6>;
> - pclk-sample = <1>;
> - remote-endpoint = <&vin2ep>;
> - };
> - };
> - };
> };
>
> &i2c3 {
> @@ -160,23 +105,6 @@ &i2c3 {
>
> status = "okay";
> clock-frequency = <400000>;
> -
> - ov5640@3c {
> - compatible = "ovti,ov5640";
> - reg = <0x3c>;
> - clocks = <&mclk_cam4>;
> - clock-names = "xclk";
> -
> - port {
> - ov5640_3: endpoint {
> - bus-width = <8>;
> - data-shift = <2>;
> - bus-type = <6>;
> - pclk-sample = <1>;
> - remote-endpoint = <&vin3ep>;
> - };
> - };
> - };
> };
>
> &pfc {
> @@ -267,6 +195,21 @@ &scifb1 {
> cts-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
> };
>
> +/*
> + * Below configuration ties VINx endpoints to ov5640/ov7725 camera endpoints
> + *
> + * Uncomment the #include statements to change configuration
> + */
> +
> +/* 8bit CMOS Camera 1 (J13) */
> +#define CAM_PARENT_I2C i2c0
> +#define MCLK_CAM mclk_cam1
> +#define CAM_EP cam0ep
> +#define VIN_EP vin0ep
> +#undef CAM_ENABLED
> +#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
> +
> +#ifdef CAM_ENABLED
> &vin0 {
> /*
> * Set SW2 switch on the SOM to 'ON'
> @@ -278,13 +221,28 @@ &vin0 {
>
> port {
> vin0ep: endpoint {
> - remote-endpoint = <&ov5640_0>;
> + remote-endpoint = <&cam0ep>;
> bus-width = <8>;
> bus-type = <6>;
> };
> };
> };
> -
> +#endif /* CAM_ENABLED */
> +
> +#undef CAM_PARENT_I2C
> +#undef MCLK_CAM
> +#undef CAM_EP
> +#undef VIN_EP
> +
> +/* 8bit CMOS Camera 2 (J14) */
> +#define CAM_PARENT_I2C i2c1
> +#define MCLK_CAM mclk_cam2
> +#define CAM_EP cam1ep
> +#define VIN_EP vin1ep
> +#undef CAM_ENABLED
> +#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
> +
> +#ifdef CAM_ENABLED
> &vin1 {
> /* Set SW1 switch on the SOM to 'ON' */
> status = "okay";
> @@ -293,13 +251,29 @@ &vin1 {
>
> port {
> vin1ep: endpoint {
> - remote-endpoint = <&ov5640_1>;
> + remote-endpoint = <&cam1ep>;
> bus-width = <8>;
> bus-type = <6>;
> };
> };
> };
>
> +#endif /* CAM_ENABLED */
> +
> +#undef CAM_PARENT_I2C
> +#undef MCLK_CAM
> +#undef CAM_EP
> +#undef VIN_EP
> +
> +/* 8bit CMOS Camera 3 (J12) */
> +#define CAM_PARENT_I2C i2c2
> +#define MCLK_CAM mclk_cam3
> +#define CAM_EP cam2ep
> +#define VIN_EP vin2ep
> +#undef CAM_ENABLED
> +#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
> +
> +#ifdef CAM_ENABLED
> &vin2 {
> status = "okay";
> pinctrl-0 = <&vin2_pins>;
> @@ -307,14 +281,29 @@ &vin2 {
>
> port {
> vin2ep: endpoint {
> - remote-endpoint = <&ov5640_2>;
> + remote-endpoint = <&cam2ep>;
> bus-width = <8>;
> data-shift = <8>;
> bus-type = <6>;
> };
> };
> };
> -
> +#endif /* CAM_ENABLED */
> +
> +#undef CAM_PARENT_I2C
> +#undef MCLK_CAM
> +#undef CAM_EP
> +#undef VIN_EP
> +
> +/* 8bit CMOS Camera 4 (J11) */
> +#define CAM_PARENT_I2C i2c3
> +#define MCLK_CAM mclk_cam4
> +#define CAM_EP cam3ep
> +#define VIN_EP vin3ep
> +#undef CAM_ENABLED
> +#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
> +
> +#ifdef CAM_ENABLED
> &vin3 {
> status = "okay";
> pinctrl-0 = <&vin3_pins>;
> @@ -322,9 +311,15 @@ &vin3 {
>
> port {
> vin3ep: endpoint {
> - remote-endpoint = <&ov5640_3>;
> + remote-endpoint = <&cam3ep>;
> bus-width = <8>;
> bus-type = <6>;
> };
> };
> };
> +#endif /* CAM_ENABLED */
> +
> +#undef CAM_PARENT_I2C
> +#undef MCLK_CAM
> +#undef CAM_EP
> +#undef VIN_EP
> diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi b/arch/arm/boot/dts/r8a7742-
> iwg21d-q7-dbcm-ov5640-single.dtsi
> new file mode 100644
> index 0000000000000000..408016620f5b1a04
> --- /dev/null
> +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
> @@ -0,0 +1,30 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * This include file ties a VIN interface with a single ov5640 sensor on
> + * the iWave-RZ/G1H Qseven board development platform connected with the
> + * camera daughter board.
> + *
> + * Copyright (C) 2020 Renesas Electronics Corp.
> + */
> +
> +#define CAM_ENABLED 1
> +
> +&CAM_PARENT_I2C {
> + ov5640@3c {
> + compatible = "ovti,ov5640";
> + reg = <0x3c>;
> + clocks = <&MCLK_CAM>;
> + clock-names = "xclk";
> + status = "okay";
> +
> + port {
> + CAM_EP: endpoint {
> + bus-width = <8>;
> + data-shift = <2>;
> + bus-type = <6>;
> + pclk-sample = <1>;
> + remote-endpoint = <&VIN_EP>;
> + };
> + };
> + };
> +};
> --
> 2.25.1