Hi !
First thanks a lot for the good ideas and comments on my previous posting. I
updated the kernel to 2.4.19-pre4 and it seem's to improve the situation.
There was no crash with the RTL Network Card but the system response boged
down sometimes for a few (up to 10) seconds. Then I tried the same togeter
with the "3com 3c905C" networkcard and the system hung a few seconds after
starting the copy-commands "dd count=16M if=/dev/zero of=/home/test0&" and
"cp /home/zero /dev/null&" and "ico" on an remote terminal for network load.
Thus my personal work arround would be to use the rtl network card - but
there remains this problem.
Kai
00:00.0 Host bridge: VIA Technologies, Inc. VT8367 [KT266]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8367 [KT266 AGP]
00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
00:0b.0 RAID bus controller: HighPoint Technologies, Inc.: Unknown device 0008 (rev 07)
00:0b.1 RAID bus controller: HighPoint Technologies, Inc.: Unknown device 0008 (rev 07)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 86C326 (rev 0b)
Nope I can crash it randomly :-/
On Tue, 26 Mar 2002, Kai-Boris Schad wrote:
> Hi !
>
> First thanks a lot for the good ideas and comments on my previous posting. I
> updated the kernel to 2.4.19-pre4 and it seem's to improve the situation.
> There was no crash with the RTL Network Card but the system response boged
> down sometimes for a few (up to 10) seconds. Then I tried the same togeter
> with the "3com 3c905C" networkcard and the system hung a few seconds after
> starting the copy-commands "dd count=16M if=/dev/zero of=/home/test0&" and
> "cp /home/zero /dev/null&" and "ico" on an remote terminal for network load.
> Thus my personal work arround would be to use the rtl network card - but
> there remains this problem.
>
> Kai
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
Andre Hedrick
LAD Storage Consulting Group