>
> On 5 Aug 2002, Thomas Munck Steenholdt wrote:
>
> > So anyway - How should I go about determining the exact problem on my
> > box... I've had it all along, and I know for a fact that the hardware
> is
> > OK... Modules are loaded correctly, but it just does not work!
>
> Try me ...
> download aumix from http://jpj.net/~trevor/aumix/aumix-2.7.tar.gz
> and drag "Vol" and "Pcm" to appropriate level before you play any sound.
>
> Jeff
>
I'm afraid even that didn't help much - Only now I get a different kind of error... Before, trying to play a sound, the operation would just fisish immediatelyand a few noises were heard in the speakers... Now the operation never finishes - still no sound... and I found these error messages in dmesg..
dmesg:
--------------------------------------------------------------
Intel 810 + AC97 Audio, version 0.21, 11:44:41 Aug 6 2002
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH2 found at IO 0x1880 and 0x1c00, IRQ 11
i810_audio: Audio Controller supports 6 channels.
ac97_codec: AC97 Audio codec, id: 0x4144:0x5362 (Unknown)
i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present), total channels = 2
i810_audio: drain_dac, dma timeout?
Any more suggestions?
Thomas
-- Send gratis SMS og brug gratis e-mail p? Everyday.com --
On Tue, 6 Aug 2002, Thomas Munck Steenholdt wrote:
> I'm afraid even that didn't help much - Only now I get a different kind
> of error... Before, trying to play a sound, the operation would just
> fisish immediatelyand a few noises were heard in the speakers... Now the
> operation never finishes - still no sound... and I found these error
> messages in dmesg..
one last try ...
unload all network, scsi, modems. Bare minimum and see if the sound alone
would work. Again, use "aumix" before playing anything.
Jeff
>
> dmesg:
> --------------------------------------------------------------
> Intel 810 + AC97 Audio, version 0.21, 11:44:41 Aug 6 2002
> PCI: Setting latency timer of device 00:1f.5 to 64
> i810: Intel ICH2 found at IO 0x1880 and 0x1c00, IRQ 11
> i810_audio: Audio Controller supports 6 channels.
> ac97_codec: AC97 Audio codec, id: 0x4144:0x5362 (Unknown)
> i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present), total channels = 2
> i810_audio: drain_dac, dma timeout?
>
>
> Any more suggestions?
>
> Thomas
>
> -- Send gratis SMS og brug gratis e-mail p? Everyday.com --
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
>> I'm afraid even that didn't help much - Only now I get a different kind
>> of error... Before, trying to play a sound, the operation would just
>> fisish immediatelyand a few noises were heard in the speakers... Now the
>> operation never finishes - still no sound... and I found these error
>> messages in dmesg..
>
>one last try ...
>
>unload all network, scsi, modems. Bare minimum and see if the sound alone
>would work. Again, use "aumix" before playing anything.
>
>Jeff
>
Same situation with nothing loaded but the essential modules... heck I even unloaded the cdrom module and it's exactly the same as before... :-(
Thomas
-- Send gratis SMS og brug gratis e-mail p? Everyday.com --