pci1xxxx is a PCIe switch with a multi-function endpoint on one of its
downstream ports. Quad-uart is one of the functions in the multi-function
endpoint. This patch adds device driver for the quad-uart function and
enumerates between 1 to 4 instances of uarts based on the PCIe subsystem
device ID.
The changes from v1->v2->v3->v4->v5->v6->v7->v8 are mentioned in each patch
in the patchset.
Thanks to Andy Shevchenko, Ilpo Jarvinen, Chritophe JAILLET, Geert
Uytterhoeven, Greg KH for their review comments.
Kumaravel Thiagarajan (4):
serial: 8250_pci: Add serial8250_pci_setup_port definition in
8250_pcilib.c
serial: 8250_pci1xxxx: Add driver for quad-uart support
serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver
serial: 8250_pci1xxxx: Add power management functions to quad-uart
driver
MAINTAINERS | 7 +
drivers/tty/serial/8250/8250_pci.c | 25 +-
drivers/tty/serial/8250/8250_pci1xxxx.c | 502 ++++++++++++++++++++++++
drivers/tty/serial/8250/8250_pcilib.c | 38 ++
drivers/tty/serial/8250/8250_pcilib.h | 15 +
drivers/tty/serial/8250/8250_port.c | 8 +
drivers/tty/serial/8250/Kconfig | 15 +
drivers/tty/serial/8250/Makefile | 2 +
include/uapi/linux/serial_core.h | 3 +
9 files changed, 593 insertions(+), 22 deletions(-)
create mode 100644 drivers/tty/serial/8250/8250_pci1xxxx.c
create mode 100644 drivers/tty/serial/8250/8250_pcilib.c
create mode 100644 drivers/tty/serial/8250/8250_pcilib.h
--
2.25.1
Move implementation of setup_port func() to serial8250_pci_setup_port.
Co-developed-by: Tharun Kumar P <[email protected]>
Signed-off-by: Tharun Kumar P <[email protected]>
Signed-off-by: Kumaravel Thiagarajan <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
---
Changes in v8:
- Moved SERIAL_8250_PCILIB above 8250_PCI
Changes in v7:
- Used namespace 'SERIAL_8250_PCI' while exporting and importing symbols
- Included structures used in function declaration in 8250_pcilib.h file
Changes in v6:
- Made this patch first patch of the patch series
Changes in v5:
- This is the new patch added in v5 version of this patchset
- Moved implementation of setup_port from 8250_pci.c to 8250_pcilib.c
---
drivers/tty/serial/8250/8250_pci.c | 25 +++---------------
drivers/tty/serial/8250/8250_pcilib.c | 38 +++++++++++++++++++++++++++
drivers/tty/serial/8250/8250_pcilib.h | 15 +++++++++++
drivers/tty/serial/8250/Kconfig | 4 +++
drivers/tty/serial/8250/Makefile | 1 +
5 files changed, 61 insertions(+), 22 deletions(-)
create mode 100644 drivers/tty/serial/8250/8250_pcilib.c
create mode 100644 drivers/tty/serial/8250/8250_pcilib.h
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 6f66dc2ebacc..58cc9e19bd20 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -24,6 +24,7 @@
#include <asm/io.h>
#include "8250.h"
+#include "8250_pcilib.h"
/*
* init function returns:
@@ -89,28 +90,7 @@ static int
setup_port(struct serial_private *priv, struct uart_8250_port *port,
u8 bar, unsigned int offset, int regshift)
{
- struct pci_dev *dev = priv->dev;
-
- if (bar >= PCI_STD_NUM_BARS)
- return -EINVAL;
-
- if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) {
- if (!pcim_iomap(dev, bar, 0) && !pcim_iomap_table(dev))
- return -ENOMEM;
-
- port->port.iotype = UPIO_MEM;
- port->port.iobase = 0;
- port->port.mapbase = pci_resource_start(dev, bar) + offset;
- port->port.membase = pcim_iomap_table(dev)[bar] + offset;
- port->port.regshift = regshift;
- } else {
- port->port.iotype = UPIO_PORT;
- port->port.iobase = pci_resource_start(dev, bar) + offset;
- port->port.mapbase = 0;
- port->port.membase = NULL;
- port->port.regshift = 0;
- }
- return 0;
+ return serial8250_pci_setup_port(priv->dev, port, bar, offset, regshift);
}
/*
@@ -5759,3 +5739,4 @@ module_pci_driver(serial_pci_driver);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module");
MODULE_DEVICE_TABLE(pci, serial_pci_tbl);
+MODULE_IMPORT_NS(SERIAL_8250_PCI);
diff --git a/drivers/tty/serial/8250/8250_pcilib.c b/drivers/tty/serial/8250/8250_pcilib.c
new file mode 100644
index 000000000000..090385172a09
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_pcilib.c
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * 8250 PCI library.
+ *
+ * Copyright (C) 2001 Russell King, All Rights Reserved.
+ */
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+
+#include "8250.h"
+
+int serial8250_pci_setup_port(struct pci_dev *dev, struct uart_8250_port *port,
+ u8 bar, unsigned int offset, int regshift)
+{
+ if (bar >= PCI_STD_NUM_BARS)
+ return -EINVAL;
+
+ if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) {
+ if (!pcim_iomap(dev, bar, 0) && !pcim_iomap_table(dev))
+ return -ENOMEM;
+
+ port->port.iotype = UPIO_MEM;
+ port->port.iobase = 0;
+ port->port.mapbase = pci_resource_start(dev, bar) + offset;
+ port->port.membase = pcim_iomap_table(dev)[bar] + offset;
+ port->port.regshift = regshift;
+ } else {
+ port->port.iotype = UPIO_PORT;
+ port->port.iobase = pci_resource_start(dev, bar) + offset;
+ port->port.mapbase = 0;
+ port->port.membase = NULL;
+ port->port.regshift = 0;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_NS_GPL(serial8250_pci_setup_port, SERIAL_8250_PCI);
diff --git a/drivers/tty/serial/8250/8250_pcilib.h b/drivers/tty/serial/8250/8250_pcilib.h
new file mode 100644
index 000000000000..1aaf1b50ce9c
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_pcilib.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * 8250 PCI library header file.
+ *
+ * Copyright (C) 2001 Russell King, All Rights Reserved.
+ */
+
+#include <linux/types.h>
+
+struct pci_dev;
+
+struct uart_8250_port;
+
+int serial8250_pci_setup_port(struct pci_dev *dev, struct uart_8250_port *port, u8 bar,
+ unsigned int offset, int regshift);
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index d0b49e15fbf5..768b73d5cb9a 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -129,9 +129,13 @@ config SERIAL_8250_DMA
This builds DMA support that can be used with 8250/16650
compatible UART controllers that support DMA signaling.
+config SERIAL_8250_PCILIB
+ bool
+
config SERIAL_8250_PCI
tristate "8250/16550 PCI device support"
depends on SERIAL_8250 && PCI
+ select SERIAL_8250_PCILIB
default SERIAL_8250
help
This builds standard PCI serial support. You may be able to
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index bee908f99ea0..b9179d1f104b 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_SERIAL_8250) += 8250.o 8250_base.o
8250_base-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o
8250_base-$(CONFIG_SERIAL_8250_DWLIB) += 8250_dwlib.o
8250_base-$(CONFIG_SERIAL_8250_FINTEK) += 8250_fintek.o
+8250_base-$(CONFIG_SERIAL_8250_PCILIB) += 8250_pcilib.o
obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o
obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o
obj-$(CONFIG_SERIAL_8250_EXAR) += 8250_exar.o
--
2.25.1
pci1xxxx is a PCIe switch with a multi-function endpoint on one of
its downstream ports. Quad-uart is one of the functions in the
multi-function endpoint. This driver loads for the quad-uart and
enumerates single or multiple instances of uart based on the PCIe
subsystem device ID.
Co-developed-by: Tharun Kumar P <[email protected]>
Signed-off-by: Tharun Kumar P <[email protected]>
Signed-off-by: Kumaravel Thiagarajan <[email protected]>
---
Changes in v8:
- Requested only required number of interrupt vectors in pci_alloc_irq_vectors
API based on sub-device id
Changes in v7:
- Used appropriate error codes
- Moved logical_to_physical_port_idx array to a function
Changes in v6:
- Removed un-necessary paranthesis
- Used array and removed switch cases to reduce complexity
- Handled failure case of pcim_iomap
Changes in v5:
- Used tabs instead of spaces in MACRO definitions for readability
- Removed assignments that are not required
- Removed redundant blank lines
Changes in v4:
- Renamed pci_setup_port to serial8250_pci_setup_port
- Added Copyright information to 8250_pcilib.c
Changes in v3:
- Used NSEC_PER_SEC, HZ_PER_MHZ, FIELD_PREP, FIELD_GET MACROs wherever
necessary
- Handled failure case of serial8250_register_8250_port properly
- Moved pci_setup_port to 8250_pcilib.c
Changes in v2:
- Use only the 62.5 MHz for baud clock.
- Define custom implementation for get_divisor and set_divisor.
- Use BOTHER instead of UPF_SPD_CUST for non standard baud rates
(untested).
- Correct indentation in clock divisor computation.
- Remove unnecessary call to pci_save_state in probe function.
- Fix null pointer dereference in probe function.
- Move pci1xxxx_rs485_config to a separate patch.
- Depends on SERIAL_8250_PCI & default to SERIAL_8250.
- Change PORT_MCHP16550A to 100 from 124.
---
MAINTAINERS | 7 +
drivers/tty/serial/8250/8250_pci1xxxx.c | 337 ++++++++++++++++++++++++
drivers/tty/serial/8250/8250_port.c | 8 +
drivers/tty/serial/8250/Kconfig | 11 +
drivers/tty/serial/8250/Makefile | 1 +
include/uapi/linux/serial_core.h | 3 +
6 files changed, 367 insertions(+)
create mode 100644 drivers/tty/serial/8250/8250_pci1xxxx.c
diff --git a/MAINTAINERS b/MAINTAINERS
index d30f26e07cd3..aa98deaba249 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13434,6 +13434,13 @@ F: Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
F: drivers/nvmem/microchip-otpc.c
F: include/dt-bindings/nvmem/microchip,sama7g5-otpc.h
+MICROCHIP PCIe UART DRIVER
+M: Kumaravel Thiagarajan <[email protected]>
+M: Tharun Kumar P <[email protected]>
+L: [email protected]
+S: Maintained
+F: drivers/tty/serial/8250/8250_pci1xxxx.c
+
MICROCHIP PWM DRIVER
M: Claudiu Beznea <[email protected]>
L: [email protected] (moderated for non-subscribers)
diff --git a/drivers/tty/serial/8250/8250_pci1xxxx.c b/drivers/tty/serial/8250/8250_pci1xxxx.c
new file mode 100644
index 000000000000..05d1bd386f07
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_pci1xxxx.c
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Probe module for 8250/16550-type MCHP PCI serial ports.
+ *
+ * Based on drivers/tty/serial/8250/8250_pci.c,
+ *
+ * Copyright (C) 2022 Microchip Technology Inc., All Rights Reserved.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/serial_core.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/units.h>
+#include <linux/tty.h>
+
+#include <asm/byteorder.h>
+
+#include "8250.h"
+#include "8250_pcilib.h"
+
+#define PCI_DEVICE_ID_EFAR_PCI12000 0xa002
+#define PCI_DEVICE_ID_EFAR_PCI11010 0xa012
+#define PCI_DEVICE_ID_EFAR_PCI11101 0xa022
+#define PCI_DEVICE_ID_EFAR_PCI11400 0xa032
+#define PCI_DEVICE_ID_EFAR_PCI11414 0xa042
+
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_4p 0x0001
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p012 0x0002
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p013 0x0003
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p023 0x0004
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p123 0x0005
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p01 0x0006
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p02 0x0007
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p03 0x0008
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p12 0x0009
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p13 0x000a
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p23 0x000b
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p0 0x000c
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p1 0x000d
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p2 0x000e
+#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p3 0x000f
+
+#define PCI_SUBDEVICE_ID_EFAR_PCI12000 PCI_DEVICE_ID_EFAR_PCI12000
+#define PCI_SUBDEVICE_ID_EFAR_PCI11010 PCI_DEVICE_ID_EFAR_PCI11010
+#define PCI_SUBDEVICE_ID_EFAR_PCI11101 PCI_DEVICE_ID_EFAR_PCI11101
+#define PCI_SUBDEVICE_ID_EFAR_PCI11400 PCI_DEVICE_ID_EFAR_PCI11400
+#define PCI_SUBDEVICE_ID_EFAR_PCI11414 PCI_DEVICE_ID_EFAR_PCI11414
+
+#define UART_ACTV_REG 0x11
+#define UART_BLOCK_SET_ACTIVE BIT(0)
+
+#define UART_PCI_CTRL_REG 0x80
+#define UART_PCI_CTRL_SET_MULTIPLE_MSI BIT(4)
+#define UART_PCI_CTRL_D3_CLK_ENABLE BIT(0)
+
+#define ADCL_CFG_REG 0x40
+#define ADCL_CFG_POL_SEL BIT(2)
+#define ADCL_CFG_PIN_SEL BIT(1)
+#define ADCL_CFG_EN BIT(0)
+
+#define UART_BIT_SAMPLE_CNT 16
+#define BAUD_CLOCK_DIV_INT_MSK GENMASK(31, 8)
+#define ADCL_CFG_RTS_DELAY_MASK GENMASK(11, 8)
+#define UART_CLOCK_DEFAULT (62500 * HZ_PER_KHZ)
+
+#define UART_WAKE_REG 0x8C
+#define UART_WAKE_MASK_REG 0x90
+#define UART_WAKE_N_PIN BIT(2)
+#define UART_WAKE_NCTS BIT(1)
+#define UART_WAKE_INT BIT(0)
+#define UART_WAKE_SRCS \
+ (UART_WAKE_N_PIN | UART_WAKE_NCTS | UART_WAKE_INT)
+
+#define UART_BAUD_CLK_DIVISOR_REG 0x54
+
+#define UART_RESET_REG 0x94
+#define UART_RESET_D3_RESET_DISABLE BIT(16)
+
+#define MAX_PORTS 4
+
+struct pci1xxxx_8250 {
+ struct pci_dev *pdev;
+ unsigned int nr;
+ void __iomem *membase;
+ int line[];
+};
+
+static int pci1xxxx_get_num_ports(struct pci_dev *dev)
+{
+ switch (dev->subsystem_device) {
+ case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p0:
+ case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p1:
+ case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p2:
+ case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p3:
+ case PCI_SUBDEVICE_ID_EFAR_PCI12000:
+ case PCI_SUBDEVICE_ID_EFAR_PCI11010:
+ case PCI_SUBDEVICE_ID_EFAR_PCI11101:
+ case PCI_SUBDEVICE_ID_EFAR_PCI11400:
+ default:
+ return 1;
+ case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p01:
+ case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p02:
+ case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p03:
+ case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p12:
+ case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p13:
+ case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p23:
+ return 2;
+ case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p012:
+ case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p123:
+ case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p013:
+ case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p023:
+ return 3;
+ case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_4p:
+ case PCI_SUBDEVICE_ID_EFAR_PCI11414:
+ return 4;
+ }
+}
+
+static unsigned int pci1xxxx_get_divisor(struct uart_port *port,
+ unsigned int baud, unsigned int *frac)
+{
+ unsigned int quot;
+
+ /*
+ * Calculate baud rate sampling period in nanoseconds.
+ * Fractional part x denotes x/255 parts of a nanosecond.
+ */
+ quot = NSEC_PER_SEC / (baud * UART_BIT_SAMPLE_CNT);
+ *frac = (NSEC_PER_SEC - quot * baud * UART_BIT_SAMPLE_CNT) *
+ 255 / UART_BIT_SAMPLE_CNT / baud;
+
+ return quot;
+}
+
+static void pci1xxxx_set_divisor(struct uart_port *port, unsigned int baud,
+ unsigned int quot, unsigned int frac)
+{
+ writel(FIELD_PREP(BAUD_CLOCK_DIV_INT_MSK, quot) | frac,
+ port->membase + UART_BAUD_CLK_DIVISOR_REG);
+}
+
+static int pci1xxxx_setup(struct pci1xxxx_8250 *priv,
+ struct uart_8250_port *port, int port_idx)
+{
+ int ret;
+
+ port->port.flags |= UPF_FIXED_TYPE | UPF_SKIP_TEST;
+ port->port.type = PORT_MCHP16550A;
+ port->port.set_termios = serial8250_do_set_termios;
+ port->port.get_divisor = pci1xxxx_get_divisor;
+ port->port.set_divisor = pci1xxxx_set_divisor;
+
+ ret = serial8250_pci_setup_port(priv->pdev, port, 0, port_idx * 256, 0);
+ if (ret < 0)
+ return ret;
+
+ writeb(UART_BLOCK_SET_ACTIVE, port->port.membase + UART_ACTV_REG);
+ writeb(UART_WAKE_SRCS, port->port.membase + UART_WAKE_REG);
+ writeb(UART_WAKE_N_PIN, port->port.membase + UART_WAKE_MASK_REG);
+
+ return 0;
+}
+
+static int pci1xxxx_get_max_port(int subsys_dev)
+{
+ static int max_port[] = {
+ 1,/* PCI12000 PCI11010 PCI11101 PCI11400 */
+ 4,/* PCI4p */
+ 3,/* PCI3p012 */
+ 4,/* PCI3p013 */
+ 4,/* PCI3p023 */
+ 4,/* PCI3p123 */
+ 2,/* PCI2p01 */
+ 3,/* PCI2p02 */
+ 4,/* PCI2p03 */
+ 3,/* PCI2p12 */
+ 4,/* PCI2p13 */
+ 4,/* PCI2p23 */
+ 1,/* PCI1p0 */
+ 2,/* PCI1p1 */
+ 3,/* PCI1p2 */
+ 4,/* PCI1p3 */
+ };
+
+ if (subsys_dev > PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p3)
+ if (subsys_dev != PCI_SUBDEVICE_ID_EFAR_PCI11414)
+ return max_port[0];
+ else
+ return 4;
+ else
+ return max_port[subsys_dev];
+
+}
+
+static int pci1xxxx_logical_to_physical_port_translate(int subsys_dev, int port)
+{
+ static int logical_to_physical_port_idx[][MAX_PORTS] = {
+ {0, 1, 2, 3},/* PCI12000 PCI11010 PCI11101 PCI11400 PCI11414 */
+ {0, 1, 2, 3},/* PCI4p */
+ {0, 1, 2, -1},/* PCI3p012 */
+ {0, 1, 3, -1},/* PCI3p013 */
+ {0, 2, 3, -1},/* PCI3p023 */
+ {1, 2, 3, -1},/* PCI3p123 */
+ {0, 1, -1, -1},/* PCI2p01 */
+ {0, 2, -1, -1},/* PCI2p02 */
+ {0, 3, -1, -1},/* PCI2p03 */
+ {1, 2, -1, -1},/* PCI2p12 */
+ {1, 3, -1, -1},/* PCI2p13 */
+ {2, 3, -1, -1},/* PCI2p23 */
+ {0, -1, -1, -1},/* PCI1p0 */
+ {1, -1, -1, -1},/* PCI1p1 */
+ {2, -1, -1, -1},/* PCI1p2 */
+ {3, -1, -1, -1},/* PCI1p3 */
+ };
+
+ if (subsys_dev > PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p3)
+ return logical_to_physical_port_idx[0][port];
+ else
+ return logical_to_physical_port_idx[subsys_dev][port];
+}
+
+static int pci1xxxx_serial_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct device *dev = &pdev->dev;
+ struct pci1xxxx_8250 *priv;
+ struct uart_8250_port uart;
+ unsigned int nr_ports, i;
+ int max_vec_reqd;
+ int num_vectors;
+ int subsys_dev;
+ int port_idx;
+ int rc;
+
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ nr_ports = pci1xxxx_get_num_ports(pdev);
+
+ priv = devm_kzalloc(dev, struct_size(priv, line, nr_ports), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->membase = pcim_iomap(pdev, 0, 0);
+ if (!priv->membase)
+ return -ENOMEM;
+
+ priv->pdev = pdev;
+ subsys_dev = priv->pdev->subsystem_device;
+ priv->nr = nr_ports;
+ pci_set_master(pdev);
+ max_vec_reqd = pci1xxxx_get_max_port(subsys_dev);
+ num_vectors = pci_alloc_irq_vectors(pdev, 1, max_vec_reqd,
+ PCI_IRQ_ALL_TYPES);
+ if (num_vectors < 0)
+ return num_vectors;
+
+ memset(&uart, 0, sizeof(uart));
+ uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT;
+ uart.port.uartclk = UART_CLOCK_DEFAULT;
+ uart.port.dev = dev;
+
+ if (num_vectors == max_vec_reqd)
+ writeb(UART_PCI_CTRL_SET_MULTIPLE_MSI,
+ priv->membase + UART_PCI_CTRL_REG);
+
+ for (i = 0; i < nr_ports; i++)
+ priv->line[i] = -ENODEV;
+
+ for (i = 0; i < nr_ports; i++) {
+ port_idx = pci1xxxx_logical_to_physical_port_translate(subsys_dev, i);
+
+ if (num_vectors == max_vec_reqd)
+ uart.port.irq = pci_irq_vector(priv->pdev, port_idx);
+ else
+ uart.port.irq = pci_irq_vector(pdev, 0);
+
+ rc = pci1xxxx_setup(priv, &uart, port_idx);
+ if (rc) {
+ dev_warn(dev, "Failed to setup port %u\n", i);
+ continue;
+ }
+
+ priv->line[i] = serial8250_register_8250_port(&uart);
+ if (priv->line[i] < 0) {
+ dev_warn(dev,
+ "Couldn't register serial port %lx, irq %d, type %d, error %d\n",
+ uart.port.iobase, uart.port.irq, uart.port.iotype,
+ priv->line[i]);
+ }
+ }
+
+ pci_set_drvdata(pdev, priv);
+
+ return 0;
+}
+
+static void pci1xxxx_serial_remove(struct pci_dev *dev)
+{
+ struct pci1xxxx_8250 *priv = pci_get_drvdata(dev);
+ int i;
+
+ for (i = 0; i < priv->nr; i++) {
+ if (priv->line[i] >= 0)
+ serial8250_unregister_port(priv->line[i]);
+ }
+}
+
+static const struct pci_device_id pci1xxxx_pci_tbl[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_PCI11010) },
+ { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_PCI11101) },
+ { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_PCI11400) },
+ { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_PCI11414) },
+ { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_PCI12000) },
+ {}
+};
+MODULE_DEVICE_TABLE(pci, pci1xxxx_pci_tbl);
+
+static struct pci_driver pci1xxxx_pci_driver = {
+ .name = "pci1xxxx serial",
+ .probe = pci1xxxx_serial_probe,
+ .remove = pci1xxxx_serial_remove,
+ .id_table = pci1xxxx_pci_tbl,
+};
+module_pci_driver(pci1xxxx_pci_driver);
+
+MODULE_DESCRIPTION("Microchip Technology Inc. PCIe to UART module");
+MODULE_AUTHOR("Kumaravel Thiagarajan <[email protected]>");
+MODULE_AUTHOR("Tharun Kumar P <[email protected]>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 1d2a43214b48..ec2fe5fd7b02 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -313,6 +313,14 @@ static const struct serial8250_config uart_config[] = {
.rxtrig_bytes = {1, 4, 8, 14},
.flags = UART_CAP_FIFO,
},
+ [PORT_MCHP16550A] = {
+ .name = "MCHP16550A",
+ .fifo_size = 256,
+ .tx_loadsz = 256,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01,
+ .rxtrig_bytes = {2, 66, 130, 194},
+ .flags = UART_CAP_FIFO,
+ },
};
/* Uart divisor latch read */
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 768b73d5cb9a..588a73c0f4e8 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -295,6 +295,17 @@ config SERIAL_8250_HUB6
To compile this driver as a module, choose M here: the module
will be called 8250_hub6.
+config SERIAL_8250_PCI1XXXX
+ tristate "Microchip 8250 based serial port"
+ depends on SERIAL_8250 && PCI
+ select SERIAL_8250_PCILIB
+ default SERIAL_8250
+ help
+ Select this option if you have a setup with Microchip PCIe
+ Switch with serial port enabled and wish to enable 8250
+ serial driver for the serial interface. This driver support
+ will ensure to support baud rates upto 1.5Mpbs.
+
#
# Misc. options/drivers.
#
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index b9179d1f104b..98202fdf39f8 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o
obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o
obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
+obj-$(CONFIG_SERIAL_8250_PCI1XXXX) += 8250_pci1xxxx.o
obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o
obj-$(CONFIG_SERIAL_8250_MEN_MCB) += 8250_men_mcb.o
obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 3ba34d8378bd..281fa286555c 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -207,6 +207,9 @@
/* Atheros AR933X SoC */
#define PORT_AR933X 99
+/* MCHP 16550A UART with 256 byte FIFOs */
+#define PORT_MCHP16550A 100
+
/* ARC (Synopsys) on-chip UART */
#define PORT_ARC 101
--
2.25.1
pci1xxxx uart supports RS485 mode of operation in the hardware with
auto-direction control with configurable delay for releasing RTS after
the transmission. This patch adds support for the RS485 mode.
Co-developed-by: Tharun Kumar P <[email protected]>
Signed-off-by: Tharun Kumar P <[email protected]>
Signed-off-by: Kumaravel Thiagarajan <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
---
Changes in v8:
- Modified datatype of delay_in_baud_periods to u32
Changes in v7:
- No Change
Changes in v6:
- Modified datatype of delay_in_baud_periods to u64 to avoid overflows
Changes in v5:
- Removed unnecessary assignments
- Corrected styling issues in comments
Changes in v4:
- No Change
Changes in v3:
- Remove flags sanitization in driver which is taken care in core
Changes in v2:
- move pci1xxxx_rs485_config to a separate patch with
pci1xxxx_rs485_supported.
---
drivers/tty/serial/8250/8250_pci1xxxx.c | 50 +++++++++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/drivers/tty/serial/8250/8250_pci1xxxx.c b/drivers/tty/serial/8250/8250_pci1xxxx.c
index 05d1bd386f07..c4e44bfbd9e2 100644
--- a/drivers/tty/serial/8250/8250_pci1xxxx.c
+++ b/drivers/tty/serial/8250/8250_pci1xxxx.c
@@ -145,6 +145,54 @@ static void pci1xxxx_set_divisor(struct uart_port *port, unsigned int baud,
port->membase + UART_BAUD_CLK_DIVISOR_REG);
}
+static int pci1xxxx_rs485_config(struct uart_port *port,
+ struct ktermios *termios,
+ struct serial_rs485 *rs485)
+{
+ u32 delay_in_baud_periods;
+ u32 baud_period_in_ns;
+ u32 mode_cfg = 0;
+ u32 clock_div;
+
+ /*
+ * pci1xxxx's uart hardware supports only RTS delay after
+ * Tx and in units of bit times to a maximum of 15
+ */
+ if (rs485->flags & SER_RS485_ENABLED) {
+ mode_cfg = ADCL_CFG_EN | ADCL_CFG_PIN_SEL;
+
+ if (!(rs485->flags & SER_RS485_RTS_ON_SEND))
+ mode_cfg |= ADCL_CFG_POL_SEL;
+
+ if (rs485->delay_rts_after_send) {
+ clock_div = readl(port->membase + UART_BAUD_CLK_DIVISOR_REG);
+ baud_period_in_ns =
+ FIELD_GET(BAUD_CLOCK_DIV_INT_MSK, clock_div) *
+ UART_BIT_SAMPLE_CNT;
+ delay_in_baud_periods =
+ rs485->delay_rts_after_send * NSEC_PER_MSEC /
+ baud_period_in_ns;
+ delay_in_baud_periods =
+ min_t(u32, delay_in_baud_periods,
+ FIELD_MAX(ADCL_CFG_RTS_DELAY_MASK));
+ mode_cfg |= FIELD_PREP(ADCL_CFG_RTS_DELAY_MASK,
+ delay_in_baud_periods);
+ rs485->delay_rts_after_send =
+ baud_period_in_ns * delay_in_baud_periods /
+ NSEC_PER_MSEC;
+ }
+ }
+ writel(mode_cfg, port->membase + ADCL_CFG_REG);
+ return 0;
+}
+
+static const struct serial_rs485 pci1xxxx_rs485_supported = {
+ .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND |
+ SER_RS485_RTS_AFTER_SEND,
+ .delay_rts_after_send = 1,
+ /* Delay RTS before send is not supported */
+};
+
static int pci1xxxx_setup(struct pci1xxxx_8250 *priv,
struct uart_8250_port *port, int port_idx)
{
@@ -155,6 +203,8 @@ static int pci1xxxx_setup(struct pci1xxxx_8250 *priv,
port->port.set_termios = serial8250_do_set_termios;
port->port.get_divisor = pci1xxxx_get_divisor;
port->port.set_divisor = pci1xxxx_set_divisor;
+ port->port.rs485_config = pci1xxxx_rs485_config;
+ port->port.rs485_supported = pci1xxxx_rs485_supported;
ret = serial8250_pci_setup_port(priv->pdev, port, 0, port_idx * 256, 0);
if (ret < 0)
--
2.25.1
On Sun, Dec 11, 2022 at 07:17:28AM +0530, Kumaravel Thiagarajan wrote:
> pci1xxxx is a PCIe switch with a multi-function endpoint on one of
> its downstream ports. Quad-uart is one of the functions in the
> multi-function endpoint. This driver loads for the quad-uart and
> enumerates single or multiple instances of uart based on the PCIe
> subsystem device ID.
...
> +static int pci1xxxx_get_max_port(int subsys_dev)
> +{
> + static int max_port[] = {
> + 1,/* PCI12000 PCI11010 PCI11101 PCI11400 */
I would put the commas in between in the comment, or is it the name of a single
product?
> + 4,/* PCI4p */
> + 3,/* PCI3p012 */
> + 4,/* PCI3p013 */
> + 4,/* PCI3p023 */
> + 4,/* PCI3p123 */
> + 2,/* PCI2p01 */
> + 3,/* PCI2p02 */
> + 4,/* PCI2p03 */
> + 3,/* PCI2p12 */
> + 4,/* PCI2p13 */
> + 4,/* PCI2p23 */
> + 1,/* PCI1p0 */
> + 2,/* PCI1p1 */
> + 3,/* PCI1p2 */
> + 4,/* PCI1p3 */
> + };
If you move this outside of the function you may use static_assert(), see below
why.
> + if (subsys_dev > PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p3)
> + if (subsys_dev != PCI_SUBDEVICE_ID_EFAR_PCI11414)
> + return max_port[0];
> + else
> + return 4;
> + else
> + return max_port[subsys_dev];
Too many redundant 'else'.
if (subsys_dev <= PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p3)
return max_port[subsys_dev];
(however better to compare with your size of the array)
if (subsys_dev <= ARRAY_SIZE(max_port))
return max_port[subsys_dev];
(in this case you can make sure it is the same as the above using
static_assert(), so it won't compile otherwise)
if (subsys_dev != PCI_SUBDEVICE_ID_EFAR_PCI11414)
return max_port[0];
return 4;
> +}
...
> +static int pci1xxxx_logical_to_physical_port_translate(int subsys_dev, int port)
> +{
> + static int logical_to_physical_port_idx[][MAX_PORTS] = {
> + {0, 1, 2, 3},/* PCI12000 PCI11010 PCI11101 PCI11400 PCI11414 */
> + {0, 1, 2, 3},/* PCI4p */
> + {0, 1, 2, -1},/* PCI3p012 */
> + {0, 1, 3, -1},/* PCI3p013 */
> + {0, 2, 3, -1},/* PCI3p023 */
> + {1, 2, 3, -1},/* PCI3p123 */
> + {0, 1, -1, -1},/* PCI2p01 */
> + {0, 2, -1, -1},/* PCI2p02 */
> + {0, 3, -1, -1},/* PCI2p03 */
> + {1, 2, -1, -1},/* PCI2p12 */
> + {1, 3, -1, -1},/* PCI2p13 */
> + {2, 3, -1, -1},/* PCI2p23 */
> + {0, -1, -1, -1},/* PCI1p0 */
> + {1, -1, -1, -1},/* PCI1p1 */
> + {2, -1, -1, -1},/* PCI1p2 */
> + {3, -1, -1, -1},/* PCI1p3 */
> + };
> +
> + if (subsys_dev > PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p3)
> + return logical_to_physical_port_idx[0][port];
> + else
> + return logical_to_physical_port_idx[subsys_dev][port];
Similar comments as per above function.
> +}
...
> + priv->membase = pcim_iomap(pdev, 0, 0);
You issued a new version of the series without settling on this.
As you said there will be no hardware that uses IO ports, why do
you need pci_iomap()? I guess what you may use pci_ioremap_bar().
> + if (!priv->membase)
> + return -ENOMEM;
...
> + priv->pdev = pdev;
> + subsys_dev = priv->pdev->subsystem_device;
Why use priv?
> + priv->nr = nr_ports;
> + pci_set_master(pdev);
> + max_vec_reqd = pci1xxxx_get_max_port(subsys_dev);
The above needs a bit of reshuffling and perhaps a blank line or lines.
Make it ordered and grouped more logically.
...
> + num_vectors = pci_alloc_irq_vectors(pdev, 1, max_vec_reqd,
> + PCI_IRQ_ALL_TYPES);
I would leave this on a single line (you have such a long lines already in your
code).
> + if (num_vectors < 0)
> + return num_vectors;
...
> +static const struct pci_device_id pci1xxxx_pci_tbl[] = {
> + { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_PCI11010) },
> + { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_PCI11101) },
> + { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_PCI11400) },
> + { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_PCI11414) },
> + { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_PCI12000) },
Can be simplified a bit by PCI_VDEVICE().
> + {}
> +};
--
With Best Regards,
Andy Shevchenko
> From: Andy Shevchenko <[email protected]>
> Sent: Sunday, December 11, 2022 2:45 AM
> To: Kumaravel Thiagarajan - I21417
> <[email protected]>
> Subject: Re: [PATCH v8 tty-next 2/4] serial: 8250_pci1xxxx: Add driver for
> quad-uart support
>
> > + 4,/* PCI1p3 */
> > + };
>
> If you move this outside of the function you may use static_assert(), see
> below why.
If you move this outside of the function -> Do you suggest to move the array outside
the function and make it global?
>
> if (subsys_dev <= ARRAY_SIZE(max_port))
> return max_port[subsys_dev];
>
> (in this case you can make sure it is the same as the above using
> static_assert(), so it won't compile otherwise)
I am not getting this. You suggest doing something like this:
static_assert(subsys_dev <= ARRAY_SIZE(max_port)) ?
> > + priv->membase = pcim_iomap(pdev, 0, 0);
>
> As you said there will be no hardware that uses IO ports, why do you need
> pci_iomap()? I guess what you may use pci_ioremap_bar().
>
> > + if (!priv->membase)
> > + return -ENOMEM;
Okay, I will use pci_ioremap_bar(pdev, 0)
> > + priv->nr = nr_ports;
> > + pci_set_master(pdev);
> > + max_vec_reqd = pci1xxxx_get_max_port(subsys_dev);
>
> The above needs a bit of reshuffling and perhaps a blank line or lines.
> Make it ordered and grouped more logically.
Okay. I will do something like this:
pci_set_master(pdev);
<NL>
priv->pdev = pdev;
priv->nr = nr_ports;
<NL>
subsys_dev = priv->pdev->subsystem_device;
max_vec_reqd = pci1xxxx_get_max_port(subsys_dev);
<NL>
num_vectors = pci_alloc_irq_vectors(pdev, 1, max_vec_reqd, PCI_IRQ_ALL_TYPES);
if (num_vectors < 0)
return num_vectors;
> Can be simplified a bit by PCI_VDEVICE().
Okay.
Thanks,
Tharun Kumar P
On 11. 12. 22, 2:47, Kumaravel Thiagarajan wrote:
> pci1xxxx is a PCIe switch with a multi-function endpoint on one of
> its downstream ports. Quad-uart is one of the functions in the
> multi-function endpoint. This driver loads for the quad-uart and
> enumerates single or multiple instances of uart based on the PCIe
> subsystem device ID.
>
> Co-developed-by: Tharun Kumar P <[email protected]>
> Signed-off-by: Tharun Kumar P <[email protected]>
> Signed-off-by: Kumaravel Thiagarajan <[email protected]>
...
> --- /dev/null
> +++ b/drivers/tty/serial/8250/8250_pci1xxxx.c
> @@ -0,0 +1,337 @@
...
> +struct pci1xxxx_8250 {
> + struct pci_dev *pdev;
> + unsigned int nr;
> + void __iomem *membase;
> + int line[];
> +};
...
> +static int pci1xxxx_get_max_port(int subsys_dev)
Both look like should be unsigned.
> +{
> + static int max_port[] = {
const unsigned
> + 1,/* PCI12000 PCI11010 PCI11101 PCI11400 */
> + 4,/* PCI4p */
> + 3,/* PCI3p012 */
> + 4,/* PCI3p013 */
> + 4,/* PCI3p023 */
> + 4,/* PCI3p123 */
> + 2,/* PCI2p01 */
> + 3,/* PCI2p02 */
> + 4,/* PCI2p03 */
> + 3,/* PCI2p12 */
> + 4,/* PCI2p13 */
> + 4,/* PCI2p23 */
> + 1,/* PCI1p0 */
> + 2,/* PCI1p1 */
> + 3,/* PCI1p2 */
> + 4,/* PCI1p3 */
> + };
> +
> + if (subsys_dev > PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p3)
> + if (subsys_dev != PCI_SUBDEVICE_ID_EFAR_PCI11414)
> + return max_port[0];
> + else
> + return 4;
> + else
No need for this else. And you should use {}.
> + return max_port[subsys_dev];
> +
> +}
> +
> +static int pci1xxxx_logical_to_physical_port_translate(int subsys_dev, int port)
> +{
> + static int logical_to_physical_port_idx[][MAX_PORTS] = {
const unsigned.
> + {0, 1, 2, 3},/* PCI12000 PCI11010 PCI11101 PCI11400 PCI11414 */
> + {0, 1, 2, 3},/* PCI4p */
> + {0, 1, 2, -1},/* PCI3p012 */
> + {0, 1, 3, -1},/* PCI3p013 */
> + {0, 2, 3, -1},/* PCI3p023 */
> + {1, 2, 3, -1},/* PCI3p123 */
> + {0, 1, -1, -1},/* PCI2p01 */
> + {0, 2, -1, -1},/* PCI2p02 */
> + {0, 3, -1, -1},/* PCI2p03 */
> + {1, 2, -1, -1},/* PCI2p12 */
> + {1, 3, -1, -1},/* PCI2p13 */
> + {2, 3, -1, -1},/* PCI2p23 */
> + {0, -1, -1, -1},/* PCI1p0 */
> + {1, -1, -1, -1},/* PCI1p1 */
> + {2, -1, -1, -1},/* PCI1p2 */
> + {3, -1, -1, -1},/* PCI1p3 */
> + };
> +
> + if (subsys_dev > PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p3)
> + return logical_to_physical_port_idx[0][port];
> + else
No need for this else.
> + return logical_to_physical_port_idx[subsys_dev][port];
> +}
> +
> +static int pci1xxxx_serial_probe(struct pci_dev *pdev,
> + const struct pci_device_id *id)
> +{
> + struct device *dev = &pdev->dev;
> + struct pci1xxxx_8250 *priv;
> + struct uart_8250_port uart;
> + unsigned int nr_ports, i;
> + int max_vec_reqd;
> + int num_vectors;
> + int subsys_dev;
> + int port_idx;
> + int rc;
> +
> + rc = pcim_enable_device(pdev);
> + if (rc)
> + return rc;
> +
> + nr_ports = pci1xxxx_get_num_ports(pdev);
> +
> + priv = devm_kzalloc(dev, struct_size(priv, line, nr_ports), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->membase = pcim_iomap(pdev, 0, 0);
> + if (!priv->membase)
> + return -ENOMEM;
> +
> + priv->pdev = pdev;
What do you need pdev in priv for? It looks superfluous after passing it
to pci1xxxx_setup().
> + subsys_dev = priv->pdev->subsystem_device;
> + priv->nr = nr_ports;
> + pci_set_master(pdev);
> + max_vec_reqd = pci1xxxx_get_max_port(subsys_dev);
> + num_vectors = pci_alloc_irq_vectors(pdev, 1, max_vec_reqd,
> + PCI_IRQ_ALL_TYPES);
> + if (num_vectors < 0)
> + return num_vectors;
> +
> + memset(&uart, 0, sizeof(uart));
> + uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT;
> + uart.port.uartclk = UART_CLOCK_DEFAULT;
> + uart.port.dev = dev;
> +
> + if (num_vectors == max_vec_reqd)
> + writeb(UART_PCI_CTRL_SET_MULTIPLE_MSI,
> + priv->membase + UART_PCI_CTRL_REG);
> +
> + for (i = 0; i < nr_ports; i++)
> + priv->line[i] = -ENODEV;
Why is this not a part of the following (same) loop?
> +
> + for (i = 0; i < nr_ports; i++) {
> + port_idx = pci1xxxx_logical_to_physical_port_translate(subsys_dev, i);
> +
> + if (num_vectors == max_vec_reqd)
> + uart.port.irq = pci_irq_vector(priv->pdev, port_idx);
> + else
> + uart.port.irq = pci_irq_vector(pdev, 0);
> +
> + rc = pci1xxxx_setup(priv, &uart, port_idx);
> + if (rc) {
> + dev_warn(dev, "Failed to setup port %u\n", i);
> + continue;
> + }
> +
> + priv->line[i] = serial8250_register_8250_port(&uart);
> + if (priv->line[i] < 0) {
> + dev_warn(dev,
> + "Couldn't register serial port %lx, irq %d, type %d, error %d\n",
> + uart.port.iobase, uart.port.irq, uart.port.iotype,
> + priv->line[i]);
> + }
> + }
> +
> + pci_set_drvdata(pdev, priv);
> +
> + return 0;
> +}
> +
> +static void pci1xxxx_serial_remove(struct pci_dev *dev)
> +{
> + struct pci1xxxx_8250 *priv = pci_get_drvdata(dev);
> + int i;
unsigned as priv->nr is.
> +
> + for (i = 0; i < priv->nr; i++) {
> + if (priv->line[i] >= 0)
> + serial8250_unregister_port(priv->line[i]);
> + }
> +}
> +
> +static const struct pci_device_id pci1xxxx_pci_tbl[] = {
> + { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_PCI11010) },
> + { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_PCI11101) },
> + { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_PCI11400) },
> + { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_PCI11414) },
> + { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_PCI12000) },
> + {}
thanks,
--
js
suse labs
On Mon, Dec 12, 2022 at 07:16:55AM +0000, [email protected] wrote:
> > From: Andy Shevchenko <[email protected]>
> > Sent: Sunday, December 11, 2022 2:45 AM
> > To: Kumaravel Thiagarajan - I21417
> > <[email protected]>
...
> > > + 4,/* PCI1p3 */
> > > + };
> >
> > If you move this outside of the function you may use static_assert(), see
> > below why.
>
> If you move this outside of the function -> Do you suggest to move the array outside
> the function
Yes.
> and make it global?
I don't get this, sorry.
The array is already global, only name is scoped inside the certain function.
...
> > if (subsys_dev <= ARRAY_SIZE(max_port))
> > return max_port[subsys_dev];
> >
> > (in this case you can make sure it is the same as the above using
> > static_assert(), so it won't compile otherwise)
>
> I am not getting this. You suggest doing something like this:
> static_assert(subsys_dev <= ARRAY_SIZE(max_port)) ?
No, you need to compare ARRAY_SIZE() to the macro that you removed from
the context here.
...
> > > + priv->nr = nr_ports;
> > > + pci_set_master(pdev);
> > > + max_vec_reqd = pci1xxxx_get_max_port(subsys_dev);
> >
> > The above needs a bit of reshuffling and perhaps a blank line or lines.
> > Make it ordered and grouped more logically.
>
> Okay. I will do something like this:
> pci_set_master(pdev);
> <NL>
> priv->pdev = pdev;
> priv->nr = nr_ports;
> <NL>
> subsys_dev = priv->pdev->subsystem_device;
Almost good, but why priv is still here?
> max_vec_reqd = pci1xxxx_get_max_port(subsys_dev);
> <NL>
> num_vectors = pci_alloc_irq_vectors(pdev, 1, max_vec_reqd, PCI_IRQ_ALL_TYPES);
> if (num_vectors < 0)
> return num_vectors;
--
With Best Regards,
Andy Shevchenko
Thanks for the comments, Jiri. I will address in v9 version of patch.
> From: Jiri Slaby <[email protected]>
> Sent: Monday, December 12, 2022 1:15 PM
> To: Kumaravel Thiagarajan - I21417
> <[email protected]>; [email protected]
> Subject: Re: [PATCH v8 tty-next 2/4] serial: 8250_pci1xxxx: Add driver for
> quad-uart support
> > + if (num_vectors == max_vec_reqd)
I am also planning to make max_vec_reqd as unsigned. Since I am comparing it only with positive values (of num_vectors) here (and below).
Thanks,
Tharun Kumar P
> From: Jiri Slaby <[email protected]>
> Sent: Monday, December 12, 2022 1:15 PM
> To: Kumaravel Thiagarajan - I21417
> <[email protected]>; [email protected]
> Subject: Re: [PATCH v8 tty-next 2/4] serial: 8250_pci1xxxx: Add driver for
> quad-uart support
>
> > + static int logical_to_physical_port_idx[][MAX_PORTS] = {
>
> const unsigned.
>
> > + {0, 1, 2, 3},/* PCI12000 PCI11010 PCI11101 PCI11400 PCI11414 */
> > + {0, 1, 2, 3},/* PCI4p */
> > + {0, 1, 2, -1},/* PCI3p012 */
Hi Jiri,
This array contains negative values. Thereby, not using unsigned.
Thanks,
Tharun Kumar P