From: Shaibal Dutta <[email protected]>
Allow the scheduler to select the best CPU to handle hub initalization
and LED blinking work. This extends idle residency times on idle CPUs
and conserves power.
This functionality is enabled when CONFIG_WQ_POWER_EFFICIENT is selected.
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Alan Stern <[email protected]>
Cc: Sarah Sharp <[email protected]>
Cc: Xenia Ragiadakou <[email protected]>
Cc: Julius Werner <[email protected]>
Cc: Krzysztof Mazur <[email protected]>
Cc: Matthias Beyer <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Mathias Nyman <[email protected]>
Cc: Thomas Pugliese <[email protected]>
Signed-off-by: Shaibal Dutta <[email protected]>
[[email protected]: Rebased to latest kernel. Added commit message.
Changed reference from system to power efficient workqueue for LEDs in
check_highspeed() and hub_port_connect_change().]
Signed-off-by: Zoran Markovic <[email protected]>
---
drivers/usb/core/hub.c | 23 +++++++++++++++--------
1 file changed, 15 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index babba88..ae07ffe 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -504,7 +504,8 @@ static void led_work (struct work_struct *work)
changed++;
}
if (changed)
- schedule_delayed_work(&hub->leds, LED_CYCLE_PERIOD);
+ queue_delayed_work(system_power_efficient_wq,
+ &hub->leds, LED_CYCLE_PERIOD);
}
/* use a short timeout for hub/port status fetches */
@@ -1046,8 +1047,9 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
if (type == HUB_INIT) {
delay = hub_power_on(hub, false);
PREPARE_DELAYED_WORK(&hub->init_work, hub_init_func2);
- schedule_delayed_work(&hub->init_work,
- msecs_to_jiffies(delay));
+ queue_delayed_work(system_power_efficient_wq,
+ &hub->init_work,
+ msecs_to_jiffies(delay));
/* Suppress autosuspend until init is done */
usb_autopm_get_interface_no_resume(
@@ -1200,8 +1202,9 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
/* Don't do a long sleep inside a workqueue routine */
if (type == HUB_INIT2) {
PREPARE_DELAYED_WORK(&hub->init_work, hub_init_func3);
- schedule_delayed_work(&hub->init_work,
- msecs_to_jiffies(delay));
+ queue_delayed_work(system_power_efficient_wq,
+ &hub->init_work,
+ msecs_to_jiffies(delay));
return; /* Continues at init3: below */
} else {
msleep(delay);
@@ -1214,7 +1217,8 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
if (status < 0)
dev_err(hub->intfdev, "activate --> %d\n", status);
if (hub->has_indicators && blinkenlights)
- schedule_delayed_work(&hub->leds, LED_CYCLE_PERIOD);
+ queue_delayed_work(system_power_efficient_wq,
+ &hub->leds, LED_CYCLE_PERIOD);
/* Scan all ports that need attention */
kick_khubd(hub);
@@ -4316,7 +4320,8 @@ check_highspeed (struct usb_hub *hub, struct usb_device *udev, int port1)
/* hub LEDs are probably harder to miss than syslog */
if (hub->has_indicators) {
hub->indicator[port1-1] = INDICATOR_GREEN_BLINK;
- schedule_delayed_work (&hub->leds, 0);
+ queue_delayed_work(system_power_efficient_wq,
+ &hub->leds, 0);
}
}
kfree(qual);
@@ -4545,7 +4550,9 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
if (hub->has_indicators) {
hub->indicator[port1-1] =
INDICATOR_AMBER_BLINK;
- schedule_delayed_work (&hub->leds, 0);
+ queue_delayed_work(
+ system_power_efficient_wq,
+ &hub->leds, 0);
}
status = -ENOTCONN; /* Don't retry */
goto loop_disable;
--
1.7.9.5
On Fri, 31 Jan 2014, Zoran Markovic wrote:
> From: Shaibal Dutta <[email protected]>
>
> Allow the scheduler to select the best CPU to handle hub initalization
> and LED blinking work. This extends idle residency times on idle CPUs
> and conserves power.
>
> This functionality is enabled when CONFIG_WQ_POWER_EFFICIENT is selected.
...
> @@ -1046,8 +1047,9 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
> if (type == HUB_INIT) {
> delay = hub_power_on(hub, false);
> PREPARE_DELAYED_WORK(&hub->init_work, hub_init_func2);
> - schedule_delayed_work(&hub->init_work,
> - msecs_to_jiffies(delay));
> + queue_delayed_work(system_power_efficient_wq,
> + &hub->init_work,
> + msecs_to_jiffies(delay));
I have no objection to selecting the power-efficient work queue, but
please don't change the indentation of the existing code. The style
used throughout (most of) the USB core is that continuation lines are
indented by two tab stops more than the first line of the statement.
Alan Stern