Hi
==
As I am uncertain that this mail address for Alan Cox is real or not,
I'll send this message to
[email protected]
- as well. I hope that this gets through to the right person anyway.
Regards, Henning Petersen
--- Henning Petersen <[email protected]> skrev: > Dato: Mon, 8
Jul 2002 23:03:04 +0200 (CEST)
> Fra: Henning Petersen <[email protected]>
> Emne: unhandled interrupt: 0xff63fc7f crash with emu10k1/soundblaster
> live value card
> Til: [email protected]
>
> Hi developers
> =============
>
> I have a weird crash happening when using sound and X at the same
> time.
>
> 1.) I boot up my debian 2.4.18 kernel (see dmesg output)
> 2.) kdm starts up X
> 3.) I run : depmod -a, modprobe emu10k1 as root
> 4.) When I have used the sound card with for example xine or
> realplayer, I can't shift to one of the virtual consoles
> (ctrl-alt-f1)
> without getting a crash, reporting this: warning, unhandled interrupt
> 0xff63fc7f
>
> I can't shutdown the machine either; it's like it hanging in a loop
> reporting these 'unhandled interrupts' or so...
>
> As long as I don't try to close/reboot the machine, or go into a
> non-X
> state, it works.
>
> Now, I can disable the display manager and use 'startx' to come into
> X.
> This works, but if I run 'depmod -a; modprobe emu10k1' first, X
> reports
>
>
> '(WW) VGA: No matching Device section for instance (BusID PCI:0:12:0)
> found
> (WW) VGA: No matching Device section for instance (BusID PCI:1:0:0)
> found'
>
> In fact my soundblaster live value card did this before with an
> AMD-K6-3D 400MHz processor as well; it seems that the soundcard wants
> some resource that is necessary to run the X-server??
>
> I hope you can use this; keep up your good work!
>
> Regards, Henning Petersen
>
>
> ---------------------------
> STUFF HERE
> ---------------------------
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> This is a pre-release version of XFree86, and is not supported in any
> way. Bugs may be reported to [email protected] and patches
> submitted
> to [email protected]. Before reporting bugs in pre-release versions,
> please check the latest version in the XFree86 CVS repository
> (http://www.XFree86.Org/cvs)
>
> XFree86 Version 4.1.0.1 / X Window System
> (protocol Version 11, revision 0, vendor release 6510)
> Release Date: 21 December 2001
> If the server is older than 6-12 months, or if your card is
> newer than the above date, look for a newer version before
> reporting problems. (See http://www.XFree86.Org/FAQ)
> Build Operating System: Linux 2.4.13 i686 [ELF]
> Module Loader present
> (==) Log file: "/var/log/XFree86.0.log", Time: Mon Jul 8 20:47:01
> 2002
> (==) Using config file: "/root/XF86Config"
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??)
> unknown.
> (==) ServerLayout "Simple Layout"
> (**) |-->Screen "Screen 1" (0)
> (**) | |-->Monitor "My Monitor"
> (**) | |-->Device "2 the Max MAXColor S3 Trio64V+"
> (**) |-->Input Device "Mouse1"
> (**) |-->Input Device "Keyboard1"
> (**) XKB: rules: "xfree86"
> (**) XKB: model: "pc105"
> (**) XKB: layout: "dk"
> (**) FontPath set to
> "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75
>
dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts
>
/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
> (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> (==) ModulePath set to "/usr/X11R6/lib/modules"
> (--) using VT number 7
>
> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Module bitmap: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/libpcidata.a
> (II) Module pcidata: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 0.1.0
> (II) Loading /usr/X11R6/lib/modules/libscanpci.a
> (II) Module scanpci: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 0.1.0
> (II) Unloading /usr/X11R6/lib/modules/libscanpci.a
> (!!) More than one primary device found
> (--) PCI: (0:11:0) BrookTree unknown chipset (0x036e) rev 17, Mem @
> 0xef001000/1
> 2
> (--) PCI: (0:12:0) Creative Labs unknown chipset (0x0002) rev 8, I/O
> @
> 0xd400/5
> (--) PCI: (1:0:0) NVidia GeForce3 (rev 1) rev 163, Mem @
> 0xec000000/24,
> 0xe40000
> 00/26, 0xe8000000/19
> (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
> (II) Module dbe: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
> (II) Module extmod: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
> (II) Module type1: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
> (II) Module freetype: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.1.9
> (II) Loading /usr/X11R6/lib/modules/drivers/vga_drv.o
> (II) Module vga: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 4.0.0
> (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> (II) Module mouse: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> (II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
> (WW) VGA: No matching Device section for instance (BusID PCI:0:12:0)
> found
> (WW) VGA: No matching Device section for instance (BusID PCI:1:0:0)
> found
> (EE) No devices detected.
>
> Fatal server error:
> no screens found
>
> When reporting a problem related to a server crash, please send
> the full server output, not just the last messages.
> This can be found in the log file "/var/log/XFree86.0.log".
> Please report problems to [email protected].
>
> XIO: fatal IO error 104 (Connection reset by peer) on X server
> ":0.0"
> after 0 requests (0 known processed) with 0 events remaining.
>
>
>
>
>
>
> Linux version 2.4.18 (root@Tyr2) (gcc version 2.95.4 (Debian
> prerelease)) #1 SMP Sun Jun 16 00:15:13 CEST 2002
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
> On node 0 totalpages: 131056
> zone(0): 4096 pages.
> zone(1): 126960 pages.
> zone(2): 0 pages.
> Local APIC disabled by BIOS -- reenabling.
> Found and enabled local APIC!
> Kernel command line: BOOT_IMAGE=hpkerne2 ro root=305 hdc=ide-scsi
> ide_setup: hdc=ide-scsi
> Initializing CPU#0
> Detected 1544.691 MHz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 3080.19 BogoMIPS
> Memory: 512536k/524224k available (1806k kernel code, 11300k
> reserved,
> 545k data, 252k init, 0k highmem)
> Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
> Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
> Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
> CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 256K (64 bytes/line)
> CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
> CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> mtrr: v1.40 (20010327) Richard Gooch ([email protected])
> mtrr: detected mtrr type: Intel
> CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 256K (64 bytes/line)
> CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000
> Intel machine check reporting enabled on CPU#0.
> CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
> CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
> CPU0: AMD Athlon(tm) XP 1800+ stepping 02
> per-CPU timeslice cutoff: 731.51 usecs.
> SMP motherboard not detected.
> enabled ExtINT on CPU#0
> ESR value before enabling vector: 00000000
> ESR value after enabling vector: 00000000
> Using local APIC timer interrupts.
> calibrating APIC timer ...
> ..... CPU clock speed is 1544.6652 MHz.
> ..... host bus clock speed is 268.6374 MHz.
> cpu: 0, clocks: 2686374, slice: 1343187
> CPU0<T0:2686368,T1:1343168,D:13,S:1343187,C:2686374>
> Waiting on wait_init_idle (map = 0x0)
> All processors have done init_idle
> PCI: PCI BIOS revision 2.10 entry at 0xfb260, last bus=1
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> Unknown bridge resource 0: assuming transparent
> PCI: Using IRQ router default [1106/3099] at 00:00.0
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> Starting kswapd
> Journalled Block Device driver loaded
> NTFS driver v1.1.22 [Flags: R/O]
> udf: registering filesystem
> pty: 256 Unix98 ptys configured
> Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
> SERIAL_PCI enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> Real Time Clock Driver v1.10e
> block: 128 slots per queue, batch=32
> Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> VP_IDE: IDE controller on PCI bus 00 dev 89
> PCI: No IRQ known for interrupt pin A of device 00:11.1. Please try
> using pci=biosirq.
> VP_IDE: chipset revision 6
> VP_IDE: not 100% native mode: will probe irqs later
> VP_IDE: Unknown VIA SouthBridge, contact Vojtech Pavlik
> <[email protected]>
> hda: WDC WD400BB-32CFC0, ATA DISK drive
> hdc: PLEXTOR CD-R PX-W1210A, ATAPI CD/DVD-ROM drive
> hdd: Pioneer DVD-ROM ATAPIModel DVD-106S 012, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide0: probed IRQ 14 failed, using default.
> ide1 at 0x170-0x177,0x376 on irq 15
> ide1: probed IRQ 15 failed, using default.
> hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63
> hdd: ATAPI 40X DVD-ROM drive, 256kB Cache
> Uniform CD-ROM driver Revision: 3.12
> Partition check:
> hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 >
> Loading I2O Core - (c) Copyright 1999 Red Hat Software
> Linux I2O PCI support (c) 1999 Red Hat Software.
> i2o: Checking for PCI I2O controllers...
> I2O configuration manager v 0.04.
> (C) Copyright 1999 Red Hat Software
> I2O Block Storage OSM v0.9
> (c) Copyright 1999-2001 Red Hat Software.
> i2o_block: Checking for Boot device...
> i2o_block: Checking for I2O Block devices...
> I2O LAN OSM (C) 1999 University of Helsinki.
> 8139too Fast Ethernet driver 0.9.24
> eth0: RealTek RTL8139 Fast Ethernet at 0xe080d000, 00:50:fc:4b:fd:26,
> IRQ 11
> eth0: Identified 8139 chip type 'RTL-8139C'
> Universal TUN/TAP device driver 1.4 (C)1999-2001 Maxim Krasnyansky
> Linux agpgart interface v0.99 (c) Jeff Hartmann
> agpgart: Maximum main memory to use for agp memory: 439M
> agpgart: Detected Via Apollo Pro KT266 chipset
> agpgart: AGP aperture is 64M @ 0xe0000000
> SCSI subsystem driver Revision: 1.00
> scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> Vendor: PLEXTOR Model: CD-R PX-W1210A Rev: 1.05
> Type: CD-ROM ANSI SCSI revision: 02
> Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
> sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
> usb.c: registered new driver usbdevfs
> usb.c: registered new driver hub
> uhci.c: USB Universal Host Controller Interface driver v1.1
> uhci.c: USB UHCI at I/O 0xe000, IRQ 5
> usb.c: new USB bus registered, assigned bus number 1
> hub.c: USB hub found
> hub.c: 2 ports detected
> uhci.c: USB UHCI at I/O 0xe400, IRQ 5
> usb.c: new USB bus registered, assigned bus number 2
> hub.c: USB hub found
> hub.c: 2 ports detected
> i2o_scsi.c: Version 0.0.1
> chain_pool: 0 bytes @ dfee7e80
> (512 byte buffers X 4 can_queue X 0 i2o controllers)
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> IP: routing cache hash table of 4096 buckets, 32Kbytes
> TCP: Hash tables configured (established 32768 bind 32768)
> IPv4 over IPv4 tunneling driver
> GRE over IPv4 tunneling driver
> ip_conntrack (4095 buckets, 32760 max)
> ip_tables: (C) 2000-2002 Netfilter core team
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> VFS: Mounted root (ext3 filesystem) readonly.
> Freeing unused kernel memory: 252k freed
> Adding Swap: 497972k swap-space (priority -1)
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,5), internal journal
> nvidia: loading NVIDIA NVdriver Kernel Module 1.0-2802 Tue Mar 5
> 06:26:45 PST 2002
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> eth0: Setting half-duplex based on auto-negotiated partner ability
> 0000.
> spurious 8259A interrupt: IRQ7.
> NVRM: AGPGART: VIA Apollo KT133 chipset
> NVRM: AGPGART: aperture: 64M @ 0xe0000000
> NVRM: AGPGART: aperture mapped from 0xe0000000 to 0xe1988000
> NVRM: AGPGART: mode 4x
> NVRM: AGPGART: allocated 16 pages
> Creative EMU10K1 PCI Audio Driver, version 0.18, 23:08:05 Jul 8 2002
> PCI: Enabling device 00:0c.0 (0000 -> 0001)
> emu10k1: EMU10K1 rev 8 model 0x8027 found, IO at 0xd400-0xd41f, IRQ
> 11
> ac97_codec: AC97 codec, id: 0x5452:0x4123 (TriTech TR A5)
>
>
>
>
>
>
>
>
>
>
>
>
> =====
> o O Hennings tog \ | /
> o O OO - (_) -
> ___ =========== =========== / | \
> _U___|o| ... [ U U U U ] [ U U U U ]
> L______| [___] [_________] [_________]
> oo OOO oo oo oo oo oo oo
> ==================================================
>
> _____________________________________________________
> F?lg VM i fodbold p? t?t hold fra Yahoo!s officielle VM-side
> http://www.yahoo.dk/vm2002
>
_____________________________________________________
F? den nye Yahoo! Messenger p? http://www.yahoo.dk/messenger
Nu med webkamera, talechat, interaktive baggrunde og meget mere!
On Thu, 11 Jul 2002, Henning Petersen wrote:
> > nvidia: loading NVIDIA NVdriver Kernel Module 1.0-2802 Tue Mar 5
> > 06:26:45 PST 2002
Did your older computer also use the nvdriver? Can you reproduce this
using the opensource XFree86 nv driver? You can also try shuffling PCI
cards around or changing BIOS settings so that your sound card and video
card don't share interrupts (check /proc/interrupts)
Cheers,
Zwane
--
function.linuxpower.ca