I am experiencing problems with the CPU idle call feature on an ASUS P4PE
(Intel 82845PE MCH and Intel 82801DB ICH4 chipsets). I am using kernel
2.4.20-8 (Red Hat 9.0). We were having trouble with our system "hanging"
after running for a while. By this I mean, that no IRQs are getting
through, but software components are still running. We have a proprietary
PCI DMA bus master device that works fine in PIII system, but the plans are
to ship our product using this ASUS MoBo. In the process of trying to debug
this problem, we have updated BIOS, tweaked BIOS parameters, added debug to
the kernel to determine the status of our IRQ, etc. When I changed the
CONFIG_APM_CPU_IDLE to no, our 3 hour test runs to completion. Previously
this test would cause the system to hang within minutes. I have tried
various combinations of APM tweaking with the following results:
TEST: RESULTS:
1) Power Management enabled in BIOS Ran to completion (~ 3hours)
Kernel configured with CONFIG_APM_CPU_IDLE not set
2) Power Management disabled in BIOS locked up after a few minutes
Kernel configured with CONFIG_APM_CPU_IDLE_CALLS=y
3) Power Management disabled in BIOS Ran to completion
Kernel configured with CONFIG_APM_CPU_IDLE_CALLS not set
4) Power Management disabled in BIOS Ran to completion
Kernel configured with CONFIG_APM_CPU_IDLE_CALLS=y
Kernel parameter passed in: amp=off
5) Power Management disabled in BIOS locked up after a few minutes
Kernel configured with CONFIG_APM_CPU_IDLE_CALLS=y
Kernel parameter passed in: amp=allow_ints
6) Power Management disabled in BIOS Ran to completion
Kernel configured with CONFIG_APM_CPU_IDLE_CALLS=y
Changed apm_do_idle to NOT make BIOS call
For what it's worth: In the process of testing this, I also noted that the
apm_do_idle always returns 0 (no evidence of the printk messages indicating
clock slowed down or BIOS refused call). I originally suspected that when
the linux APM driver makes an idle call to BIOS, control never returns;
therefore, interrupts never get re-enabled and our system appears to freeze.
However, even though test #5 should have allowed interrupts to stay on, we
still had the described lockup. It appears to be timing related since
thousands of these CPU idle BIOS calls are made before the system locks up.
(I determined this by adding 3 counters in apm_cpu_idle routine to determine
how many times the BIOS, original and default idle routines were called. A
user app and driver combo request the values of these counters every
second.)
I noticed that this version of linux does not have this particular ASUS MoBo
in it's APM blacklist. Has anyone seen similar symptoms with other MoBos
which have crippled CPU idle BIOSs? I would be happy to provide any
additional testing needed to determine if this is a true APM/motherboard
interaction related problem.
Thanks in advance! Please cc me in your response.
Kathy Frazier
Senior Software Engineer
Max Daetwyler Corporation-Dayton Division
2133 Lyons Road
Miamisburg, OH 45342
Tel #: 937.439-1582 ext 6158
Fax #: 937.439-1592
Email: [email protected]
http://www.daetwyler.com
<snip>
I'm curious why you are using the APM method.
Have you tried ACPI(which replaced APM a long time ago)
And also out of curiosity, have you played with the config_apm_allow_ints?
Mike
Mike,
Actually, using APM was not done on purpose. It was configured in already
from our Red Hat 9 install. We really don't need any Power Management at
all, since it is not a lap top. I have not tried the ACPI at all. I did
try the allow_ints feature (test #5), but it still locked up. From this
test I gathered that it was not some "cli" that was never undone. So maybe
the BIOS hoses something?
>5) Power Management disabled in BIOS locked up after a few minutes
> Kernel configured with CONFIG_APM_CPU_IDLE_CALLS=y
> Kernel parameter passed in: amp=allow_ints
Kathy
-----Original Message-----
From: Mike Dresser [mailto:[email protected]]
Sent: Thursday, August 07, 2003 10:11 AM
To: Kathy Frazier
Cc: [email protected]
Subject: Re: [APM] CPU idle calls causing problem with ASUS P4PE MoBo
<snip>
I'm curious why you are using the APM method.
Have you tried ACPI(which replaced APM a long time ago)
And also out of curiosity, have you played with the config_apm_allow_ints?
Mike
Hi Kathy!
On Thu, Aug 07, 2003 at 11:08:09AM -0500, Kathy Frazier wrote:
[some important info zapped]
> When I changed the CONFIG_APM_CPU_IDLE to no, our 3 hour test
> runs to completion. Previously this test would cause the system
> to hang within minutes.
[some more important info zapped]
> I noticed that this version of linux does not have this particular ASUS MoBo
> in it's APM blacklist. Has anyone seen similar symptoms with other MoBos
> which have crippled CPU idle BIOSs? I would be happy to provide any
> additional testing needed to determine if this is a true APM/motherboard
> interaction related problem.
>
> Thanks in advance! Please cc me in your response.
lets assume that the APM/BIOS/idle stuff is broken
(which, as a matter of fact, is possible and very likely)
and this is the cause for the missing interrupts your
hardware sends, but the kernel never receives, wouldn't
this cause the same issues (missing interrupts) for, lets
say the harddisk or the ethernet?
anyway, glad you could '(re)solve?' your issues,
best,
Herbert
>
> Kathy Frazier
> Senior Software Engineer
> Max Daetwyler Corporation-Dayton Division
> 2133 Lyons Road
> Miamisburg, OH 45342
> Tel #: 937.439-1582 ext 6158
> Fax #: 937.439-1592
> Email: [email protected]
> http://www.daetwyler.com
>
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
On Thu, 2003-08-07 at 18:08, Kathy Frazier wrote:
> I am experiencing problems with the CPU idle call feature on an ASUS P4PE
> (Intel 82845PE MCH and Intel 82801DB ICH4 chipsets). I am using kernel
> 2.4.20-8 (Red Hat 9.0).
that's an old kernel.. several updates have followed since... several
machines have been added to the apm idle blacklist in later kernels
>
> We were having trouble with our system "hanging"
> after running for a while. By this I mean, that no IRQs are getting
> through, but software components are still running. We have a proprietary
> PCI DMA bus master device that works fine in PIII system, but the plans are
> to ship our product using this ASUS MoBo. In the process of trying to debug
> this problem, we have updated BIOS, tweaked BIOS parameters, added debug to
> the kernel to determine the status of our IRQ, etc. When I changed the
> CONFIG_APM_CPU_IDLE to no, our 3 hour test runs to completion. Previously
> this test would cause the system to hang within minutes. I have tried
> various combinations of APM tweaking with the following results:
if you can mail the top part of the dmidecode output (the part that has
the bios idents) the machine can trivially be added to the apm idle
blacklist.
>if you can mail the top part of the dmidecode output (the part that has
>the bios idents) the machine can trivially be added to the apm idle
>blacklist.
Is this in the message file? I didn't see anything with "DMI" in it. Is
this what you are looking for? If not, please let me know.
Thanks,
Kathy Frazier
Jul 22 04:11:45 rti10 syslogd 1.4.1: restart.
Jul 22 03:02:05 rti10 modprobe: modprobe: Can't locate module char-major-188
Jul 22 03:04:25 rti10 kernel: hda: dma_intr: status=0x50 { DriveReady
SeekComplete }
Jul 22 03:16:05 rti10 modprobe: modprobe: Can't locate module char-major-188
Jul 22 03:16:25 rti10 kernel:
Jul 22 03:21:05 rti10 modprobe: modprobe: Can't locate module char-major-188
Jul 22 03:23:05 rti10 kernel: hdc: lost interrupt
Jul 22 03:27:45 rti10 modprobe: modprobe: Can't locate module char-major-188
Jul 22 03:29:45 rti10 kernel: hdc: lost interrupt
Jul 22 03:34:25 rti10 cups: cupsd startup succeeded
Jul 22 08:22:27 rti10 syslogd 1.4.1: restart.
Jul 22 08:22:27 rti10 syslog: syslogd startup succeeded
Jul 22 08:22:27 rti10 kernel: klogd 1.4.1, log source = /proc/kmsg started.
Jul 22 08:22:27 rti10 kernel: Linux version 2.4.20-8
([email protected]) (gcc version 3.2.2 20030222 (Red Hat
Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003
Jul 22 08:22:27 rti10 kernel: BIOS-provided physical RAM map:
Jul 22 08:22:27 rti10 kernel: BIOS-e820: 0000000000000000 -
000000000009fc00 (usable)
Jul 22 08:22:27 rti10 kernel: BIOS-e820: 000000000009fc00 -
00000000000a0000 (reserved)
Jul 22 08:22:27 rti10 kernel: BIOS-e820: 00000000000f0000 -
0000000000100000 (reserved)
Jul 22 08:22:27 rti10 kernel: BIOS-e820: 0000000000100000 -
000000001ffec000 (usable)
Jul 22 08:22:27 rti10 kernel: BIOS-e820: 000000001ffec000 -
000000001ffef000 (ACPI data)
Jul 22 08:22:27 rti10 kernel: BIOS-e820: 000000001ffef000 -
000000001ffff000 (reserved)
Jul 22 08:22:27 rti10 kernel: BIOS-e820: 000000001ffff000 -
0000000020000000 (ACPI NVS)
Jul 22 08:22:27 rti10 kernel: BIOS-e820: 00000000fec00000 -
00000000fec01000 (reserved)
Jul 22 08:22:27 rti10 kernel: BIOS-e820: 00000000fee00000 -
00000000fee01000 (reserved)
Jul 22 08:22:27 rti10 kernel: BIOS-e820: 00000000ffff0000 -
0000000100000000 (reserved)
Jul 22 08:22:27 rti10 kernel: 0MB HIGHMEM available.
Jul 22 08:22:27 rti10 kernel: 511MB LOWMEM available.
Jul 22 08:22:27 rti10 kernel: On node 0 totalpages: 131052
Jul 22 08:22:27 rti10 kernel: zone(0): 4096 pages.
Jul 22 08:22:27 rti10 kernel: zone(1): 126956 pages.
Jul 22 08:22:27 rti10 kernel: zone(2): 0 pages.
Jul 22 08:22:27 rti10 kernel: Kernel command line: ro root=LABEL=/
Jul 22 08:22:27 rti10 kernel: Initializing CPU#0
Jul 22 08:22:27 rti10 kernel: Detected 2405.482 MHz processor.
Jul 22 08:22:27 rti10 kernel: Console: colour VGA+ 80x25
Jul 22 08:22:27 rti10 kernel: Calibrating delay loop... 4797.23 BogoMIPS
Jul 22 08:22:27 rti10 kernel: Memory: 511336k/524208k available (1347k
kernel code, 10308k reserved, 999k data, 132k init, 0k highmem)
Jul 22 08:22:27 rti10 kernel: Dentry cache hash table entries: 65536 (order:
7, 524288 bytes)
Jul 22 08:22:27 rti10 kernel: Inode cache hash table entries: 32768 (order:
6, 262144 bytes)
Jul 22 08:22:27 rti10 kernel: Mount cache hash table entries: 512 (order: 0,
4096 bytes)
Jul 22 08:22:27 rti10 kernel: Buffer-cache hash table entries: 32768 (order:
5, 131072 bytes)
Jul 22 08:22:27 rti10 kernel: Page-cache hash table entries: 131072 (order:
7, 524288 bytes)
Jul 22 08:22:27 rti10 syslog: klogd startup succeeded
Jul 22 08:22:27 rti10 kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
Jul 22 08:22:27 rti10 kernel: CPU: L2 cache: 512K
Jul 22 08:22:27 rti10 kernel: Intel machine check architecture supported.
Jul 22 08:22:27 rti10 kernel: Intel machine check reporting enabled on
CPU#0.
Jul 22 08:22:27 rti10 portmap: portmap startup succeeded
Jul 22 08:22:27 rti10 kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz
stepping 07
Jul 22 08:22:28 rti10 kernel: Enabling fast FPU save and restore... done.
Jul 22 08:22:28 rti10 nfslock: rpc.statd startup succeeded
Jul 22 08:22:28 rti10 kernel: Enabling unmasked SIMD FPU exception
support... done.
Jul 22 08:22:28 rti10 rpc.statd[3174]: Version 1.0.1 Starting
Jul 22 08:22:28 rti10 kernel: Checking 'hlt' instruction... OK.
Jul 22 08:22:28 rti10 keytable:
Jul 22 08:22:28 rti10 kernel: POSIX conformance testing by UNIFIX
Jul 22 08:22:28 rti10 keytable: Loading system font:
Jul 22 08:22:28 rti10 kernel: mtrr: v1.40 (20010327) Richard Gooch
([email protected])
Jul 22 08:22:28 rti10 kernel: mtrr: detected mtrr type: Intel
Jul 22 08:22:28 rti10 kernel: PCI: PCI BIOS revision 2.10 entry at 0xf1e50,
last bus=2
Jul 22 08:22:28 rti10 kernel: PCI: Using configuration type 1
Jul 22 08:22:28 rti10 kernel: PCI: Probing PCI hardware
Jul 22 08:22:28 rti10 kernel: PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Jul 22 08:22:28 rti10 kernel: Transparent bridge - Intel Corp. 82801BA/CA/DB
PCI Bridge
Jul 22 08:22:28 rti10 kernel: PCI: Using IRQ router PIIX [8086/24c0] at
00:1f.0
Jul 22 08:22:28 rti10 kernel: isapnp: Scanning for PnP cards...
Jul 22 08:22:28 rti10 kernel: isapnp: No Plug & Play device found
Jul 22 08:22:28 rti10 kernel: Linux NET4.0 for Linux 2.4
Jul 22 08:22:28 rti10 kernel: Based upon Swansea University Computer Society
NET3.039
Jul 22 08:22:28 rti10 kernel: Initializing RT netlink socket
Jul 22 08:22:28 rti10 kernel: apm: BIOS version 1.2 Flags 0x03 (Driver
version 1.16)
Jul 22 08:22:28 rti10 kernel: Starting kswapd
Jul 22 08:22:28 rti10 kernel: VFS: Disk quotas vdquot_6.5.1
Jul 22 08:22:28 rti10 kernel: pty: 2048 Unix98 ptys configured
Jul 22 08:22:28 rti10 kernel: Serial driver version 5.05c (2001-07-08) with
MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Jul 22 08:22:28 rti10 kernel: ttyS0 at 0x03f8 (irq = 4) is a 16550A
Jul 22 08:22:28 rti10 kernel: ttyS1 at 0x02f8 (irq = 3) is a 16550A
Jul 22 08:22:28 rti10 keytable:
Jul 22 08:22:28 rti10 kernel: Real Time Clock Driver v1.10e
Jul 22 08:22:28 rti10 rc: Starting keytable: succeeded
Jul 22 08:22:28 rti10 kernel: Floppy drive(s): fd0 is 1.44M
Jul 22 08:22:28 rti10 kernel: FDC 0 is a post-1991 82077
Jul 22 08:22:28 rti10 kernel: NET4: Frame Diverter 0.46
Jul 22 08:22:28 rti10 kernel: RAMDISK driver initialized: 16 RAM disks of
4096K size 1024 blocksize
Jul 22 08:22:28 rti10 kernel: Uniform Multi-Platform E-IDE driver Revision:
7.00beta-2.4
Jul 22 08:22:28 rti10 kernel: ide: Assuming 33MHz system bus speed for PIO
modes; override with idebus=xx
Jul 22 08:22:28 rti10 kernel: ICH4: IDE controller at PCI slot 00:1f.1
Jul 22 08:22:28 rti10 kernel: PCI: Found IRQ 11 for device 00:1f.1
Jul 22 08:22:28 rti10 kernel: PCI: Sharing IRQ 11 with 00:1d.2
Jul 22 08:22:28 rti10 kernel: ICH4: chipset revision 2
Jul 22 08:22:28 rti10 kernel: ICH4: not 100%% native mode: will probe irqs
later
Jul 22 08:22:28 rti10 kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS
settings: hda:DMA, hdb:pio
Jul 22 08:22:28 rti10 kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS
settings: hdc:DMA, hdd:pio
Jul 22 08:22:28 rti10 kernel: hda: ST340016A, ATA DISK drive
Jul 22 08:22:28 rti10 kernel: blk: queue c03c9f40, I/O limit 4095Mb (mask
0xffffffff)
Jul 22 08:22:28 rti10 kernel: hdc: FX54++W, ATAPI CD/DVD-ROM drive
Jul 22 08:22:28 rti10 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jul 22 08:22:28 rti10 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Jul 22 08:22:28 rti10 kernel: hda: host protected area => 1
Jul 22 08:22:28 rti10 kernel: hda: 78165360 sectors (40021 MB) w/2048KiB
Cache, CHS=4865/255/63, UDMA(100)
Jul 22 08:22:28 rti10 kernel: ide-floppy driver 0.99.newide
Jul 22 08:22:28 rti10 kernel: Partition check:
Jul 22 08:22:28 rti10 kernel: hda: hda1 hda2 hda3
Jul 22 08:22:28 rti10 kernel: ide-floppy driver 0.99.newide
Jul 22 08:22:28 rti10 kernel: md: md driver 0.90.0 MAX_MD_DEVS=256,
MD_SB_DISKS=27
Jul 22 08:22:28 rti10 kernel: md: Autodetecting RAID arrays.
Jul 22 08:22:28 rti10 random: Initializing random number generator:
succeeded
Jul 22 08:22:28 rti10 kernel: md: autorun ...
Jul 22 08:22:28 rti10 kernel: md: ... autorun DONE.
Jul 22 08:22:28 rti10 kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Jul 22 08:22:28 rti10 kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Jul 22 08:22:28 rti10 kernel: IP: routing cache hash table of 4096 buckets,
32Kbytes
Jul 22 08:22:28 rti10 kernel: TCP: Hash tables configured (established 32768
bind 65536)
Jul 22 08:22:28 rti10 kernel: Linux IP multicast router 0.06 plus PIM-SM
Jul 22 08:22:28 rti10 kernel: NET4: Unix domain sockets 1.0/SMP for Linux
NET4.0.
Jul 22 08:22:28 rti10 kernel: RAMDISK: Compressed image found at block 0
Jul 22 08:22:28 rti10 kernel: Freeing initrd memory: 146k freed
Jul 22 08:22:28 rti10 kernel: VFS: Mounted root (ext2 filesystem).
Jul 22 08:22:28 rti10 kernel: Journalled Block Device driver loaded
Jul 22 08:22:28 rti10 kernel: EXT3-fs: INFO: recovery required on readonly
filesystem.
Jul 22 08:22:28 rti10 kernel: EXT3-fs: write access will be enabled during
recovery.
Jul 22 08:22:28 rti10 kernel: kjournald starting. Commit interval 5 seconds
Jul 22 08:22:28 rti10 kernel: EXT3-fs: ide0(3,2): orphan cleanup on readonly
fs
Jul 22 08:22:28 rti10 rc: Starting pcmcia: succeeded
Jul 22 08:22:28 rti10 netfs: Mounting other filesystems: succeeded
Jul 22 08:22:28 rti10 kernel: EXT3-fs: ide0(3,2): 4 orphan inodes deleted
Jul 22 08:22:28 rti10 aksparlnx: Loading Aladdin HASP/Hardlock driver:
Jul 22 08:22:28 rti10 kernel: EXT3-fs: recovery complete.
Jul 22 08:22:28 rti10 kernel: EXT3-fs: mounted filesystem with ordered data
mode.
Jul 22 08:22:28 rti10 kernel: Freeing unused kernel memory: 132k freed
Jul 22 08:22:28 rti10 kernel: usb.c: registered new driver usbdevfs
Jul 22 08:22:28 rti10 kernel: usb.c: registered new driver hub
Jul 22 08:22:28 rti10 kernel: usb-uhci.c: $Revision: 1.275 $ time 17:59:01
Mar 13 2003
Jul 22 08:22:28 rti10 kernel: usb-uhci.c: High bandwidth mode enabled
Jul 22 08:22:28 rti10 kernel: PCI: Found IRQ 5 for device 00:1d.0
Jul 22 08:22:28 rti10 kernel: PCI: Sharing IRQ 5 with 01:00.0
Jul 22 08:22:28 rti10 kernel: usb-uhci.c: USB UHCI at I/O 0xb800, IRQ 5
Jul 22 08:22:28 rti10 kernel: usb-uhci.c: Detected 2 ports
Jul 22 08:22:28 rti10 kernel: usb.c: new USB bus registered, assigned bus
number 1
Jul 22 08:22:28 rti10 kernel: hub.c: USB hub found
Jul 22 08:22:28 rti10 kernel: hub.c: 2 ports detected
Jul 22 08:22:28 rti10 kernel: PCI: Found IRQ 5 for device 00:1d.1
Jul 22 08:22:28 rti10 kernel: usb-uhci.c: USB UHCI at I/O 0xb400, IRQ 5
Jul 22 08:22:28 rti10 kernel: usb-uhci.c: Detected 2 ports
Jul 22 08:22:28 rti10 kernel: usb.c: new USB bus registered, assigned bus
number 2
Jul 22 08:22:28 rti10 kernel: hub.c: USB hub found
Jul 22 08:22:28 rti10 kernel: hub.c: 2 ports detected
Jul 22 08:22:28 rti10 kernel: PCI: Found IRQ 11 for device 00:1d.2
Jul 22 08:22:28 rti10 kernel: PCI: Sharing IRQ 11 with 00:1f.1
Jul 22 08:22:28 rti10 kernel: usb-uhci.c: USB UHCI at I/O 0xb000, IRQ 11
Jul 22 08:22:28 rti10 kernel: usb-uhci.c: Detected 2 ports
Jul 22 08:22:28 rti10 kernel: usb.c: new USB bus registered, assigned bus
number 3
Jul 22 08:22:28 rti10 kernel: hub.c: USB hub found
Jul 22 08:22:28 rti10 kernel: hub.c: 2 ports detected
Jul 22 08:22:28 rti10 kernel: usb-uhci.c: v1.275:USB Universal Host
Controller Interface driver
Jul 22 08:22:28 rti10 kernel: PCI: Found IRQ 9 for device 00:1d.7
Jul 22 08:22:28 rti10 kernel: ehci-hcd 00:1d.7: Intel Corp. 82801DB USB EHCI
Controller
Jul 22 08:22:28 rti10 kernel: ehci-hcd 00:1d.7: irq 9, pci mem e0851000
Jul 22 08:22:29 rti10 kernel: usb.c: new USB bus registered, assigned bus
number 4
Jul 22 08:22:29 rti10 kernel: ehci-hcd 00:1d.7: enabled 64bit PCI DMA
Jul 22 08:22:29 rti10 kernel: PCI: 00:1d.7 PCI cache line size set
incorrectly (0 bytes) by BIOS/FW.
Jul 22 08:22:29 rti10 kernel: PCI: 00:1d.7 PCI cache line size corrected to
128.
Jul 22 08:22:29 rti10 kernel: ehci-hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00,
driver 2003-Jan-22
Jul 22 08:22:29 rti10 kernel: hub.c: USB hub found
Jul 22 08:22:29 rti10 kernel: hub.c: 6 ports detected
Jul 22 08:22:29 rti10 kernel: usb.c: registered new driver hiddev
Jul 22 08:22:29 rti10 kernel: usb.c: registered new driver hid
Jul 22 08:22:29 rti10 kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik
<[email protected]>
Jul 22 08:22:29 rti10 kernel: hid-core.c: USB HID support drivers
Jul 22 08:22:29 rti10 kernel: mice: PS/2 mouse device common for all mice
Jul 22 08:22:29 rti10 kernel: hub.c: connect-debounce failed, port 2
disabled
Jul 22 08:22:29 rti10 kernel: hub.c: new USB device 00:1d.2-2, assigned
address 2
Jul 22 08:22:29 rti10 kernel: usb.c: USB device 2 (vend/prod 0x529/0x1) is
not claimed by any active driver.
Jul 22 08:22:29 rti10 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on
ide0(3,2), internal journal
Jul 22 08:22:29 rti10 kernel: Adding Swap: 1044216k swap-space (priority -1)
Jul 22 08:22:29 rti10 aksparlnx: Warning: kernel-module version mismatch
Jul 22 08:22:29 rti10 kernel: kjournald starting. Commit interval 5 seconds
Jul 22 08:22:29 rti10 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on
ide0(3,1), internal journal
Jul 22 08:22:29 rti10 aksparlnx: ^I/opt/aksparlnx/drv/2.4.19/aksparlnx.o was
compiled for kernel version 2.4.19
Jul 22 08:22:29 rti10 kernel: EXT3-fs: mounted filesystem with ordered data
mode.
Jul 22 08:22:29 rti10 aksparlnx: ^Iwhile this kernel is version 2.4.20-8
Jul 22 08:22:29 rti10 kernel: ohci1394: $Rev: 693 $ Ben Collins
<[email protected]>
Jul 22 08:22:29 rti10 aksparlnx: Warning: loading
/opt/aksparlnx/drv/2.4.19/aksparlnx.o will taint the kernel: non-GPL
license - Copyright 1999-2002 Aladdin Knowledge Systems.
Jul 22 08:22:29 rti10 kernel: PCI: Found IRQ 11 for device 02:03.0
Jul 22 08:22:29 rti10 aksparlnx: See
http://www.tux.org/lkml/#export-tainted for information about tainted
modules
Jul 22 08:22:29 rti10 kernel: ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[11]
MMIO=[f2000000-f20007ff] Max Packet=[2048]
Jul 22 08:22:29 rti10 aksparlnx: Warning: loading
/opt/aksparlnx/drv/2.4.19/aksparlnx.o will taint the kernel: forced load
Jul 22 08:22:29 rti10 kernel: ieee1394: SelfID completion called outside of
bus reset!
Jul 22 08:22:29 rti10 aksparlnx: Module aksparlnx loaded, with warnings
Jul 22 08:22:29 rti10 kernel: parport0: PC-style at 0x378
[PCSPP,TRISTATE,EPP]
Jul 22 08:22:29 rti10 kernel: ip_tables: (C) 2000-2002 Netfilter core team
Jul 22 08:22:29 rti10 kernel: Broadcom 4401 Ethernet Driver bcm4400 ver.
1.0.1 (08/26/02)
Jul 22 08:22:29 rti10 kernel: PCI: Found IRQ 11 for device 02:05.0
Jul 22 08:22:29 rti10 aksparlnx:
Jul 22 08:22:29 rti10 kernel: eth0: Broadcom BCM4401 100Base-T found at mem
f1800000, IRQ 11, node addr 00e018ff35ec
Jul 22 08:22:29 rti10 rc: Starting aksparlnx: succeeded
Jul 22 08:22:29 rti10 kernel: ip_tables: (C) 2000-2002 Netfilter core team
Jul 22 08:22:29 rti10 kernel: parport0: PC-style at 0x378
[PCSPP,TRISTATE,EPP]
Jul 22 08:22:29 rti10 kernel: aksparlnx: EYE/HASP driver v1.05/API
v3.81/major 60 loaded (ppi)
Jul 22 08:22:29 rti10 apmd[3251]: Version 3.0.2 (APM BIOS 1.2, Linux driver
1.16)
Jul 22 08:22:29 rti10 apmd: apmd startup succeeded
Jul 22 08:22:29 rti10 aksusbd[3263]: loaded, daemon version: 1.5, key API
(USB) version: 3.81, key API (parallel) version: 3.81
Jul 22 08:22:29 rti10 aksusbd: aksusbd startup succeeded
Jul 22 08:22:29 rti10 automount[3315]: starting automounter version 3.1.7,
path = /home, maptype = file, mapname = /etc/auto.home
Jul 22 08:22:29 rti10 autofs: automount startup succeeded
Jul 22 08:22:29 rti10 kernel: bcm4400: eth0 NIC Link is Up, 100 Mbps full
duplex
Jul 22 08:22:29 rti10 automount[3315]: using kernel protocol version 3
Jul 22 08:22:25 rti10 network: Setting network parameters: succeeded
Jul 22 08:22:25 rti10 network: Bringing up loopback interface: succeeded
Jul 22 08:22:29 rti10 sshd: succeeded
Jul 22 08:22:30 rti10 apmd[3251]: Charge: * * * (-1% unknown)
Jul 22 08:22:31 rti10 xinetd[3343]: xinetd Version 2.3.10 started with
libwrap options compiled in.
Jul 22 08:22:31 rti10 xinetd[3343]: Started working: 2 available services
Jul 22 08:22:31 rti10 kernel: NETDEV WATCHDOG: eth0: transmit timed out
Jul 22 08:22:33 rti10 xinetd: xinetd startup succeeded
Jul 22 08:22:33 rti10 exportfs[3352]: No 'sync' or 'async' option specified
for export "*:/export/home". Assuming default behaviour ('sync'). NOTE:
this default has changed from previous versions
Jul 22 08:22:33 rti10 exportfs: exportfs: No 'sync' or 'async' option
specified for export "*:/export/home".
Jul 22 08:22:33 rti10 exportfs: Assuming default behaviour ('sync').
Jul 22 08:22:33 rti10 exportfs: NOTE: this default has changed from
previous versions
Jul 22 08:22:33 rti10 kernel: Installing knfsd (copyright (C) 1996
[email protected]).
Jul 22 08:22:33 rti10 nfs: Starting NFS services: succeeded
Jul 22 08:22:33 rti10 nfs: rpc.rquotad startup succeeded
Jul 22 08:22:33 rti10 nfs: rpc.nfsd startup succeeded
Jul 22 08:22:33 rti10 nfs: rpc.mountd startup succeeded
Jul 22 08:22:33 rti10 vsftpd: true startup succeeded
Jul 22 08:22:33 rti10 amd[3396]: switched to logfile "syslog"
Jul 22 08:22:33 rti10 amd[3396]: AM-UTILS VERSION INFORMATION:
Jul 22 08:22:33 rti10 amd[3396]: Copyright (c) 1997-2003 Erez Zadok
Jul 22 08:22:33 rti10 amd[3396]: Copyright (c) 1990 Jan-Simon Pendry
Jul 22 08:22:33 rti10 amd[3396]: Copyright (c) 1990 Imperial College of
Science, Technology & Medicine
Jul 22 08:22:33 rti10 amd[3396]: Copyright (c) 1990 The Regents of the
University of California.
Jul 22 08:22:33 rti10 amd[3396]: am-utils version 6.0.9 (build 1).
Jul 22 08:22:33 rti10 amd[3396]: Built by [email protected] on
date Tue Feb 4 05:46:40 EST 2003.
Jul 22 08:22:33 rti10 amd[3396]: cpu=i386 (little-endian), arch=i386,
karch=i686.
Jul 22 08:22:33 rti10 amd[3396]: full_os=linux, os=linux,
osver=2.4.20-2.25smp, vendor=redhat.
Jul 22 08:22:33 rti10 amd[3396]: Map support for: root, passwd, hesiod,
ldap, union, nisplus, nis, ndbm, file, error.
Jul 22 08:22:33 rti10 amd[3396]: AMFS: nfs, link, nfsx, nfsl, host, linkx,
program, union, inherit, ufs,
Jul 22 08:22:33 rti10 amd[3396]: lofs, cdfs, auto, direct, toplvl,
error.
Jul 22 08:22:33 rti10 amd: Jul 22 08:22:33 rti10 amd[3396]/info: using
configuration file /etc/amd.conf
Jul 22 08:22:33 rti10 amd[3396]: FS: iso9660, lofs, nfs, nfs3, tmpfs, ext2.
Jul 22 08:22:33 rti10 amd[3396]: Network: wire="192.9.200.0"
(netnumber=192.9.200).
Jul 22 08:22:33 rti10 amd[3396]: My ip addr is 192.9.200.239
Jul 22 08:22:33 rti10 amd[3397]: released controlling tty using setsid()
Jul 22 08:22:33 rti10 amd[3397]: file server localhost, type local, state
starts up
Jul 22 08:22:33 rti10 amd[3397]: /dev/hda2 restarted fstype link on /
Jul 22 08:22:33 rti10 amd[3397]: none restarted fstype link on /proc
Jul 22 08:22:33 rti10 amd[3397]: usbdevfs restarted fstype link on
/proc/bus/usb
Jul 22 08:22:33 rti10 amd[3397]: /dev/hda1 restarted fstype link on /boot
Jul 22 08:22:33 rti10 amd[3397]: none restarted fstype link on /dev/pts
Jul 22 08:22:33 rti10 amd[3397]: none restarted fstype link on /dev/shm
Jul 22 08:22:33 rti10 amd[3397]: automount(pid3315) restarted fstype link on
/home
Jul 22 08:22:33 rti10 amd: amd startup succeeded
Jul 22 08:22:33 rti10 amd[3397]: initializing amd.conf map /etc/amd.net of
type file
Jul 22 08:22:33 rti10 oeeclslinuxrti: Starting Linux Collage RTI drivers:
Jul 22 08:22:33 rti10 amd[3397]: first time load of map /etc/amd.net
succeeded
Jul 22 08:22:33 rti10 amd[3397]: /etc/amd.net mounted fstype toplvl on /net
Jul 22 08:22:33 rti10 oeeclslinuxrti: Installing Parallel Port Driver
Jul 22 08:22:33 rti10 oeeclslinuxrti: insmod: pp: no module by that name
found
Jul 22 08:22:34 rti10 oeeclslinuxrti: Using
/lib/modules/2.4.20-8/kernel/drivers/ieee1394/ieee1394.o
Jul 22 08:22:34 rti10 oeeclslinuxrti: insmod: a module named ieee1394
already exists
Jul 22 08:22:34 rti10 kernel: raw1394: /dev/raw1394 device initialized
Jul 22 08:22:34 rti10 oeeclslinuxrti: Using
/lib/modules/2.4.20-8/kernel/drivers/ieee1394/raw1394.o
Jul 22 08:22:34 rti10 oeeclslinuxrti: mknod: `/dev/pp0': File exists
Jul 22 08:22:34 rti10 rc: Starting oeeclslinuxrti: succeeded
Jul 22 08:22:34 rti10 sendmail: sendmail startup succeeded
Jul 22 08:22:34 rti10 sendmail: sm-client startup succeeded
Jul 22 08:22:35 rti10 gpm: gpm startup succeeded
Jul 22 08:22:37 rti10 httpd: httpd startup succeeded
Jul 22 08:22:38 rti10 canna: succeeded
Jul 22 08:22:38 rti10 crond: crond startup succeeded
Jul 22 08:22:40 rti10 kernel: lp0: using parport0 (polling).
Jul 22 08:22:40 rti10 kernel: lp0: console ready
Jul 22 08:22:40 rti10 modprobe: modprobe: Can't locate module char-major-188
Jul 22 08:22:40 rti10 last message repeated 15 times
Jul 22 08:22:40 rti10 cups: cupsd startup succeeded
Jul 22 08:22:41 rti10 xfs: xfs startup succeeded
Jul 22 08:22:41 rti10 anacron: anacron startup succeeded
Jul 22 08:22:41 rti10 atd: atd startup succeeded
Jul 22 08:22:42 rti10 xfs: ignoring font path element
/usr/X11R6/lib/X11/fonts/cyrillic (unreadable)
Jul 22 08:22:42 rti10 rc: Starting firstboot: succeeded
Jul 22 08:22:42 rti10 automount[3315]: attempting to mount entry /home/cls
Jul 22 08:22:42 rti10 rc: Starting mdc_misc: succeeded
Jul 22 08:22:42 rti10 login(pam_unix)[3649]: session opened for user cls by
LOGIN(uid=0)
Jul 22 08:22:42 rti10 automount[3315]: attempting to mount entry
/home/clshome
Jul 22 08:22:42 rti10 -- cls[3649]: LOGIN ON tty1 BY cls
Jul 22 08:22:49 rti10 gconfd (cls-3723): starting (version 2.2.0), pid 3723
user 'cls'
Jul 22 08:22:49 rti10 gconfd (cls-3723): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only config source
at position 0
Jul 22 08:22:49 rti10 gconfd (cls-3723): Resolved address
"xml:readwrite:/home/clshome/.gconf" to a writable config source at position
1
Jul 22 08:22:49 rti10 gconfd (cls-3723): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only config source at
position 2
Jul 22 08:22:55 rti10 kernel: ide-floppy driver 0.99.newide
Jul 22 08:22:55 rti10 kernel: hdc: ATAPI 54X CD-ROM drive, 128kB Cache,
UDMA(33)
Jul 22 08:22:55 rti10 kernel: Uniform CD-ROM driver Revision: 3.12
Jul 22 08:22:57 rti10 kernel: cdrom: This disc doesn't have any tracks I
recognize!
Jul 22 08:23:59 rti10 automount[3816]: expired /home/cls
Jul 22 08:24:01 rti10 su(pam_unix)[3815]: session opened for user root by
cls(uid=301)
On Thu, 2003-08-07 at 21:46, Kathy Frazier wrote:
> >if you can mail the top part of the dmidecode output (the part that has
> >the bios idents) the machine can trivially be added to the apm idle
> >blacklist.
>
> Is this in the message file? I didn't see anything with "DMI" in it. Is
> this what you are looking for? If not, please let me know.
dmidecode is an application that comes in the kernel-utils rpm that
dumps a bunch of BIOS information
>dmidecode is an application that comes in the kernel-utils rpm that
>dumps a bunch of BIOS information
Here you go, here's the top part. If you need anything else, let me know.
Regards,
Kathy Frazier
SMBIOS 2.3 present.
DMI 2.3 present.
56 structures occupying 1482 bytes.
DMI table at 0x000F0040.
Handle 0x0000
DMI type 0, 20 bytes.
BIOS Information Block
Vendor: Award Software, Inc.
Version: ASUS P4PE ACPI BIOS Revision 1006
Release: 07/15/2003
BIOS base: 0xF0000
ROM size: 448K
Capabilities:
Flags: 0x000000007FCBDE80
Handle 0x0001
DMI type 1, 25 bytes.
System Information Block
Vendor: System Manufacturer
Product: System Name
Version: System Version
Serial Number: EVAL
Handle 0x0002
DMI type 2, 8 bytes.
Board Information Block
Vendor: ASUSTeK Computer INC.
Product: P4PE
Version: REV 1.xx
Serial Number: xxxxxxxxxxx
Handle 0x0003
DMI type 3, 17 bytes.
Chassis Information Block
Vendor: Chassis Manufacture
Chassis Type: Tower
Version: Chassis Version
Serial Number: EVAL
Asset Tag: Asset-1234567890
Handle 0x0004
DMI type 4, 32 bytes.
Processor
Socket Designation: PGA 478
Processor Type: Central Processor
Processor Family:
Processor Manufacturer: GenuineIntel
Processor Version: Intel(R) Pentium(R) 4