This patch converts OSS opl3sa2 over to the new PnP layer as well as
merging the changes in the 2.4 tree. The driver has been tested on an
opl3sa3. The driver currently doesn't work in pnp mode.
Please apply
Index: linux-2.5.52/sound/oss/opl3sa2.c
===================================================================
RCS file: /build/cvsroot/linux-2.5.52/sound/oss/opl3sa2.c,v
retrieving revision 1.1.1.1
diff -u -r1.1.1.1 opl3sa2.c
--- linux-2.5.52/sound/oss/opl3sa2.c 16 Dec 2002 05:17:04 -0000 1.1.1.1
+++ linux-2.5.52/sound/oss/opl3sa2.c 16 Dec 2002 07:38:44 -0000
@@ -56,7 +56,9 @@
* Scott Murray Some small cleanups to the init code output.
* (Jan 7, 2001)
* Zwane Mwaikambo Added PM support. (Dec 4 2001)
- *
+ * Zwane Mwaikambo Code, data structure cleanups. (Feb 15 2002)
+ * Zwane Mwaikambo Free resources during auxiliary device probe
+ * failures (Apr 29 2002)
* Adam Belay Converted driver to new PnP Layer (Oct 12, 2002)
*/
@@ -66,11 +68,15 @@
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/pm.h>
+#include <linux/delay.h>
#include "sound_config.h"
#include "ad1848.h"
#include "mpu401.h"
+#define OPL3SA2_MODULE_NAME "opl3sa2"
+#define PFX OPL3SA2_MODULE_NAME ": "
+
/* Useful control port indexes: */
#define OPL3SA2_PM 0x01
#define OPL3SA2_SYS_CTRL 0x02
@@ -91,9 +97,10 @@
#define DEFAULT_TIMBRE 0
/* Power saving modes */
-#define OPL3SA2_PM_MODE1 0x05
-#define OPL3SA2_PM_MODE2 0x04
-#define OPL3SA2_PM_MODE3 0x03
+#define OPL3SA2_PM_MODE0 0x00
+#define OPL3SA2_PM_MODE1 0x04 /* PSV */
+#define OPL3SA2_PM_MODE2 0x05 /* PSV | PDX */
+#define OPL3SA2_PM_MODE3 0x27 /* ADOWN | PSV | PDN | PDX */
/* For checking against what the card returns: */
#define VERSION_UNKNOWN 0
@@ -107,6 +114,7 @@
#define CHIPSET_UNKNOWN -1
#define CHIPSET_OPL3SA2 0
#define CHIPSET_OPL3SA3 1
+static const char *CHIPSET_TABLE[] = {"OPL3-SA2", "OPL3-SA3"};
#ifdef CONFIG_PNP
#define OPL3SA2_CARDS_MAX 4
@@ -117,40 +125,42 @@
/* This should be pretty obvious */
static int opl3sa2_cards_num; /* = 0 */
-/* What's my version(s)? */
-static int chipset[OPL3SA2_CARDS_MAX] = { CHIPSET_UNKNOWN };
-
-/* Oh well, let's just cache the name(s) */
-static char chipset_name[OPL3SA2_CARDS_MAX][12];
+typedef struct {
+ /* device resources */
+ unsigned short cfg_port;
+ struct address_info cfg;
+ struct address_info cfg_mss;
+ struct address_info cfg_mpu;
-/* Where's my mixer(s)? */
-static int opl3sa2_mixer[OPL3SA2_CARDS_MAX] = { -1 };
+#ifdef CONFIG_PNP
+ /* PnP Stuff */
+ struct pnp_dev* pdev;
+ int activated; /* Whether said devices have been activated */
+#endif
-/* Bag o' mixer data */
-typedef struct opl3sa2_mixerdata_tag {
- unsigned short cfg_port;
- unsigned short padding;
- unsigned char reg;
- unsigned int in_suspend;
- struct pm_dev *pmdev;
- unsigned int card;
- unsigned int volume_l;
- unsigned int volume_r;
- unsigned int mic;
- unsigned int bass_l;
- unsigned int bass_r;
- unsigned int treble_l;
- unsigned int treble_r;
- unsigned int wide_l;
- unsigned int wide_r;
-} opl3sa2_mixerdata;
-static opl3sa2_mixerdata opl3sa2_data[OPL3SA2_CARDS_MAX];
-
-static struct address_info cfg[OPL3SA2_CARDS_MAX];
-static struct address_info cfg_mss[OPL3SA2_CARDS_MAX];
-static struct address_info cfg_mpu[OPL3SA2_CARDS_MAX];
+#ifdef CONFIG_PM
+ unsigned int in_suspend;
+ struct pm_dev *pmdev;
+#endif
+ unsigned int card;
+ int chipset; /* What's my version(s)? */
+ char *chipset_name;
+
+ /* mixer data */
+ int mixer;
+ unsigned int volume_l;
+ unsigned int volume_r;
+ unsigned int mic;
+ unsigned int bass_l;
+ unsigned int bass_r;
+ unsigned int treble_l;
+ unsigned int treble_r;
+ unsigned int wide_l;
+ unsigned int wide_r;
+} opl3sa2_state_t;
+static opl3sa2_state_t opl3sa2_state[OPL3SA2_CARDS_MAX];
-static spinlock_t lock=SPIN_LOCK_UNLOCKED;
+static spinlock_t opl3sa2_lock = SPIN_LOCK_UNLOCKED;
/* Our parameters */
static int __initdata io = -1;
@@ -236,12 +246,11 @@
*data = inb(port + 1);
}
-
/*
* All of the mixer functions...
*/
-static void opl3sa2_set_volume(opl3sa2_mixerdata* devc, int left, int right)
+static void opl3sa2_set_volume(opl3sa2_state_t* devc, int left, int right)
{
static unsigned char scale[101] = {
0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0e, 0x0e, 0x0e,
@@ -276,7 +285,7 @@
}
-static void opl3sa2_set_mic(opl3sa2_mixerdata* devc, int level)
+static void opl3sa2_set_mic(opl3sa2_state_t* devc, int level)
{
unsigned char vol = 0x1F;
@@ -291,7 +300,7 @@
}
-static void opl3sa3_set_bass(opl3sa2_mixerdata* devc, int left, int right)
+static void opl3sa3_set_bass(opl3sa2_state_t* devc, int left, int right)
{
unsigned char bass;
@@ -302,7 +311,7 @@
}
-static void opl3sa3_set_treble(opl3sa2_mixerdata* devc, int left, int right)
+static void opl3sa3_set_treble(opl3sa2_state_t* devc, int left, int right)
{
unsigned char treble;
@@ -313,7 +322,7 @@
}
-static void opl3sa3_set_wide(opl3sa2_mixerdata* devc, int left, int right)
+static void opl3sa3_set_wide(opl3sa2_state_t* devc, int left, int right)
{
unsigned char wide;
@@ -324,16 +333,16 @@
}
-static void opl3sa2_mixer_reset(opl3sa2_mixerdata* devc, int card)
+static void opl3sa2_mixer_reset(opl3sa2_state_t* devc)
{
- if(devc) {
+ if (devc) {
opl3sa2_set_volume(devc, DEFAULT_VOLUME, DEFAULT_VOLUME);
devc->volume_l = devc->volume_r = DEFAULT_VOLUME;
opl3sa2_set_mic(devc, DEFAULT_MIC);
devc->mic = DEFAULT_MIC;
- if(chipset[card] == CHIPSET_OPL3SA3) {
+ if (devc->chipset == CHIPSET_OPL3SA3) {
opl3sa3_set_bass(devc, DEFAULT_TIMBRE, DEFAULT_TIMBRE);
devc->bass_l = devc->bass_r = DEFAULT_TIMBRE;
opl3sa3_set_treble(devc, DEFAULT_TIMBRE, DEFAULT_TIMBRE);
@@ -343,13 +352,13 @@
}
-static void opl3sa2_mixer_restore(opl3sa2_mixerdata* devc, int card)
+static void opl3sa2_mixer_restore(opl3sa2_state_t* devc)
{
if (devc) {
opl3sa2_set_volume(devc, devc->volume_l, devc->volume_r);
opl3sa2_set_mic(devc, devc->mic);
- if (chipset[card] == CHIPSET_OPL3SA3) {
+ if (devc->chipset == CHIPSET_OPL3SA3) {
opl3sa3_set_bass(devc, devc->bass_l, devc->bass_r);
opl3sa3_set_treble(devc, devc->treble_l, devc->treble_r);
}
@@ -391,7 +400,7 @@
{
int cmdf = cmd & 0xff;
- opl3sa2_mixerdata* devc = (opl3sa2_mixerdata*) mixer_devs[dev]->devc;
+ opl3sa2_state_t* devc = &opl3sa2_state[dev];
switch(cmdf) {
case SOUND_MIXER_VOLUME:
@@ -474,7 +483,7 @@
{
int cmdf = cmd & 0xff;
- opl3sa2_mixerdata* devc = (opl3sa2_mixerdata*) mixer_devs[dev]->devc;
+ opl3sa2_state_t* devc = &opl3sa2_state[dev];
switch(cmdf) {
case SOUND_MIXER_BASS:
@@ -584,9 +593,9 @@
}
-static inline void __init attach_opl3sa2_mpu(struct address_info* hw_config)
+static inline int __init attach_opl3sa2_mpu(struct address_info* hw_config)
{
- attach_mpu401(hw_config, THIS_MODULE);
+ return attach_mpu401(hw_config, THIS_MODULE);
}
@@ -617,7 +626,7 @@
AD1848_REROUTE(SOUND_MIXER_LINE3, SOUND_MIXER_LINE);
}
else {
- printk(KERN_ERR "opl3sa2: MSS mixer not installed?\n");
+ printk(KERN_ERR PFX "MSS mixer not installed?\n");
}
}
}
@@ -634,15 +643,14 @@
unsigned char misc;
unsigned char tmp;
unsigned char version;
- char tag;
/*
- * Verify that the I/O port range is free.
+ * Try and allocate our I/O port range.
*/
- if(check_region(hw_config->io_base, 2)) {
- printk(KERN_ERR "opl3sa2: Control I/O port %#x not free\n",
+ if(!request_region(hw_config->io_base, 2, OPL3SA2_MODULE_NAME)) {
+ printk(KERN_ERR PFX "Control I/O port %#x not free\n",
hw_config->io_base);
- return 0;
+ goto out_nodev;
}
/*
@@ -653,9 +661,9 @@
opl3sa2_write(hw_config->io_base, OPL3SA2_MISC, misc ^ 0x07);
opl3sa2_read(hw_config->io_base, OPL3SA2_MISC, &tmp);
if(tmp != misc) {
- printk(KERN_ERR "opl3sa2: Control I/O port %#x is not a YMF7xx chipset!\n",
+ printk(KERN_ERR PFX "Control I/O port %#x is not a YMF7xx chipset!\n",
hw_config->io_base);
- return 0;
+ goto out_region;
}
/*
@@ -666,9 +674,9 @@
opl3sa2_read(hw_config->io_base, OPL3SA2_MIC, &tmp);
if((tmp & 0x9f) != 0x8a) {
printk(KERN_ERR
- "opl3sa2: Control I/O port %#x is not a YMF7xx chipset!\n",
+ PFX "Control I/O port %#x is not a YMF7xx chipset!\n",
hw_config->io_base);
- return 0;
+ goto out_region;
}
opl3sa2_write(hw_config->io_base, OPL3SA2_MIC, tmp);
@@ -679,56 +687,54 @@
* of the miscellaneous register.
*/
version = misc & 0x07;
- printk(KERN_DEBUG "opl3sa2: chipset version = %#x\n", version);
+ printk(KERN_DEBUG PFX "chipset version = %#x\n", version);
switch(version) {
case 0:
- chipset[card] = CHIPSET_UNKNOWN;
- tag = '?'; /* silence compiler warning */
+ opl3sa2_state[card].chipset = CHIPSET_UNKNOWN;
printk(KERN_ERR
- "opl3sa2: Unknown Yamaha audio controller version\n");
+ PFX "Unknown Yamaha audio controller version\n");
break;
case VERSION_YMF711:
- chipset[card] = CHIPSET_OPL3SA2;
- tag = '2';
- printk(KERN_INFO "opl3sa2: Found OPL3-SA2 (YMF711)\n");
+ opl3sa2_state[card].chipset = CHIPSET_OPL3SA2;
+ printk(KERN_INFO PFX "Found OPL3-SA2 (YMF711)\n");
break;
case VERSION_YMF715:
- chipset[card] = CHIPSET_OPL3SA3;
- tag = '3';
+ opl3sa2_state[card].chipset = CHIPSET_OPL3SA3;
printk(KERN_INFO
- "opl3sa2: Found OPL3-SA3 (YMF715 or YMF719)\n");
+ PFX "Found OPL3-SA3 (YMF715 or YMF719)\n");
break;
case VERSION_YMF715B:
- chipset[card] = CHIPSET_OPL3SA3;
- tag = '3';
+ opl3sa2_state[card].chipset = CHIPSET_OPL3SA3;
printk(KERN_INFO
- "opl3sa2: Found OPL3-SA3 (YMF715B or YMF719B)\n");
+ PFX "Found OPL3-SA3 (YMF715B or YMF719B)\n");
break;
case VERSION_YMF715E:
default:
- chipset[card] = CHIPSET_OPL3SA3;
- tag = '3';
+ opl3sa2_state[card].chipset = CHIPSET_OPL3SA3;
printk(KERN_INFO
- "opl3sa2: Found OPL3-SA3 (YMF715E or YMF719E)\n");
+ PFX "Found OPL3-SA3 (YMF715E or YMF719E)\n");
break;
}
- if(chipset[card] != CHIPSET_UNKNOWN) {
+ if(opl3sa2_state[card].chipset != CHIPSET_UNKNOWN) {
/* Generate a pretty name */
- sprintf(chipset_name[card], "OPL3-SA%c", tag);
- return 1;
+ opl3sa2_state[card].chipset_name = (char *)CHIPSET_TABLE[opl3sa2_state[card].chipset];
+ return 0;
}
- return 0;
+
+out_region:
+ release_region(hw_config->io_base, 2);
+out_nodev:
+ return -ENODEV;
}
static void __init attach_opl3sa2(struct address_info* hw_config, int card)
{
- request_region(hw_config->io_base, 2, chipset_name[card]);
/* Initialize IRQ configuration to IRQ-B: -, IRQ-A: WSS+MPU+OPL3 */
opl3sa2_write(hw_config->io_base, OPL3SA2_IRQ_CONFIG, 0x0d);
@@ -748,30 +754,28 @@
static void __init attach_opl3sa2_mixer(struct address_info *hw_config, int card)
{
struct mixer_operations* mixer_operations;
- opl3sa2_mixerdata* devc;
+ opl3sa2_state_t* devc = &opl3sa2_state[card];
/* Install master mixer */
- if(chipset[card] == CHIPSET_OPL3SA3) {
+ if(devc->chipset == CHIPSET_OPL3SA3) {
mixer_operations = &opl3sa3_mixer_operations;
}
else {
mixer_operations = &opl3sa2_mixer_operations;
}
- if((devc = &opl3sa2_data[card])) {
- devc->cfg_port = hw_config->io_base;
-
- opl3sa2_mixer[card] = sound_install_mixer(MIXER_DRIVER_VERSION,
- mixer_operations->name,
- mixer_operations,
- sizeof(struct mixer_operations),
- devc);
- if(opl3sa2_mixer[card] < 0) {
- printk(KERN_ERR "opl3sa2: Could not install %s master mixer\n",
- mixer_operations->name);
- }
- else
- opl3sa2_mixer_reset(devc, card);
+ devc->cfg_port = hw_config->io_base;
+ devc->mixer = sound_install_mixer(MIXER_DRIVER_VERSION,
+ mixer_operations->name,
+ mixer_operations,
+ sizeof(struct mixer_operations),
+ devc);
+ if(devc->mixer < 0) {
+ printk(KERN_ERR PFX "Could not install %s master mixer\n",
+ mixer_operations->name);
+ }
+ else {
+ opl3sa2_mixer_reset(devc);
}
}
@@ -799,13 +803,12 @@
*/
if(ymode >= 0 && ymode <= 3) {
unsigned char sys_ctrl;
-
opl3sa2_read(hw_config->io_base, OPL3SA2_SYS_CTRL, &sys_ctrl);
sys_ctrl = (sys_ctrl & 0xcf) | ((ymode & 3) << 4);
opl3sa2_write(hw_config->io_base, OPL3SA2_SYS_CTRL, sys_ctrl);
}
else {
- printk(KERN_ERR "opl3sa2: not setting ymode, it must be one of 0,1,2,3\n");
+ printk(KERN_ERR PFX "not setting ymode, it must be one of 0,1,2,3\n");
}
}
@@ -820,7 +823,7 @@
opl3sa2_write(hw_config->io_base, OPL3SA2_MISC, misc);
}
else {
- printk(KERN_ERR "opl3sa2: not setting loopback, it must be either 0 or 1\n");
+ printk(KERN_ERR PFX "not setting loopback, it must be either 0 or 1\n");
}
}
@@ -831,50 +834,54 @@
release_region(hw_config->io_base, 2);
/* Unload mixer */
- if(opl3sa2_mixer[card] >= 0)
- sound_unload_mixerdev(opl3sa2_mixer[card]);
+ if(opl3sa2_state[card].mixer >= 0)
+ sound_unload_mixerdev(opl3sa2_state[card].mixer);
}
#ifdef CONFIG_PNP
-struct pnp_id pnp_opl3sa2_list[] = {
+struct pnp_device_id pnp_opl3sa2_list[] = {
{.id = "YMH0021", .driver_data = 0},
{.id = ""}
};
MODULE_DEVICE_TABLE(pnp, pnp_opl3sa2_list);
-static int opl3sa2_pnp_probe(struct pnp_dev *dev, const struct pnp_id *dev_id)
+static int opl3sa2_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
{
int card = opl3sa2_cards_num;
+
+ /* we don't actually want to return an error as the user may have specified
+ no multiple card search
+ */
if (opl3sa2_cards_num == OPL3SA2_CARDS_MAX)
return 0;
opl3sa2_activated[card] = 1;
/* Our own config: */
- cfg[card].io_base = dev->resource[4].start;
- cfg[card].irq = dev->irq_resource[0].start;
- cfg[card].dma = dev->dma_resource[0].start;
- cfg[card].dma2 = dev->dma_resource[1].start;
+ opl3sa2_state[card].cfg.io_base = dev->resource[4].start;
+ opl3sa2_state[card].cfg.irq = dev->irq_resource[0].start;
+ opl3sa2_state[card].cfg.dma = dev->dma_resource[0].start;
+ opl3sa2_state[card].cfg.dma2 = dev->dma_resource[1].start;
/* The MSS config: */
- cfg_mss[card].io_base = dev->resource[1].start;
- cfg_mss[card].irq = dev->irq_resource[0].start;
- cfg_mss[card].dma = dev->dma_resource[0].start;
- cfg_mss[card].dma2 = dev->dma_resource[1].start;
- cfg_mss[card].card_subtype = 1; /* No IRQ or DMA setup */
-
- cfg_mpu[card].io_base = dev->resource[3].start;
- cfg_mpu[card].irq = dev->irq_resource[0].start;
- cfg_mpu[card].dma = -1;
- cfg_mpu[card].dma2 = -1;
- cfg_mpu[card].always_detect = 1; /* It's there, so use shared IRQs */
+ opl3sa2_state[card].cfg_mss.io_base = dev->resource[1].start;
+ opl3sa2_state[card].cfg_mss.irq = dev->irq_resource[0].start;
+ opl3sa2_state[card].cfg_mss.dma = dev->dma_resource[0].start;
+ opl3sa2_state[card].cfg_mss.dma2 = dev->dma_resource[1].start;
+ opl3sa2_state[card].cfg_mss.card_subtype = 1; /* No IRQ or DMA setup */
+
+ opl3sa2_state[card].cfg_mpu.io_base = dev->resource[3].start;
+ opl3sa2_state[card].cfg_mpu.irq = dev->irq_resource[0].start;
+ opl3sa2_state[card].cfg_mpu.dma = -1;
+ opl3sa2_state[card].cfg_mpu.dma2 = -1;
+ opl3sa2_state[card].cfg_mpu.always_detect = 1; /* It's there, so use shared IRQs */
/* Call me paranoid: */
- opl3sa2_clear_slots(&cfg[card]);
- opl3sa2_clear_slots(&cfg_mss[card]);
- opl3sa2_clear_slots(&cfg_mpu[card]);
+ opl3sa2_clear_slots(&opl3sa2_state[card].cfg);
+ opl3sa2_clear_slots(&opl3sa2_state[card].cfg_mss);
+ opl3sa2_clear_slots(&opl3sa2_state[card].cfg_mpu);
- opl3sa2_dev[card] = dev;
+ opl3sa2_state[card].pdev = dev;
opl3sa2_cards_num++;
return 0;
@@ -890,19 +897,20 @@
/* End of component functions */
+#ifdef CONFIG_PM
/* Power Management support functions */
-static int opl3sa2_suspend(struct pm_dev *pdev, unsigned char pm_mode)
+static int opl3sa2_suspend(struct pm_dev *pdev, unsigned int pm_mode)
{
unsigned long flags;
- opl3sa2_mixerdata *p;
+ opl3sa2_state_t *p;
if (!pdev)
return -EINVAL;
- spin_lock_irqsave(&lock,flags);
+ spin_lock_irqsave(&opl3sa2_lock,flags);
+
+ p = (opl3sa2_state_t *) pdev->data;
- p = (opl3sa2_mixerdata *) pdev->data;
- p->in_suspend = 1;
switch (pm_mode) {
case 1:
pm_mode = OPL3SA2_PM_MODE1;
@@ -914,35 +922,38 @@
pm_mode = OPL3SA2_PM_MODE3;
break;
default:
- pm_mode = OPL3SA2_PM_MODE3;
- break;
+ /* we don't know howto handle this... */
+ spin_unlock_irqrestore(&opl3sa2_lock, flags);
+ return -EBUSY;
}
+ p->in_suspend = 1;
/* its supposed to automute before suspending, so we wont bother */
- opl3sa2_read(p->cfg_port, OPL3SA2_PM, &p->reg);
- opl3sa2_write(p->cfg_port, OPL3SA2_PM, p->reg | pm_mode);
+ opl3sa2_write(p->cfg_port, OPL3SA2_PM, pm_mode);
+ /* wait a while for the clock oscillator to stabilise */
+ mdelay(10);
- spin_unlock_irqrestore(&lock,flags);
+ spin_unlock_irqrestore(&opl3sa2_lock,flags);
return 0;
}
static int opl3sa2_resume(struct pm_dev *pdev)
{
unsigned long flags;
- opl3sa2_mixerdata *p;
+ opl3sa2_state_t *p;
if (!pdev)
return -EINVAL;
- p = (opl3sa2_mixerdata *) pdev->data;
- spin_lock_irqsave(&lock,flags);
+ p = (opl3sa2_state_t *) pdev->data;
+ spin_lock_irqsave(&opl3sa2_lock,flags);
/* I don't think this is necessary */
- opl3sa2_write(p->cfg_port, OPL3SA2_PM, p->reg);
- opl3sa2_mixer_restore(p, p->card);
+ opl3sa2_write(p->cfg_port, OPL3SA2_PM, OPL3SA2_PM_MODE0);
+ opl3sa2_mixer_restore(p);
p->in_suspend = 0;
- spin_unlock_irqrestore(&lock,flags);
+ spin_unlock_irqrestore(&opl3sa2_lock,flags);
return 0;
}
@@ -959,6 +970,7 @@
}
return 0;
}
+#endif
/*
* Install OPL3-SA2 based card(s).
@@ -967,8 +979,7 @@
*/
static int __init init_opl3sa2(void)
{
- int card;
- int max;
+ int card, max;
/* Sanitize isapnp and multiple settings */
isapnp = isapnp != 0 ? 1 : 0;
@@ -993,51 +1004,55 @@
if(!isapnp) {
if(io == -1 || irq == -1 || dma == -1 ||
dma2 == -1 || mss_io == -1) {
- printk(KERN_ERR
- "opl3sa2: io, mss_io, irq, dma, and dma2 must be set\n");
+ printk(KERN_ERR PFX
+ "io, mss_io, irq, dma, and dma2 must be set\n");
return -EINVAL;
- opl3sa2_cards_num++;
}
-
+
+ opl3sa2_cards_num++;
/*
* Our own config:
* (NOTE: IRQ and DMA aren't used, so they're set to
* give pretty output from conf_printf. :)
*/
- cfg[card].io_base = io;
- cfg[card].irq = irq;
- cfg[card].dma = dma;
- cfg[card].dma2 = dma2;
+ opl3sa2_state[card].cfg.io_base = io;
+ opl3sa2_state[card].cfg.irq = irq;
+ opl3sa2_state[card].cfg.dma = dma;
+ opl3sa2_state[card].cfg.dma2 = dma2;
/* The MSS config: */
- cfg_mss[card].io_base = mss_io;
- cfg_mss[card].irq = irq;
- cfg_mss[card].dma = dma;
- cfg_mss[card].dma2 = dma2;
- cfg_mss[card].card_subtype = 1; /* No IRQ or DMA setup */
-
- cfg_mpu[card].io_base = mpu_io;
- cfg_mpu[card].irq = irq;
- cfg_mpu[card].dma = -1;
- cfg_mpu[card].always_detect = 1; /* Use shared IRQs */
+ opl3sa2_state[card].cfg_mss.io_base = mss_io;
+ opl3sa2_state[card].cfg_mss.irq = irq;
+ opl3sa2_state[card].cfg_mss.dma = dma;
+ opl3sa2_state[card].cfg_mss.dma2 = dma2;
+ opl3sa2_state[card].cfg_mss.card_subtype = 1; /* No IRQ or DMA setup */
+
+ opl3sa2_state[card].cfg_mpu.io_base = mpu_io;
+ opl3sa2_state[card].cfg_mpu.irq = irq;
+ opl3sa2_state[card].cfg_mpu.dma = -1;
+ opl3sa2_state[card].cfg_mpu.always_detect = 1; /* Use shared IRQs */
/* Call me paranoid: */
- opl3sa2_clear_slots(&cfg[card]);
- opl3sa2_clear_slots(&cfg_mss[card]);
- opl3sa2_clear_slots(&cfg_mpu[card]);
+ opl3sa2_clear_slots(&opl3sa2_state[card].cfg);
+ opl3sa2_clear_slots(&opl3sa2_state[card].cfg_mss);
+ opl3sa2_clear_slots(&opl3sa2_state[card].cfg_mpu);
}
+
+ if (probe_opl3sa2(&opl3sa2_state[card].cfg, card))
+ return -ENODEV;
- if(!probe_opl3sa2(&cfg[card], card) ||
- !probe_opl3sa2_mss(&cfg_mss[card])) {
+ if(!probe_opl3sa2_mss(&opl3sa2_state[card].cfg_mss)) {
/*
* If one or more cards are already registered, don't
* return an error but print a warning. Note, this
* should never really happen unless the hardware or
* ISA PnP screwed up.
*/
+ release_region(opl3sa2_state[card].cfg.io_base, 2);
+
if(opl3sa2_cards_num) {
printk(KERN_WARNING
- "opl3sa2: There was a problem probing one "
+ PFX "There was a problem probing one "
" of the ISA PNP cards, continuing\n");
opl3sa2_cards_num--;
continue;
@@ -1045,47 +1060,54 @@
return -ENODEV;
}
- attach_opl3sa2(&cfg[card], card);
- conf_printf(chipset_name[card], &cfg[card]);
- attach_opl3sa2_mss(&cfg_mss[card]);
- attach_opl3sa2_mixer(&cfg[card], card);
+ attach_opl3sa2(&opl3sa2_state[card].cfg, card);
+ conf_printf(opl3sa2_state[card].chipset_name, &opl3sa2_state[card].cfg);
+ attach_opl3sa2_mixer(&opl3sa2_state[card].cfg, card);
+ attach_opl3sa2_mss(&opl3sa2_state[card].cfg_mss);
+
+ /* ewww =) */
+ opl3sa2_state[card].card = card;
- opl3sa2_data[card].card = card;
+#ifdef CONFIG_PM
/* register our power management capabilities */
- opl3sa2_data[card].pmdev = pm_register(PM_ISA_DEV, card, opl3sa2_pm_callback);
- if (opl3sa2_data[card].pmdev)
- opl3sa2_data[card].pmdev->data = &opl3sa2_data[card];
+ opl3sa2_state[card].pmdev = pm_register(PM_ISA_DEV, card, opl3sa2_pm_callback);
+ if (opl3sa2_state[card].pmdev)
+ opl3sa2_state[card].pmdev->data = &opl3sa2_state[card];
+#endif
/*
* Set the Yamaha 3D enhancement mode (aka Ymersion) if asked to and
* it's supported.
*/
if(ymode != -1) {
- if(chipset[card] == CHIPSET_OPL3SA2) {
+ if(opl3sa2_state[card].chipset == CHIPSET_OPL3SA2) {
printk(KERN_ERR
- "opl3sa2: ymode not supported on OPL3-SA2\n");
+ PFX "ymode not supported on OPL3-SA2\n");
}
else {
- opl3sa2_set_ymode(&cfg[card], ymode);
+ opl3sa2_set_ymode(&opl3sa2_state[card].cfg, ymode);
}
}
/* Set A/D input to Mono loopback if asked to. */
if(loopback != -1) {
- opl3sa2_set_loopback(&cfg[card], loopback);
+ opl3sa2_set_loopback(&opl3sa2_state[card].cfg, loopback);
}
- /* Attach MPU if we've been asked to do so */
- if(cfg_mpu[card].io_base != -1) {
- if(probe_opl3sa2_mpu(&cfg_mpu[card])) {
- attach_opl3sa2_mpu(&cfg_mpu[card]);
+ /* Attach MPU if we've been asked to do so, failure isn't fatal */
+ if(opl3sa2_state[card].cfg_mpu.io_base != -1) {
+ if(probe_opl3sa2_mpu(&opl3sa2_state[card].cfg_mpu)) {
+ if (attach_opl3sa2_mpu(&opl3sa2_state[card].cfg_mpu)) {
+ printk(KERN_ERR PFX "failed to attach MPU401\n");
+ opl3sa2_state[card].cfg_mpu.slots[1] = -1;
+ }
}
}
}
if(isapnp) {
- printk(KERN_NOTICE "opl3sa2: %d PnP card(s) found.\n", opl3sa2_cards_num);
+ printk(KERN_NOTICE PFX "%d PnP card(s) found.\n", opl3sa2_cards_num);
}
return 0;
@@ -1100,14 +1122,14 @@
int card;
for(card = 0; card < opl3sa2_cards_num; card++) {
- if (opl3sa2_data[card].pmdev)
- pm_unregister(opl3sa2_data[card].pmdev);
+ if (opl3sa2_state[card].pmdev)
+ pm_unregister(opl3sa2_state[card].pmdev);
- if(cfg_mpu[card].slots[1] != -1) {
- unload_opl3sa2_mpu(&cfg_mpu[card]);
+ if(opl3sa2_state[card].cfg_mpu.slots[1] != -1) {
+ unload_opl3sa2_mpu(&opl3sa2_state[card].cfg_mpu);
}
- unload_opl3sa2_mss(&cfg_mss[card]);
- unload_opl3sa2(&cfg[card], card);
+ unload_opl3sa2_mss(&opl3sa2_state[card].cfg_mss);
+ unload_opl3sa2(&opl3sa2_state[card].cfg, card);
#ifdef CONFIG_PNP
pnp_unregister_driver(&opl3sa2_driver);
--
function.linuxpower.ca