Transform "depends on" into a simpler if-endif block style dependency.
Signed-off-by: Jan Engelhardt <[email protected]>
---
drivers/isdn/Kconfig | 4 ++++
drivers/isdn/capi/Kconfig | 7 ++-----
drivers/isdn/hardware/Kconfig | 1 -
drivers/isdn/hardware/avm/Kconfig | 13 ++++++-------
drivers/isdn/hardware/eicon/Kconfig | 3 +--
5 files changed, 13 insertions(+), 15 deletions(-)
Index: linux-2.6.22-rc3-git1/drivers/isdn/Kconfig
===================================================================
--- linux-2.6.22-rc3-git1.orig/drivers/isdn/Kconfig
+++ linux-2.6.22-rc3-git1/drivers/isdn/Kconfig
@@ -52,8 +52,12 @@ config ISDN_CAPI
hardware, see <http://www.capi.org/>. This is needed for AVM's set
of active ISDN controllers like B1, T1, M1.
+if ISDN_CAPI
+
source "drivers/isdn/capi/Kconfig"
source "drivers/isdn/hardware/Kconfig"
+endif # ISDN_CAPI
+
endif # ISDN
Index: linux-2.6.22-rc3-git1/drivers/isdn/capi/Kconfig
===================================================================
--- linux-2.6.22-rc3-git1.orig/drivers/isdn/capi/Kconfig
+++ linux-2.6.22-rc3-git1/drivers/isdn/capi/Kconfig
@@ -3,7 +3,6 @@
#
config ISDN_DRV_AVMB1_VERBOSE_REASON
bool "Verbose reason code reporting"
- depends on ISDN_CAPI
default y
help
If you say Y here, the CAPI drivers will give verbose reasons for
@@ -12,7 +11,6 @@ config ISDN_DRV_AVMB1_VERBOSE_REASON
config CAPI_TRACE
bool "CAPI trace support"
- depends on ISDN_CAPI
default y
help
If you say Y here, the kernelcapi driver can make verbose traces
@@ -23,7 +21,7 @@ config CAPI_TRACE
config ISDN_CAPI_MIDDLEWARE
bool "CAPI2.0 Middleware support (EXPERIMENTAL)"
- depends on ISDN_CAPI && EXPERIMENTAL
+ depends on EXPERIMENTAL
help
This option will enhance the capabilities of the /dev/capi20
interface. It will provide a means of moving a data connection,
@@ -33,7 +31,6 @@ config ISDN_CAPI_MIDDLEWARE
config ISDN_CAPI_CAPI20
tristate "CAPI2.0 /dev/capi support"
- depends on ISDN_CAPI
help
This option will provide the CAPI 2.0 interface to userspace
applications via /dev/capi20. Applications should use the
@@ -56,7 +53,7 @@ config ISDN_CAPI_CAPIFS
config ISDN_CAPI_CAPIDRV
tristate "CAPI2.0 capidrv interface support"
- depends on ISDN_CAPI && ISDN_I4L
+ depends on ISDN_I4L
help
This option provides the glue code to hook up CAPI driven cards to
the legacy isdn4linux link layer. If you have a card which is
Index: linux-2.6.22-rc3-git1/drivers/isdn/hardware/Kconfig
===================================================================
--- linux-2.6.22-rc3-git1.orig/drivers/isdn/hardware/Kconfig
+++ linux-2.6.22-rc3-git1/drivers/isdn/hardware/Kconfig
@@ -2,7 +2,6 @@
# ISDN hardware drivers
#
comment "CAPI hardware drivers"
- depends on ISDN_CAPI
source "drivers/isdn/hardware/avm/Kconfig"
Index: linux-2.6.22-rc3-git1/drivers/isdn/hardware/avm/Kconfig
===================================================================
--- linux-2.6.22-rc3-git1.orig/drivers/isdn/hardware/avm/Kconfig
+++ linux-2.6.22-rc3-git1/drivers/isdn/hardware/avm/Kconfig
@@ -3,7 +3,6 @@
#
menu "Active AVM cards"
- depends on ISDN_CAPI!=n
config CAPI_AVM
bool "Support AVM cards"
@@ -12,13 +11,13 @@ config CAPI_AVM
config ISDN_DRV_AVMB1_B1ISA
tristate "AVM B1 ISA support"
- depends on CAPI_AVM && ISDN_CAPI && ISA
+ depends on CAPI_AVM && ISA
help
Enable support for the ISA version of the AVM B1 card.
config ISDN_DRV_AVMB1_B1PCI
tristate "AVM B1 PCI support"
- depends on CAPI_AVM && ISDN_CAPI && PCI
+ depends on CAPI_AVM && PCI
help
Enable support for the PCI version of the AVM B1 card.
@@ -30,14 +29,14 @@ config ISDN_DRV_AVMB1_B1PCIV4
config ISDN_DRV_AVMB1_T1ISA
tristate "AVM T1/T1-B ISA support"
- depends on CAPI_AVM && ISDN_CAPI && ISA
+ depends on CAPI_AVM && ISA
help
Enable support for the AVM T1 T1B card.
Note: This is a PRI card and handle 30 B-channels.
config ISDN_DRV_AVMB1_B1PCMCIA
tristate "AVM B1/M1/M2 PCMCIA support"
- depends on CAPI_AVM && ISDN_CAPI
+ depends on CAPI_AVM
help
Enable support for the PCMCIA version of the AVM B1 card.
@@ -50,14 +49,14 @@ config ISDN_DRV_AVMB1_AVM_CS
config ISDN_DRV_AVMB1_T1PCI
tristate "AVM T1/T1-B PCI support"
- depends on CAPI_AVM && ISDN_CAPI && PCI
+ depends on CAPI_AVM && PCI
help
Enable support for the AVM T1 T1B card.
Note: This is a PRI card and handle 30 B-channels.
config ISDN_DRV_AVMB1_C4
tristate "AVM C4/C2 support"
- depends on CAPI_AVM && ISDN_CAPI && PCI
+ depends on CAPI_AVM && PCI
help
Enable support for the AVM C4/C2 PCI cards.
These cards handle 4/2 BRI ISDN lines (8/4 channels).
Index: linux-2.6.22-rc3-git1/drivers/isdn/hardware/eicon/Kconfig
===================================================================
--- linux-2.6.22-rc3-git1.orig/drivers/isdn/hardware/eicon/Kconfig
+++ linux-2.6.22-rc3-git1/drivers/isdn/hardware/eicon/Kconfig
@@ -3,7 +3,6 @@
#
menu "Active Eicon DIVA Server cards"
- depends on ISDN_CAPI!=n
config CAPI_EICON
bool "Support Eicon cards"
@@ -32,7 +31,7 @@ config ISDN_DIVAS_PRIPCI
config ISDN_DIVAS_DIVACAPI
tristate "DIVA CAPI2.0 interface support"
- depends on ISDN_DIVAS && ISDN_CAPI
+ depends on ISDN_DIVAS
help
You need this to provide the CAPI interface
for DIVA Server cards.