Main changes this time
- Initial driver code for PCMCIA
- Initial driver code for ISAPnP
- Legacy support including VLB driver bits (mostly to test non PCI
cases)
- Replace IRQ masking awareness in core with a ->data_xfer method
- Use ->data_xfer to move IRQ masking, VLB sync and other chip
whackiness back *outside* of the core libata code.
- Simplex DMA is now supported
- Remove PCI quirk junk for IDE stuff (its buggy in places and a mess)
- Teach core PCI code about the IDE legacy mess in the PCI spec
- Merge with other libata changes to 2.6.16-rc2
- ARTOP driver now knows how to init Macintosh cards
- Initial netcell driver bits
- CMD64x support (except 640)
- Initial incomplete Cypress Alpha IDE
With the exception of HPA and serialize support its now pretty close to
a straight replacement for drivers/ide on x86 systems (and boxes using
PCI devices only). There is other stuff that wants improving still like
error recovery on CRC, but its getting close.
Please remember that functionality equivalence, and much cleaner code
doesn't mean less bugs yet, there is a *lot* of testing and hammering on
the code needed before it is production ready for switching.
http://zeniv.linux.org.uk/~alan/IDE
for 2.6.16-rc2 patches.
Alan
AC> http://zeniv.linux.org.uk/~alan/IDE
AC>
AC> for 2.6.16-rc2 patches.
Should I #define ATA_ENABLE_PATA by hand in include file to get PIIX4
PATA to wotk with the ata_piix driver, or should it just work?
--
Meelis Roos
On Llu, 2006-02-06 at 22:04 +0200, Meelis Roos wrote:
> AC> http://zeniv.linux.org.uk/~alan/IDE
> AC>
> AC> for 2.6.16-rc2 patches.
>
> Should I #define ATA_ENABLE_PATA by hand in include file to get PIIX4
> PATA to wotk with the ata_piix driver, or should it just work?
You should set that define. Actually I should do that by default in the
patch set. I will fix that.
Tried in Qemu with virtual PIIX3. Compiled in PIIX, OLDPIIX, MPIIX and
Generic. Enabled PATA support for libata in libata.h. Disabled
everything in ATA/IDE Kconfig menu.
ata1: PATA max PIO4 cmd 0x1F0 ctl 0x3F6 bmdma 0x0 irq 15
Unable to handle kernel NULL pointer dereference at virtual address 00000000
printing eip:
00000000
*pde = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<00000000>] Not tainted VLI
EFLAGS: 00000246 (2.6.16-rc2-PATA)
EIP is at 0x0
eax: c1268280 ebx: c12a88e0 ecx: c1268280 edx: c02fd2e0
esi: 0000003c edi: 00000001 ebp: c02ba272 esp: c1150cfc
ds: 007b es: 007b ss: 0068
Process swapper (pid: 1, threadinfo=c1150000 task=c114fa30)
Stack: <0>c0232b6c fc000000 c1150d9c 00000000 00000001 00000000 00000000 c12a88e0
c1268280 0000011a 00008000 c12ceb40 c1266408 c016cafb c12ceba0 c1266404
c12a88e0 0000003c c1266430 c12cf340 00000000 ffffffff c01bd61a ffffffff
Call Trace:
[<c0232b6c>] ata_device_add+0x34c/0xb00
[<c016cafb>] create_proc_entry+0x5b/0xd0
[<c01bd61a>] pci_get_subsys+0x6a/0xf0
[<c03478d5>] legacy_init+0x1d5/0x3b0
[<c0100311>] init+0x81/0x1e0
[<c0100290>] init+0x0/0x1e0
[<c0100bd5>] kernel_thread_helper+0x5/0x10
Code: Bad EIP value.
This seems to be from the generic code but I'm not sure. First I enabled only
PIIX (+ATA_ENABLE_PATA) but it failed to detect any ATA devices at all.
--
Meelis Roos
On Maw, 2006-02-07 at 10:43 +0200, Meelis Roos wrote:
> Tried in Qemu with virtual PIIX3. Compiled in PIIX, OLDPIIX, MPIIX and
> Generic. Enabled PATA support for libata in libata.h. Disabled
> everything in ATA/IDE Kconfig menu.
>
> ata1: PATA max PIO4 cmd 0x1F0 ctl 0x3F6 bmdma 0x0 irq 15
> Unable to handle kernel NULL pointer dereference at virtual address 00000000
> printing eip:
Very strange trace indeed. I'll take a look at this. At least since it
came from Qemu I should be able to "build" a suitable PC to match yours.
Original Intel PIIX devices are handled by "OLDPIIX" (0x8086, 0x1230).
The later ones by ata_piix. The only oddity I see is that you have no
PCI bus mastering address base assigned (bmdma)
Alan
> Very strange trace indeed. I'll take a look at this. At least since it
> came from Qemu I should be able to "build" a suitable PC to match yours.
>
> Original Intel PIIX devices are handled by "OLDPIIX" (0x8086, 0x1230).
> The later ones by ata_piix. The only oddity I see is that you have no
> PCI bus mastering address base assigned (bmdma)
I also tried VMWare 5.5 that emulated PIIX4. It works if I only put
ata_piix driver in. With the same kernel that Qemu gets the error,
VMWare gets another oops during generic ide initialisation. I relooked
and found that I have both generic PCI ide and generic ISA ide drivers
compiled in, so I disabled them and it works using ata_piix (with PATA
and ATAPI enabled). Even ATAPI cdrom worked as the root partition.
But, the different oops that I got in vmware with generic ide:
http://www.cs.ut.ee/~mroos/atacrash.png
--
Meelis Roos ([email protected])
Meelis Roos wrote:
>> Very strange trace indeed. I'll take a look at this. At least since it
>> came from Qemu I should be able to "build" a suitable PC to match yours.
>>
>> Original Intel PIIX devices are handled by "OLDPIIX" (0x8086, 0x1230).
>> The later ones by ata_piix. The only oddity I see is that you have no
>> PCI bus mastering address base assigned (bmdma)
>
>
> I also tried VMWare 5.5 that emulated PIIX4. It works if I only put
> ata_piix driver in. With the same kernel that Qemu gets the error,
> VMWare gets another oops during generic ide initialisation. I relooked
> and found that I have both generic PCI ide and generic ISA ide drivers
> compiled in, so I disabled them and it works using ata_piix (with PATA
> and ATAPI enabled). Even ATAPI cdrom worked as the root partition.
>
> But, the different oops that I got in vmware with generic ide:
> http://www.cs.ut.ee/~mroos/atacrash.png
>
I was under the impression that libata pata and ide drivers are mutually
exclusive. You're not supposed to be using both at the same time
unless they're for completely different controllers.
Maybe this should be in the config to auto unselect the other equivilant
driver (+generic) when either the libata or ide one is user selected, or
at least mentioned in the help for future testers.
Since libata is loaded after regular ide, having generic ide compiled in
is a problem. Generic drivers should be loaded after all specific
compiled in drivers and generic libata should override generic ide.
This seems to be very complicated if both interfaces are to be around at
the same time for a while. Maybe it should just be mentioned in the
Help for libata drivers that it's best to just disable all regular ide
drivers when using libata pata ones.
> I was under the impression that libata pata and ide drivers are mutually
> exclusive. You're not supposed to be using both at the same time unless
> they're for completely different controllers.
I _was_ only using libata. The two generic (PCI and ISA) IDE drivers are
in libata too in addition to the old ide code.
--
Meelis Roos ([email protected])
On Maw, 2006-02-07 at 13:10 +0200, Meelis Roos wrote:
> I also tried VMWare 5.5 that emulated PIIX4. It works if I only put
> ata_piix driver in. With the same kernel that Qemu gets the error,
> VMWare gets another oops during generic ide initialisation. I relooked
> and found that I have both generic PCI ide and generic ISA ide drivers
> compiled in, so I disabled them and it works using ata_piix (with PATA
> and ATAPI enabled). Even ATAPI cdrom worked as the root partition.
Ok there is a resource handling bug somewhere in the generic case that
needs fixing I have yet to find. Also some mishandling of devices with
bmdma not enabled which kills Qemu. I've just been fixing the latter and
also adding CFA awareness. I'll take a look at the resource code next.
Alan
On Maw, 2006-02-07 at 11:38 +0000, Alan Cox wrote:
> Ok there is a resource handling bug somewhere in the generic case that
> needs fixing I have yet to find. Also some mishandling of devices with
> bmdma not enabled which kills Qemu. I've just been fixing the latter and
> also adding CFA awareness. I'll take a look at the resource code next.
I've put up a -ide2 patch at
http://zeniv.linux.org.uk/~alan/IDE
This
- cleans up old pci_module_init users
- Should fix the crashes people saw when bmdma is zero
- Adds the netcell driver (nothing clever in it yet as the chip
does all the thinking)
- Fixed probe ordering
- Added resource management to the pata_legacy driver
- Other minor oddments (Allow CFA etc)
Should help fix some of the crashes reported on startup.
I did however forget to change the default ATA_ENABLE_PATA setting
Alan
> I've put up a -ide2 patch at
>
> http://zeniv.linux.org.uk/~alan/IDE
This time a report from an Intel ICH5 machine with 1 PATA disk and 1
PATA cdrom, worked fine before. Now I got anb oops with previous kernel
and the dmesg below ith current kernel (recoreded with netconsole). The
previous fauls was also during partition table reading. This is fully
reproducible, tried 3 times.
ata1: dev 0 ATA-6, max UDMA/100, 156301488 sectors: LBA
ata1: dev 0 configured for UDMA/100
scsi0 : ata_piix
Vendor: ATA Model: WDC WD800BB-22HE Rev: 14.0
Type: Direct-Access ANSI SCSI revision: 05
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x24C8 irq 15
ata2: dev 0 ATAPI, max UDMA/33
ata2: dev 0 configured for UDMA/33
scsi1 : ata_piix
Vendor: _NEC Model: DVD_RW ND-3540A Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 05
PCI: Found IRQ 11 for device 0000:00:1f.2
PCI: Sharing IRQ 11 with 0000:00:1d.2
PCI: Sharing IRQ 11 with 0000:00:1f.1
ata3: SATA max UDMA/133 cmd 0x24F8 ctl 0x2812 bmdma 0x24D0 irq 11
ata4: SATA max UDMA/133 cmd 0x2800 ctl 0x2816 bmdma 0x24D8 irq 11
ata3: SATA port has no device.
scsi2 : ata_piix
ata4: SATA port has no device.
scsi3 : ata_piix
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
Unknown interrupt or fault at EIP 00000286 00000060 c0112acd
sda: Write Protect is off
SCSI device sda: drive cache: write back
sda:Unknown interrupt or fault at EIP 00000246 00000060 c010162b
--
Meelis Roos ([email protected])
> I've put up a -ide2 patch at
>
> http://zeniv.linux.org.uk/~alan/IDE
Success on a slightly newer VIA KT133 mainboard with Duron 1200, Seagate
40G disk and CDROM on secondary ide channel, 80 pin cable. It also
survived reading the HDD with dd into devnull. CDROM was used as the
root filesystem, successfully. Nothing on primary IDE channel.
PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
ata1: PATA max UDMA/66 cmd 0x1F0 ctl 0x3F6 bmdma 0xD000 irq 14
ATA: abnormal status 0x8 on port 0x1F7
ata1: disabling port
scsi0 : pata_via
ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xD008 irq 15
ata2: dev 0 ATA-6, max UDMA/100, 78165360 sectors: LBA48
ata2: dev 1 ATAPI, max MWDMA2
via_do_set_mode: Mode=12 ast broken=N udma=66 mul=2
via_do_set_mode: Mode=68 ast broken=N udma=66 mul=2
ata2: dev 0 configured for UDMA/66
via_do_set_mode: Mode=12 ast broken=N udma=66 mul=2
via_do_set_mode: Mode=34 ast broken=N udma=66 mul=2
ata2: dev 1 configured for MWDMA2
scsi1 : pata_via
Vendor: ATA Model: ST340014A Rev: 3.04
Type: Direct-Access ANSI SCSI revision: 05
Vendor: SAMSUNG Model: CD-ROM SC-148C Rev: B100
Type: CD-ROM ANSI SCSI revision: 05
SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
sd 1:0:0:0: Attached scsi disk sda
sr0: scsi3-mmc drive: 8x/48x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sd 1:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:1:0: Attached scsi generic sg1 type 5
--
Meelis Roos ([email protected])
> I've put up a -ide2 patch at
>
> http://zeniv.linux.org.uk/~alan/IDE
Tried it on a Intel 815 mainboard with ICH2, 1 IDE disk and 1 Sony CDROM
that had problems before (DMA timeout, PIO only, since about 2.4.21).
Got the following panic. First it paused several seconds after
scsi1 : ata_piix
and then gave the panic + double fault.
ata1: PATA max UDMA/66 cmd 0x1F0 ctl 0x3F6 bmdma 0xFFA0 irq 14
ata1: dev 0 ATA-5, max UDMA/100, 40132503 sectors: LBA
ata1: dev 0 configured for UDMA/66
scsi0 : ata_piix
Vendor: ATA Model: QUANTUM FIREBALL Rev: A1Y.
Type: Direct-Access ANSI SCSI revision: 05
ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xFFA8 irq 15
ata2: dev 0 ATAPI, max UDMA/33
ata2: dev 0 configured for UDMA/33
scsi1 : ata_piix
ata2: command 0xa0 timeout, stat 0xd0 host_stat 0x24
ata2: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
SCSI device sda: 40132503 512-byte hdwr sectors (20548 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
int3: 0000 [#1]
CPU: 0
EIP: 0060:[<c0148711>] Not tainted VLI
EFLAGS: 00000282 (2.6.16-rc2-PATA)
EIP is at get_super+0x1/0x80
eax: c146d040 ebx: c146d040 ecx: dfe83db8 edx: 00000001
esi: 00000000 edi: 00000000 ebp: 00000000 esp: dfe83db4
ds: 007b es: 007b ss: 0068
Process swapper (pid: 1, threadinfo=dfe83000 task=dfe82a30)
Stack: <0>00000000 c01441e9 c146d040 00000000 c01ac931 c146d040 dfc97ec0 c016ff4e
c01ed05e dfcbf120 c146d040 dfc97ec0 c02b7153 dfe83e1c c146d040 dfc97ec0
00000000 00000000 c0149a31 c146d04c 00000000 dfe83ea0 c146d040 00000001
Call Trace:
[<c01441e9>] fsync_bdev+0x9/0x30
[<c01ac931>] invalidate_partition+0x21/0x40
[<c016ff4e>] rescan_partitions+0x2e/0x210
[<c01ed05e>] get_device+0xe/0x20
[<c02b7153>] sd_open+0x43/0x100
[<c0149a31>] do_open+0x201/0x280
[<c0149b53>] blkdev_get+0x53/0x60
[<c0170207>] register_disk+0xd7/0xf0
[<c01ac492>] add_disk+0x32/0x40
[<c01ac420>] exact_match+0x0/0x10
[<c01ac450>] exact_lock+0x0/0x10
[<c02b892f>] sd_probe+0x21f/0x300
[<c01ee6d0>] __driver_attach+0x0/0x60
[<c01ee608>] driver_probe_device+0x38/0xa0
[<c01ee72a>] __driver_attach+0x5a/0x60
[<c01edcf8>] bus_for_each_dev+0x38/0x60
[<c01ee4e1>] driver_attach+0x11/0x20
[<c01ee6d0>] __driver_attach+0x0/0x60
[<c01edfca>] bus_add_driver+0x5a/0x100
[<c01eea10>] klist_devices_get+0x0/0x10
[<c0100311>] init+0x81/0x1e0
[<c0100290>] init+0x0/0x1e0
[<c0100bd5>] kernel_thread_helper+0x5/0x10
Code: 14 00 00 00 89 44 24 58 8b 44 24 2c 89 44 24 5c 8b 44 24 7c e8 01 d1 06 00 85 c0 74 c7 bb f2 ff ff ff eb c0 8d b6 00 00 00 00 56 <85> c0 53 89 c6 75 08 31 db 89 d8 5b 5e c3 90 8b 1d 90 6f 37 c0
<0>Kernel panic - not syncing: Attempted to kill init!
double fault, gdt at c036f000 [255 bytes]
double fault, tss at c0370000
eip = c011270a, esp = dfe83ce0
eax = 00000000, ebx = 00000000, ecx = c043d280, edx = 00000000
esi = dfe82a30, edi = 00000000
--
Meelis Roos ([email protected])
On Tue, 7 Feb 2006, Meelis Roos wrote:
[..]
> SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
> sda: Write Protect is off
> SCSI device sda: drive cache: write back
> SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
> Unknown interrupt or fault at EIP 00000286 00000060 c0112acd
> sda: Write Protect is off
> SCSI device sda: drive cache: write back
> sda:Unknown interrupt or fault at EIP 00000246 00000060 c010162b
I'm allways confused to see this kind messages output with duplicated
SCSI subsystem initialization device reports in kernel logs.
It it not kind of bug ?
Usualy information about single SCSI device takes:
SCSI device sdb: 71687340 512-byte hdwr sectors (36704 MB)
sdb: Write Protect is off
sdb: Mode Sense: cb 00 00 08
SCSI device sdb: drive cache: write back
SCSI device sdb: 71687340 512-byte hdwr sectors (36704 MB)
sdb: Write Protect is off
sdb: Mode Sense: cb 00 00 08
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 sdb3
sd 0:0:3:0: Attached scsi disk sdb
Vendor: MAXTOR Model: ATLAS10K5_73WLS Rev: JNZH
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:6:0: Tagged Queuing enabled. Depth 4
target0:0:6: Beginning Domain Validation
target0:0:6: wide asynchronous
target0:0:6: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 127)
target0:0:6: Domain Validation skipping write tests
target0:0:6: Ending Domain Validation
.. 18 lines (14 after remove duplicated lines). Is it not to much ?
Best IMO will write only information like "found/initialize device <foo>;
</phisical/path>" like in Solaris. All other detailed information can be
IMO moved to sysfs (informations about partition/slices are now
in sysfs).
kloczek
--
-----------------------------------------------------------
*Ludzie nie maj? problem?w, tylko sobie sami je stwarzaj?*
-----------------------------------------------------------
Tomasz K?oczko, sys adm @zie.pg.gda.pl|*e-mail: [email protected]*
> I've put up a -ide2 patch at
>
> http://zeniv.linux.org.uk/~alan/IDE
Tried also on a Intel 7221 with 1 PATA cdrom and 4 SATA disks attached
to onboard ICH7 SATA (PIIX mode, not AHCI). Fails basically the same as
the ICH5 I reported earlier (crash on partition table reading) but the
output is much more verbose:
Linux version 2.6.16-rc2-PATA (mroos@rhn) (gcc version 4.0.3 20060128 (prerelease) (Debian 4.0.2-8)) #7 Tue Feb 7 18:20:51 EET 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f7e557a (usable)
BIOS-e820: 000000003f7e557a - 000000003f7f0000 (reserved)
BIOS-e820: 000000003f7f0000 - 000000003f7fe000 (ACPI data)
BIOS-e820: 000000003f7fe000 - 000000003f800000 (ACPI NVS)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
DMI 2.3 present.
Allocating PCI resources starting at 40000000 (gap: 3f800000:c0000000)
Built 1 zonelists
Kernel command line: root=/dev/sr0 init=/bin/bash libata.atapi_enabled=1 vga=0xf07 [email protected]/eth0,[email protected]/00:03:47:a4:64:d5 BOOT_IMAGE=vmlinuz
netconsole: local port 1980
netconsole: local IP 192.168.74.66
netconsole: interface eth0
netconsole: remote port 1975
netconsole: remote IP 192.168.74.17
netconsole: remote ethernet address 00:03:47:a4:64:d5
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0438000 soft=c0439000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2992.802 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x60
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 905580k/917504k available (2174k kernel code, 11496k reserved, 856k data, 240k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5992.59 BogoMIPS (lpj=29962987)
Mount-cache hash table entries: 512
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4
PCI: Using configuration type 1
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f5610
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x629a, dseg 0xf0000
PnPBIOS: Missing SMALL_TAG_ENDDEP tag
PnPBIOS: Missing SMALL_TAG_ENDDEP tag
PnPBIOS: Missing SMALL_TAG_ENDDEP tag
PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/2640] at 0000:00:1f.0
PCI: Found IRQ 7 for device 0000:00:1f.1
PCI: Sharing IRQ 7 with 0000:00:1d.2
PCI: Sharing IRQ 7 with 0000:01:03.0
pnp: 00:0c: ioport range 0x5a0-0x5a7 has been reserved
pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0d: ioport range 0xcf8-0xcff could not be reserved
pnp: 00:0d: ioport range 0x480-0x4bf has been reserved
pnp: 00:0d: ioport range 0x800-0x87f has been reserved
pnp: 00:0d: ioport range 0x540-0x55f has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:02:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: e000-efff
MEM window: dff00000-dfffffff
PREFETCH window: disabled.
PCI: Found IRQ 10 for device 0000:00:1c.0
PCI: Sharing IRQ 10 with 0000:00:02.0
apm: BIOS not found.
io scheduler noop registered
io scheduler anticipatory registered (default)
0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 6.3.9-k2-NAPI
Copyright (c) 1999-2005 Intel Corporation.
PCI: Found IRQ 7 for device 0000:01:03.0
PCI: Sharing IRQ 7 with 0000:00:1d.2
PCI: Sharing IRQ 7 with 0000:00:1f.1
e1000: 0000:01:03.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:4b:5f:68
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
pcnet32.c:v1.31c 01.Nov.2005 [email protected]
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ThunderLAN driver v1.15
TLAN: 0 devices installed, PCI: 0 EISA: 0
ata1: dev 0 ATAPI, max UDMA/33
ata1: dev 0 configured for UDMA/33
scsi0 : ata_piix
Vendor: TSSTcorp Model: CD/DVDW SH-W162C Rev: TS10
Type: CD-ROM ANSI SCSI revision: 05
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xFFF8 irq 15
ATA: abnormal status 0x7F on port 0x177
ata2: disabling port
scsi1 : ata_piix
PCI: Found IRQ 11 for device 0000:00:1f.2
PCI: Sharing IRQ 11 with 0000:00:1d.1
PCI: Sharing IRQ 11 with 0000:00:1f.3
ata3: SATA max UDMA/133 cmd 0xDF80 ctl 0xDF02 bmdma 0xDD80 irq 11
ata4: SATA max UDMA/133 cmd 0xDE80 ctl 0xDE02 bmdma 0xDD88 irq 11
ata3: dev 0 ATA-7, max UDMA/133, 586072368 sectors: LBA48
ata3: dev 1 ATA-7, max UDMA/133, 586072368 sectors: LBA48
ata3: dev 0 configured for UDMA/133
ata3: dev 1 configured for UDMA/133
scsi2 : ata_piix
ata4: dev 0 ATA-7, max UDMA/133, 586072368 sectors: LBA48
ata4: dev 1 ATA-7, max UDMA/133, 586072368 sectors: LBA48
ata4: dev 0 configured for UDMA/133
ata4: dev 1 configured for UDMA/133
scsi3 : ata_piix
Vendor: ATA Model: ST3300831AS Rev: 3.03
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: ST3300831AS Rev: 3.03
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: ST3300831AS Rev: 3.03
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: ST3300831AS Rev: 3.03
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
sda:<0>int3: 0000 [#1]
CPU: 0
EIP: 0060:[<c01016e5>] Not tainted VLI
EFLAGS: 00000246 (2.6.16-rc2-PATA)
EIP is at mwait_idle+0x25/0x30
eax: 00000000 ebx: c03f6000 ecx: 00000000 edx: 00000000
esi: c03f6008 edi: c03f3800 ebp: 00480007 esp: c03f6fe4
ds: 007b es: 007b ss: 0068
Process swapper (pid: 0, threadinfo=c03f6000 task=c0372200)
Stack: <0>feff0000 00039100 c010167c c03f73f2 c043ae20 00020800 c0100199
Call Trace:
[<c010167c>] cpu_idle+0x1c/0x60
[<c03f73f2>] start_kernel+0x1f2/0x240
Code: 90 90 90 90 90 90 56 53 fb bb 00 f0 ff ff 21 e3 8d 73 08 eb 16 90 31 c9 89 f0 89 ca 0f 01 c8 8b 43 08 0000000b [<c0114b06>]
printk+0x13/0x20
die+0x1eb/0x1f0
fixup_exception+0x18/0x60
[<c01037ba>] do_int3+0x5a/0x70
[<c031f0fe>] int3+0x1e/0x30
[<c01016e5>] mwait_idle+0x25/0x30
[<c010167c>] cpu_idle+0x1c/0x60
[<c03f73f2>] start_kernel+0x1f2/0x240
Code: c0 01 c3 b8 58 89 41 00 e8 24 2c 0a 00 a1 68 d2 43 c0 8d 04 80 43 8d 04 80 8d 04 80 c1 e0 03 39 c3 7c d6 e8 89 ad 00 00 fb 31 db <8d> b6 00 00 00 00 89 d8 ff 15 6c d2 43 c0 01 c3 b8 58 89 41 00
<0>Kernel panic - not syncing: Attempted to kill the idle task!
<0>divide error: 0000 [#3]
CPU: 0
EIP: 0060:[<c010a78b>] Not tainted VLI
EFLAGS: 00000293 (2.6.16-rc2-PATA)
EIP is at delay_tsc+0xb/0x20
eax: c6d80e94 ebx: 002db862 ecx: c6cc17c4 edx: 00000027
esi: c0372200 edi: 00000000 ebp: 0000000b esp: c03f6db0
ds: 007b es: 007b ss: 0068
Process swapper (pid: 0, threadinfo=c03f6000 task=c0372200)
Stack: <0>00000002 c01b5309 c0112724 c03f6dcc c03f6000 c0114b06 c0336a88 00000206
00000000 c033478f c0113573 c0343179 c03f6df0 00000000 00000206 00000000
c033478f c010349b c03f6edc c03f6edc c010edd8 c03f6edc c033478f 00000000
Call Trace:
[<c01b5309>] __delay+0x9/0x10
[<c0112724>] panic+0xd4/0xf0
[<c0114b06>] do_exit+0x4f6/0x6e0
[<c0113573>] printk+0x13/0x20
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
[<c01036c0>] do_divide_error+0x0/0xa0<0>Kernel panic - not syncing: Attempted to kill the idle task!
<0>divide error: 0000 [#4]
CPU: 0
EIP: 0060:[<c010a789>] Not tainted VLI
EFLAGS: 00000287 (2.6.16-rc2-PATA)
EIP is at delay_tsc+0x9/0x20
eax: 00028a3f ebx: 002db862 ecx: c89e2c2e edx: 00000027
esi: c0372200 edi: 00000000 ebp: 0000000b esp: c03f6c50
ds: 007b es: 007b ss: 0068
Process swapper (pid: 0, threadinfo=c03f6000 task=c0372200)
Stack: <0>00000005 c01b5309 c0112724 c03f6c6c c03f6000 c0114b06 c0336a88 00000206
00000000 c033478f c0113573 c0343179 c03f6c90 00000000 00000206 00000000
c033478f c010349b c03f6d7c c03f6d7c c010edd8 c03f6d7c c033478f 00000000
Call Trace:
[<c01b5309>] __delay+0x9/0x10
[<c0112724>] panic+0xd4/0xf0
[<c0114b06>] do_exit+0x4f6/0x6e0
[<c0113573>] printk+0x13/0x20
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
[<c01036c0>] do_divide_error+0x0/0xa0
[<c010374e>] do_divide_error+0x8e/0xa0
[<c010a78b>] delay_tsc+0xb/0x20
[<c029b270>] write_msg+0x0/0x50
[<c0112847>] __call_console_drivers+0x37/0x50
[<c01134df>] vprintk+0x26f/0x2f0
[<c0112847>] __call_console_drivers+0x37/0x50
[<c0102a0f>] error_code+0x4f/0x60
[<c010a78b>] delay_tsc+0xb/0x20
[<c01b5309>] __delay+0x9/0x10
[<c0112724>] panic+0xd4/0xf0
[<c0114b06>] do_exit+0x4f6/0x6e0
[<c0113573>] printk+0x13/0x20
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
[<c01036c0>] do_divide_error+0x0/0xa0
[<c010374e>] do_divide_error+0x8e/0xa0
[<c011270a>] panic+0xba/0xf0
[<c0112847>] __call_console_drivers+0x37/0x50
[<c01134df>] vprintk+0x26f/0x2f0
[<c0112847>] __call_console_drivers+0x37/0x50
[<c0102a0f>] error_code+0x4f/0x60
[<c011270a>] panic+0xba/0xf0
[<c0114b06>] do_exit+0x4f6/0x6e0
[<c0113573>] printk+0x13/0x20
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
[<c01037ba>] do_int3+0x5a/0x70
[<c031f0fe>] int3+0x1e/0x30
[<c01016e5>] mwait_idle+0x25/0x30
[<c010167c>] cpu_idle+0x1c/0x60
[<c03f73f2>] start_kernel+0x1f2/0x240
Code: ea 0a 01 44 24 08 11 54 24 0c 8b 44 24 08 8b 54 24 0c 83 c4 10 5b 5e 5f 5d c3 90 8d b4 26 00 00 00 00 53 89 c3 0f 31 c1 31 39 f6 5b 8d 00 bc
<0>Kernel panic - not syncing: Attempted to kill the idle task!
<0>divide error: 0000 [#5]
CPU: 0
EIP: 0060:[<c010a78b>] Not tainted VLI
EFLAGS: 00000297 (2.6.16-rc2-PATA)
EIP is at delay_tsc+0xb/0x20
eax: ca695e98 ebx: 002db862 ecx: ca4ebc8a edx: 00000027
esi: c0372200 edi: 00000000 ebp: 0000000b esp: c03f6af0
ds: 007b es: 007b ss: 0068
Process swapper (pid: 0, threadinfo=c03f6000 task=c0372200)
Stack: <0>00000003 c01b5309 c0112724 c03f6b0c c03f6000 c0114b06 c0336a88 00000206
00000000 c033478f c0113573 c0343179 c03f6b30 00000000 00000206 00000000
c033478f c010349b c03f6c1c c03f6c1c c010edd8 c03f6c1c c033478f 00000000
Call Trace:
[<c01b5309>] __delay+0x9/0x10
[<c0112724>] panic+0xd4/0xf0
[<c0114b06>] do_exit+0x4f6/0x6e0
[<c0113573>] printk+0x13/0x20
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
[<c01036c0>] do_divide_error+0x0/0xa0
[<c0112847>] __call_console_drivers+0x37/0x50
[<c01134df>] vprintk+0x26f/0x2f0
[<c0112847>] __call_console_drivers+0x37/0x50
[<c0102a0f>] error_code+0x4f/0x60
[<c010a78b>] delay_tsc+0xb/0x20
[<c01b5309>] __delay+0x9/0x10
[<c0112724>] panic+0xd4/0xf0
[<c0114b06>] do_exit+0x4f6/0x6e0
[<c0113573>] printk+0x13/0x20
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
[<c01036c0>] do_divide_error+0x0/0xa0
[<c010374e>] do_divide_error+0x8e/0xa0
[<c011270a>] panic+0xba/0xf0
[<c0112847>] __call_console_drivers+0x37/0x50
[<c01134df>] vprintk+0x26f/0x2f0
[<c0112847>] __call_console_drivers+0x37/0x50
[<c0102a0f>] error_code+0x4f/0x60
[<c011270a>] panic+0xba/0xf0
[<c0114b06>] do_exit+0x4f6/0x6e0
[<c0113573>] printk+0x13/0x20
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
[<c01037ba>] do_int3+0x5a/0x70
[<c031f0fe>] int3+0x1e/0x30
[<c01016e5>] mwait_idle+0x25/0x30
[<c010167c>] cpu_idle+0x1c/0x60
[<c03f73f2>] start_kernel+0x1f2/0x240
Code: 01 44 24 08 11 54 24 0c 8b 44 24 08 8b 54 24 0c 83 c4 10 5b 5e 5f 5d c3 90 8d b4 26 00 00 00 00 53 89 c3 0f 31 89 c1 f3 90 0f 31 <29> 39 f6 c3 b6 00 00
<0>Kernel panic - not syncing: Attempted to kill the idle task!
<0>divide error: 0000 [#6]
CPU: 0
EIP: 0060:[<c010a78b>] Not tainted VLI
EFLAGS: 00000293 (2.6.16-rc2-PATA)
EIP is at delay_tsc+0xb/0x20
eax: cc320671 ebx: 002db862 ecx: cc2d0bd3 edx: 00000027
esi: c0372200 edi: 00000000 ebp: 0000000b esp: c03f6990
ds: 007b es: 007b ss: 0068
Process swapper (pid: 0, threadinfo=c03f6000 task=c0372200)
Stack: <0>00000000 c01b5309 c0112724 c03f69ac c03f6000 c0114b06 c0336a88 00000206
00000000 c033478f c0113573 c0343179 c03f69d0 00000000 00000206 00000000
c033478f c010349b c03f6abc c03f6abc c010edd8 c03f6abc c033478f 00000000
Call Trace:
[<c01b5309>] __delay+0x9/0x10
[<c0112724>] panic+0xd4/0xf0
[<c0114b06>] do_exit+0x4f6/0x6e0
[<c0113573>] printk+0x13/0x20
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
[<c01036c0>] do_divide_error+0x0/0xa0
[<c010374e>] do_divide_error+0x8e/0xa0
[<c010a78b>] delay_tsc+0xb/0x20
[<c029b270>] write_msg+0x0/0x50
[<c0112847>] __call_console_drivers+0x37/0x50
[<c01134df>] vprintk+0x26f/0x2f0
[<c0112847>] __call_console_drivers+0x37/0x50
[<c0102a0f>] error_code+0x4f/0x60
[<c010a78b>] delay_tsc+0xb/0x20
[<c01b5309>] __delay+0x9/0x10
[<c0112724>] panic+0xd4/0xf0
[<c0114b06>] do_exit+0x4f6/0x6e0
[<c0113573>] printk+0x13/0x20
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
[<c01036c0>] do_divide_error+0x0/0xa0
[<c010374e>] do_divide_error+0x8e/0xa0
[<c010a789>] delay_tsc+0x9/0x20
[<c029b270>] write_msg+0x0/0x50
[<c0112847>] __call_console_drivers+0x37/0x50
[<c01134df>] vprintk+0x26f/0x2f0
[<c0112847>] __call_console_drivers+0x37/0x50
[<c0102a0f>] error_code+0x4f/0x60
delay_tsc+0x9/0x20
[<c01b5309>]
[<c0112724>]
[<c0114b06>] do_exit+0x4f6/0x6e0
printk+0x13/0x20
[<c010349b>]
[<c010edd8>] fixup_exception+0x18/0x60
do_divide_error+0x0/0xa0
[<c010374e>] do_divide_error+0x8e/0xa0
delay_tsc+0xb/0x20 [<c029b270>]
[<c0112847>] __call_console_drivers+0x37/0x50
vprintk+0x26f/0x2f0
[<c0112847>] __call_console_drivers+0x37/0x50
error_code+0x4f/0x60
[<c010a78b>]
[<c01b5309>] __delay+0x9/0x10
panic+0xd4/0xf0
[<c0114b06>]
[<c0113573>]
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
do_divide_error+0x0/0xa0
[<c010374e>] do_divide_error+0x8e/0xa0
panic+0xba/0xf0
[<c0112847>]
[<c01134df>] vprintk+0x26f/0x2f0
__call_console_drivers+0x37/0x50
error_code+0x4f/0x60
[<c011270a>]
[<c0113573>]
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>]
[<c01037ba>] do_int3+0x5a/0x70
int3+0x1e/0x30
[<c01016e5>]
[<c010167c>]
[<c03f73f2>]
Code: 44 11 8b 08 24 c4 10 5b 5e 5f 5d c3 90 8d b4 26 00 00 00 00 53 89 c3 0f 31 89 c1 f3 90 0f 31 c8 72 c3 8d 00 00 27 00 <0>Kernel panic - not syncing: Attempted to kill the idle task!
<0>divide error: 0000 [#7]
CPU: 0
EIP: 0060:[<c010a78b>] Not tainted VLI
EFLAGS: 00000283 (2.6.16-rc2-PATA)
EIP is at delay_tsc+0xb/0x20
eax: cdfaae61 ebx: 002db862 ecx: cdd5de47 edx: 00000027
esi: c0372200 edi: 00000000 ebp: 0000000b esp: c03f6830
ds: 007b es: 007b ss: 0068
Process swapper (pid: 0, threadinfo=c03f6000 task=c0372200)
Stack: <0>00000000 c01b5309 c0112724 c03f684c c03f6000 c0114b06 c0336a88 00000206
00000000 c033478f c0113573 c0343179 c03f6870 00000000 00000206 00000000
c033478f c010349b c03f695c c03f695c c010edd8 c03f695c c033478f 00000000
Call Trace:
[<c01b5309>] __delay+0x9/0x10
[<c0112724>] panic+0xd4/0xf0
[<c0114b06>] do_exit+0x4f6/0x6e0
[<c0113573>] printk+0x13/0x20
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
[<c01036c0>] do_divide_error+0x0/0xa0
[<c010374e>] do_divide_error+0x8e/0xa0
[<c010a78b>] delay_tsc+0xb/0x20
[<c029b270>] write_msg+0x0/0x50
[<c0112847>] __call_console_drivers+0x37/0x50
[<c01134df>] vprintk+0x26f/0x2f0
[<c0112847>] __call_console_drivers+0x37/0x50
[<c0102a0f>] error_code+0x4f/0x60
[<c010a78b>] delay_tsc+0xb/0x20
[<c01b5309>] __delay+0x9/0x10
[<c0112724>] panic+0xd4/0xf0
[<c0114b06>] do_exit+0x4f6/0x6e0
[<c0113573>] printk+0x13/0x20
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
[<c01036c0>] do_divide_error+0x0/0xa0
[<c010374e>] do_divide_error+0x8e/0xa0
[<c010a78b>] delay_tsc+0xb/0x20
[<c029b270>] write_msg+0x0/0x50
[<c0112847>] __call_console_drivers+0x37/0x50
[<c01134df>] vprintk+0x26f/0x2f0
[<c0112847>] __call_console_drivers+0x37/0x50
[<c0102a0f>] error_code+0x4f/0x60
[<c010a78b>] delay_tsc+0xb/0x20
[<c01b5309>] __delay+0x9/0x10
[<c0112724>] panic+0xd4/0xf0
[<c0114b06>] do_exit+0x4f6/0x6e0
[<c0113573>] printk+0x13/0x20
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
[<c01036c0>] do_divide_error+0x0/0xa0
[<c010374e>] do_divide_error+0x8e/0xa0
[<c010a789>] delay_tsc+0x9/0x20
[<c029b270>] write_msg+0x0/0x50
[<c0112847>] __call_console_drivers+0x37/0x50
[<c01134df>] vprintk+0x26f/0x2f0
[<c0112847>] __call_console_drivers+0x37/0x50
[<c0102a0f>] error_code+0x4f/0x60
[<c010a789>] delay_tsc+0x9/0x20
[<c01b5309>] __delay+0x9/0x10
[<c0112724>] panic+0xd4/0xf0
[<c0114b06>] do_exit+0x4f6/0x6e0
[<c0113573>] printk+0x13/0x20
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
[<c01036c0>] do_divide_error+0x0/0xa0
[<c010374e>] do_divide_error+0x8e/0xa0
[<c010a78b>] delay_tsc+0xb/0x20
[<c029b270>] write_msg+0x0/0x50
[<c0112847>] __call_console_drivers+0x37/0x50
[<c01134df>] vprintk+0x26f/0x2f0
[<c0112847>] __call_console_drivers+0x37/0x50
[<c0102a0f>] error_code+0x4f/0x60
[<c010a78b>] delay_tsc+0xb/0x20
[<c01b5309>] __delay+0x9/0x10
[<c0112724>] panic+0xd4/0xf0
[<c0114b06>] do_exit+0x4f6/0x6e0
[<c0113573>] printk+0x13/0x20
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
[<c01036c0>] do_divide_error+0x0/0xa0
[<c010374e>] do_divide_error+0x8e/0xa0
[<c011270a>] panic+0xba/0xf0
[<c0112847>] __call_console_drivers+0x37/0x50
[<c01134df>] vprintk+0x26f/0x2f0
[<c0112847>] __call_console_drivers+0x37/0x50
[<c0102a0f>] error_code+0x4f/0x60
[<c011270a>] panic+0xba/0xf0
[<c0114b06>] do_exit+0x4f6/0x6e0
[<c0113573>] printk+0x13/0x20
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
[<c01037ba>] do_int3+0x5a/0x70
[<c031f0fe>] int3+0x1e/0x30
[<c01016e5>] mwait_idle+0x25/0x30
[<c010167c>] cpu_idle+0x1c/0x60
[<c03f73f2>] start_kernel+0x1f2/0x240
Code: 01 44 24 08 11 54 24 0c 8b 44 24 08 8b 54 24 0c 83 c4 10 5b 5e 5f 5d 90 8d 26 00 0f f3 <29> d8 5b c3 b6 00 27 00
<0>divide error: 0000 [#8]
CPU: 0
EIP: 0060:[<c0103386>] Not tainted VLI
EFLAGS: 00000206 (2.6.16-rc2-PATA)
EIP is at die+0xd6/0x1f0
c03f67fc c03f67fc 000000ff 0000000b
00000000 c010374e 00000000
00000000 00000086
Call Trace:
[<c010edd8>] fixup_exception+0x18/0x60
[<c01036c0>] do_divide_error+0x0/0xa0
do_divide_error+0x8e/0xa0
[<c010a78b>]
[<c029b270>] write_msg+0x0/0x50
__call_console_drivers+0x37/0x50
[<c01134df>]
[<c0112847>] __call_console_drivers+0x37/0x50
[<c0102a0f>] error_code+0x4f/0x60
[<c010a78b>] delay_tsc+0xb/0x20
[<c01b5309>] __delay+0x9/0x10
[<c0112724>] panic+0xd4/0xf0
[<c0114b06>] do_exit+0x4f6/0x6e0
[<c0113573>] printk+0x13/0x20
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
[<c01036c0>] do_divide_error+0x0/0xa0
[<c010374e>] do_divide_error+0x8e/0xa0
[<c010a78b>] delay_tsc+0xb/0x20
[<c029b270>] write_msg+0x0/0x50
[<c0112847>] __call_console_drivers+0x37/0x50
[<c01134df>] vprintk+0x26f/0x2f0
[<c0112847>] __call_console_drivers+0x37/0x50
[<c0102a0f>] error_code+0x4f/0x60
[<c010a78b>] delay_tsc+0xb/0x20
[<c01b5309>] __delay+0x9/0x10
[<c0112724>] panic+0xd4/0xf0
[<c0114b06>] do_exit+0x4f6/0x6e0
[<c0113573>] printk+0x13/0x20
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
do_divide_error+0x8e/0xa0
[<c010a78b>] delay_tsc+0xb/0x20
[<c029b270>]
[<c0112847>] __call_console_drivers+0x37/0x50
vprintk+0x26f/0x2f0
[<c0112847>] __call_console_drivers+0x37/0x50
error_code+0x4f/0x60
[<c010a78b>]
[<c01b5309>] __delay+0x9/0x10
[<c0112724>]
[<c0114b06>] do_exit+0x4f6/0x6e0
[<c0113573>]
[<c010349b>]
[<c010edd8>] fixup_exception+0x18/0x60
[<c01036c0>] do_divide_error+0x0/0xa0
do_divide_error+0x8e/0xa0
delay_tsc+0x9/0x20
[<c029b270>]
[<c0112847>] __call_console_drivers+0x37/0x50
vprintk+0x26f/0x2f0
[<c0112847>] __call_console_drivers+0x37/0x50
[<c0102a0f>]
delay_tsc+0x9/0x20
[<c01b5309>]
[<c0112724>]
[<c0114b06>] do_exit+0x4f6/0x6e0
[<c0113573>] printk+0x13/0x20
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
[<c01036c0>] do_divide_error+0x0/0xa0
[<c010374e>] do_divide_error+0x8e/0xa0
[<c010a78b>] delay_tsc+0xb/0x20
[<c029b270>] write_msg+0x0/0x50
[<c0112847>] __call_console_drivers+0x37/0x50
[<c01134df>] vprintk+0x26f/0x2f0
[<c0112847>] __call_console_drivers+0x37/0x50
[<c0102a0f>] error_code+0x4f/0x60
[<c010a78b>] delay_tsc+0xb/0x20
[<c01b5309>] __delay+0x9/0x10
[<c0112724>] panic+0xd4/0xf0
[<c0114b06>] do_exit+0x4f6/0x6e0
[<c0113573>] printk+0x13/0x20
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
[<c01036c0>] do_divide_error+0x0/0xa0
[<c010374e>] do_divide_error+0x8e/0xa0
[<c011270a>] panic+0xba/0xf0
[<c0112847>] __call_console_drivers+0x37/0x50
[<c01134df>] vprintk+0x26f/0x2f0
[<c0112847>] __call_console_drivers+0x37/0x50
[<c0102a0f>] error_code+0x4f/0x60
[<c011270a>] panic+0xba/0xf0
[<c0114b06>] do_exit+0x4f6/0x6e0
[<c0113573>] printk+0x13/0x20
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
[<c01037ba>] do_int3+0x5a/0x70
[<c031f0fe>] int3+0x1e/0x30
[<c01016e5>] mwait_idle+0x25/0x30
[<c010167c>] cpu_idle+0x1c/0x60
[<c03f73f2>] start_kernel+0x1f2/0x240
Code: 00 c7 44 24 2c 0b 00 00 00 e8 d7 a0 01 00 89 d8 e8 80 fc ff ff 83 c4 10 31 c0 e8 f6 ad 00 00 c7 05 48 34 37 c0 ff ff ff ff 56 9d <b8> 00 f0 ff ff 21 e0 f7 40 14 00 ff ff 0f 0f 85 ed 00 00 00 8b
<0>divide error: 0000 [#9]
CPU: 0
EIP: 0060:[<c0103386>] Not tainted VLI
EFLAGS: 00000206 (2.6.16-rc2-PATA)
EIP is at die+0xd6/0x1f0
eax: c0343179 ebx: c03f66e4 ecx: f7eceec0 edx: ffff864c
esi: 00000206 edi: 00000000 ebp: c033478f esp: c03f6600
ds: 007b es: 007b ss: 0068
Process swapper (pid: 0, threadinfo=c03f6000 task=c0372200)
Stack: <0>c03f66e4 c03f66e4 c010edd8 c03f66e4 c033478f 00000000 000000ff 0000000b
c03f66e4 00000000 c01036c0 c033478f c010374e 00000001 c03f66e4 00000000
00000008 c0103386 c029b270
Call Trace:
[<c010edd8>] fixup_exception+0x18/0x60
do_divide_error+0x0/0xa0
[<c010374e>]
[<c0103386>] die+0xd6/0x1f0
write_msg+0x0/0x50
[<c0112847>] __call_console_drivers+0x37/0x50
vprintk+0x26f/0x2f0
[<c0102eaa>] show_trace_log_lvl+0x2a/0x80
error_code+0x4f/0x60
die+0xd6/0x1f0
[<c010edd8>]
[<c01036c0>] do_divide_error+0x0/0xa0
do_divide_error+0x8e/0xa0
[<c010a78b>]
[<c029b270>]
[<c0112847>] vprintk+0x26f/0x2f0
__call_console_drivers+0x37/0x50
[<c0102a0f>] error_code+0x4f/0x60
delay_tsc+0xb/0x20
__delay+0x9/0x10
panic+0xd4/0xf0
[<c0114b06>]
[<c0113573>]
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
do_divide_error+0x0/0xa0
do_divide_error+0x8e/0xa0
delay_tsc+0xb/0x20
write_msg+0x0/0x50
[<c0112847>] __call_console_drivers+0x37/0x50
vprintk+0x26f/0x2f0
[<c0112847>]
error_code+0x4f/0x60
[<c010a78b>]
[<c01b5309>] __delay+0x9/0x10
[<c0112724>] panic+0xd4/0xf0
[<c0114b06>] do_exit+0x4f6/0x6e0
[<c0113573>] printk+0x13/0x20
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
[<c01036c0>] do_divide_error+0x0/0xa0
[<c010374e>] do_divide_error+0x8e/0xa0
[<c010a78b>] delay_tsc+0xb/0x20
[<c029b270>] write_msg+0x0/0x50
[<c0112847>] __call_console_drivers+0x37/0x50
[<c01134df>] vprintk+0x26f/0x2f0
[<c0112847>] __call_console_drivers+0x37/0x50
[<c0102a0f>] error_code+0x4f/0x60
[<c010a78b>] delay_tsc+0xb/0x20
[<c01b5309>] __delay+0x9/0x10
[<c0112724>] panic+0xd4/0xf0
[<c0114b06>] do_exit+0x4f6/0x6e0
[<c0113573>] printk+0x13/0x20
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
[<c01036c0>] do_divide_error+0x0/0xa0 [<c010374e>]
[<c010a789>]
[<c029b270>] __call_console_drivers+0x37/0x50
[<c01134df>] vprintk+0x26f/0x2f0
__call_console_drivers+0x37/0x50
error_code+0x4f/0x60
[<c010a789>]
[<c01b5309>]
[<c0112724>]
[<c0114b06>] do_exit+0x4f6/0x6e0
printk+0x13/0x20
die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
do_divide_error+0x0/0xa0
do_divide_error+0x8e/0xa0
[<c010a78b>]
[<c029b270>] write_msg+0x0/0x50
__call_console_drivers+0x37/0x50
[<c01134df>]
[<c0112847>] __call_console_drivers+0x37/0x50
error_code+0x4f/0x60
[<c01b5309>]
[<c0112724>] panic+0xd4/0xf0
[<c0114b06>]
[<c0113573>]
[<c010349b>]
[<c010edd8>] fixup_exception+0x18/0x60
do_divide_error+0x0/0xa0
do_divide_error+0x8e/0xa0
panic+0xba/0xf0
[<c0112847>]
[<c01134df>]
[<c0112847>] __call_console_drivers+0x37/0x50
error_code+0x4f/0x60
[<c011270a>] panic+0xba/0xf0
[<c0114b06>] do_exit+0x4f6/0x6e0
[<c0113573>] printk+0x13/0x20
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
[<c01037ba>] do_int3+0x5a/0x70
[<c031f0fe>] int3+0x1e/0x30
[<c01016e5>] mwait_idle+0x25/0x30
[<c010167c>] cpu_idle+0x1c/0x60
[<c03f73f2>] start_kernel+0x1f2/0x240
Code: 00 c7 44 24 2c 0b 00 00 00 e8 d7 a0 01 00 89 d8 e8 80 fc ff ff 83 c4 10 31 c0 e8 f6 ad 00 00 c7 05 48 34 37 c0 ff ff ff ff 56 9d <b8> 00 f0 ff ff 21 e0 f7 40 14 00 ff ff 0f 0f 85 ed 00 00 00 8b
<0>divide error: 0000 [#10]
CPU: 0
EIP: 0060:[<c0103386>] Not tainted VLI
EFLAGS: 00000206 (2.6.16-rc2-PATA)
EIP is at die+0xd6/0x1f0
eax: c0343179 ebx: c03f65cc ecx: f7eceec0 edx: ffff7349
esi: 00000206 edi: 00000000 ebp: c033478f esp: c03f64e8
ds: 007b es: 007b ss: 0068
Process swapper (pid: 0, threadinfo=c03f6000 task=c0372200)
Stack: <0>c03f65cc c03f65cc c010edd8 c03f65cc c033478f 00000000 000000ff 0000000b
c03f65cc 00000000 c01036c0 c033478f c010374e 00000001 c03f65cc 00000000
c03f652c 00000008 00000000 00030001 c0103386 00000086 c03aea80 c029b270
Call Trace:
[<c010edd8>] fixup_exception+0x18/0x60
[<c01036c0>] do_divide_error+0x0/0xa0
[<c010374e>] do_divide_error+0x8e/0xa0
[<c0103386>] die+0xd6/0x1f0
[<c029b270>] write_msg+0x0/0x50
[<c0112847>] __call_console_drivers+0x37/0x50
[<c01134df>] vprintk+0x26f/0x2f0
[<c0102eaa>] show_trace_log_lvl+0x2a/0x80
[<c0102a0f>] error_code+0x4f/0x60
[<c0103386>] die+0xd6/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
[<c01036c0>] do_divide_error+0x0/0xa0
do_divide_error+0x8e/0xa0
[<c0103386>] die+0xd6/0x1f0
[<c029b270>]
[<c0112847>] __call_console_drivers+0x37/0x50
vprintk+0x26f/0x2f0
[<c0102eaa>] show_trace_log_lvl+0x2a/0x80
error_code+0x4f/0x60
[<c0103386>]
[<c010edd8>] fixup_exception+0x18/0x60
do_divide_error+0x0/0xa0
do_divide_error+0x8e/0xa0
[<c010a78b>]
[<c029b270>]
__call_console_drivers+0x37/0x50
[<c01134df>]
[<c0112847>] __call_console_drivers+0x37/0x50
error_code+0x4f/0x60
[<c010a78b>]
[<c01b5309>]
panic+0xd4/0xf0
do_exit+0x4f6/0x6e0
die+0x1eb/0x1f0
fixup_exception+0x18/0x60
do_divide_error+0x0/0xa0
do_divide_error+0x8e/0xa0
delay_tsc+0xb/0x20
[<c029b270>]
[<c0112847>] __call_console_drivers+0x37/0x50
vprintk+0x26f/0x2f0
[<c0112847>] __call_console_drivers+0x37/0x50
error_code+0x4f/0x60
delay_tsc+0xb/0x20
__delay+0x9/0x10
[<c0112724>]
[<c0114b06>] do_exit+0x4f6/0x6e0
[<c0113573>]
[<c010349b>]
[<c010edd8>] fixup_exception+0x18/0x60
[<c010374e>] do_divide_error+0x8e/0xa0
[<c010a78b>] delay_tsc+0xb/0x20
[<c029b270>] write_msg+0x0/0x50
[<c0112847>] __call_console_drivers+0x37/0x50
[<c01134df>] vprintk+0x26f/0x2f0
[<c0112847>] __call_console_drivers+0x37/0x50
[<c0102a0f>] error_code+0x4f/0x60
[<c010a78b>] delay_tsc+0xb/0x20
[<c01b5309>] __delay+0x9/0x10
[<c0112724>] panic+0xd4/0xf0
[<c0114b06>] do_exit+0x4f6/0x6e0
[<c0113573>] printk+0x13/0x20
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>] fixup_exception+0x18/0x60
[<c01036c0>] do_divide_error+0x0/0xa0
[<c010374e>] do_divide_error+0x8e/0xa0
[<c010a789>] delay_tsc+0x9/0x20
[<c029b270>] write_msg+0x0/0x50
[<c0112847>] __call_console_drivers+0x37/0x50
[<c01134df>] vprintk+0x26f/0x2f0
[<c0112847>] __call_console_drivers+0x37/0x50
[<c0102a0f>] error_code+0x4f/0x60
delay_tsc+0x9/0x20
__delay+0x9/0x10
[<c0112724>]
[<c0114b06>]
[<c010349b>] die+0x1eb/0x1f0
[<c010edd8>]
[<c01036c0>] do_divide_error+0x0/0xa0
do_divide_error+0x8e/0xa0
delay_tsc+0xb/0x20
[<c029b270>]
[<c0112847>] __call_console_drivers+0x37/0x50
vprintk+0x26f/0x2f0
[<c0112847>] __call_console_drivers+0x37/0x50
error_code+0x4f/0x60
delay_tsc+0xb/0x20
[<c01b5309>]
[<c0112724>] panic+0xd4/0xf0
[<c0114b06>]
[<c0113573>]
[<c010349b>] die+0x1eb/0x1f0
fixup_exception+0x18/0x60
[<c01036c0>]
[<c010374e>] do_divide_error+0x8e/0xa0
panic+0xba/0xf0
__call_console_drivers+0x37/0x50
[<c01134df>]
[<c0112847>] __call_console_drivers+0x37/0x50
error_code+0x4f/0x60
[<c011270a>]
[<c0114b06>]
[<c0113573>] printk+0x13/0x20
die+0x1eb/0x1f0
fixup_exception+0x18/0x60
[<c01037ba>]
[<c031f0fe>]
[<c01016e5>] mwait_idle+0x25/0x30
cpu_idle+0x1c/0x60
[<c03f73f2>] start_kernel+0x1f2/0x240
c7 2c 00 d7 89 80 ff 10 31 e8 00 48 ff 0f 0f 85 ed 00 00 00 8b
<0>divide error: 0000 [#11]
CPU: 0
EIP: 0060:[<c0103386>] Not tainted VLI
EFLAGS: 00000206 (2.6.16-rc2-PATA)
EIP is at die+0xd6/0x1f0
eax: c0343179 ebx: c03f64b4 ecx: f7eceec0 edx: ffff5eb6
esi: 00000206 edi: 00000000 ebp: c033478f esp: c03f63d0
ds: 007b es: 007b ss: 0068
--
Meelis Roos ([email protected])
On Maw, 2006-02-07 at 19:50 +0200, Meelis Roos wrote:
> ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xFFA8 irq 15
> ata2: dev 0 ATAPI, max UDMA/33
> ata2: dev 0 configured for UDMA/33
So far so good.
> scsi1 : ata_piix
> ata2: command 0xa0 timeout, stat 0xd0 host_stat 0x24
> ata2: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
Tries to do a packet command, which is reasonable as its ATAPI but the
timeout is unexpected.
> int3: 0000 [#1]
> CPU: 0
> EIP: 0060:[<c0148711>] Not tainted VLI
The rest seems to be a generic problem with libata and early commands
timing out (I think the device is getting deleted before the command
completes).
A new kind of crash on ALi chipset laptop (Toshiba Satellite 1800),
lspci below. I could not use netconsole on this laptop since yenta is
initialized after netconsole and so my cardbus NIC is not usable for
netconsole. I captured the details using a digital camera, in 2
different vga resolutions (to see different parts of it):
http://www.cs.ut.ee/~mroos/alicrash1.png
http://www.cs.ut.ee/~mroos/alicrash2.png
lspci details of the laptop:
0000:00:00.0 Host bridge: ALi Corporation M1644/M1644T Northbridge+Trident (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 0
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [b0] AGP version 2.0
Status: RQ=28 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [a4] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: b9 10 44 16 07 00 10 a2 01 00 00 06 00 00 00 00
10: 08 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
40: 1d 1f 0d 00 3d 10 04 14 00 20 2c 45 00 20 20 00
50: 00 00 00 00 3b 10 04 2f 00 30 00 00 00 20 20 ff
60: 82 cc 00 00 00 00 00 00 6f 8c 00 91 40 04 19 05
70: 8b 8b 94 14 00 00 00 00 00 a2 b7 57 00 08 03 02
80: 00 00 53 b7 31 88 8f f0 20 02 00 00 00 00 78 00
90: 15 00 f5 49 00 00 00 00 08 00 00 00 f8 ae 00 00
a0: 34 ee 01 00 01 00 01 00 00 00 00 00 00 00 00 00
b0: 02 a4 20 00 07 02 00 1b 00 00 00 00 08 00 37 01
c0: 10 00 13 10 00 00 00 f0 c0 68 00 c0 00 00 00 00
d0: 67 c0 60 cf 00 b0 65 1e 00 00 00 80 81 81 89 00
e0: 00 60 20 00 00 00 b8 40 00 00 08 00 00 00 28 31
f0: 00 80 00 3c 80 07 80 07 00 00 00 00 00 00 00 00
0000:00:01.0 PCI bridge: ALi Corporation PCI to AGP Controller (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f7f00000-fdffffff
Prefetchable memory behind bridge: 28000000-280fffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
00: b9 10 47 52 07 00 00 04 00 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 20 a2
20: f0 f7 f0 fd 00 28 00 28 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems: Unknown device 0004
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7eff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: b9 10 37 52 07 00 90 02 03 10 03 0c 08 40 00 00
10: 00 f0 ef f7 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 79 11 04 00
30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 00 50
40: 00 00 15 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 01 00 02 c0 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:04.0 IDE interface: ALi Corporation M5229 IDE (rev c3) (prog-if f0)
Subsystem: Toshiba America Info Systems: Unknown device 0004
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 255
Region 4: I/O ports at eff0 [size=16]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: b9 10 29 52 05 00 90 02 c3 f0 01 01 00 40 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: f1 ef 00 00 00 00 00 00 00 00 00 00 79 11 04 00
30: 00 00 00 00 60 00 00 00 00 00 00 00 ff 01 02 04
40: 06 00 00 7f 00 00 00 00 00 02 23 c9 00 80 ba 1a
50: 03 00 00 89 01 01 0a 0a 02 31 31 00 02 31 31 00
60: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 21 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 01)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR+ <PERR+
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 1000 [size=256]
Region 1: Memory at 28100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: b9 10 51 54 07 00 90 c2 01 00 01 04 00 40 00 00
10: 01 10 00 00 00 00 10 28 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 79 11 01 00
30: 00 00 00 00 dc 00 00 00 00 00 00 00 ff 01 02 18
40: 00 00 00 00 aa 00 08 e2 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 22 e6
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
Subsystem: Toshiba America Info Systems: Unknown device 0004
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [a0] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: b9 10 33 15 0f 00 10 02 00 00 01 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 79 11 04 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: 07 12 0b c0 1d 00 00 07 99 00 00 90 00 00 ed 03
50: 00 00 00 00 70 00 02 00 7c 00 00 00 00 00 00 04
60: 60 21 00 80 00 00 00 00 00 00 00 00 00 64 00 00
70: 91 00 2f 00 09 1f 81 50 aa 42 01 20 31 00 00 11
80: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 e1 02 00 80 00 80 72 c3 06 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:08.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: b9 10 01 71 00 00 00 02 00 00 80 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 79 11 01 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 44 08 00 00 80 23 01 28 00 0c 30 00 00 00 13
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 80 00 00 00 00 00 08 f3 77 10 32 bf 06 10 00
80: 37 82 1a 13 00 00 00 00 06 02 00 00 00 00 00 44
90: 00 aa 00 00 00 00 00 4d f8 ff 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 08 0c 00 b2 00 b0 00 00 00
b0: 00 8c 00 1c 00 c9 62 00 70 04 00 00 00 00 00 80
c0: 1a 10 7f 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 46 00 00 00 00 02 00 00 00 00 00 0c 00 00 00
e0: 00 ee 00 ef 01 00 01 00 00 00 00 00 00 00 00 00
f0: 01 00 20 7e 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:11.0 CardBus bridge: Toshiba America Info Systems ToPIC100 PCI to Cardbus Bridge with ZV Support (rev 32)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 28101000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=0
Memory window 0: 20000000-21fff000 (prefetchable)
Memory window 1: 22000000-23fff000
I/O window 0: 00001400-000014ff
I/O window 1: 00001800-000018ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00: 79 11 17 06 07 00 90 04 32 00 07 06 00 a8 82 00
10: 00 10 10 28 80 00 80 04 00 02 05 00 00 00 00 20
20: 00 f0 ff 21 00 00 00 22 00 f0 ff 23 00 14 00 00
30: fc 14 00 00 00 18 00 00 fc 18 00 00 ff 01 80 05
40: 79 11 01 00 01 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 01 00 00 00 80 00 00 00 00 00 00 00 00 01
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: d0 10 00 86 00 00 00 0c 00 80 00 00 00 d1 00 00
b0: cf 3f 3f 3f 20 10 08 0a 00 01 01 10 00 3f 02 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 00
0000:00:11.1 CardBus bridge: Toshiba America Info Systems ToPIC100 PCI to Cardbus Bridge with ZV Support (rev 32)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin B routed to IRQ 11
Region 0: Memory at 28102000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=0
Memory window 0: 24000000-25fff000 (prefetchable)
Memory window 1: 26000000-27fff000
I/O window 0: 00001c00-00001cff
I/O window 1: 00002000-000020ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
00: 79 11 17 06 07 00 90 04 32 00 07 06 00 a8 82 00
10: 00 20 10 28 80 00 80 04 00 06 09 00 00 00 00 24
20: 00 f0 ff 25 00 00 00 26 00 f0 ff 27 00 1c 00 00
30: fc 1c 00 00 00 20 00 00 fc 20 00 00 ff 02 00 05
40: 79 11 01 00 01 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 01 00 00 00 80 00 00 00 00 00 00 00 00 01
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: d0 20 00 86 00 00 00 0c 00 00 00 00 00 d1 00 00
b0: cf 3f 3f 3f 20 10 08 0a 00 01 01 10 00 3f 02 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 00
0000:01:00.0 VGA compatible controller: Trident Microsystems CyberBlade XPAi1 (rev 82) (prog-if 00 [VGA])
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 8
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=32M]
Region 1: Memory at fbc00000 (32-bit, non-prefetchable) [size=4M]
Region 2: Memory at f8000000 (32-bit, non-prefetchable) [size=32M]
Region 3: Memory at f7ff8000 (32-bit, non-prefetchable) [size=32K]
Expansion ROM at 28000000 [disabled] [size=64K]
Capabilities: [80] AGP version 2.0
Status: RQ=33 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [90] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 23 10 20 88 07 00 30 02 82 00 00 03 00 08 00 00
10: 00 00 00 fc 00 00 c0 fb 00 00 00 f8 00 80 ff f7
20: 00 00 00 00 00 00 00 00 00 00 00 00 79 11 01 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 02 90 20 00 07 02 00 20 00 00 00 00 00 00 00 00
90: 01 00 22 06 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Billionton Systems Inc LNR-100 Family 10/100 Base-TX Ethernet
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 1c00 [size=256]
Region 1: Memory at 26000000 (32-bit, non-prefetchable) [size=512]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: ec 10 39 81 07 00 90 02 10 00 00 02 00 40 00 00
10: 01 1c 00 00 00 00 00 26 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 02 01 00 00 cb 14 00 02
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 20 40
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 02 76 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
--
Meelis Roos ([email protected])
On Mer, 2006-02-08 at 20:28 +0200, Meelis Roos wrote:
> A new kind of crash on ALi chipset laptop (Toshiba Satellite 1800),
> lspci below. I could not use netconsole on this laptop since yenta is
> initialized after netconsole and so my cardbus NIC is not usable for
> netconsole. I captured the details using a digital camera, in 2
> different vga resolutions (to see different parts of it):
>
> http://www.cs.ut.ee/~mroos/alicrash1.png
> http://www.cs.ut.ee/~mroos/alicrash2.png
Thanks: Utterly dumb bug made while converting to the newer refcounting
PCI API
--- drivers/scsi/pata_ali.c~ 2006-02-09 15:17:06.430326208 +0000
+++ drivers/scsi/pata_ali.c 2006-02-09 15:17:06.431326056 +0000
@@ -528,7 +528,7 @@
pci_write_config_byte(pdev, 0x4B, tmp | 0x08);
}
- north = pci_get_slot(0, PCI_DEVFN(0,0));
+ north = pci_get_slot(pdev->bus, PCI_DEVFN(0,0));
isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
if(north && north->vendor == PCI_VENDOR_ID_AL) {
> Thanks: Utterly dumb bug made while converting to the newer refcounting
> PCI API
Yes, it boots now. But reading the disk fails - partition table reading
bails out. Maybe this is the same early command problem that affects
other controllers too.
http://www.cs.ut.ee/~mroos/ali1.png
http://www.cs.ut.ee/~mroos/ali2.png
And trying to read the disk from initrd with dd:
http://www.cs.ut.ee/~mroos/ali3.png
--
Meelis Roos ([email protected])
On Thu, Feb 09, 2006 at 11:12:27PM +0200, Meelis Roos wrote:
> >Thanks: Utterly dumb bug made while converting to the newer refcounting
> >PCI API
>
> Yes, it boots now. But reading the disk fails - partition table reading
> bails out. Maybe this is the same early command problem that affects
> other controllers too.
Alan, can this related to LBA48 compatibility? I remember having
problems with this when Andre Hedrick added LBA48 support around
linux-2.4.19. The drive (Maxtor 4D040H2) advertised it supported LBA48,
but the chipset (Ali 1543 rev C3, IIRC) didn't.
Unfortunately I can't test it, my Ali main board died a couple of
months ago so I'm just guessing :-(.
Erik
--
+-- Erik Mouw -- http://www.harddisk-recovery.com -- +31 70 370 12 90 --
| Lab address: Delftechpark 26, 2628 XH, Delft, The Netherlands
On Gwe, 2006-02-10 at 13:01 +0100, Erik Mouw wrote:
> Alan, can this related to LBA48 compatibility? I remember having
> problems with this when Andre Hedrick added LBA48 support around
> linux-2.4.19. The drive (Maxtor 4D040H2) advertised it supported LBA48,
> but the chipset (Ali 1543 rev C3, IIRC) didn't.
I don't think so. There is code to handle it. More likely the tuning
code is wrong and loaded incorrect values. We identify at PIO0 then
select modes.
Best way to test:
Boot with mwdma/udma set to zero in "info" block
then
Boot with only pio 0 claimed as supported and the mode setting logic
commented out.
That gives a good idea what broke.
On Feb 06, 2006, at 11:46, Alan Cox wrote:
> With the exception of HPA and serialize support its now pretty
> close to a straight replacement for drivers/ide on x86 systems (and
> boxes using PCI devices only). There is other stuff that wants
> improving still like error recovery on CRC, but its getting close.
>
> Please remember that functionality equivalence, and much cleaner
> code doesn't mean less bugs yet, there is a *lot* of testing and
> hammering on the code needed before it is production ready for
> switching.
From looking at your status file, I can't tell if you've implemented
the PowerMac IDE support yet (Based on your email's mention of x86-
only, I'm guessing not). If/when you do get that support done, I'd
be more than happy to test it for you on my PPC boxen. Overall this
work looks very nice, thanks!
Cheers,
Kyle Moffett
--
There are two ways of constructing a software design. One way is to
make it so simple that there are obviously no deficiencies. And the
other way is to make it so complicated that there are no obvious
deficiencies. The first method is far more difficult.
-- C.A.R. Hoare
