2.5.31 hangs during boot after:
hde 60036480 sectors w/1916 KiB cache CHS=59560/16/63, UDMA(44)
hde hde1 hde2 hde3 hde4 <
hde is a IBM-DTLA-307030 on a HPT366 (Abit BP6) 2.5.29 boot OK
Sorry if it is a known problem!
On Sun, 11 Aug 2002, Leopold Gouverneur wrote:
> 2.5.31 hangs during boot after:
>
> hde 60036480 sectors w/1916 KiB cache CHS=59560/16/63, UDMA(44)
> hde hde1 hde2 hde3 hde4 <
>
> hde is a IBM-DTLA-307030 on a HPT366 (Abit BP6) 2.5.29 boot OK
> Sorry if it is a known problem!
Hrrmm... That definitely sounds like partition-parser getting
screwed in the middle of IO - it _does_ read the first sector
and apparently hangs in attempt to read another one. Very
interesting, since AFAICS all changes that could have affected
that place happened between .28 and .29.
Deadlocks in surrounding code are very unlikely, since it simply
doesn't care about block number and would just as happily hang
while reading the first sector. Which it hadn't.
Could you give the output of fdisk -lu /dev/hde? (after booting a working
kernel, obviously ;-)
Leopold Gouverneur <[email protected]> writes:
> 2.5.31 hangs during boot after:
>
> hde 60036480 sectors w/1916 KiB cache CHS=59560/16/63, UDMA(44)
> hde hde1 hde2 hde3 hde4 <
>
> hde is a IBM-DTLA-307030 on a HPT366 (Abit BP6) 2.5.29 boot OK
> Sorry if it is a known problem!
Sound like same problem and me.
--
OGAWA Hirofumi <[email protected]>
Leopold Gouverneur <[email protected]> writes:
> 2.5.31 hangs during boot after:
>
> hde 60036480 sectors w/1916 KiB cache CHS=59560/16/63, UDMA(44)
> hde hde1 hde2 hde3 hde4 <
>
> hde is a IBM-DTLA-307030 on a HPT366 (Abit BP6) 2.5.29 boot OK
> Sorry if it is a known problem!
Sound like the same problem as me. If so, the following patch should
be solves this problem.
Can you try patch?
--
OGAWA Hirofumi <[email protected]>
--- tools/linux-2.5.31/drivers/ide/pcidma.c 2002-08-05 03:01:09.000000000 +0900
+++ ide_pcidma-2.5.31/drivers/ide/pcidma.c 2002-08-11 18:46:42.000000000 +0900
@@ -391,22 +391,20 @@
sg = ch->sg_table;
while (i--) {
u32 cur_addr = sg_dma_address(sg);
- u32 cur_len = sg_dma_len(sg) & 0xffff;
+ u32 cur_len = sg_dma_len(sg);
/* Delete this test after linux ~2.5.35, as we care
about performance in this loop. */
BUG_ON(cur_len > ch->max_segment_size);
*table++ = cpu_to_le32(cur_addr);
- *table++ = cpu_to_le32(cur_len);
+ *table++ = cpu_to_le32(cur_len & 0xffff);
sg++;
}
-#ifdef CONFIG_BLK_DEV_TRM290
- if (ch->chipset == ide_trm290)
+ if (ch->chipset != ide_trm290)
*--table |= cpu_to_le32(0x80000000);
-#endif
return ch->sg_nents;
}