Andrew,
The uart initialization for CONFIG_SERIAL_TEXT_DEBUG on 83xx was passing
in physical addresses instead of effective. Additional, fix the Kconfig
support to be for all 83xx devices, not just the MPC834x SYS board.
Signed-off-by: Kumar Gala <[email protected]>
---
diff -Nru a/arch/ppc/Kconfig b/arch/ppc/Kconfig
--- a/arch/ppc/Kconfig 2005-03-18 17:15:04 -06:00
+++ b/arch/ppc/Kconfig 2005-03-18 17:15:04 -06:00
@@ -733,7 +733,7 @@
depends on SANDPOINT || MCPN765 || SPRUCE || PPLUS || PCORE || \
PRPMC750 || K2 || PRPMC800 || LOPEC || \
(EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
- MPC834x_SYS
+ 83xx
default y
config FORCE
diff -Nru a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c
--- a/arch/ppc/platforms/83xx/mpc834x_sys.c 2005-03-18 17:15:04 -06:00
+++ b/arch/ppc/platforms/83xx/mpc834x_sys.c 2005-03-18 17:15:04 -06:00
@@ -243,14 +243,14 @@
memset(&p, 0, sizeof (p));
p.iotype = SERIAL_IO_MEM;
- p.membase = (unsigned char __iomem *)immrbar + 0x4500;
+ p.membase = (unsigned char __iomem *)(VIRT_IMMRBAR + 0x4500);
p.uartclk = binfo->bi_busfreq;
gen550_init(0, &p);
memset(&p, 0, sizeof (p));
p.iotype = SERIAL_IO_MEM;
- p.membase = (unsigned char __iomem *)immrbar + 0x4500;
+ p.membase = (unsigned char __iomem *)(VIRT_IMMRBAR + 0x4600);
p.uartclk = binfo->bi_busfreq;
gen550_init(1, &p);