Hello,
I probably found a buf somewhere in the (v)fs layer. I do mount smb
filesystems over the network. Mounting works fine, say I do a
mount -t smbfs -o username="..." //1.2.3.4/test /mnt/windows
ls /mnt/windows
(that gives, e.g. some files and directories...)
ls /mnt/windows/somedirectory
dies with a segfault and I find the following stuff on the syslog:
--START OF LOG
Unable to handle kernel paging request at virtual address d0000000
printing eip:
d11d5c13
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<d11d5c13>] Not tainted
EFLAGS: 00210282
eax: 58ea5128 ebx: 2a037f58 ecx: fa6373fd edx: 782edd08
esi: d0000000 edi: ca1f5e30 ebp: ca1f5ec8 esp: ca1f5de0
ds: 0018 es: 0018 ss: 0018
Process kdeinit (pid: 1603, stackpage=ca1f5000)
Stack: c0146a10 ca1f5e98 d11e4502 00000001 00000000 00000000 00000000 ce7f5180
c35fe6c0 00000000 00028955 c4fe2f40 00000000 00000000 c9f16000 0000002f
00000000 00000000 00000001 00000031 d11d43c5 c906cf40 ca1f5fb0 c0146a10
Call Trace: [filldir64+176/368] [<d11d43c5>] [filldir64+176/368]
[filldir64+176/368] [<d11d445c>]
[filldir64+176/368] [<d11d5343>] [filldir64+176/368]
[dcache_readdir+94/288] [filldir64+176/368] [sys_getdents64+255/259]
[filldir64+176/368] [send_sigio_to_task+160/208] [system_call+51/56]
Code: 0f b6 06 46 89 c2 c1 e2 04 01 da c1 e8 04 01 c2 8d 04 92 8d
Unable to handle kernel paging request at virtual address d0000000
printing eip:
d11d9c13
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<d11d9c13>] Not tainted
EFLAGS: 00010282
eax: 1e6d7025 ebx: a95729eb ecx: f54c83fd edx: 6c7c49a1
esi: d0000000 edi: c6207e30 ebp: c6207ec8 esp: c6207de0
ds: 0018 es: 0018 ss: 0018
Process ls (pid: 1681, stackpage=c6207000)
Stack: c0146a10 c6207e98 d11e8502 00000001 00000000 00000000 00000000 ca6a4040
c4b3d540 00000003 0018ef3e 00000003 00000000 00000000 c2068000 0000002f
00000000 00000000 00000001 00000031 d11d83c5 c63364c0 c6207fb0 c0146a10
Call Trace: [filldir64+176/368] [<d11d83c5>] [filldir64+176/368]
[filldir64+176/368] [<d11d845c>]
[filldir64+176/368] [<d11d9343>] [filldir64+176/368]
[dcache_readdir+94/288] [filldir64+176/368] [sys_getdents64+255/259]
[filldir64+176/368] [__vma_link+19/176] [system_call+51/56]
Code: 0f b6 06 46 89 c2 c1 e2 04 01 da c1 e8 04 01 c2 8d 04 92 8d
Unable to handle kernel paging request at virtual address d0000000
printing eip:
d11d5c13
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<d11d5c13>] Not tainted
EFLAGS: 00010282
eax: 2327c529 ebx: e6f11827 ecx: fd52d3fd edx: a0a18dd5
esi: d0000000 edi: cd4d5e30 ebp: cd4d5ec8 esp: cd4d5de0
ds: 0018 es: 0018 ss: 0018
Process ls (pid: 793, stackpage=cd4d5000)
Stack: c0146a10 cd4d5e98 d11e4502 00000001 00000000 00000000 00000000 cd12f2c0
cd291dc0 00000000 000022c8 00000000 00000000 00000000 cd163000 0000002f
00000000 00000000 00000001 00000031 d11d43c5 cd3859c0 cd4d5fb0 c0146a10
Call Trace: [filldir64+176/368] [<d11d43c5>] [filldir64+176/368]
[filldir64+176/368] [<d11d445c>]
[filldir64+176/368] [<d11d5343>] [filldir64+176/368]
[dcache_readdir+94/288] [filldir64+176/368] [sys_getdents64+255/259]
[filldir64+176/368] [__vma_link+19/176] [system_call+51/56]
Code: 0f b6 06 46 89 c2 c1 e2 04 01 da c1 e8 04 01 c2 8d 04 92 8d
-- END OF LOG
As you see, the bug is reproducible (at least three times). Of course I
rebooted my computer always after these things happened.
My kernel version (/proc/version):
Linux version 2.4.18 (root@lap) (gcc version 2.95.3 20010315 (SuSE)) #8 SMP
Sun Mar 3 16:35:43 CET 2002
ver_linux says:
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux maciej 2.4.18 #8 SMP Sun Mar 3 16:35:43 CET 2002 i686 unknown
Gnu C 2.95.3
Gnu make 3.79.1
binutils 2.11.90.0.29
util-linux 2.11i
mount 2.11i
modutils 2.4.8
e2fsprogs 1.24a
reiserfsprogs 3.x.0k-pre9
PPP 2.4.1
isdn4k-utils 3.1pre2
Linux C Library x 1 root root 1384168 Sep 20 05:52
/lib/libc.so.6
Dynamic linker (ldd) 2.2.4
Procps 2.0.7
Net-tools 1.60
Kbd 1.04
Sh-utils 2.0
Modules Loaded nls_cp437 nls_iso8859-1 smbfs serial
Processor information (/proc/cpuinfo):
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 7
model name : AMD Duron(tm) Processor
stepping : 1
cpu MHz : 1000.048
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 1992.29
Modules (/proc/modules):
nls_cp437 4384 1 (autoclean)
nls_iso8859-1 2880 1 (autoclean)
smbfs 33104 1 (autoclean)
serial 46112 0 (autoclean)
ioports (/proc/ioports):
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
1000-10ff : VIA Technologies, Inc. AC97 Audio Controller
1400-14ff : VIA Technologies, Inc. AC97 Modem Controller
1800-18ff : Realtek Semiconductor Co., Ltd. RTL-8139
1800-18ff : 8139too
1c00-1c1f : VIA Technologies, Inc. UHCI USB
1c00-1c1f : usb-uhci
1c20-1c3f : VIA Technologies, Inc. UHCI USB (#2)
1c20-1c3f : usb-uhci
1c40-1c4f : VIA Technologies, Inc. Bus Master IDE
1c40-1c47 : ide0
1c48-1c4f : ide1
1c50-1c53 : VIA Technologies, Inc. AC97 Audio Controller
1c54-1c57 : VIA Technologies, Inc. AC97 Audio Controller
4000-40ff : PCI CardBus #02
4400-44ff : PCI CardBus #02
4800-48ff : PCI CardBus #06
4c00-4cff : PCI CardBus #06
6800-687f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
8100-810f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
9000-9fff : PCI Bus #01
9000-90ff : ATI Technologies Inc Rage Mobility P/M AGP 2x
iomem (/proc/iomem, you guessed it):
00000000-0009efff : System RAM
0009f000-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-0feeffff : System RAM
00100000-002a8bc7 : Kernel code
002a8bc8-0031957f : Kernel data
0fef0000-0fefefff : ACPI Tables
0feff000-0fefffff : ACPI Non-volatile Storage
0ff00000-0fffffff : System RAM
10000000-10000fff : Texas Instruments PCI1420
10001000-10001fff : Texas Instruments PCI1420 (#2)
10400000-107fffff : PCI CardBus #02
10800000-10bfffff : PCI CardBus #02
10c00000-10ffffff : PCI CardBus #06
11000000-113fffff : PCI CardBus #06
e8000000-e8003fff : PCI device 104c:8020 (Texas Instruments)
e8004000-e80047ff : PCI device 104c:8020 (Texas Instruments)
e8004800-e80048ff : Realtek Semiconductor Co., Ltd. RTL-8139
e8004800-e80048ff : 8139too
e8100000-e9ffffff : PCI Bus #01
e8100000-e8100fff : ATI Technologies Inc Rage Mobility P/M AGP 2x
e9000000-e9ffffff : ATI Technologies Inc Rage Mobility P/M AGP 2x
e9000000-e97effff : vesafb
f0000000-f7ffffff : VIA Technologies, Inc. VT8363/8365 [KT133/KM133]
fffe0000-ffffffff : reserved
And finally, here's my lspci -vvv output:
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03)
Subsystem: Sony Corporation: Unknown device 80f6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: e8100000-e9ffffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev
40)
Subsystem: Sony Corporation: Unknown device 80f6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if
8a [Master SecP PriP])
Subsystem: Sony Corporation: Unknown device 80f6
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at 1c40 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 1a) (prog-if 00
[UHCI])
Subsystem: Sony Corporation: Unknown device 80f6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at 1c00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 1a) (prog-if 00
[UHCI])
Subsystem: Sony Corporation: Unknown device 80f6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at 1c20 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.4 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev
40)
Subsystem: Sony Corporation: Unknown device 80f6
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio
Controller (rev 50)
Subsystem: Sony Corporation: Unknown device 80f6
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at 1000 [size=256]
Region 1: I/O ports at 1c54 [size=4]
Region 2: I/O ports at 1c50 [size=4]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.6 Communication controller: VIA Technologies, Inc. AC97 Modem Controller
(rev 30)
Subsystem: Sony Corporation: Unknown device 80f6
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at 1400 [size=256]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 CardBus bridge: Texas Instruments PCI1420
Subsystem: Sony Corporation: Unknown device 80f6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 168, cache line size 10
Interrupt: pin A routed to IRQ 9
Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 10400000-107ff000 (prefetchable)
Memory window 1: 10800000-10bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00:0a.1 CardBus bridge: Texas Instruments PCI1420
Subsystem: Sony Corporation: Unknown device 80f6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 168, cache line size 10
Interrupt: pin B routed to IRQ 10
Region 0: Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 10c00000-10fff000 (prefetchable)
Memory window 1: 11000000-113ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00:0e.0 FireWire (IEEE 1394): Texas Instruments: Unknown device 8020 (prog-if
10 [OHCI])
Subsystem: Sony Corporation: Unknown device 80f6
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 9
Region 0: Memory at e8004000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at e8000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
Subsystem: Sony Corporation: Unknown device 80f6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 128 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 1800 [size=256]
Region 1: Memory at e8004800 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP
2x (rev 64) (prog-if 00 [VGA])
Subsystem: Sony Corporation: Unknown device 80f6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 66 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 5
Region 0: Memory at e9000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at e8100000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [50] AGP version 1.0
Status: RQ=255 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [5c] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
--
Okay, that's all, folks.
Hope I helped.
Stephan
On Wed, 6 Mar 2002, Stephan Maciej wrote:
> EIP: 0010:[<d11d5c13>] Not tainted
> EFLAGS: 00210282
> eax: 58ea5128 ebx: 2a037f58 ecx: fa6373fd edx: 782edd08
> esi: d0000000 edi: ca1f5e30 ebp: ca1f5ec8 esp: ca1f5de0
> ds: 0018 es: 0018 ss: 0018
> Process kdeinit (pid: 1603, stackpage=ca1f5000)
> Stack: c0146a10 ca1f5e98 d11e4502 00000001 00000000 00000000 00000000 ce7f5180
> c35fe6c0 00000000 00028955 c4fe2f40 00000000 00000000 c9f16000 0000002f
> 00000000 00000000 00000001 00000031 d11d43c5 c906cf40 ca1f5fb0 c0146a10
> Call Trace: [filldir64+176/368] [<d11d43c5>] [filldir64+176/368]
> [filldir64+176/368] [<d11d445c>]
> [filldir64+176/368] [<d11d5343>] [filldir64+176/368]
> [dcache_readdir+94/288] [filldir64+176/368] [sys_getdents64+255/259]
> [filldir64+176/368] [send_sigio_to_task+160/208] [system_call+51/56]
Are you sure that you have right System.map? filldir64() definitely is
not recursive...
On Wed, 6 Mar 2002, Stephan Maciej wrote:
> Unable to handle kernel paging request at virtual address d0000000
> printing eip:
> d11d5c13
> *pde = 00000000
> Oops: 0000
> CPU: 0
> EIP: 0010:[<d11d5c13>] Not tainted
> EFLAGS: 00210282
> eax: 58ea5128 ebx: 2a037f58 ecx: fa6373fd edx: 782edd08
> esi: d0000000 edi: ca1f5e30 ebp: ca1f5ec8 esp: ca1f5de0
> ds: 0018 es: 0018 ss: 0018
> Process kdeinit (pid: 1603, stackpage=ca1f5000)
> Stack: c0146a10 ca1f5e98 d11e4502 00000001 00000000 00000000 00000000 ce7f5180
> c35fe6c0 00000000 00028955 c4fe2f40 00000000 00000000 c9f16000 0000002f
> 00000000 00000000 00000001 00000031 d11d43c5 c906cf40 ca1f5fb0 c0146a10
> Call Trace: [filldir64+176/368] [<d11d43c5>] [filldir64+176/368]
> [filldir64+176/368] [<d11d445c>]
> [filldir64+176/368] [<d11d5343>] [filldir64+176/368]
> [dcache_readdir+94/288] [filldir64+176/368] [sys_getdents64+255/259]
> [filldir64+176/368] [send_sigio_to_task+160/208] [system_call+51/56]
>
> Code: 0f b6 06 46 89 c2 c1 e2 04 01 da c1 e8 04 01 c2 8d 04 92 8d
You are supposed to decode these with ksymoops ...
However "d0000000" and 2.4.18 can only be the nls bug introduced by
someone late in the 2.4.18 series. Please try this patch:
http://www.hojdpunkten.ac.se/054/samba/00-smbfs-2.4.18-codepage.patch.gz
/Urban