The de4x5 driver crashed on me twice today (on a 2 CPU x86 box); The
network went down for no visible reason (nothing in syslog or on the console).
The network card is a
00:0b.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)
Subsystem: Compu-Shack: Unknown device 4235)
Subsystem: Unknown device 4942:4c4c
I/O ports at b800 [size=64]
Shutting down networking, removing the module and re-inserting it
produces:
eth0: DC21143 at 0xd000 (PCI bus 0, device 11), h/w address 00:00:cb:56:48:9b,
eth0: Using generic MII device control. If the board doesn't operate,
please mail the following dump to the author:
MII device address: 5
MII CR: 3000
MII SR: 7809
MII ID0: 15
MII ID1: f430
MII ANA: 1e1
MII ANC: 0
MII 16: 158
MII 17: 608
MII 18: 10
and requires IRQ10 (provided by PCI BIOS).
de4x5.c:V0.545 1999/11/28 [email protected]
eth0: media is 100Mb/s.
and
eth0: DC21143 at 0xd000 (PCI bus 0, device 11), h/w address 00:00:cb:56:48:9b,
eth0: Using generic MII device control. If the board doesn't operate,
please mail the following dump to the author:
MII device address: 5
MII CR: 3000
MII SR: 7809
MII ID0: 15
MII ID1: f430
MII ANA: 1e1
MII ANC: 0
MII 16: 158
MII 17: 408
MII 18: 10
and requires IRQ17 (provided by PCI BIOS).
de4x5.c:V0.545 1999/11/28 [email protected]
eth0: media is 100Mb/s.
LLaP
bero