First of all, thanks for helping me...
I have noticed that after I have installed the new version
of kernel (2.4.2),I am having some problems... After compiling
everything, and making the make install_modules, I have the message that
there is nothing to be done in the directories... But, ok, it creates
the modules directorie. But...
First of all,
1) -- now, trying to acess the network is impossible ... the
ifconfig just shows "lo" and the ethernets no... but, they were
configured in the lilo in the same way they were configured with
the old kernel. You can see the configuration in the lilo:
(there are two partitions, and I have installed the new kernel in
the partition altres)
image= ../boot/vmlinuz.ip6
label=lr
append ="ether=5,0x300,eth0 ether=10, 0x210, eth1"
initrd=..boot/initrd-2.2.12-20.img
root=/dev/hda1
read-only
image= ../boot/vmlinuz-2.4.2
label=altres
append ="ether=5,0x300,eth0 ether=10, 0x210, eth1"
#initrd=..boot/initrd-2.2.12-20.img
root=/dev/hdc1
read-only
Well, I put a comment in front of initrd because I didnt find
this file *.img of the new kernel...
I havent changed anything else, and my computer cant see the
network in the partition altres, but in the other one,it is
possible.
2)The other problem is:
After installing it, this partition (the only one which
has version 2.4) cant reboot or halt. It starts to do that,
but it always stops at the message:
INIT: there is no more process left in this runlevel.
so,I always have to reset the computer...
Do you know why it is happening? And what could I do to fix it??
Thank you,
Tania Ramos
On Mon, 5 Mar 2001, Tania Gomes Ramos wrote:
Have you updated your modutils? Maybe that's why it's not working your
network adapter. If you didn't, take a look at
/usr/src/linux/Documentation/Changes to find out with versions do you need
to run a 2.4 kernel.
>
>
> First of all, thanks for helping me...
> I have noticed that after I have installed the new version
> of kernel (2.4.2),I am having some problems... After compiling
> everything, and making the make install_modules, I have the message that
> there is nothing to be done in the directories... But, ok, it creates
> the modules directorie. But...
> First of all,
> 1) -- now, trying to acess the network is impossible ... the
> ifconfig just shows "lo" and the ethernets no... but, they were
> configured in the lilo in the same way they were configured with
> the old kernel. You can see the configuration in the lilo:
> (there are two partitions, and I have installed the new kernel in
> the partition altres)
>
> image= ../boot/vmlinuz.ip6
> label=lr
> append ="ether=5,0x300,eth0 ether=10, 0x210, eth1"
> initrd=..boot/initrd-2.2.12-20.img
> root=/dev/hda1
> read-only
>
> image= ../boot/vmlinuz-2.4.2
> label=altres
> append ="ether=5,0x300,eth0 ether=10, 0x210, eth1"
> #initrd=..boot/initrd-2.2.12-20.img
> root=/dev/hdc1
> read-only
>
> Well, I put a comment in front of initrd because I didnt find
> this file *.img of the new kernel...
>
> I havent changed anything else, and my computer cant see the
> network in the partition altres, but in the other one,it is
> possible.
>
> 2)The other problem is:
> After installing it, this partition (the only one which
> has version 2.4) cant reboot or halt. It starts to do that,
> but it always stops at the message:
> INIT: there is no more process left in this runlevel.
> so,I always have to reset the computer...
>
> Do you know why it is happening? And what could I do to fix it??
>
> Thank you,
> Tania Ramos
>
>
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
David G?mez
"The question of whether computers can think is just like the question of
whether submarines can swim." -- Edsger W. Dijkstra