Hi,
I was just wondering about the bugfix for UP IO-APIC that is in 2.4-ac
and that went into 2.5:
http://linux.bkbits.net:8080/linux-2.5/[email protected]
Will it make it into 2.4.22? From what I understand this fixes the
following problem that many of us are seeing:
hda: dma_timer_expiry: dma status == 0x24
hda: lost interrupt
hda: dma_intr: bad DMA status (dma_stat=30)
hda: dma_intr: status=0x50 { DriveReady SeekComplete }
this is on a Via chipset ATA133 capable board with 2 ATA133 Western
Digital drives in a raid1 configuration. kernel is 2.4.21 patched ACPI
and UP-APIC enabled.
lspci -v output:
00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 3189 (rev 80)
Subsystem: Giga-byte Technology: Unknown device 5000
Flags: bus master, 66Mhz, medium devsel, latency 176
Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [80] AGP version 3.5
Capabilities: [c0] Power Management version 2
00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device b198 (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Capabilities: [80] Power Management version 2
00:09.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 08)
Subsystem: Creative Labs CT4832 SBLive! Value
Flags: bus master, medium devsel, latency 248, IRQ 17
I/O ports at d000 [size=32]
Capabilities: [dc] Power Management version 1
00:09.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 08)
Subsystem: Creative Labs Gameport Joystick
Flags: bus master, medium devsel, latency 176
I/O ports at d400 [size=8]
Capabilities: [dc] Power Management version 1
00:0b.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+] (rev 54) (prog-if 00 [VGA])
Flags: medium devsel, IRQ 19
Memory at e8000000 (32-bit, non-prefetchable) [size=64M]
Expansion ROM at <unassigned> [disabled] [size=64K]
00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology: Unknown device 5004
Flags: bus master, medium devsel, latency 176, IRQ 7
I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology: Unknown device 5004
Flags: bus master, medium devsel, latency 176, IRQ 12
I/O ports at dc00 [size=32]
Capabilities: [80] Power Management version 2
00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology: Unknown device 5004
Flags: bus master, medium devsel, latency 176, IRQ 11
I/O ports at e000 [size=32]
Capabilities: [80] Power Management version 2
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge
Subsystem: Giga-byte Technology: Unknown device 5001
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: Giga-byte Technology: Unknown device 5002
Flags: bus master, medium devsel, latency 176, IRQ 255
I/O ports at e400 [size=16]
Capabilities: [c0] Power Management version 2
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio Controller (rev 50)
Subsystem: Giga-byte Technology: Unknown device a002
Flags: medium devsel, IRQ 11
I/O ports at e800 [size=256]
Capabilities: [c0] Power Management version 2
00:13.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Flags: bus master, medium devsel, latency 176, IRQ 18
I/O ports at ec00 [size=256]
Memory at ed001000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
thanks.
-m
On Thursday 31 July 2003 02:28, Marc Heckmann wrote:
Hi Marc,
> I was just wondering about the bugfix for UP IO-APIC that is in 2.4-ac
> and that went into 2.5:
> http://linux.bkbits.net:8080/linux-2.5/[email protected]
> Will it make it into 2.4.22? From what I understand this fixes the
> following problem that many of us are seeing:
> hda: dma_timer_expiry: dma status == 0x24
> hda: lost interrupt
> hda: dma_intr: bad DMA status (dma_stat=30)
> hda: dma_intr: status=0x50 { DriveReady SeekComplete }
I sent it to Marcelo yesterday. In the meantime you might want to try out the
attached patch ontop of 2.4.22-pre9 and see if it fixes the problems for you.
ciao, Marc
hi,
On Thu, Jul 31, 2003 at 12:26:58PM -0300, Marcelo Tosatti wrote:
>
> Marc,
>
> I just applied that patch in the 2.4 BK tree.
>
> -pre10 will be release today with it included.
>
ok, I'll give it a spin and let you know.
Cheers,
-m
> On Thu, 31 Jul 2003, Marc-Christian Petersen wrote:
>
> > On Thursday 31 July 2003 02:28, Marc Heckmann wrote:
> >
> > Hi Marc,
> >
> > > I was just wondering about the bugfix for UP IO-APIC that is in 2.4-ac
> > > and that went into 2.5:
> > > http://linux.bkbits.net:8080/linux-2.5/[email protected]
> > > Will it make it into 2.4.22? From what I understand this fixes the
> > > following problem that many of us are seeing:
> > > hda: dma_timer_expiry: dma status == 0x24
> > > hda: lost interrupt
> > > hda: dma_intr: bad DMA status (dma_stat=30)
> > > hda: dma_intr: status=0x50 { DriveReady SeekComplete }
> >
> > I sent it to Marcelo yesterday. In the meantime you might want to try out the
> > attached patch ontop of 2.4.22-pre9 and see if it fixes the problems for you.
> >
> > ciao, Marc
> >
Marc,
I just applied that patch in the 2.4 BK tree.
-pre10 will be release today with it included.
On Thu, 31 Jul 2003, Marc-Christian Petersen wrote:
> On Thursday 31 July 2003 02:28, Marc Heckmann wrote:
>
> Hi Marc,
>
> > I was just wondering about the bugfix for UP IO-APIC that is in 2.4-ac
> > and that went into 2.5:
> > http://linux.bkbits.net:8080/linux-2.5/[email protected]
> > Will it make it into 2.4.22? From what I understand this fixes the
> > following problem that many of us are seeing:
> > hda: dma_timer_expiry: dma status == 0x24
> > hda: lost interrupt
> > hda: dma_intr: bad DMA status (dma_stat=30)
> > hda: dma_intr: status=0x50 { DriveReady SeekComplete }
>
> I sent it to Marcelo yesterday. In the meantime you might want to try out the
> attached patch ontop of 2.4.22-pre9 and see if it fixes the problems for you.
>
> ciao, Marc
>
On Thursday 31 July 2003 17:26, Marcelo Tosatti wrote:
Hi Marcelo,
> I just applied that patch in the 2.4 BK tree.
> -pre10 will be release today with it included.
perfect :) ... Thank you.
ciao, Marc
hi,
the patch solves the bug for me.
-m
On Thu, Jul 31, 2003 at 12:26:58PM -0300, Marcelo Tosatti wrote:
>
> Marc,
>
> I just applied that patch in the 2.4 BK tree.
>
> -pre10 will be release today with it included.
>
> On Thu, 31 Jul 2003, Marc-Christian Petersen wrote:
>
> > On Thursday 31 July 2003 02:28, Marc Heckmann wrote:
> >
> > Hi Marc,
> >
> > > I was just wondering about the bugfix for UP IO-APIC that is in 2.4-ac
> > > and that went into 2.5:
> > > http://linux.bkbits.net:8080/linux-2.5/[email protected]
> > > Will it make it into 2.4.22? From what I understand this fixes the
> > > following problem that many of us are seeing:
> > > hda: dma_timer_expiry: dma status == 0x24
> > > hda: lost interrupt
> > > hda: dma_intr: bad DMA status (dma_stat=30)
> > > hda: dma_intr: status=0x50 { DriveReady SeekComplete }
> >
> > I sent it to Marcelo yesterday. In the meantime you might want to try out the
> > attached patch ontop of 2.4.22-pre9 and see if it fixes the problems for you.
> >
> > ciao, Marc
> >