My system has a IDE ATAPI CD-RW (Matshita CW 7586) and has a serious
problem reading the last audio track of an audio CD. Reading the rest of
the tracks is Ok, but when trying to rip the last one I get the following
error:
[With cdda2wav, versions 1.9 and 1.10a13]
CDB: 47 00 00 3D 0D 3C 3D 0D 3D 00
Sense Bytes: F0 00 03 00 04 34 4F 0A 00 00 00 00 02 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0
Sense flags: Blk 275535 (valid)
cmd finished after 0.418s timeout 300s
recording 135.07599 seconds stereo with 16 bits @ 44100.0 Hz
->'track-19'...
cdda2wav: Input/output error. ReadCD MMC 12: scsi sendcmd: retryable error
CDB: BE 04 00 04 0E 44 00 00 4B 10 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 03 00 04 0E 8B 0A 00 00 00 00 02 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0
Sense flags: Blk 265867 (valid)
cmd finished after 0.379s timeout 300s
... and it keeps on like that.
[With cdparanoia III rel. 9.7]
Ripping from sector 265204 (track 19 [0:00.00])
to sector 275385 (track 19 [2:15.56])
outputting to cdda.wav
scsi_read error: sector=265204 length=3 retry=0
Sense key: 3 ASC: 2 ASCQ: 0
Transport error: Medium reading data from medium
System error: Input/output error
scsi_read error: sector=265207 length=13 retry=0
Sense key: 3 ASC: 2 ASCQ: 0
Transport error: Medium reading data from medium
System error: Input/output error
scsi_read error: sector=265207 length=6 retry=1
Sense key: 3 ASC: 2 ASCQ: 0
Transport error: Medium reading data from medium
System error: Input/output error
... and so on.
Both kernel versions 2.4.1 and 2.2.18 have this problem and, of course,
(I think) this is not a hardware problem since ripping only with IDE
CDROM support is perfect and clean.
My /proc/scsi/scsi says:
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: MATSHITA Model: CD-RW CW-7586 Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Thanks in advance,
Manuel Cepedello Boiso
E-mail: [email protected]
P.D. BTW, I've got full of
'kernel: VFS: Disk change detected on device sr(11,0)'
on my syslog. Is it normal?