2002-09-04 23:03:33

by Mike Dresser

[permalink] [raw]
Subject: Intel Etherexpress PCI ID

I just snagged ac5-pre2, and noticed there isn't a PCI ID yet for the
intel network chipset built into the ASUS P4B533-E w/raid motherboard(bios
version 1008) I bought today.

Bus 2, device 8, function 0:
Ethernet controller: PCI device 8086:1039 (Intel Corp.) (rev 129).

I put

{ PCI_VENDOR_ID_INTEL, 0x1039, PCI_ANY_ID, PCI_ANY_ID, },

just below the 0x1038 line in eepro100.c, and it works fine.

I assume the promise card is supported now, from browsing through the
changes. I believe it's a 20276.

I didn't have problems with the ICH4 that others have reported on this
board, DMA mode works. Does the usual complain about resource collisions
though.

Mike


2002-09-04 23:15:22

by Mike Dresser

[permalink] [raw]
Subject: Re: Intel Etherexpress PCI ID

On Wed, 4 Sep 2002, Mike Dresser wrote:

> I just snagged ac5-pre2, and noticed there isn't a PCI ID yet for the
> intel network chipset built into the ASUS P4B533-E w/raid motherboard(bios
> version 1008) I bought today.

Never mind me, for some reason I was thinking your pre5-ac2 was everything
like in the old days. Just looked in the actual pre5 file, and it's in
there already.

At least the 845e IDE controller line might be a valid datapoint.
Sorry for wasting everyone's time.

Mike



2002-09-05 00:03:29

by Alan

[permalink] [raw]
Subject: Re: Intel Etherexpress PCI ID

On Thu, 2002-09-05 at 00:07, Mike Dresser wrote:
> I didn't have problems with the ICH4 that others have reported on this
> board, DMA mode works. Does the usual complain about resource collisions
> though.

AC still complains but it knows how to fix up the result