Hey,
.config attached
sorry if some of these have been reported
found this at dmesg
---
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with
idebus=xx
hda: IBM-DKLA-22160, ATA DISK drive
Debug: sleeping function called from illegal context at slab.c:1374
c10f9ed4 c01328ef c0246b8a 0000055e c02d5d3c c02d5d74 c02d5d3c 00000000
c01320af c1069b88 000001d0 c01cf6d8 c1069b88 000001d0 00000046 c010900c
0000000e 00000000 c02d5d3c c02d5d2c c10c3200 c02d5c80 c01cf74d c02d5d3c
Call Trace: [<c01328ef>] [<c01320af>] [<c01cf6d8>] [<c010900c>]
[<c01cf74d>] [<c01d3918>] [<c01da910>] [<c01d3b29>] [<c01d3f38>]
[<c01d41f0>] [<c0105066>] [<c0105030>] [<c010557d>]
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: host protected area => 1
hda: 4233600 sectors (2168 MB) w/460KiB Cache, CHS=525/128/63
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
my /dev/input was empty, despite this in dmesg
---
input: PC Speaker
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
I couldn't get pcmcia serial working.
modprobe 8250_cs
still wvdial can't access /dev/tts/1
depmod errors
---
depmod: *** Unresolved symbols in /lib/modules/2.5.40/kernel/drivers/scsi/pcmcia/qlogic_cs.o
depmod: cli
depmod: restore_flags
depmod: save_flags
depmod: *** Unresolved symbols in /lib/modules/2.5.40/kernel/fs/xfs/xfs.o
depmod: run_task_queue
depmod: TQ_ACTIVE
depmod: queue_task
depmod: *** Unresolved symbols in /lib/modules/2.5.40/kernel/net/ipv4/netfilter/ipt_owner.o
depmod: next_thread
depmod: find_task_by_pid
depmod: *** Unresolved symbols in /lib/modules/2.5.40/kernel/sound/core/snd-pcm.o
depmod: snd_malloc_pci_pages
depmod: snd_free_pci_pages
sorry again, if some have been reported already
thanks
/ Brett