On Sun, Nov 03, 2002 at 12:30:17PM +0700, Andika Triwidada wrote:
> This patch will allow 2.5.45 make modules_install
> I'm not sure the best way to say that drivers/net/pcmcia/smc91c92_cs.c
> needs exports from drivers/net/mii.c. But at least this modification
> allows my kernel compile error free.
>
>
> --- linux-2.5.44/drivers/net/Makefile.orig 2002-10-19 11:01:19.000000000 +0700
> +++ linux-2.5.44/drivers/net/Makefile 2002-11-02 22:00:02.000000000 +0700
> @@ -78,7 +78,7 @@
> obj-$(CONFIG_NET_SB1000) += sb1000.o
> obj-$(CONFIG_MAC8390) += daynaport.o 8390.o
> obj-$(CONFIG_APNE) += apne.o 8390.o
> -obj-$(CONFIG_PCMCIA_PCNET) += 8390.o
> +obj-$(CONFIG_PCMCIA_PCNET) += 8390.o mii.o
> obj-$(CONFIG_SHAPER) += shaper.o
> obj-$(CONFIG_SK_G16) += sk_g16.o
> obj-$(CONFIG_HP100) += hp100.o
It has definitely nothing to do with CONFIG_PCMCIA_PCNET.
The following (untested) patch should be correct:
--- linux-2.5.49/drivers/net/Makefile.old 2002-11-26 22:20:27.000000000 +0100
+++ linux-2.5.49/drivers/net/Makefile 2002-11-26 22:21:34.000000000 +0100
@@ -79,6 +79,7 @@
obj-$(CONFIG_MAC8390) += mac8390.o 8390.o
obj-$(CONFIG_APNE) += apne.o 8390.o
obj-$(CONFIG_PCMCIA_PCNET) += 8390.o
+obj-$(CONFIG_PCMCIA_SMC91C92) += mii.o
obj-$(CONFIG_SHAPER) += shaper.o
obj-$(CONFIG_SK_G16) += sk_g16.o
obj-$(CONFIG_HP100) += hp100.o
> -- andika
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Tue, 26 Nov 2002, Adrian Bunk wrote:
> It has definitely nothing to do with CONFIG_PCMCIA_PCNET.
>
> The following (untested) patch should be correct:
>
> --- linux-2.5.49/drivers/net/Makefile.old 2002-11-26 22:20:27.000000000 +0100
> +++ linux-2.5.49/drivers/net/Makefile 2002-11-26 22:21:34.000000000 +0100
> @@ -79,6 +79,7 @@
> obj-$(CONFIG_MAC8390) += mac8390.o 8390.o
> obj-$(CONFIG_APNE) += apne.o 8390.o
> obj-$(CONFIG_PCMCIA_PCNET) += 8390.o
> +obj-$(CONFIG_PCMCIA_SMC91C92) += mii.o
> obj-$(CONFIG_SHAPER) += shaper.o
> obj-$(CONFIG_SK_G16) += sk_g16.o
> obj-$(CONFIG_HP100) += hp100.o
That looks correct, i probably broke that when i added stuff from mii.c
without modifying the Makefile
Thanks,
Zwane
--
function.linuxpower.ca