[1.] One line summary of the problem:
The compilation of the kernel 2.5.70 fails
[2.] Full description of the problem/report:
While making the bzImage, the process exits with the following
messages:
...
CC arch/i386/lib/usercopy.o
AS arch/i386/lib/getuser.o
CC arch/i386/lib/memcpy.o
CC arch/i386/lib/strstr.o
CC arch/i386/lib/dec_and_lock.o
AR arch/i386/lib/lib.a
CPP arch/i386/vmlinux.lds.s
GEN .version
CHK include/linux/compile.h
UPD include/linux/compile.h
CC init/version.o
LD init/built-in.o
LD vmlinux
sound/built-in.o(.text+0x9abb): In function `snd_rawmidi_dev_register':
: undefined reference to `snd_seq_device_new'
make: *** [vmlinux] Error 1
bolidino:~/linux-2.5.70# ls -l
total 312
[3.] Keywords (i.e., modules, networking, kernel):
kernel - make bzImage
[4.] Kernel version (from /proc/version):
Linux version 2.4.20 (root@bolidino) (gcc version 3.2.3) #1 SMP Thu May 29
23:45:20 CEST 2003
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
no oops seen
[6.] A small shell script or example program which triggers the
problem (if possible)
make bzImage
[7.] Environment
Debian testing distribution - bash shell - gcc 3.2
[7.1.] Software (add the output of the ver_linux script here)
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux bolidino 2.4.20 #1 SMP Thu May 29 23:45:20 CEST 2003 i686 GNU/Linux
Gnu C 3.3
Gnu make 3.80
util-linux 2.11z
mount 2.11z
module-init-tools 2.4.21
e2fsprogs 1.34-WIP
PPP 2.4.1
Linux C Library 2.3.1
Dynamic linker (ldd) 2.3.1
Procps 3.1.8
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.0
Modules Loaded nvidia rtc
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 6
model name : Celeron (Mendocino)
stepping : 5
cpu MHz : 551.266
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx fxsr
bogomips : 1101.00
[7.3.] Module information (from /proc/modules):
nvidia 1540320 10 (autoclean)
rtc 7612 0 (autoclean)
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(set)
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(set)
0cf8-0cff : PCI conf1
4000-403f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
5000-501f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
c000-c01f : Intel Corp. 82371AB/EB/MB PIIX4 USB
c400-c41f : Creative Labs SB Live! EMU10k1
c400-c41f : EMU10K1
c800-c807 : Creative Labs SB Live! MIDI/Game Port
cc00-ccff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
cc00-ccff : 8139too
d000-d007 : Triones Technologies, Inc. HPT366/368/370/370A/372
d000-d007 : ide2
d400-d403 : Triones Technologies, Inc. HPT366/368/370/370A/372
d402-d402 : ide2
d800-d8ff : Triones Technologies, Inc. HPT366/368/370/370A/372
d800-d807 : ide2
d810-d8ff : HPT366
dc00-dc07 : Triones Technologies, Inc. HPT366/368/370/370A/372 (#2)
e000-e003 : Triones Technologies, Inc. HPT366/368/370/370A/372 (#2)
e400-e4ff : Triones Technologies, Inc. HPT366/368/370/370A/372 (#2)
e400-e407 : ide3
e410-e4ff : HPT366
f000-f00f : Intel Corp. 82371AB/EB/MB PIIX4 IDE
f000-f007 : ide0
f008-f00f : ide1
=====
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000d0000-000d17ff : Extension ROM
000f0000-000fffff : System ROM
00100000-0ffeffff : System RAM
00100000-0028ab4a : Kernel code
0028ab4b-00311d23 : Kernel data
0fff0000-0fff2fff : ACPI Non-volatile Storage
0fff3000-0fffffff : ACPI Tables
d0000000-d7ffffff : Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
d8000000-dfffffff : PCI Bus #01
d8000000-dfffffff : nVidia Corporation NV11 [GeForce2 MX DDR]
e0000000-e1ffffff : PCI Bus #01
e0000000-e0ffffff : nVidia Corporation NV11 [GeForce2 MX DDR]
e3000000-e30000ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
e3000000-e30000ff : 8139too
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
bolidino:~/linux-2.5.70/scripts# lspci -vvv
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
(rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 1.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW-
Rate=x2
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
(rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: e0000000-e1ffffff
Prefetchable memory behind bridge: d8000000-dfffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
(prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at f000 [size=16]
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
(prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at c000 [size=32]
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:0b.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev
05)
Subsystem: Creative Labs CT4850 SBLive! Value
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at c400 [size=32]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.1 Input device controller: Creative Labs SB Live! MIDI/Game Port
(rev 05)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 0: I/O ports at c800 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at cc00 [size=256]
Region 1: Memory at e3000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:13.0 Unknown mass storage controller: Triones Technologies, Inc.
HPT366/368/370/370A/372 (rev 01)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 120 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at d000 [size=8]
Region 1: I/O ports at d400 [size=4]
Region 4: I/O ports at d800 [size=256]
Expansion ROM at <unassigned> [disabled] [size=128K]
00:13.1 Unknown mass storage controller: Triones Technologies, Inc.
HPT366/368/370/370A/372 (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 120 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin B routed to IRQ 18
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at e000 [size=4]
Region 4: I/O ports at e400 [size=256]
01:00.0 VGA compatible controller: nVidia Corporation NV11DDR [GeForce2 MX
100 DDR/200 DDR] (rev b2) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64-
HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW-
Rate=x2
[7.6.] SCSI information (from /proc/scsi/scsi)
cat: /proc/scsi/scsi: No such file or directory
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
[X.] Other notes, patches, fixes, workarounds:
the ue of gcc-3.3 in place of gcc-3.2 did not help.
Hopefully will this bug report be in some way useful. Good Luck!
On Fri, May 30, 2003 at 11:32:21PM +0200, Fabio Bracci wrote:
>
> [1.] One line summary of the problem:
> The compilation of the kernel 2.5.70 fails
> [2.] Full description of the problem/report:
> While making the bzImage, the process exits with the following
> messages:
> ...
> CC arch/i386/lib/usercopy.o
> AS arch/i386/lib/getuser.o
> CC arch/i386/lib/memcpy.o
> CC arch/i386/lib/strstr.o
> CC arch/i386/lib/dec_and_lock.o
> AR arch/i386/lib/lib.a
> CPP arch/i386/vmlinux.lds.s
> GEN .version
> CHK include/linux/compile.h
> UPD include/linux/compile.h
> CC init/version.o
> LD init/built-in.o
> LD vmlinux
> sound/built-in.o(.text+0x9abb): In function `snd_rawmidi_dev_register':
> : undefined reference to `snd_seq_device_new'
> make: *** [vmlinux] Error 1
>...
Please send your .config.
TIA
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Sat, 2003-05-31 at 00:27, Adrian Bunk wrote:
> On Fri, May 30, 2003 at 11:32:21PM +0200, Fabio Bracci wrote:
> >
> > [1.] One line summary of the problem:
> > The compilation of the kernel 2.5.70 fails
> > [2.] Full description of the problem/report:
> > While making the bzImage, the process exits with the following
> > messages:
> > ...
> > CC arch/i386/lib/usercopy.o
> > AS arch/i386/lib/getuser.o
> > CC arch/i386/lib/memcpy.o
> > CC arch/i386/lib/strstr.o
> > CC arch/i386/lib/dec_and_lock.o
> > AR arch/i386/lib/lib.a
> > CPP arch/i386/vmlinux.lds.s
> > GEN .version
> > CHK include/linux/compile.h
> > UPD include/linux/compile.h
> > CC init/version.o
> > LD init/built-in.o
> > LD vmlinux
> > sound/built-in.o(.text+0x9abb): In function `snd_rawmidi_dev_register':
> > : undefined reference to `snd_seq_device_new'
> > make: *** [vmlinux] Error 1
> >...
>
> Please send your .config.
>
> TIA
> Adrian
Hi
Hereby I have attached the requested .conf file ("config.2.5.70").
I tried again to compile a kernel, but now using the 2.5.72 one. But
again something went wrong while compiling the sound subsystem. That's
why I attacched also the new .conf file ("config.2.5.70").
I now got the following messages:
...
LD lib/zlib_deflate/built-in.o
CC lib/zlib_inflate/infblock.o
CC lib/zlib_inflate/infcodes.o
CC lib/zlib_inflate/inffast.o
CC lib/zlib_inflate/inflate.o
CC lib/zlib_inflate/inftrees.o
CC lib/zlib_inflate/infutil.o
CC lib/zlib_inflate/inflate_syms.o
LD lib/zlib_inflate/zlib_inflate.o
LD lib/zlib_inflate/built-in.o
HOSTCC lib/gen_crc32table
GEN lib/crc32table.h
CC lib/crc32.o
LD lib/built-in.o
CC lib/bust_spinlocks.o
CC lib/cmdline.o
CC lib/ctype.o
CC lib/dump_stack.o
CC lib/errno.o
CC lib/idr.o
CC lib/kobject.o
CC lib/percpu_counter.o
CC lib/radix-tree.o
CC lib/rbtree.o
CC lib/rwsem.o
CC lib/string.o
CC lib/vsprintf.o
AR lib/lib.a
LD arch/i386/lib/built-in.o
AS arch/i386/lib/checksum.o
CC arch/i386/lib/dec_and_lock.o
CC arch/i386/lib/delay.o
AS arch/i386/lib/getuser.o
CC arch/i386/lib/memcpy.o
CC arch/i386/lib/strstr.o
CC arch/i386/lib/usercopy.o
AR arch/i386/lib/lib.a
CPP arch/i386/vmlinux.lds.s
GEN .version
CHK include/linux/compile.h
UPD include/linux/compile.h
CC init/version.o
LD init/built-in.o
LD vmlinux
sound/built-in.o(.text+0x1b6ea): In function `snd_rawmidi_dev_register':
: undefined reference to `snd_seq_device_new'
sound/built-in.o(.text+0x22fb8): In function `snd_card_emu10k1_probe':
: undefined reference to `snd_seq_device_new'
make: *** [vmlinux] Error 1
Hopefully this will help.
Greetings,
Fabio
On Fri, Jun 20, 2003 at 11:04:47PM +0200, Fabio Bracci wrote:
> Hi
> Hereby I have attached the requested .conf file ("config.2.5.70").
> I tried again to compile a kernel, but now using the 2.5.72 one. But
> again something went wrong while compiling the sound subsystem. That's
> why I attacched also the new .conf file ("config.2.5.70").
> I now got the following messages:
> ...
>...
> LD vmlinux
> sound/built-in.o(.text+0x1b6ea): In function `snd_rawmidi_dev_register':
> : undefined reference to `snd_seq_device_new'
> sound/built-in.o(.text+0x22fb8): In function `snd_card_emu10k1_probe':
> : undefined reference to `snd_seq_device_new'
> make: *** [vmlinux] Error 1
>
>
> Hopefully this will help.
Yup, thanks a lot!
> Greetings,
> Fabio ...
>...
> #
> # Advanced Linux Sound Architecture
> #
> CONFIG_SND=y
> CONFIG_SND_SEQUENCER=m
> CONFIG_SND_SEQ_DUMMY=m
> # CONFIG_SND_OSSEMUL is not set
> CONFIG_SND_RTCTIMER=m
> CONFIG_SND_VERBOSE_PRINTK=y
> # CONFIG_SND_DEBUG is not set
>...
> CONFIG_SND_EMU10K1=y
>...
This is a bug in several ALSA drivers.
@Fabio:
As a workaround, compile "Sequencer support" statically (non-modular).
@Jaroslav:
Several drivers have a wrong logic for CONFIG_SND_SEQUENCER. The correct
solution is something like the following:
--- sound/pci/emu10k1/emu10k1.c.old 2003-06-21 03:02:04.000000000 +0200
+++ sound/pci/emu10k1/emu10k1.c 2003-06-21 03:02:31.000000000 +0200
@@ -35,7 +35,7 @@
MODULE_DEVICES("{{Creative Labs,SB Live!/PCI512/E-mu APS},"
"{Creative Labs,SB Audigy}}");
-#if defined(CONFIG_SND_SEQUENCER) || defined(CONFIG_SND_SEQUENCER_MODULE)
+#if defined(CONFIG_SND_SEQUENCER) || (defined (MODULE) && defined(CONFIG_SND_SEQUENCER_MODULE))
#define ENABLE_SYNTH
#include <sound/emu10k1_synth.h>
#endif
If you comfirm this is correct I'll send a fix for all affected drivers.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Sat, 21 Jun 2003, Adrian Bunk wrote:
> @Jaroslav:
> Several drivers have a wrong logic for CONFIG_SND_SEQUENCER. The correct
> solution is something like the following:
>
> --- sound/pci/emu10k1/emu10k1.c.old 2003-06-21 03:02:04.000000000 +0200
> +++ sound/pci/emu10k1/emu10k1.c 2003-06-21 03:02:31.000000000 +0200
> @@ -35,7 +35,7 @@
> MODULE_DEVICES("{{Creative Labs,SB Live!/PCI512/E-mu APS},"
> "{Creative Labs,SB Audigy}}");
>
> -#if defined(CONFIG_SND_SEQUENCER) || defined(CONFIG_SND_SEQUENCER_MODULE)
> +#if defined(CONFIG_SND_SEQUENCER) || (defined (MODULE) && defined(CONFIG_SND_SEQUENCER_MODULE))
> #define ENABLE_SYNTH
> #include <sound/emu10k1_synth.h>
> #endif
>
> If you comfirm this is correct I'll send a fix for all affected drivers.
Yes, it's correct. I fixed our code. The fix will be in the next ALSA
2.5 update. Thanks.
Jaroslav
-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project, SuSE Labs