Hi,
I have 3 problems with USB with kernel 2.6.6-rc3-bk1. All problems do not
exist with earlier kernels.
1. modem_run for speedtouch stoped working somewhere between 2.6.6-rc2-bk3
and 2.6.6-rc3-bk1. Here is the log:
Apr 30 01:05:54 polb01 modem_run[9588]: [monitoring report] ADSL link went
up
Apr 30 01:06:11 polb01 modem_run[7828]: ADSL synchronization has been
obtained
Apr 30 01:06:11 polb01 modem_run[7828]: ADSL line is up (640 kbit/s down |
160 kbit/s up)
Apr 30 01:06:11 polb01 modem_run[9588]: Error reading interrupts
Apr 30 01:06:11 polb01 modem_run[9588]: [monitoring report] ADSL link went
down
Apr 30 01:06:12 polb01 modem_run[9588]: Device disconnected, shutting down
This does not prevent ppp from connecting.
2. When I terminate the ppp connection and remove speedtouch and ppp
modules and manually disconect speedtouch modem from my system I get:
Apr 30 01:15:32 polb01 usb 1-1: USB disconnect, address 2
Apr 30 01:15:32 polb01 drivers/usb/core/devio.c:290: spin_is_locked on
uninitialized spinlock de35199c.
Apr 30 01:15:32 polb01 Unable to handle kernel paging request at virtual
address 000149ac
Apr 30 01:15:32 polb01 printing eip:
Apr 30 01:15:32 polb01 c02ea517
Apr 30 01:15:32 polb01 *pde = 00000000
Apr 30 01:15:32 polb01 Oops: 0000 [#1]
Apr 30 01:15:32 polb01 PREEMPT
Apr 30 01:15:32 polb01 CPU: 0
Apr 30 01:15:32 polb01 EIP: 0060:[<c02ea517>] Not tainted
Apr 30 01:15:32 polb01 EFLAGS: 00010097 (2.6.6-rc3-bk1)
Apr 30 01:15:32 polb01 EIP is at vsnprintf+0x317/0x4a0
Apr 30 01:15:32 polb01 eax: 000149ac ebx: 0000000a ecx: 000149ac
edx: fffffffe
Apr 30 01:15:32 polb01 esi: c0475beb edi: 00000000 ebp: c0475f9f
esp: dfa79dc0
Apr 30 01:15:32 polb01 ds: 007b es: 007b ss: 0068
Apr 30 01:15:32 polb01 Process khubd (pid: 5455, threadinfo=dfa78000
task=dfa181f0)
Apr 30 01:15:32 polb01 Stack: c0475bcf c0475f9f de35199c 00000000 00000010
00000008 00000007 00000001
Apr 30 01:15:32 polb01 ffffffff ffffffff 00000400 00000046 def8c864
00000286 c02ea6cb c0475ba0
Apr 30 01:15:32 polb01 00000400 e09a7b1f dfa79e78 c0475ba0 c01200fe
c0475ba0 00000400 e09a7af4
Apr 30 01:15:32 polb01 Call Trace:
Apr 30 01:15:32 polb01 [<c02ea6cb>] vscnprintf+0x2b/0x40
Apr 30 01:15:32 polb01 [<c01200fe>] printk+0x17e/0x400
Apr 30 01:15:32 polb01 [<e099a6ac>] hcd_endpoint_disable+0x18c/0x4d0
[usbcore]
Apr 30 01:15:32 polb01 [<e09a0522>] destroy_async+0x432/0x440 [usbcore]
Apr 30 01:15:32 polb01 [<e09a071c>] driver_disconnect+0x3c/0x40 [usbcore]
Apr 30 01:15:32 polb01 [<e09940fa>] usb_unbind_interface+0x7a/0x80
[usbcore]
Apr 30 01:15:32 polb01 [<c032bab4>] device_release_driver+0x64/0x70
Apr 30 01:15:32 polb01 [<c032bc23>] bus_remove_device+0x73/0xc0
Apr 30 01:15:32 polb01 [<c032aa8c>] device_del+0x6c/0xb0
Apr 30 01:15:32 polb01 [<c032aae3>] device_unregister+0x13/0x30
Apr 30 01:15:32 polb01 [<e099c6d0>] usb_disable_device+0x70/0xb0 [usbcore]
Apr 30 01:15:32 polb01 [<e0994d3b>] usb_disconnect+0xbb/0x110 [usbcore]
Apr 30 01:15:32 polb01 [<e099788f>] hub_port_connect_change+0x28f/0x2a0
[usbcore]
Apr 30 01:15:32 polb01 [<e0997243>] hub_port_status+0x43/0xb0 [usbcore]
Apr 30 01:15:32 polb01 [<e0997c1b>] hub_events+0x37b/0x500 [usbcore]
Apr 30 01:15:32 polb01 [<e0997dcd>] hub_thread+0x2d/0xf0 [usbcore]
Apr 30 01:15:32 polb01 [<c010490e>] ret_from_fork+0x6/0x14
Apr 30 01:15:32 polb01 [<c0119e80>] default_wake_function+0x0/0x20
Apr 30 01:15:32 polb01 [<e0997da0>] hub_thread+0x0/0xf0 [usbcore]
Apr 30 01:15:32 polb01 [<c0102291>] kernel_thread_helper+0x5/0x14
Apr 30 01:15:32 polb01
Apr 30 01:15:32 polb01 Code: 80 38 00 74 07 40 4a 83 fa ff 75 f4 29 c8 83
e7 10 89 c3 75
Apr 30 01:15:32 polb01 <6>note: khubd[5455] exited with preempt_count 2
This problem happens with and without preemption. Same problem I reported
with 2.6.6-rc2-bk3 kernel. But for example with 2.6.2 it works fine.
3. When I shutdown my system I get:
Apr 30 01:12:44 polb01 drivers/usb/core/devio.c:290: spin_is_locked on
uninitialized spinlock de4ad99c.
Apr 30 01:12:44 polb01 Unable to handle kernel NULL pointer dereference at
virtual address 0000009a
Apr 30 01:12:44 polb01 printing eip:
Apr 30 01:12:44 polb01 e09a0177
Apr 30 01:12:44 polb01 *pde = 00000000
Apr 30 01:12:44 polb01 Oops: 0000 [#1]
Apr 30 01:12:44 polb01 PREEMPT
Apr 30 01:12:44 polb01 CPU: 0
Apr 30 01:12:44 polb01 EIP: 0060:[<e09a0177>] Not tainted
Apr 30 01:12:44 polb01 EFLAGS: 00010086 (2.6.6-rc3-bk1)
Apr 30 01:12:44 polb01 EIP is at destroy_async+0x87/0x440 [usbcore]
Apr 30 01:12:44 polb01 eax: de4ad99c ebx: 00000096 ecx: c0474de4
edx: c0406e98
Apr 30 01:12:44 polb01 esi: de4ad968 edi: dfbec000 ebp: 00000292
esp: dfbeddbc
Apr 30 01:12:44 polb01 ds: 007b es: 007b ss: 0068
Apr 30 01:12:44 polb01 Process rmmod (pid: 13440, threadinfo=dfbec000
task=dfa4c720)
Apr 30 01:12:44 polb01 Stack: e09a7a94 e09a6694 00000122 de4ad99c 00000001
dfa4e000 e099c5f4 dfa4e000
Apr 30 01:12:44 polb01 00000081 de4ad99c de307854 e09b2080 de307864
dfa4e024 e09a071c de4ad968
Apr 30 01:12:44 polb01 de4ad9b4 e09940fa de307854 de307854 de307864
de307864 e09b20a0 c032bab4
Apr 30 01:12:44 polb01 Call Trace:
Apr 30 01:12:44 polb01 [<e099c5f4>] usb_disable_endpoint+0x74/0x80
[usbcore]
Apr 30 01:12:44 polb01 [<e09a071c>] driver_disconnect+0x3c/0x40 [usbcore]
Apr 30 01:12:44 polb01 [<e09940fa>] usb_unbind_interface+0x7a/0x80
[usbcore]
Apr 30 01:12:44 polb01 [<c032bab4>] device_release_driver+0x64/0x70
Apr 30 01:12:44 polb01 [<c032bc23>] bus_remove_device+0x73/0xc0
Apr 30 01:12:44 polb01 [<c032aa8c>] device_del+0x6c/0xb0
Apr 30 01:12:44 polb01 [<c032aae3>] device_unregister+0x13/0x30
Apr 30 01:12:44 polb01 [<e099c6d0>] usb_disable_device+0x70/0xb0 [usbcore]
Apr 30 01:12:44 polb01 [<e0994d3b>] usb_disconnect+0xbb/0x110 [usbcore]
Apr 30 01:12:44 polb01 [<e0994d7e>] usb_disconnect+0xfe/0x110 [usbcore]
Apr 30 01:12:44 polb01 [<e099f730>] usb_hcd_pci_remove+0x80/0x180
[usbcore]
Apr 30 01:12:44 polb01 [<c02f080b>] pci_device_remove+0x3b/0x40
Apr 30 01:12:44 polb01 [<c032bab4>] device_release_driver+0x64/0x70
Apr 30 01:12:44 polb01 [<c032bae0>] driver_detach+0x20/0x30
Apr 30 01:12:44 polb01 [<c032bd8b>] bus_remove_driver+0x5b/0xa0
Apr 30 01:12:44 polb01 [<c032c21a>] driver_unregister+0x1a/0x46
Apr 30 01:12:44 polb01 [<c014084d>] __try_stop_module+0x2d/0x53
Apr 30 01:12:44 polb01 [<c02f0a06>] pci_unregister_driver+0x16/0x30
Apr 30 01:12:44 polb01 [<e0ae488f>] uhci_hcd_cleanup+0xf/0x61 [uhci_hcd]
Apr 30 01:12:44 polb01 [<c013dab0>] sys_delete_module+0x140/0x1b0
Apr 30 01:12:44 polb01 [<c01049e5>] sysenter_past_esp+0x52/0x71
Apr 30 01:12:44 polb01
Apr 30 01:12:44 polb01 Code: 8b 53 04 8b 03 89 50 04 89 02 89 5b 04 89 1b
81 7e 34 3c 4b
Apr 30 01:12:44 polb01 <6>note: rmmod[13440] exited with preempt_count 1
Apr 30 01:12:44 polb01 Debug: sleeping function called from invalid
context at include/linux/rwsem.h:43
Apr 30 01:12:44 polb01 in_atomic():1, irqs_disabled():0
Apr 30 01:12:44 polb01 Call Trace:
Apr 30 01:12:44 polb01 [<c011b637>] __might_sleep+0xb7/0xe0
Apr 30 01:12:44 polb01 [<c0122ff9>] do_exit+0xb9/0x980
Apr 30 01:12:44 polb01 [<c0117080>] do_page_fault+0x0/0x52f
Apr 30 01:12:44 polb01 [<c010543f>] die+0x23f/0x240
Apr 30 01:12:44 polb01 [<c011725e>] do_page_fault+0x1de/0x52f
Apr 30 01:12:44 polb01 [<c0119eda>] __wake_up_common+0x3a/0x60
Apr 30 01:12:44 polb01 [<c02ea6cb>] vscnprintf+0x2b/0x40
Apr 30 01:12:44 polb01 [<c0117080>] do_page_fault+0x0/0x52f
Apr 30 01:12:44 polb01 [<c0104c41>] error_code+0x2d/0x38
Apr 30 01:12:44 polb01 [<e09a0177>] destroy_async+0x87/0x440 [usbcore]
Apr 30 01:12:44 polb01 [<e099c5f4>] usb_disable_endpoint+0x74/0x80
[usbcore]
Apr 30 01:12:44 polb01 [<e09a071c>] driver_disconnect+0x3c/0x40 [usbcore]
Apr 30 01:12:44 polb01 [<e09940fa>] usb_unbind_interface+0x7a/0x80
[usbcore]
Apr 30 01:12:44 polb01 [<c032bab4>] device_release_driver+0x64/0x70
Apr 30 01:12:44 polb01 [<c032bc23>] bus_remove_device+0x73/0xc0
Apr 30 01:12:44 polb01 [<c032aa8c>] device_del+0x6c/0xb0
Apr 30 01:12:44 polb01 [<c032aae3>] device_unregister+0x13/0x30
Apr 30 01:12:44 polb01 [<e099c6d0>] usb_disable_device+0x70/0xb0 [usbcore]
Apr 30 01:12:44 polb01 [<e0994d3b>] usb_disconnect+0xbb/0x110 [usbcore]
Apr 30 01:12:44 polb01 [<e0994d7e>] usb_disconnect+0xfe/0x110 [usbcore]
Apr 30 01:12:44 polb01 [<e099f730>] usb_hcd_pci_remove+0x80/0x180
[usbcore]
Apr 30 01:12:44 polb01 [<c02f080b>] pci_device_remove+0x3b/0x40
Apr 30 01:12:44 polb01 [<c032bab4>] device_release_driver+0x64/0x70
Apr 30 01:12:44 polb01 [<c032bae0>] driver_detach+0x20/0x30
Apr 30 01:12:44 polb01 [<c032bd8b>] bus_remove_driver+0x5b/0xa0
Apr 30 01:12:44 polb01 [<c032c21a>] driver_unregister+0x1a/0x46
Apr 30 01:12:44 polb01 [<c014084d>] __try_stop_module+0x2d/0x53
Apr 30 01:12:44 polb01 [<c02f0a06>] pci_unregister_driver+0x16/0x30
Apr 30 01:12:44 polb01 [<e0ae488f>] uhci_hcd_cleanup+0xf/0x61 [uhci_hcd]
Apr 30 01:12:44 polb01 [<c013dab0>] sys_delete_module+0x140/0x1b0
Apr 30 01:12:44 polb01 [<c01049e5>] sysenter_past_esp+0x52/0x71
Apr 30 01:12:44 polb01
Apr 30 01:12:44 polb01 bad: scheduling while atomic!
Apr 30 01:12:44 polb01 Call Trace:
Apr 30 01:12:44 polb01 [<c03bc508>] schedule+0x8c8/0x8d0
Apr 30 01:12:44 polb01 [<c015634b>] unmap_page_range+0x4b/0x80
Apr 30 01:12:44 polb01 [<c0156548>] unmap_vmas+0x1c8/0x2c0
Apr 30 01:12:44 polb01 [<c015c455>] exit_mmap+0xd5/0x2c0
Apr 30 01:12:44 polb01 [<c011c4a4>] mmput+0xb4/0x120
Apr 30 01:12:44 polb01 [<c0123119>] do_exit+0x1d9/0x980
Apr 30 01:12:44 polb01 [<c0117080>] do_page_fault+0x0/0x52f
Apr 30 01:12:44 polb01 [<c010543f>] die+0x23f/0x240
Apr 30 01:12:44 polb01 [<c011725e>] do_page_fault+0x1de/0x52f
Apr 30 01:12:44 polb01 [<c0119eda>] __wake_up_common+0x3a/0x60
Apr 30 01:12:44 polb01 [<c02ea6cb>] vscnprintf+0x2b/0x40
Apr 30 01:12:44 polb01 [<c0117080>] do_page_fault+0x0/0x52f
Apr 30 01:12:44 polb01 [<c0104c41>] error_code+0x2d/0x38
Apr 30 01:12:44 polb01 [<e09a0177>] destroy_async+0x87/0x440 [usbcore]
Apr 30 01:12:44 polb01 [<e099c5f4>] usb_disable_endpoint+0x74/0x80
[usbcore]
Apr 30 01:12:44 polb01 [<e09a071c>] driver_disconnect+0x3c/0x40 [usbcore]
Apr 30 01:12:44 polb01 [<e09940fa>] usb_unbind_interface+0x7a/0x80
[usbcore]
Apr 30 01:12:44 polb01 [<c032bab4>] device_release_driver+0x64/0x70
Apr 30 01:12:44 polb01 [<c032bc23>] bus_remove_device+0x73/0xc0
Apr 30 01:12:44 polb01 [<c032aa8c>] device_del+0x6c/0xb0
Apr 30 01:12:44 polb01 [<c032aae3>] device_unregister+0x13/0x30
Apr 30 01:12:44 polb01 [<e099c6d0>] usb_disable_device+0x70/0xb0 [usbcore]
Apr 30 01:12:44 polb01 [<e0994d3b>] usb_disconnect+0xbb/0x110 [usbcore]
Apr 30 01:12:44 polb01 [<e0994d7e>] usb_disconnect+0xfe/0x110 [usbcore]
Apr 30 01:12:44 polb01 [<e099f730>] usb_hcd_pci_remove+0x80/0x180
[usbcore]
Apr 30 01:12:44 polb01 [<c02f080b>] pci_device_remove+0x3b/0x40
Apr 30 01:12:44 polb01 [<c032bab4>] device_release_driver+0x64/0x70
Apr 30 01:12:44 polb01 [<c032bae0>] driver_detach+0x20/0x30
Apr 30 01:12:44 polb01 [<c032bd8b>] bus_remove_driver+0x5b/0xa0
Apr 30 01:12:44 polb01 [<c032c21a>] driver_unregister+0x1a/0x46
Apr 30 01:12:44 polb01 [<c014084d>] __try_stop_module+0x2d/0x53
Apr 30 01:12:44 polb01 [<c02f0a06>] pci_unregister_driver+0x16/0x30
Apr 30 01:12:44 polb01 [<e0ae488f>] uhci_hcd_cleanup+0xf/0x61 [uhci_hcd]
Apr 30 01:12:44 polb01 [<c013dab0>] sys_delete_module+0x140/0x1b0
Apr 30 01:12:44 polb01 [<c01049e5>] sysenter_past_esp+0x52/0x71
This does not work with 2.6.6-rc2-bk3 too.
Some details about my system:
Linux version 2.6.6-rc3-bk1 (root@polb01) (gcc version 3.3.3 20040412
(Gentoo Linux 3.3.3-r3, ssp-3.3-7, pie-8.5.3)) #2 Thu Apr 29 17:55:16 CEST
2004
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 4
model name : AMD Athlon(tm) processor
stepping : 2
cpu MHz : 1001.690
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 1982.46
MemTotal: 515972 kB
MemFree: 456432 kB
Buffers: 5608 kB
Cached: 37428 kB
SwapCached: 0 kB
Active: 25688 kB
Inactive: 20152 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 515972 kB
LowFree: 456432 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 20 kB
Writeback: 0 kB
Mapped: 8280 kB
Slab: 7892 kB
Committed_AS: 29964 kB
PageTables: 272 kB
VmallocTotal: 516052 kB
VmallocUsed: 3748 kB
VmallocChunk: 512144 kB
HugePages_Total: 0
HugePages_Free: 0
Hugepagesize: 4096 kB
Module Size Used by
bsd_comp 6016 0
snd_bt87x 15556 0
tuner 18252 0
tvaudio 22412 0
bttv 162380 0
video_buf 24132 1 bttv
i2c_algo_bit 9288 1 bttv
v4l2_common 6208 1 bttv
btcx_risc 4744 1 bttv
i2c_core 24324 4 tuner,tvaudio,bttv,i2c_algo_bit
videodev 10112 1 bttv
emu10k1_gp 3648 0
8139too 29504 0
mii 5120 1 8139too
speedtch 20336 1
uhci_hcd 34832 0
parport_pc 23872 0
parport 31296 1 parport_pc
snd_seq_midi 8672 0
snd_emu10k1_synth 9664 0
snd_emux_synth 46464 1 snd_emu10k1_synth
snd_seq_virmidi 7680 1 snd_emux_synth
snd_seq_midi_emul 8064 1 snd_emux_synth
snd_emu10k1 117764 1 snd_emu10k1_synth
snd_rawmidi 30880 3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1
snd_ac97_codec 68612 1 snd_emu10k1
snd_util_mem 4928 2 snd_emux_synth,snd_emu10k1
snd_hwdep 10052 2 snd_emux_synth,snd_emu10k1
snd_seq_oss 41664 0
snd_seq_midi_event 9728 3 snd_seq_midi,snd_seq_virmidi,snd_seq_oss
snd_seq 70288 8
snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_oss,snd_seq_midi_event
snd_seq_device 8776 7
snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_rawmidi,snd_seq_oss,snd_seq
snd_pcm_oss 55844 0
snd_pcm 113928 3 snd_bt87x,snd_emu10k1,snd_pcm_oss
snd_page_alloc 11588 3 snd_bt87x,snd_emu10k1,snd_pcm
snd_timer 35460 2 snd_seq,snd_pcm
snd_mixer_oss 20480 1 snd_pcm_oss
snd 58852 17
snd_bt87x,snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_util_mem,snd_hwdep,snd_seq_oss,snd_seq_midi_event,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 11552 2 bttv,snd
rtc 22108 0
usbcore 125404 4 speedtch,uhci_hcd
ntfs 94348 1
vfat 19008 1
fat 52192 1 vfat
dm_mod 45920 0
msr 3456 0
edd 10456 0
cpuid 3136 0
nvram 14024 0
cryptoloop 3648 0
loop 18056 1 cryptoloop
floppy 65264 0
pcspkr 4256 0
analog 12448 0
gameport 5440 2 emu10k1_gp,analog
thermal 12624 0
processor 12516 1 thermal
evdev 9600 0
fan 4108 0
button 6232 0
ac 4876 0
psmouse 20104 0
pppoatm 6656 1
atm 48468 4 speedtch,pppoatm
ppp_deflate 6144 0
zlib_deflate 22232 1 ppp_deflate
zlib_inflate 22272 1 ppp_deflate
ppp_generic 41684 7 bsd_comp,pppoatm,ppp_deflate
slhc 7872 1 ppp_generic
capability 4228 0
commoncap 7360 1 capability
unix 31028 20
0000:00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P]
System Controller (rev 13)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 176
Region 0: Memory at d8000000 (32-bit, prefetchable)
Region 1: Memory at de019000 (32-bit, prefetchable) [size=4K]
Region 2: I/O ports at d000 [disabled] [size=4]
Capabilities: [a0] AGP version 2.0
Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
0000:00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P]
AGP Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 176
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: dc000000-ddffffff
Prefetchable memory behind bridge: d0000000-d7ffffff
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super
South] (rev 40)
Subsystem: ABIT Computer Corp. KG7-Lite Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
(prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc.
VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 176
Region 4: I/O ports at d400 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 1a) (prog-if
00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 176, cache line size 08
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:07.3 USB Controller: VIA Technologies, Inc. USB (rev 1a) (prog-if
00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 176, cache line size 08
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at dc00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
(rev 40)
Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 11
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 240 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e000
Region 1: Memory at de01a000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:09.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1
(rev 08)
Subsystem: Creative Labs SB Live! 5.1 Model SB0100
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 240 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at e400
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:09.1 Input device controller: Creative Labs SB Live! MIDI/Game
Port (rev 08)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 240
Region 0: I/O ports at e800
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0b.0 Communication controller: 5610 56K FaxModem USR 56k Internal
WinModem
Subsystem: 5610 56K FaxModem: Unknown device 00b2
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at de018000 (32-bit, prefetchable)
Region 1: Memory at de000000 (32-bit, prefetchable) [size=64K]
Region 2: Memory at de010000 (32-bit, prefetchable) [size=32K]
Region 3: I/O ports at ec00 [size=64]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
PME(D0+,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
0000:00:0d.0 Multimedia video controller: Brooktree Corporation Bt878
Video Capture (rev 11)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 240 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at de01b000 (32-bit, prefetchable)
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0d.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 240 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at de01c000 (32-bit, prefetchable)
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:05.0 VGA compatible controller: nVidia Corporation NV15 [GeForce2
GTS/Pro] (rev a4) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 192 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at dc000000 (32-bit, non-prefetchable)
Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 003: ID 0130:0130
Bus 001 Device 002: ID 06b9:4061 Alcatel Telecom Speed Touch ISDN
Bus 001 Device 001: ID 0000:0000
Please fix these bugs because they prevent me from running 2.6.6
normally... If I can help further mail me.
Thanks in advance for your help,
Grzegorz Kulewski
BTW. This is speedtouch ADSL modem NOT ISDN:
> Bus 001 Device 002: ID 06b9:4061 Alcatel Telecom Speed Touch ISDN
Grzegorz Kulewski
Hi Grzegorz,
> 1. modem_run for speedtouch stoped working somewhere between 2.6.6-rc2-bk3
> and 2.6.6-rc3-bk1. Here is the log:
>
> Apr 30 01:05:54 polb01 modem_run[9588]: [monitoring report] ADSL link went
> up
> Apr 30 01:06:11 polb01 modem_run[7828]: ADSL synchronization has been
> obtained
> Apr 30 01:06:11 polb01 modem_run[7828]: ADSL line is up (640 kbit/s down |
> 160 kbit/s up)
> Apr 30 01:06:11 polb01 modem_run[9588]: Error reading interrupts
> Apr 30 01:06:11 polb01 modem_run[9588]: [monitoring report] ADSL link went
> down
> Apr 30 01:06:12 polb01 modem_run[9588]: Device disconnected, shutting down
>
> This does not prevent ppp from connecting.
This one is fixed in Greg's latest USB tree (not pushed to Linus yet).
> 2. When I terminate the ppp connection and remove speedtouch and ppp
> modules and manually disconect speedtouch modem from my system I get:
>
> Apr 30 01:15:32 polb01 usb 1-1: USB disconnect, address 2
> Apr 30 01:15:32 polb01 drivers/usb/core/devio.c:290: spin_is_locked on
> uninitialized spinlock de35199c.
This suggests either memory corruption, or that freed memory is being accessed.
I can't see anything that could cause this at first glance, so could you please do
the following:
(1) get Greg's latest bitkeeper tree (bk://kernel.bkbits.net/gregkh/linux/usb-2.6)
(2) compile it with all the kernel hacking debug options turned on.
> Apr 30 01:15:32 polb01 Unable to handle kernel paging request at virtual
> address 000149ac
> Apr 30 01:15:32 polb01 printing eip:
> Apr 30 01:15:32 polb01 c02ea517
> Apr 30 01:15:32 polb01 *pde = 00000000
> Apr 30 01:15:32 polb01 Oops: 0000 [#1]
> Apr 30 01:15:32 polb01 PREEMPT
> Apr 30 01:15:32 polb01 CPU: 0
> Apr 30 01:15:32 polb01 EIP: 0060:[<c02ea517>] Not tainted
> Apr 30 01:15:32 polb01 EFLAGS: 00010097 (2.6.6-rc3-bk1)
> Apr 30 01:15:32 polb01 EIP is at vsnprintf+0x317/0x4a0
> Apr 30 01:15:32 polb01 eax: 000149ac ebx: 0000000a ecx: 000149ac
> edx: fffffffe
> Apr 30 01:15:32 polb01 esi: c0475beb edi: 00000000 ebp: c0475f9f
> esp: dfa79dc0
> Apr 30 01:15:32 polb01 ds: 007b es: 007b ss: 0068
> Apr 30 01:15:32 polb01 Process khubd (pid: 5455, threadinfo=dfa78000
> task=dfa181f0)
> Apr 30 01:15:32 polb01 Stack: c0475bcf c0475f9f de35199c 00000000 00000010
> 00000008 00000007 00000001
> Apr 30 01:15:32 polb01 ffffffff ffffffff 00000400 00000046 def8c864
> 00000286 c02ea6cb c0475ba0
> Apr 30 01:15:32 polb01 00000400 e09a7b1f dfa79e78 c0475ba0 c01200fe
> c0475ba0 00000400 e09a7af4
> Apr 30 01:15:32 polb01 Call Trace:
> Apr 30 01:15:32 polb01 [<c02ea6cb>] vscnprintf+0x2b/0x40
> Apr 30 01:15:32 polb01 [<c01200fe>] printk+0x17e/0x400
> Apr 30 01:15:32 polb01 [<e099a6ac>] hcd_endpoint_disable+0x18c/0x4d0
> [usbcore]
> Apr 30 01:15:32 polb01 [<e09a0522>] destroy_async+0x432/0x440 [usbcore]
> Apr 30 01:15:32 polb01 [<e09a071c>] driver_disconnect+0x3c/0x40 [usbcore]
> Apr 30 01:15:32 polb01 [<e09940fa>] usb_unbind_interface+0x7a/0x80
> [usbcore]
> Apr 30 01:15:32 polb01 [<c032bab4>] device_release_driver+0x64/0x70
> Apr 30 01:15:32 polb01 [<c032bc23>] bus_remove_device+0x73/0xc0
> Apr 30 01:15:32 polb01 [<c032aa8c>] device_del+0x6c/0xb0
> Apr 30 01:15:32 polb01 [<c032aae3>] device_unregister+0x13/0x30
> Apr 30 01:15:32 polb01 [<e099c6d0>] usb_disable_device+0x70/0xb0 [usbcore]
> Apr 30 01:15:32 polb01 [<e0994d3b>] usb_disconnect+0xbb/0x110 [usbcore]
> Apr 30 01:15:32 polb01 [<e099788f>] hub_port_connect_change+0x28f/0x2a0
> [usbcore]
> Apr 30 01:15:32 polb01 [<e0997243>] hub_port_status+0x43/0xb0 [usbcore]
> Apr 30 01:15:32 polb01 [<e0997c1b>] hub_events+0x37b/0x500 [usbcore]
> Apr 30 01:15:32 polb01 [<e0997dcd>] hub_thread+0x2d/0xf0 [usbcore]
> Apr 30 01:15:32 polb01 [<c010490e>] ret_from_fork+0x6/0x14
> Apr 30 01:15:32 polb01 [<c0119e80>] default_wake_function+0x0/0x20
> Apr 30 01:15:32 polb01 [<e0997da0>] hub_thread+0x0/0xf0 [usbcore]
> Apr 30 01:15:32 polb01 [<c0102291>] kernel_thread_helper+0x5/0x14
> Apr 30 01:15:32 polb01
> Apr 30 01:15:32 polb01 Code: 80 38 00 74 07 40 4a 83 fa ff 75 f4 29 c8 83
> e7 10 89 c3 75
> Apr 30 01:15:32 polb01 <6>note: khubd[5455] exited with preempt_count 2
Looks like this is coming from here:
dev_dbg (hcd->self.controller,
"shutdown urb %p pipe %08x ep%d%s%s\n",
urb, tmp, usb_pipeendpoint (tmp),
(tmp & USB_DIR_IN) ? "in" : "out",
({ char *s; \
switch (usb_pipetype (tmp)) { \
case PIPE_CONTROL: s = ""; break; \
case PIPE_BULK: s = "-bulk"; break; \
case PIPE_INTERRUPT: s = "-intr"; break; \
default: s = "-iso"; break; \
}; s;}));
> This problem happens with and without preemption. Same problem I reported
> with 2.6.6-rc2-bk3 kernel. But for example with 2.6.2 it works fine.
>
>
> 3. When I shutdown my system I get:
>
> Apr 30 01:12:44 polb01 drivers/usb/core/devio.c:290: spin_is_locked on
> uninitialized spinlock de4ad99c.
> Apr 30 01:12:44 polb01 Unable to handle kernel NULL pointer dereference at
> virtual address 0000009a
> Apr 30 01:12:44 polb01 printing eip:
> Apr 30 01:12:44 polb01 e09a0177
> Apr 30 01:12:44 polb01 *pde = 00000000
> Apr 30 01:12:44 polb01 Oops: 0000 [#1]
> Apr 30 01:12:44 polb01 PREEMPT
> Apr 30 01:12:44 polb01 CPU: 0
> Apr 30 01:12:44 polb01 EIP: 0060:[<e09a0177>] Not tainted
> Apr 30 01:12:44 polb01 EFLAGS: 00010086 (2.6.6-rc3-bk1)
> Apr 30 01:12:44 polb01 EIP is at destroy_async+0x87/0x440 [usbcore]
> Apr 30 01:12:44 polb01 eax: de4ad99c ebx: 00000096 ecx: c0474de4
> edx: c0406e98
> Apr 30 01:12:44 polb01 esi: de4ad968 edi: dfbec000 ebp: 00000292
> esp: dfbeddbc
> Apr 30 01:12:44 polb01 ds: 007b es: 007b ss: 0068
> Apr 30 01:12:44 polb01 Process rmmod (pid: 13440, threadinfo=dfbec000
> task=dfa4c720)
> Apr 30 01:12:44 polb01 Stack: e09a7a94 e09a6694 00000122 de4ad99c 00000001
> dfa4e000 e099c5f4 dfa4e000
> Apr 30 01:12:44 polb01 00000081 de4ad99c de307854 e09b2080 de307864
> dfa4e024 e09a071c de4ad968
> Apr 30 01:12:44 polb01 de4ad9b4 e09940fa de307854 de307854 de307864
> de307864 e09b20a0 c032bab4
> Apr 30 01:12:44 polb01 Call Trace:
> Apr 30 01:12:44 polb01 [<e099c5f4>] usb_disable_endpoint+0x74/0x80
> [usbcore]
> Apr 30 01:12:44 polb01 [<e09a071c>] driver_disconnect+0x3c/0x40 [usbcore]
> Apr 30 01:12:44 polb01 [<e09940fa>] usb_unbind_interface+0x7a/0x80
> [usbcore]
> Apr 30 01:12:44 polb01 [<c032bab4>] device_release_driver+0x64/0x70
> Apr 30 01:12:44 polb01 [<c032bc23>] bus_remove_device+0x73/0xc0
> Apr 30 01:12:44 polb01 [<c032aa8c>] device_del+0x6c/0xb0
> Apr 30 01:12:44 polb01 [<c032aae3>] device_unregister+0x13/0x30
> Apr 30 01:12:44 polb01 [<e099c6d0>] usb_disable_device+0x70/0xb0 [usbcore]
> Apr 30 01:12:44 polb01 [<e0994d3b>] usb_disconnect+0xbb/0x110 [usbcore]
> Apr 30 01:12:44 polb01 [<e0994d7e>] usb_disconnect+0xfe/0x110 [usbcore]
> Apr 30 01:12:44 polb01 [<e099f730>] usb_hcd_pci_remove+0x80/0x180
> [usbcore]
> Apr 30 01:12:44 polb01 [<c02f080b>] pci_device_remove+0x3b/0x40
> Apr 30 01:12:44 polb01 [<c032bab4>] device_release_driver+0x64/0x70
> Apr 30 01:12:44 polb01 [<c032bae0>] driver_detach+0x20/0x30
> Apr 30 01:12:44 polb01 [<c032bd8b>] bus_remove_driver+0x5b/0xa0
> Apr 30 01:12:44 polb01 [<c032c21a>] driver_unregister+0x1a/0x46
> Apr 30 01:12:44 polb01 [<c014084d>] __try_stop_module+0x2d/0x53
> Apr 30 01:12:44 polb01 [<c02f0a06>] pci_unregister_driver+0x16/0x30
> Apr 30 01:12:44 polb01 [<e0ae488f>] uhci_hcd_cleanup+0xf/0x61 [uhci_hcd]
> Apr 30 01:12:44 polb01 [<c013dab0>] sys_delete_module+0x140/0x1b0
> Apr 30 01:12:44 polb01 [<c01049e5>] sysenter_past_esp+0x52/0x71
> Apr 30 01:12:44 polb01
> Apr 30 01:12:44 polb01 Code: 8b 53 04 8b 03 89 50 04 89 02 89 5b 04 89 1b
> 81 7e 34 3c 4b
> Apr 30 01:12:44 polb01 <6>note: rmmod[13440] exited with preempt_count 1
> Apr 30 01:12:44 polb01 Debug: sleeping function called from invalid
> context at include/linux/rwsem.h:43
> Apr 30 01:12:44 polb01 in_atomic():1, irqs_disabled():0
> Apr 30 01:12:44 polb01 Call Trace:
> Apr 30 01:12:44 polb01 [<c011b637>] __might_sleep+0xb7/0xe0
> Apr 30 01:12:44 polb01 [<c0122ff9>] do_exit+0xb9/0x980
> Apr 30 01:12:44 polb01 [<c0117080>] do_page_fault+0x0/0x52f
> Apr 30 01:12:44 polb01 [<c010543f>] die+0x23f/0x240
> Apr 30 01:12:44 polb01 [<c011725e>] do_page_fault+0x1de/0x52f
> Apr 30 01:12:44 polb01 [<c0119eda>] __wake_up_common+0x3a/0x60
> Apr 30 01:12:44 polb01 [<c02ea6cb>] vscnprintf+0x2b/0x40
> Apr 30 01:12:44 polb01 [<c0117080>] do_page_fault+0x0/0x52f
> Apr 30 01:12:44 polb01 [<c0104c41>] error_code+0x2d/0x38
> Apr 30 01:12:44 polb01 [<e09a0177>] destroy_async+0x87/0x440 [usbcore]
> Apr 30 01:12:44 polb01 [<e099c5f4>] usb_disable_endpoint+0x74/0x80
> [usbcore]
> Apr 30 01:12:44 polb01 [<e09a071c>] driver_disconnect+0x3c/0x40 [usbcore]
> Apr 30 01:12:44 polb01 [<e09940fa>] usb_unbind_interface+0x7a/0x80
> [usbcore]
> Apr 30 01:12:44 polb01 [<c032bab4>] device_release_driver+0x64/0x70
> Apr 30 01:12:44 polb01 [<c032bc23>] bus_remove_device+0x73/0xc0
> Apr 30 01:12:44 polb01 [<c032aa8c>] device_del+0x6c/0xb0
> Apr 30 01:12:44 polb01 [<c032aae3>] device_unregister+0x13/0x30
> Apr 30 01:12:44 polb01 [<e099c6d0>] usb_disable_device+0x70/0xb0 [usbcore]
> Apr 30 01:12:44 polb01 [<e0994d3b>] usb_disconnect+0xbb/0x110 [usbcore]
> Apr 30 01:12:44 polb01 [<e0994d7e>] usb_disconnect+0xfe/0x110 [usbcore]
> Apr 30 01:12:44 polb01 [<e099f730>] usb_hcd_pci_remove+0x80/0x180
> [usbcore]
> Apr 30 01:12:44 polb01 [<c02f080b>] pci_device_remove+0x3b/0x40
> Apr 30 01:12:44 polb01 [<c032bab4>] device_release_driver+0x64/0x70
> Apr 30 01:12:44 polb01 [<c032bae0>] driver_detach+0x20/0x30
> Apr 30 01:12:44 polb01 [<c032bd8b>] bus_remove_driver+0x5b/0xa0
> Apr 30 01:12:44 polb01 [<c032c21a>] driver_unregister+0x1a/0x46
> Apr 30 01:12:44 polb01 [<c014084d>] __try_stop_module+0x2d/0x53
> Apr 30 01:12:44 polb01 [<c02f0a06>] pci_unregister_driver+0x16/0x30
> Apr 30 01:12:44 polb01 [<e0ae488f>] uhci_hcd_cleanup+0xf/0x61 [uhci_hcd]
> Apr 30 01:12:44 polb01 [<c013dab0>] sys_delete_module+0x140/0x1b0
> Apr 30 01:12:44 polb01 [<c01049e5>] sysenter_past_esp+0x52/0x71
> Apr 30 01:12:44 polb01
> Apr 30 01:12:44 polb01 bad: scheduling while atomic!
> Apr 30 01:12:44 polb01 Call Trace:
> Apr 30 01:12:44 polb01 [<c03bc508>] schedule+0x8c8/0x8d0
> Apr 30 01:12:44 polb01 [<c015634b>] unmap_page_range+0x4b/0x80
> Apr 30 01:12:44 polb01 [<c0156548>] unmap_vmas+0x1c8/0x2c0
> Apr 30 01:12:44 polb01 [<c015c455>] exit_mmap+0xd5/0x2c0
> Apr 30 01:12:44 polb01 [<c011c4a4>] mmput+0xb4/0x120
> Apr 30 01:12:44 polb01 [<c0123119>] do_exit+0x1d9/0x980
> Apr 30 01:12:44 polb01 [<c0117080>] do_page_fault+0x0/0x52f
> Apr 30 01:12:44 polb01 [<c010543f>] die+0x23f/0x240
> Apr 30 01:12:44 polb01 [<c011725e>] do_page_fault+0x1de/0x52f
> Apr 30 01:12:44 polb01 [<c0119eda>] __wake_up_common+0x3a/0x60
> Apr 30 01:12:44 polb01 [<c02ea6cb>] vscnprintf+0x2b/0x40
> Apr 30 01:12:44 polb01 [<c0117080>] do_page_fault+0x0/0x52f
> Apr 30 01:12:44 polb01 [<c0104c41>] error_code+0x2d/0x38
> Apr 30 01:12:44 polb01 [<e09a0177>] destroy_async+0x87/0x440 [usbcore]
> Apr 30 01:12:44 polb01 [<e099c5f4>] usb_disable_endpoint+0x74/0x80
> [usbcore]
> Apr 30 01:12:44 polb01 [<e09a071c>] driver_disconnect+0x3c/0x40 [usbcore]
> Apr 30 01:12:44 polb01 [<e09940fa>] usb_unbind_interface+0x7a/0x80
> [usbcore]
> Apr 30 01:12:44 polb01 [<c032bab4>] device_release_driver+0x64/0x70
> Apr 30 01:12:44 polb01 [<c032bc23>] bus_remove_device+0x73/0xc0
> Apr 30 01:12:44 polb01 [<c032aa8c>] device_del+0x6c/0xb0
> Apr 30 01:12:44 polb01 [<c032aae3>] device_unregister+0x13/0x30
> Apr 30 01:12:44 polb01 [<e099c6d0>] usb_disable_device+0x70/0xb0 [usbcore]
> Apr 30 01:12:44 polb01 [<e0994d3b>] usb_disconnect+0xbb/0x110 [usbcore]
> Apr 30 01:12:44 polb01 [<e0994d7e>] usb_disconnect+0xfe/0x110 [usbcore]
> Apr 30 01:12:44 polb01 [<e099f730>] usb_hcd_pci_remove+0x80/0x180
> [usbcore]
> Apr 30 01:12:44 polb01 [<c02f080b>] pci_device_remove+0x3b/0x40
> Apr 30 01:12:44 polb01 [<c032bab4>] device_release_driver+0x64/0x70
> Apr 30 01:12:44 polb01 [<c032bae0>] driver_detach+0x20/0x30
> Apr 30 01:12:44 polb01 [<c032bd8b>] bus_remove_driver+0x5b/0xa0
> Apr 30 01:12:44 polb01 [<c032c21a>] driver_unregister+0x1a/0x46
> Apr 30 01:12:44 polb01 [<c014084d>] __try_stop_module+0x2d/0x53
> Apr 30 01:12:44 polb01 [<c02f0a06>] pci_unregister_driver+0x16/0x30
> Apr 30 01:12:44 polb01 [<e0ae488f>] uhci_hcd_cleanup+0xf/0x61 [uhci_hcd]
> Apr 30 01:12:44 polb01 [<c013dab0>] sys_delete_module+0x140/0x1b0
> Apr 30 01:12:44 polb01 [<c01049e5>] sysenter_past_esp+0x52/0x71
>
> This does not work with 2.6.6-rc2-bk3 too.
This looks like number 2, only more mighty because your system is borked.
> Some details about my system:
>
> Linux version 2.6.6-rc3-bk1 (root@polb01) (gcc version 3.3.3 20040412
> (Gentoo Linux 3.3.3-r3, ssp-3.3-7, pie-8.5.3)) #2 Thu Apr 29 17:55:16 CEST
> 2004
>
>
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 6
> model : 4
> model name : AMD Athlon(tm) processor
> stepping : 2
> cpu MHz : 1001.690
> cache size : 256 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 1
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
> cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
> bogomips : 1982.46
>
>
> MemTotal: 515972 kB
> MemFree: 456432 kB
> Buffers: 5608 kB
> Cached: 37428 kB
> SwapCached: 0 kB
> Active: 25688 kB
> Inactive: 20152 kB
> HighTotal: 0 kB
> HighFree: 0 kB
> LowTotal: 515972 kB
> LowFree: 456432 kB
> SwapTotal: 0 kB
> SwapFree: 0 kB
> Dirty: 20 kB
> Writeback: 0 kB
> Mapped: 8280 kB
> Slab: 7892 kB
> Committed_AS: 29964 kB
> PageTables: 272 kB
> VmallocTotal: 516052 kB
> VmallocUsed: 3748 kB
> VmallocChunk: 512144 kB
> HugePages_Total: 0
> HugePages_Free: 0
> Hugepagesize: 4096 kB
>
>
> Module Size Used by
> bsd_comp 6016 0
> snd_bt87x 15556 0
> tuner 18252 0
> tvaudio 22412 0
> bttv 162380 0
> video_buf 24132 1 bttv
> i2c_algo_bit 9288 1 bttv
> v4l2_common 6208 1 bttv
> btcx_risc 4744 1 bttv
> i2c_core 24324 4 tuner,tvaudio,bttv,i2c_algo_bit
> videodev 10112 1 bttv
> emu10k1_gp 3648 0
> 8139too 29504 0
> mii 5120 1 8139too
> speedtch 20336 1
> uhci_hcd 34832 0
> parport_pc 23872 0
> parport 31296 1 parport_pc
> snd_seq_midi 8672 0
> snd_emu10k1_synth 9664 0
> snd_emux_synth 46464 1 snd_emu10k1_synth
> snd_seq_virmidi 7680 1 snd_emux_synth
> snd_seq_midi_emul 8064 1 snd_emux_synth
> snd_emu10k1 117764 1 snd_emu10k1_synth
> snd_rawmidi 30880 3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1
> snd_ac97_codec 68612 1 snd_emu10k1
> snd_util_mem 4928 2 snd_emux_synth,snd_emu10k1
> snd_hwdep 10052 2 snd_emux_synth,snd_emu10k1
> snd_seq_oss 41664 0
> snd_seq_midi_event 9728 3 snd_seq_midi,snd_seq_virmidi,snd_seq_oss
> snd_seq 70288 8
> snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_oss,s
>nd_seq_midi_event snd_seq_device 8776 7
> snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_rawmidi,snd_s
>eq_oss,snd_seq snd_pcm_oss 55844 0
> snd_pcm 113928 3 snd_bt87x,snd_emu10k1,snd_pcm_oss
> snd_page_alloc 11588 3 snd_bt87x,snd_emu10k1,snd_pcm
> snd_timer 35460 2 snd_seq,snd_pcm
> snd_mixer_oss 20480 1 snd_pcm_oss
> snd 58852 17
> snd_bt87x,snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_rawmi
>di,snd_ac97_codec,snd_util_mem,snd_hwdep,snd_seq_oss,snd_seq_midi_event,snd_
>seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss soundcore
> 11552 2 bttv,snd
> rtc 22108 0
> usbcore 125404 4 speedtch,uhci_hcd
> ntfs 94348 1
> vfat 19008 1
> fat 52192 1 vfat
> dm_mod 45920 0
> msr 3456 0
> edd 10456 0
> cpuid 3136 0
> nvram 14024 0
> cryptoloop 3648 0
> loop 18056 1 cryptoloop
> floppy 65264 0
> pcspkr 4256 0
> analog 12448 0
> gameport 5440 2 emu10k1_gp,analog
> thermal 12624 0
> processor 12516 1 thermal
> evdev 9600 0
> fan 4108 0
> button 6232 0
> ac 4876 0
> psmouse 20104 0
> pppoatm 6656 1
> atm 48468 4 speedtch,pppoatm
> ppp_deflate 6144 0
> zlib_deflate 22232 1 ppp_deflate
> zlib_inflate 22272 1 ppp_deflate
> ppp_generic 41684 7 bsd_comp,pppoatm,ppp_deflate
> slhc 7872 1 ppp_generic
> capability 4228 0
> commoncap 7360 1 capability
> unix 31028 20
>
>
> 0000:00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P]
> System Controller (rev 13)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 176
> Region 0: Memory at d8000000 (32-bit, prefetchable)
> Region 1: Memory at de019000 (32-bit, prefetchable) [size=4K]
> Region 2: I/O ports at d000 [disabled] [size=4]
> Capabilities: [a0] AGP version 2.0
> Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
> HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
> Rate=<none>
>
> 0000:00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P]
> AGP Bridge (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 176
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: dc000000-ddffffff
> Prefetchable memory behind bridge: d0000000-d7ffffff
> BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
>
> 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super
> South] (rev 40)
> Subsystem: ABIT Computer Corp. KG7-Lite Mainboard
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping+ SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0000:00:07.1 IDE interface: VIA Technologies, Inc.
> VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
> (prog-if 8a [Master SecP PriP])
> Subsystem: VIA Technologies, Inc.
> VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 176
> Region 4: I/O ports at d400 [size=16]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0000:00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 1a) (prog-if
> 00 [UHCI])
> Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 176, cache line size 08
> Interrupt: pin D routed to IRQ 11
> Region 4: I/O ports at d800 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0000:00:07.3 USB Controller: VIA Technologies, Inc. USB (rev 1a) (prog-if
> 00 [UHCI])
> Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 176, cache line size 08
> Interrupt: pin D routed to IRQ 11
> Region 4: I/O ports at dc00 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0000:00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
> (rev 40)
> Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin ? routed to IRQ 11
> Capabilities: [68] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0000:00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL-8139/8139C/8139C+ (rev 10)
> Subsystem: Realtek Semiconductor Co., Ltd. RT8139
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 240 (8000ns min, 16000ns max)
> Interrupt: pin A routed to IRQ 11
> Region 0: I/O ports at e000
> Region 1: Memory at de01a000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0-,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0000:00:09.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1
> (rev 08)
> Subsystem: Creative Labs SB Live! 5.1 Model SB0100
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 240 (500ns min, 5000ns max)
> Interrupt: pin A routed to IRQ 9
> Region 0: I/O ports at e400
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0000:00:09.1 Input device controller: Creative Labs SB Live! MIDI/Game
> Port (rev 08)
> Subsystem: Creative Labs Gameport Joystick
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 240
> Region 0: I/O ports at e800
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0000:00:0b.0 Communication controller: 5610 56K FaxModem USR 56k Internal
> WinModem
> Subsystem: 5610 56K FaxModem: Unknown device 00b2
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at de018000 (32-bit, prefetchable)
> Region 1: Memory at de000000 (32-bit, prefetchable) [size=64K]
> Region 2: Memory at de010000 (32-bit, prefetchable) [size=32K]
> Region 3: I/O ports at ec00 [size=64]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
> PME(D0+,D1-,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>
> 0000:00:0d.0 Multimedia video controller: Brooktree Corporation Bt878
> Video Capture (rev 11)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 240 (4000ns min, 10000ns max)
> Interrupt: pin A routed to IRQ 5
> Region 0: Memory at de01b000 (32-bit, prefetchable)
> Capabilities: [44] Vital Product Data
> Capabilities: [4c] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0000:00:0d.1 Multimedia controller: Brooktree Corporation Bt878 Audio
> Capture (rev 11)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 240 (1000ns min, 63750ns max)
> Interrupt: pin A routed to IRQ 5
> Region 0: Memory at de01c000 (32-bit, prefetchable)
> Capabilities: [44] Vital Product Data
> Capabilities: [4c] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0000:01:05.0 VGA compatible controller: nVidia Corporation NV15 [GeForce2
> GTS/Pro] (rev a4) (prog-if 00 [VGA])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 192 (1250ns min, 250ns max)
> Interrupt: pin A routed to IRQ 10
> Region 0: Memory at dc000000 (32-bit, non-prefetchable)
> Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M]
> Capabilities: [60] Power Management version 1
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [44] AGP version 2.0
> Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
> HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
> Rate=<none>
>
>
> Bus 002 Device 001: ID 0000:0000
> Bus 001 Device 003: ID 0130:0130
> Bus 001 Device 002: ID 06b9:4061 Alcatel Telecom Speed Touch ISDN
> Bus 001 Device 001: ID 0000:0000
>
>
> Please fix these bugs because they prevent me from running 2.6.6
> normally... If I can help further mail me.
You can always use another kernel while you are waiting...
> Thanks in advance for your help,
No problem.
> Grzegorz Kulewski
Duncan.
On Fri, Apr 30, 2004 at 09:52:00AM +0200, Duncan Sands wrote:
> (1) get Greg's latest bitkeeper tree (bk://kernel.bkbits.net/gregkh/linux/usb-2.6)
Or if you don't like using bitkeeper, use the latest -mm release. All
of the changes in my tree are in there.
Honestly, I don't see how some of these issues started showing up
between those two kernel releases. You can see the only changes made in
the USB section broken out by patch at:
kernel.org/pub/linux/kernel/people/gregkh/2.6/2.6.6-rc2/
If you want, try reversing those patches one by one against 2.6.6-rc3 to
see which one caused the problems.
thanks,
greg k-h
> Honestly, I don't see how some of these issues started showing up
> between those two kernel releases. You can see the only changes made in
> the USB section broken out by patch at:
> kernel.org/pub/linux/kernel/people/gregkh/2.6/2.6.6-rc2/
Hi Greg, I'm not sure when these problems started showing up, maybe they
have been in 2.6.6- for a while. One patch that may be worth having in 2.6.6
by the way is the one for device_disconnect in devio.c that changes
destroy_all_async to destroy_async_on_interface. It's clearly correct and does
do some good!
Ciao,
Duncan.
On Fri, Apr 30, 2004 at 06:10:56PM +0200, Duncan Sands wrote:
> > Honestly, I don't see how some of these issues started showing up
> > between those two kernel releases. You can see the only changes made in
> > the USB section broken out by patch at:
> > kernel.org/pub/linux/kernel/people/gregkh/2.6/2.6.6-rc2/
>
> Hi Greg, I'm not sure when these problems started showing up, maybe they
> have been in 2.6.6- for a while. One patch that may be worth having in 2.6.6
> by the way is the one for device_disconnect in devio.c that changes
> destroy_all_async to destroy_async_on_interface. It's clearly correct and does
> do some good!
Care to point out which one this was? I'm swimming in a sea of patches
right now :)
thanks,
greg k-h