Enable diagnostic interrupts for the Fujitsu A64FX.
Register the NMI/IRQ corresponding to the A64FX's device definition
dedicated to diagnostic interrupts, so that when this interrupt is
sent using the BMC, it causes a panic. This can be used to obtain
a kernel dump.
Signed-off-by: Hitomi Hasegawa <[email protected]>
---
MAINTAINERS | 5 +
drivers/soc/Kconfig | 1 +
drivers/soc/Makefile | 1 +
drivers/soc/fujitsu/Kconfig | 13 +++
drivers/soc/fujitsu/Makefile | 3 +
drivers/soc/fujitsu/a64fx-diag.c | 155 +++++++++++++++++++++++++++++++
6 files changed, 178 insertions(+)
create mode 100644 drivers/soc/fujitsu/Kconfig
create mode 100644 drivers/soc/fujitsu/Makefile
create mode 100644 drivers/soc/fujitsu/a64fx-diag.c
diff --git a/MAINTAINERS b/MAINTAINERS
index cd0f68d4a34a..dc35c81ba917 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -241,6 +241,11 @@ F: include/trace/events/9p.h
F: include/uapi/linux/virtio_9p.h
F: net/9p/
+A64FX DIAG DRIVER
+M: Hitomi Hasegawa <[email protected]>
+S: Supported
+F: drivers/soc/fujitsu/a64fx-diag.c
+
A8293 MEDIA DRIVER
M: Antti Palosaari <[email protected]>
L: [email protected]
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index a8562678c437..e10eb27e1e7e 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -9,6 +9,7 @@ source "drivers/soc/atmel/Kconfig"
source "drivers/soc/bcm/Kconfig"
source "drivers/soc/canaan/Kconfig"
source "drivers/soc/fsl/Kconfig"
+source "drivers/soc/fujitsu/Kconfig"
source "drivers/soc/imx/Kconfig"
source "drivers/soc/ixp4xx/Kconfig"
source "drivers/soc/litex/Kconfig"
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index adb30c2d4fea..b12b0b03ad47 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_SOC_CANAAN) += canaan/
obj-$(CONFIG_ARCH_DOVE) += dove/
obj-$(CONFIG_MACH_DOVE) += dove/
obj-y += fsl/
+obj-y += fujitsu/
obj-$(CONFIG_ARCH_GEMINI) += gemini/
obj-y += imx/
obj-y += ixp4xx/
diff --git a/drivers/soc/fujitsu/Kconfig b/drivers/soc/fujitsu/Kconfig
new file mode 100644
index 000000000000..e05c40725922
--- /dev/null
+++ b/drivers/soc/fujitsu/Kconfig
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "fujitsu SoC drivers"
+
+config A64FX_DIAG
+ tristate "A64FX diag driver"
+ depends on ARM64
+ depends on ACPI
+ help
+ Say Y here if you want to enable diag interrupt on Fujitsu A64FX.
+
+ If unsure, say N.
+
+endmenu
diff --git a/drivers/soc/fujitsu/Makefile b/drivers/soc/fujitsu/Makefile
new file mode 100644
index 000000000000..945bc1c14ad0
--- /dev/null
+++ b/drivers/soc/fujitsu/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_A64FX_DIAG) += a64fx-diag.o
diff --git a/drivers/soc/fujitsu/a64fx-diag.c b/drivers/soc/fujitsu/a64fx-diag.c
new file mode 100644
index 000000000000..0776c6de88c2
--- /dev/null
+++ b/drivers/soc/fujitsu/a64fx-diag.c
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * A64FX diag driver.
+ * Copyright (c) 2022 Fujitsu Ltd.
+ */
+
+#include <linux/acpi.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#define A64FX_DIAG_IRQ 1
+#define BMC_DIAG_INTERRUPT_STATUS_OFFSET (0x0044)
+#define BMC_DIAG_INTERRUPT_ENABLE_OFFSET (0x0040)
+#define BMC_DIAG_INTERRUPT_MASK BIT(31)
+
+struct a64fx_diag_priv {
+ int irq;
+ void __iomem *mmsc_reg_base;
+ bool has_nmi;
+};
+
+static irqreturn_t a64fx_diag_handler_nmi(int irq, void *dev_id)
+{
+ nmi_panic(NULL, "a64fx_diag: interrupt received\n");
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t a64fx_diag_handler_irq(int irq, void *dev_id)
+{
+ panic("a64fx_diag: interrupt received\n");
+
+ return IRQ_HANDLED;
+}
+
+static void a64fx_diag_interrupt_clear(struct a64fx_diag_priv *priv)
+{
+ u32 mmsc;
+ void __iomem *diag_status_reg_addr;
+
+ diag_status_reg_addr = priv->mmsc_reg_base + BMC_DIAG_INTERRUPT_STATUS_OFFSET;
+ mmsc = readl(diag_status_reg_addr);
+ if (mmsc & BMC_DIAG_INTERRUPT_MASK)
+ writel(BMC_DIAG_INTERRUPT_MASK, diag_status_reg_addr);
+}
+
+static void a64fx_diag_interrupt_enable(struct a64fx_diag_priv *priv)
+{
+ u32 mmsc;
+ void __iomem *diag_enable_reg_addr;
+
+ diag_enable_reg_addr = priv->mmsc_reg_base + BMC_DIAG_INTERRUPT_ENABLE_OFFSET;
+ mmsc = readl(diag_enable_reg_addr);
+ if (!(mmsc & BMC_DIAG_INTERRUPT_MASK)) {
+ mmsc |= BMC_DIAG_INTERRUPT_MASK;
+ writel(mmsc, diag_enable_reg_addr);
+ }
+}
+
+static void a64fx_diag_interrupt_disable(struct a64fx_diag_priv *priv)
+{
+ u32 mmsc;
+ void __iomem *diag_enable_reg_addr;
+
+ diag_enable_reg_addr = priv->mmsc_reg_base + BMC_DIAG_INTERRUPT_ENABLE_OFFSET;
+ mmsc = readl(diag_enable_reg_addr);
+ if (mmsc & BMC_DIAG_INTERRUPT_MASK) {
+ mmsc &= ~BMC_DIAG_INTERRUPT_MASK;
+ writel(mmsc, diag_enable_reg_addr);
+ }
+}
+
+static int a64fx_diag_probe(struct platform_device *pdev)
+{
+ int ret;
+ unsigned long irq_flags;
+ struct device *dev = &pdev->dev;
+ struct a64fx_diag_priv *priv;
+
+ priv = devm_kzalloc(dev, sizeof(struct a64fx_diag_priv), GFP_KERNEL);
+ if (priv == NULL)
+ return -ENOMEM;
+
+ priv->mmsc_reg_base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->mmsc_reg_base))
+ return PTR_ERR(priv->mmsc_reg_base);
+
+ priv->irq = platform_get_irq(pdev, A64FX_DIAG_IRQ);
+ if (priv->irq < 0)
+ return priv->irq;
+
+ platform_set_drvdata(pdev, priv);
+
+ a64fx_diag_interrupt_clear(priv);
+ a64fx_diag_interrupt_enable(priv);
+
+ irq_flags = IRQF_PERCPU | IRQF_NOBALANCING | IRQF_NO_AUTOEN |
+ IRQF_NO_THREAD;
+ ret = request_nmi(priv->irq, &a64fx_diag_handler_nmi, irq_flags,
+ "a64fx_diag_nmi", NULL);
+ if (ret) {
+ ret = request_irq(priv->irq, &a64fx_diag_handler_irq,
+ irq_flags, "a64fx_diag_irq", NULL);
+ if (ret) {
+ dev_err(dev, "cannot register IRQ %d\n", ret);
+ return ret;
+ }
+ enable_irq(priv->irq);
+ priv->has_nmi = false;
+ } else {
+ enable_nmi(priv->irq);
+ priv->has_nmi = true;
+ }
+
+ return 0;
+}
+
+static int __exit a64fx_diag_remove(struct platform_device *pdev)
+{
+ struct a64fx_diag_priv *priv = platform_get_drvdata(pdev);
+
+ a64fx_diag_interrupt_disable(priv);
+ a64fx_diag_interrupt_clear(priv);
+
+ if (priv->has_nmi)
+ free_nmi(priv->irq, NULL);
+ else
+ free_irq(priv->irq, NULL);
+
+ return 0;
+}
+
+static const struct acpi_device_id a64fx_diag_acpi_match[] = {
+ { "FUJI2007", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, a64fx_diag_acpi_match);
+
+
+static struct platform_driver a64fx_diag_driver = {
+ .driver = {
+ .name = "a64fx_diag_driver",
+ .acpi_match_table = ACPI_PTR(a64fx_diag_acpi_match),
+ },
+ .probe = a64fx_diag_probe,
+ .remove = a64fx_diag_remove,
+};
+
+module_platform_driver(a64fx_diag_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Hitomi Hasegawa <[email protected]>");
+MODULE_DESCRIPTION("A64FX diag driver");
--
2.27.0
On Wed, May 11, 2022 at 8:50 AM Greg KH <[email protected]> wrote:
> > --- a/drivers/soc/Makefile
> > +++ b/drivers/soc/Makefile
> > @@ -12,6 +12,7 @@ obj-$(CONFIG_SOC_CANAAN) += canaan/
> > obj-$(CONFIG_ARCH_DOVE) += dove/
> > obj-$(CONFIG_MACH_DOVE) += dove/
> > obj-y += fsl/
> > +obj-y += fujitsu/
>
> Why a sub directory for just one .c file?
All the other drivers/soc/ contents are in subdirectories, so I think
I'd keep it like this.
There are also other drivers that have been proposed for fujitsu a64fx.
Arnd
Hi Greg,
> > +obj-y += fujitsu/
>
> Why a sub directory for just one .c file?
As Arnd mentioned, I placed the sub directory following the convention
of drivers/soc.
> > + help
> > + Say Y here if you want to enable diag interrupt on Fujitsu A64FX.
> > +
> > + If unsure, say N.
>
> You need to provide more information about what this driver does and what it is
> here.
OK, I will add a description.
Thank you.
Hitomi Hasegawa